How many Heading Types in ALV

Dear All
How many Heading types we can use in ALV header . i know H and A.
can we increase Line space in Header ??
regards
ammad

Hi Ammad again,
This is details regarding header.
Possible values:
                   - (H)eader:    - List header
                                   - only the contents of INFO are
                                     output (KEY is ignored)
                                   - usually one line = one entry
                     Attributes: - left-justified
                                   - bold
                                   - followed by empty line
                   - (S)election: - Important header information, e.g.
                                      currency of amounts in the list
                                   - display format:
                                     KEY(bold) INFO(normal)
                                       Ex.:
                                     KEY   -
INFO----
                                    Currency DEM Ctrl area curr.
                                      Material FGS_TEST Test material
                                   - usually several entries
                                     (one entry per line)
                      Attributes: - left-justified
                                   - bold (KEY=on/INFO=off)
                                   - followed by empty line
                   - (A)ction:    - Action info (see LIBS)
                                    - direct output via table
                                   - only the contents of INFO are
                                     output (KEY is ignored)
                                   - usually one entry
                     Attributes: - left-justified
                                   - normal intensity
Regards,
Vijay

Similar Messages

How many Delta types are availabvle in Lo Extraction

How many Delta types are available in Lo Extraction
please tell me i am facing in every interview.
Thanks in advance,
Ashok V

hi
now three types of update methods are available in Lo extraction
A.Direct Delta:- In case of Direct delta LUWs are directly posted to Delta Queue (RSA7) and we extract the LUWs from Delta Queue to SAP BW by running Delta Loads. If we use Direct Delta it degrades the OLTP system performance because when LUWs are directly posted to Delta Queue (RSA7) the application is kept waiting until all the enhancement code is executed.
B.Queued Delta: - In case of Queued Delta LUWs are posted to Extractor queue (LBWQ), by scheduling the V3 job we move the documents from Extractor queue (LBWQ) to Delta Queue (RSA7) and we extract the LUWs from Delta Queue to SAP BW by running Delta Loads. Queued Delta is recommended by SAP it maintain the Extractor Log which us to handle the LUWs, which are missed.
D.Un serialized V3 Update: - In case of Un serialized V3 update LUWs are posted to Update Queue ( SM13 ), by scheduling the V3 job which move the documents from Extractor queue ( LBWQ ) to Delta Queue ( RSA7 ) and we extract the LUWs from Delta Queue to SAP BW by running Delta Loads. Since the LUWs are not moved in a Serial fashion from Update queue to Delta queue if we have any error document it considers the subsequent documents and no sorting of documents based on the creation time. It improves the OLTP system performance as it forms a segment for one language.
hope this will solve your problem
nagarjuna

By default how many plan types one can create in Hyperion planning applicat

By default how many plan types one can create in Hyperion planning application?

Hi,
By Default,We can create 3 plan types in Hyperion planning application.

How many card types supported by Nokia

Please refer me the list of card type supported by the nokia. e.g(MicroSD, MMC)
Solved!
Go to Solution.

You missed out miniSD.
Happy to have helped forum in a small way with a Support Ratio = 37.0

At most how many usage types can coexist

I just wonder if we can enable all of them
in the same abap+java install.
Any limitation and restriction?
Thanks!

I just wonder if we can enable all of them
in the same abap+java install.
Any limitation and restriction?
Thanks!

How many processes for Start processes

Hi Community,
                        I am new to process chains, I am creating process chains for master data loading. Here I am adding " Execute Info Package " for every Object.After adding 10 different objects system not allowing me to add new process type (" Execute Info Package ") to this list. Please some one tell me max how many process type we can include for a start process.
Regds
Robbie.

Hi Bhanu,
                   I added new process type (Execute Infopackage) for infoobject 0VTYPE to start process variant. When I am trying to Check the process I am getting message called "PROCESS WITH WARNING MESSAGES". And on the context menu of the node to go for Displaying Messages , Too many parallel processes for chosen server .
                     Please let me know if you need any further information.
Regds
Robbie.

How many lines we can print using Non-alv report list ?

