G4 power keeps reverting to old date

i keep resetting the date on my power book g4. is this a batterry problem?
Als othe battery indicator and warning voice dont match.
Thank you very much for help if any.

Likely a dead PRAM Battery.
http://support.apple.com/kb/TA22660
http://www.powerbookmedic.com/xcart1/_search.php?q=pram+battery
http://www.ifixit.com/Guide/Replacing+a+PowerBook+G4+PRAM+Battery/3662

Similar Messages

Numbers file keeps reverting to old version

I use