Hi Experts,
How many lines we can print using Non-alv report list ?
regards
vishnu

Hi,
It depends on the page size according to the page size we can set the no. of lines as follows,
REPORT program_name NO STANDARD PAGE HEADING
LINE-SIZE 290
LINE-COUNT 65.
Hope it helps you,
Regards,
Abhijit G. Borkar

How many types of function modules are there

hi gurus,
how many types of function modules are there...
what type of function module bapi is....
i don't know much about that...
pls help me...
regards,
praveen

hi
hope it will help you.
<REMOVED BY MODERATOR>
Function Modules Used in Script:
In the Driver Program we must use all or some of the function modules that are listed below to transfer the data.
Open_Form
Close_Form
Start_Form
Write_Form
Write_Form_Lines
End_Form
Control_Form
Read_Form_elements
Read_Form_Lines
Any driver program must contain Open_Form, Close_Form and Write_Form. Other function modules are optional.
OPEN_FORM: This function module opens layout set printing. One must call this function module before he uses any of other layout set function modules like Write_Form, Start_Form, Control_Form etc., You need specify a layout set name in the export parameters of this function module. If nothing is passed to Open_Form then one should use Start_Form function module to open layout set before starting the output. The layout set opened by Open_Form should be closed by Close_Form function module, other wise output doesnt appear. We can use any number of Open_Form, Close_Form functions in one single program. But Close_Form must be there for every Open_Form in the program.
Some of the important export parameters we have to pass to Open_Form function module.
Form: Enter the Layout set name here, which then controls the output formatting. If nothing is specified then we must use Start_Form for opening layout set.
Language: Layout sets are Language dependent. Enter the desired language here. If the entered layout set is not in that language, then the function tries to open the Form entered in its original language. The default value is SY-LANGU.
Device: SAP Script can format a text on different device types. The device can be PRINTER or TELEX, TELEFAX, ABAP and SCREEN.
Dialog: Use parameter DIALOG to determine whether to display a dialog box before printing, in which the user can set several spool parameters for print formatting. Possible values: SPACE displays no print parameter screen. 'X' display print parameter screen. Default value: 'X'
Options: Use parameter OPTIONS to set several options for print formatting. The parameter has the structure ITCPO. The user can change some of the defined settings on the print control screen. The default value for Options is . We will discuss about ITCPO structure in detail later.
Other Export, Import and Exceptions are self-explanatory.
Close_Form: The function module closes the layout set opened using OPEN_FORM. The system executes any terminating processing steps for the last opened layout set. No Export parameters for this Function Module.
Start_Form: In-between the function modules OPEN_FORM and CLOSE_FORM, we can use different layout sets. This allows us to combine several different layout sets into one print output. However, we can combine only those layout sets that have the same page format. To switch layout sets, use the function module START_FORM. If another layout set is still open, we must close it first using END_FORM. If we specify no layout set name when calling START_FORM, the system restarts the last open layout set. If after OPEN_FORM no layout set was activated yet, the system leaves the function module with the exception UNUSED. Some of the important export parameters for this function module are
Form: The parameter contains the name of the layout set you want to use for printing. If you specify no layout set here, the system restarts the last active layout set.
Language: Layout sets are language-dependent. Enter the desired language here. If the layout set does not exist in this language, the system tries to call the layout set in its original language. If the parameter LANGUAGE is empty, the system uses the language of the last active layout set.
Startpage: Usually, SAP script starts with the page specified as start page in the layout set definition. If we want to start output with another layout set page, enter the name of the desired layout set page here. If the desired page is not defined, the system uses the start page defined in the layout set.
Program: To replace program symbols, SAP script must know which active program contains the work areas for the values to be passed. If we omit the parameter, the system searches for the field values in the program that was specified in the parameter OPTIONS (field TDPROGRAM) of OPEN_FORM. If we enter a program name, the system replaces the program symbols with the values from this program up to the next END_FORM.
Exceptions and other Export, Import parameters are self-explanatory.
Write_Form: The system outputs the layout set element specified in parameter ELEMENT into the currently opened layout set. In the parameter WINDOW we can specify the name of a window for the output. Remember that the layout set element must be defined in this window. The parameter FUNCTION specifies how to merge the text lines to be output with any existing contents in the window. In this case, there are differences between the different window types or areas. Some of the important export parameters used in Write_Form.
Element: Specify the name of the text element you want to output into the layout set window specified in the parameter WINDOW. The element must be defined in that layout set window. If you specify no element, the system uses the default element, if one is defined in the layout set.
Window: Specify the name of the window into which you want to output the layout set element specified in the parameter ELEMENT. Default value for Window is MAIN.
Function: The parameter determines how to output the text element into the respective window. The output type depends on the window type and area:
Window Type: MAIN Area: BODY
SET/APPEND: Appends to previous output.
Window Type: Main Area: Top/Bottom and
Window Type: Other than Main and all areas
SET : Delete the old element contents and prints the new elements
APPEND: Appends the new content to existing elements.
Type: The system interprets this parameter only for output to the main window. The parameter determines the area of the main window into which we want to output the element. Possible values: 'TOP' header area
'BODY' main area
'BOTTOM' footer area
Default value: 'BODY'
Write_Form_Lines: This function module outputs the text lines in table LINES into the specified layout set window. The text lines must have the SAP script ITF format. From the data in the text header, the system uses only the field TDSTYLE to apply the formatting attributes defined in the specified style for this text. If the field is empty, the system uses the identically named formatting attributes (character and paragraph formats) of the layout set.
Use parameter WINDOW to specify into which of the windows defined in the layout set we want to output the text. We can specify any window used in the layout set. The parameter FUNCTION determines how to merge the text lines to be output with any existing contents in the window. There are differences between the different window types or areas.
Header: This parameter contains the header of the text module we want to output in the current layout set. For the formatting process, the system uses only the entries in the header fields TDSTYLE and TDFORM. Structure: THEAD
WINDOW: Enter the name of the window into which we want to output the layout set element specified in parameter ELEMENT. Default value: 'MAIN'
FUNCTION: This parameter determines how to output the text element into the respective window. The output type depends on the window type and area: Window type MAIN, area BODY: 'SET' append to previous output 'APPEND' same as SET. DELETE' no effect. Window type MAIN, areas TOP and BOTTOM; all other windows: 'SET' delete old window or area contents and output the element 'APPEND' append the element to the existing elements 'DELETE' no effect Default value: 'SET'
TYPE: The system interprets this parameter only for output to the main window. The parameter determines the area of the main window into which you want to output the element. Possible values: 'TOP' header area 'BODY' main area 'BOTTOM' footer area Default value: 'BODY'
END_FORM: END_FORM ends the currently open layout set and executes the required termination processing. After calling this function module, no more layout set is active. For further output, we must start a new layout set using START_FORM. No Export parameters.
CONTROL_FORM: Use this function module to pass SAP Script Control Commands to the layout set. The Control command is passed through the export parameter COMMAND in quotes.
READ_FORM_ELEMENTS: This function module fills a table with all text elements that appear in one layout set. If we specify no layout set name, the system includes all elements of the currently open layout set. If we specify a layout set, the system uses the information about the active version of the layout set, retrieved from the database. Here we have two export parameters, Form and Language and a table parameter Elements.
READ_FORM_LINES: Use this function module to transfer the lines of a layout set element into an internal table. If we specify no layout set name, the system transfers the text lines of the currently open layout set. If we specify a layout set, the system uses the text lines of the active version of the layout set from the database. The Export parameters are Form, Language, Window and Element. If we pass these 4 parameters the function module returns a table with the lines from layout set.
Function modules are one element. There are no types. However sometimes an RFC enabled function module is referred to as RFC Function module, but really it is just a function module. Also BAPIs are function modules, but are usually referred to as just BAPI as opposed to BAPI Function module.
There is no different function module types , but calling the function module will be different.
check this function calls syntax
1. Calls a function module:
CALL FUNCTION func.
2. Call a function module in a different mode (asynchronous Remote Function Call):
CALL FUNCTION func STARTING NEW TASK taskname.
3. Call a function module in the update task:
CALL FUNCTION func IN UPDATE TASK.
4. Call a function module in a remote system (Remote Function Call, RFC ):
CALL FUNCTION func DESTINATION dest.
5. Asynchronous call to a function module with transactional processing (transactional Remote Function Call):
CALL FUNCTION func IN BACKGROUND TASK.
qRFC with output queue
6. Call a function module that can be activated in the context of enhancements:
CALL CUSTOMER-FUNCTION func.
Cheers,
Chandru
Edited by: Alvaro Tejada Galindo on Feb 27, 2008 11:53 AM

How to display header for secondrary alv list

HI ALL,
WHEN I RAN THIS REPORT HEADER IS COMING FOR FIRST ALV.WHEN I DOUBLE CLICK ON SALES ORDER NUMBER IT SHOWS SECONDARY LIST. FOR THIS SECONDARY LIST HEADER IS NOT COMING.ANY BODY CAN SUGGEST HOW TO FIXZ THIS PROBLEM
REPORT ZMAHI1 LINE-SIZE 30.
TYPE-POOLS : SLIS.
*TYPES : BEGIN OF I_VBAK,
 VBELN TYPE VBAK-VBELN,
 ERDAT TYPE VBAK-ERDAT,
 ERNAM TYPE VBAK-ERNAM,
 ERZET TYPE VBAK-ERZET,
 VTWEG TYPE VBAK-VTWEG,
 VKORG TYPE VBAK-VKORG,
 END OF I_VBAK.
DATA : BEGIN OF IT_VBAK OCCURS 0,
 VBELN TYPE VBAK-VBELN,
 ERDAT TYPE VBAK-ERDAT,
 ERNAM TYPE VBAK-ERNAM,
 ERZET TYPE VBAK-ERZET,
 VTWEG TYPE VBAK-VTWEG,
 VKORG TYPE VBAK-VKORG,
 END OF IT_VBAK.
*DATA : IT_VBAK TYPE STANDARD TABLE OF I_VBAK INITIAL SIZE 0,
 WA_VBAK TYPE I_VBAK.
*TYPES : BEGIN OF I_VBAP,
 VBELN TYPE VBAP-VBELN,
 MATNR TYPE VBAP-MATNR,
 ERZET TYPE VBAP-ERZET,
 POSNR TYPE VBAP-POSNR,
 END OF I_VBAP.
DATA : BEGIN OF IT_VBAP OCCURS 0,
 VBELN TYPE VBAP-VBELN,
 MATNR TYPE VBAP-MATNR,
 ERZET TYPE VBAP-ERZET,
 POSNR TYPE VBAP-POSNR,
 LINE_COLOR(4) TYPE C, "Used to store row color attributes
 END OF IT_VBAP.
*DATA : IT_VBAP TYPE STANDARD TABLE OF I_VBAP INITIAL SIZE 0,
 WA_VBAP TYPE I_VBAP.
DATA : EVENTCAT TYPE SLIS_T_EVENT.
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: FIELDCATALOG TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
 GD_TAB_GROUP TYPE SLIS_T_SP_GROUP_ALV,
 GD_LAYOUT TYPE SLIS_LAYOUT_ALV,
 GD_REPID LIKE SY-REPID.
DATA: I_TITLE_VBAK TYPE LVC_TITLE VALUE 'ALV LIST FIRST'.
DATA: I_TITLE_VBAP TYPE LVC_TITLE VALUE 'ALV LIST SECOND'.
DATA: V_REPID LIKE SY-REPID .
DATA : HEADING TYPE SLIS_T_LISTHEADER.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-T01.
PARAMETERS : P_VBELN TYPE VBAK-VBELN.
SELECTION-SCREEN END OF BLOCK B1.
INITIALIZATION.
V_REPID = SY-REPID.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM BUILT_FIELDCATALOG.
PERFORM E03_EVENTTAB_BUILD USING EVENTCAT[].
PERFORM COMMENT_BUILD USING HEADING[].
PERFORM GRID_DISPLAY.
*& Form GET_DATA
 text
--> p1 text
<-- p2 text
FORM GET_DATA.
SELECT VBELN
 ERDAT
 ERNAM
 ERZET
 VTWEG
 VKORG
 FROM VBAK
 INTO TABLE IT_VBAK
WHERE VBELN EQ P_VBELN.
ENDFORM. " GET_DATA
*& Form BUILT_FIELDCATALOG
 text
--> p1 text
<-- p2 text
FORM BUILT_FIELDCATALOG.
CLEAR I_FIELDCAT.
REFRESH : I_FIELDCAT[].
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-SELTEXT_M = 'SALES DOC NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
WA_FIELDCAT-FIELDNAME = 'ERDAT'.
WA_FIELDCAT-SELTEXT_M = 'Creation Date'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
WA_FIELDCAT-FIELDNAME = 'ERNAM'.
WA_FIELDCAT-SELTEXT_M = 'NAME'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
WA_FIELDCAT-FIELDNAME = 'ERZET'.
WA_FIELDCAT-SELTEXT_M = 'TIME'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
WA_FIELDCAT-FIELDNAME = 'VTWEG'.
WA_FIELDCAT-SELTEXT_M = 'DIS CHANNEL'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
WA_FIELDCAT-FIELDNAME = 'VKORG'.
WA_FIELDCAT-SELTEXT_M = 'SALES ORG'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. " BUILT_FIELDCATALOG
*& Form GRID_DISPLAY
 text
--> p1 text
<-- p2 text
FORM GRID_DISPLAY.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = V_REPID
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
 I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
 IT_FIELDCAT = I_FIELDCAT[]
 I_SAVE = 'A'
 IT_EVENTS = EVENTCAT[]
 TABLES
 T_OUTTAB = IT_VBAK
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GRID_DISPLAY
for header
*& Form HEADER
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 IT_LIST_COMMENTARY = HEADING.
ENDFORM. " HEADER
*& Form E03_EVENTTAB_BUILD
FORM E03_EVENTTAB_BUILD USING E03_LT_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 I_LIST_TYPE = 3
 IMPORTING
 ET_EVENTS = E03_LT_EVENTS.
READ TABLE E03_LT_EVENTS
WITH KEY NAME = SLIS_EV_TOP_OF_PAGE INTO LS_EVENT.
IF SY-SUBRC = 0.
 MOVE 'TOP_OF_PAGE' TO LS_EVENT-FORM.
 APPEND LS_EVENT TO E03_LT_EVENTS.
ENDIF.
DELETE E03_LT_EVENTS WHERE FORM IS INITIAL.
ENDFORM. " E03_EVENTTAB_BUILD
*& Form COMMENT_BUILD
FORM COMMENT_BUILD USING LT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
DATA: W_HEADING TYPE SLIS_LISTHEADER.
DATA: W_HEADING1 TYPE SLIS_LISTHEADER.
CLEAR : W_HEADING, LT_TOP_OF_PAGE.
REFRESH : LT_TOP_OF_PAGE.
W_HEADING-INFO = 'Synopsys World' .
W_HEADING-TYP = 'H'.
APPEND W_HEADING TO LT_TOP_OF_PAGE .
CLEAR W_HEADING .
ENDFORM. " COMMENT_BUILD
end of header portion.
*& Form USER_COMMAND
 text
 -->R_UCOMM text
 -->, text
 -->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
 WHEN '&IC1'.
 IF RS_SELFIELD-FIELDNAME = 'VBELN'.
 PERFORM GETDATA_FROM_VBAP.
 PERFORM BUILD_FIELDCATLOG_IT_VBAP.
 PERFORM BUILD_LAYOUT.
 PERFORM E03_EVENTTAB_BUILD USING EVENTCAT[].
 PERFORM COMMENT_BUILD USING HEADING[].
 PERFORM GRID_DISPLAY1.
 ENDIF.
ENDCASE.
ENDFORM. "user_command
*& Form GETDATA_FROM_VBAP
 text
--> p1 text
<-- p2 text
FORM GETDATA_FROM_VBAP.
DATA: LD_COLOR(1) TYPE C.
SELECT VBELN
 MATNR
 ERZET
 POSNR
 FROM VBAP
 INTO TABLE IT_VBAP
 FOR ALL ENTRIES IN IT_VBAK
WHERE VBELN = IT_VBAK-VBELN.
LOOP AT IT_VBAP .
 LD_COLOR = LD_COLOR + 1.
 IF LD_COLOR = 8.
 LD_COLOR = 1.
 ENDIF.
 CONCATENATE 'C' LD_COLOR '10' INTO IT_VBAP-LINE_COLOR.
 MODIFY IT_VBAP TRANSPORTING LINE_COLOR.
ENDLOOP.
ENDFORM. " GETDATA_FROM_VBAP
*& Form BUILD_FIELDCATLOG_IT_VBAP
 text
--> p1 text
<-- p2 text
FORM BUILD_FIELDCATLOG_IT_VBAP.
CLEAR FIELDCATALOG.
REFRESH : FIELDCATALOG[].
FIELDCATALOG-FIELDNAME = 'VBELN'.
FIELDCATALOG-SELTEXT_M = 'SALES DOC NO'.
FIELDCATALOG-COL_POS = 0.
FIELDCATALOG-OUTPUTLEN = 10.
FIELDCATALOG-EMPHASIZE = 'X'.
FIELDCATALOG-KEY = 'X'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'POSNR'.
FIELDCATALOG-SELTEXT_M = 'PO Item'.
FIELDCATALOG-COL_POS = 1.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MATNR'.
FIELDCATALOG-SELTEXT_M = 'MAT NO'.
FIELDCATALOG-COL_POS = 2.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'ERZET'.
FIELDCATALOG-SELTEXT_M = 'TIME'.
FIELDCATALOG-COL_POS = 3.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
ENDFORM. " BUILD_FIELDCATLOG_IT_VBAP
*& Form GRID_DISPLAY1
 text
--> p1 text
<-- p2 text
FORM GRID_DISPLAY1.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = GD_REPID
 I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
 IS_LAYOUT = GD_LAYOUT
 IT_FIELDCAT = FIELDCATALOG[]
 I_SAVE = 'A'
 IT_EVENTS = EVENTCAT[]
 TABLES
 T_OUTTAB = IT_VBAP
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GRID_DISPLAY1
*& Form BUILD_LAYOUT
 text
--> p1 text
<-- p2 text
FORM BUILD_LAYOUT.
GD_LAYOUT-NO_INPUT = 'X'.
GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
GD_LAYOUT-TOTALS_TEXT = 'Totals'(201).
GD_LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
ENDFORM. " BUILD_LAYOUT

In ur report,
in the rountine GRID_DISPLAY1.
 GD_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = GD_REPID
 I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
 IS_LAYOUT = GD_LAYOUT
 IT_FIELDCAT = FIELDCATALOG[]
 I_SAVE = 'A'
 IT_EVENTS = EVENTCAT[]
 TABLES
 T_OUTTAB = IT_VBAP
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How many types of authentications in sharepoint and how to implement those authentication in sharepoint?

Hi All,
How many types of authentications in sharepoint and how to implement those authentication in sharepoint?
can any one explain the above things with examples?
Thanks in Advance!

In addition to
A Sai Gunaranjan you can also check this URL for Sharepoint 2010:
http://technet.microsoft.com/en-us/library/cc288475(v=office.14).aspx
http://www.codeproject.com/Tips/382312/SharePoint-2010-Form-Based-Authentication
***If my post is answer for your query please mark as answer***
***If my answer is helpful please vote***

How to display total in ALV Header

How to display total in ALV Header?

Hi Venkey,
As far as your issue is concerned I would like to quote my perception.
Create a header internal table with title and number of records.
At the later part of your program you should have found the total number of records ,now assign it to the header internal table and print it.
For further clarification you can go check this link:
http://wiki.sdn.sap.com/wiki/display/ABAP/AddHeadertoALVreport
Thanks
P.Srikanth

How to get header in the ALV report

Hi
I want to print header in the ALV report.But i am not getting that.Plz see my program it is getting error and also not printing header.If there is any error means plz give me the solution.In this program there is an error.
REPORT ZREPORT_ALV .
TYPE-POOLS : slis.
tables:vbak,vbap.
DATA: report_id LIKE sy-repid.
DATA: I_LAYOUT TYPE SLIS_LAYOUT_ALV.
data: heading TYPE slis_t_listheader,
 wa_header TYPE slis_listheader,
 events TYPE slis_t_event.
data: l_string type c.
data: ivariant(1) type c,
 itvariant like disvariant,
 w_variant like disvariant.
initialization.
REPORT_ID = SY-REPID.
PERFORM pgm. "F1000_LAYOUT_INIT. "using I_LAYOUT.
ivariant = 'A'.
*PERFORM init.
itvariant = w_variant.
select-options:so_vbeln for vbap-vbeln.
data:itab like vbak occurs 0 with header line.
data:itab1 like vbap occurs 0 with header line.
start-of-selection.
select * from vbak into table itab where vbeln in so_vbeln.
if not itab[] is initial.
select * from vbap into table itab1
for all entries in itab
where vbeln = itab-vbeln.
endif.
data:ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat1 TYPE slis_t_fieldcat_alv.
****For alv display
IF NOT itab1[] IS INITIAL.
 DEFINE ls_fieldcat.
 add 1 to ls_fieldcat-col_pos.
 ls_fieldcat-fieldname = &1.
 ls_fieldcat-outputlen = &2.
 ls_fieldcat-seltext_l = &3.
 ls_fieldcat-emphasize = &4.
 append ls_fieldcat to lt_fieldcat1.
 clear ls_fieldcat.
END-OF-DEFINITION.
 ls_fieldcat 'VBELN' '10' 'Sales Order Number'.
 ls_fieldcat 'POSNR' '6' 'SO Item'.
 ls_fieldcat 'MATNR' '13' 'Material No'.
m_fieldcat1 'NETWR' '13' 'Amount'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
 IS_LAYOUT = I_LAYOUT
 IT_FIELDCAT = lt_fieldcat1
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = ITVARIANT
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
 T_OUTTAB = itab1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
 I_SAVE = ivariant
CHANGING
 CS_VARIANT = itvariant
EXCEPTIONS
WRONG_INPUT = 1
NOT_FOUND = 2
PROGRAM_ERROR = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM pgm. "F1000_LAYOUT_INIT. "USING I_LAYOUT TYPE SLIS_LAYOUT_ALV.
CLEAR I_LAYOUT.
i_layout-colwidth_optimize = 'X'.
I_LAYOUT-key_hotspot = u2018Xu2019.
I_LAYOUT-hotspot_fieldname = MATNR.
ENDFORM.
*regarding logo and header,,,,
*first store the logo in T-code OAOR, then call that in your report.....
*data: heading TYPE slis_t_listheader,
 wa_header TYPE slis_listheader,
 events TYPE slis_t_event.
To display TOP_OF_PAGE.
FORM top_of_page.
DATA : text(40),txtdt(40).
CLEAR l_string.
l_string = 'JCB India Limited'(hd2).
wa_header-typ = 'H'.
wa_header-info = l_string.
APPEND wa_header TO heading. " index 1.
CLEAR l_string.
WRITE :'Number of records:' TO text,'dbcnt' TO text+20 LEFT-JUSTIFIED.
wa_header-typ = 'S'.
wa_header-info = text.
APPEND wa_header TO heading.
CLEAR l_string.
wa_header-typ = 'S'.
WRITE : 'Report Run Date :' TO txtdt,sy-datum TO txtdt+20 DD/MM/YY.
WRITE sy-datum TO dat DD/MM/YY.
wa_header-info = txtdt.
APPEND wa_header TO heading.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 i_logo = 'ENJOYSAP_LOGO'
 it_list_commentary = heading.
CLEAR heading.
ENDFORM. "top_of_page
*to execute top-of-page you have to create events.
*for ex......
FORM create_event USING p_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 i_list_type = 0
 IMPORTING
 et_events = p_events.
READ TABLE p_events WITH KEY name = slis_ev_top_of_page
 INTO ls_event.
IF sy-subrc = 0.
 MOVE formname_top_of_page TO ls_event-form.
 APPEND ls_event TO p_events.
ENDIF.
ENDFORM. " create_event

Hi,
 Find below code for your question, you may get some idea,,
*& Report ZACTIONGRIDPRACTICE
REPORT ZACTIONGRIDPRACTICE.
*data declarations.....
TYPE-POOLS SLIS.
TABLES : T529T ,PA0000.
data : gd_repid type sy-repid.
DATA : LD_COLOR(10) TYPE N.
DATA : GD_TAB_GROUP TYPE SLIS_T_SP_GROUP_ALV.
Data: is_fieldcat TYPE slis_fieldcat_alv.
DATA : GD_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA : GD_DATUM TYPE DATUM.
DATA : BEGIN OF WA_TABLE,
 MASSN TYPE T529T-MASSN,
 MNTXT TYPE T529T-MNTXT,
 userg type userg,
 TOTAL TYPE I ,
 begda type begda,
 endda type endda,
 april type i,
 SLNO TYPE I,
 LINE_COLOR(4) TYPE C,
 END OF WA_TABLE,
 IT_TABLE LIKE TABLE OF WA_TABLE.
data : april type i.
DATA : TEMP TYPE C.
data : LT_PA0000 TYPE TABLE OF PA0000,
 LT_PA0000_T typE TABLE OF PA0000 with header line.
DATA : IT_FCAT TYPE SLIS_T_FIELDCAT_ALV,
 WA_FCAT LIKE LINE OF IT_FCAT.
DATA : IT_EVENTS TYPE SLIS_T_EVENT,
 WA_EVENTS LIKE LINE OF IT_EVENTS.
 wa_events-form = 'HEADER'.
WA_EVENTS-NAME = 'TOP_OF_PAGE'.
APPEND WA_EVENTS TO IT_EVENTS.
PERFORM HEADER.
DATA : SLNO TYPE I.
DATA : lv_output TYPE dats.
CALL FUNCTION 'ZHR_RE_BE_CALC_START_DATE'
EXPORTING
 id_daberi = sy-datum
IMPORTING
 ed_date_cor = lv_output.
select-options...
selection-screen BEGIN OF BLOCK B WITH FRAME TITLE TEXT-003.
select-options : s_date for sy-datum OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B.
lv_output = sy-datum - 27.
INITIALIZATION.
S_DATE-LOW = lv_output.
S_DATE-HIGH = SY-DATUM.
S_DATE-SIGN = 'I'.
S_DATE-OPTION = 'BT'.
APPEND s_date.
*AT SELECTION-SCREEN ON S_DATE.
*SELECT MASSN INTO TABLE IT_TABLE FROM PA0000 WHERE BEGDA IN S_DATE.
*SELECT STATEMENTS....
start-of-selection.
SELECT t529t~MASSN t529t~MNTXT INTO TABLE IT_table FROM T529T where SPRSL EQ 'E' and t529t~massn in ('10','13','16','20','28','30','45','01','03') .
DATUM IN S_DATE.
PERFORM LAYOUT.
loop at it_table into wa_table.
LD_COLOR = 2.
LD_COLOR = LD_COLOR + 1.
if LD_COLOR = 8.
LD_COLOR = 1.
endif.
concatenate 'C' '1' '11' into wa_table-LINE_COLOR . "='C410'.
modify it_table from wa_table.
endloop.
LOOP AT IT_TABLE INTO WA_TABLE." = 'C410'.
select massn from pa0000 into table lt_pa0000 where begda in s_date and massn = wa_table-massn.
*write : / sy-dbcnt. gt s_date-low and endda lt s_date-high
*DESCRIBE TABLE LT_PA0000_t LINES LV_LINES.
move sy-dbcnt to wa_table-total.
READ TABLE lt_pa0000 INTO LT_PA0000_T WITH KEY MASSN = wa_TABLE-MASSN BINARY SEARCH.
DESCRIBE TABLE LT_PA0000_t LINES LV_LINES.
MOVE LV_LINES to wa_TABLE-TOTAL.
MODIFY IT_TABLE FROM WA_TABLE.
MOVE SY-TABIX TO WA_TABLE-SLNO.
MODIFY IT_TABLE FROM WA_TABLE.
REFRESH : LT_PA0000_t.
CLEAR : LV_LINES.
ENDLOOP.
loop at it_table into wa_table.
SELECT MASSN FROM PA0000 INTO TABLE lt_pa0000 where begda between '01.02.2008' and '20.02.2008'.
MOVE SY-DBCNT TO WA_TABLE-APRIL.
MODIFY IT_TABLE FROM WA_TABLE.
*endloop.
*PERFORM STATEMENTS...
PERFORM FCAT USING '1' 'MASSN' 'ACTIONCODE'.
PERFORM FCAT USING '2' 'MNTXT' 'ACTION TYPE'.
PERFORM fcat USING '3' 'TOTAL' 'TOTAL'.
DEFINE m_fieldcat.
 is_fieldcat-fieldname = &1.
 is_fieldcat-hotspot = &2.
 is_fieldcat-seltext_m = &3.
 is_fieldcat-col_pos = &4.
 is_fieldcat-outputlen = &5.
 is_fieldcat-hotspot = &6.
 append is_fieldcat to it_fcat.
 clear is_fieldcat.
END-OF-DEFINITION.
 m_fieldcat 'SLNO' '' Text-012 '1' '17' ''.
m_fieldcat 'MASSN' '' Text-010 '2' '40' ''.
m_fieldcat 'MNTXT' '' Text-009 '3' '50' '' .
m_fieldcat 'TOTAL' '' Text-011 '4' '10' 'X'.
m_fieldcat 'april' '' Text-013 '5' '10' 'X'.
*FOR DISPLAYING THE RECORDS...
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
 I_CALLBACK_PROGRAM = gd_repid
IS_LAYOUT = GD_LAYOUT
I_CALLBACK_USER_COMMAND = ' '
 I_GRID_TITLE = 'REPORT'
 IS_LAYOUT = gd_LAYOUT
 IT_FIELDCAT = IT_FCAT
 I_SAVE = 'X'
 IT_EVENTS = IT_EVENTS
TABLES
 T_OUTTAB = IT_TABLE.
**& Form FCAT
*FORM FCAT USING FP_COL_POS
 FP_FIELDNAME
 FP_SELTEXT_M.
WA_FCAT-COL_POS = FP_COL_POS.
WA_FCAT-FIELDNAME = FP_FIELDNAME.
wa_fcat-seltext_m = fp_seltext_m.
APPEND WA_FCAT TO IT_FCAT.
ENDFORM.
*& Form HEADER
 text
--> p1 text
<-- p2 text
form header .
DATA : IT_HEADER TYPE SLIS_T_LISTHEADER,
 WA_HEADER LIKE LINE OF it_header.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = 'ACTION TYPE REPORT'.
APPEND WA_HEADER TO IT_HEADER.
wa_header-typ = 'S'.
wa_header-key = Text-022.
CONCATENATE s_date-low+6(2) '.'
 s_date-low+4(2) '.'
 s_date-low(4)
 temp
 '. TO .'
 s_date-high+6(2) '.'
 s_date-high+4(2) '.'
 s_date-high(4)
 INTO wa_header-info SEPARATED BY space.
APPEND wa_header TO it_header.
CLEAR wa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 IT_LIST_COMMENTARY = IT_HEADER
 I_LOGO = 'HRRU_51050061'.
*select single bstkd into CORRESPONDING FIELDS OF gt_vbkd
*from vbkd where vbeln = rt_outtab-vgbel
*and posnr = '000000'.
*rt_outtab-bstkd = gt_vbkd-bstkd.
ENDFORM. " HEADER
*& Form LAYOUT
 text
--> p1 text
<-- p2 text
FORM LAYOUT .
GD_LAYOUT-NO_INPUT = ''.
gd_layout-colwidth_optimize = ''.
gd_layout-totals_text = 'TOTALS'(201).
gd_layout-info_fieldname = 'LINE_COLOR'.
ENDFORM. " LAYOUT

How many types of tables exists and what are they in data dictionary?

hi,
How many types of tables exists and what are they in data dictionary?
regards.

Hello Liu,
Please search in forum before posting any question .
anyhow check the below link :
http://web.mit.edu/sapr3/dev/sap_table_types.htm
Thanks
Seshu

How many types of ports are there which we use for data transfe in ale/idoc

friends let me know how many types of ports are there which we use for transfering
data in ale/idocs?

Hello,
you can use file port,trnasactional RFC port.FI you are using IDOC-XML conversion combination,then you can XML port also.
Thanks

How many types of errors in process chian

Hello all,
Kindly tell me How many types of all possible errors we can face when we will monitoring the process chain.please reply with all errors and solution for it.its too urgent.

Please search...this has been discussed many times and there is also a blog on it.

How many Heading Types in ALV

Similar Messages

Maybe you are looking for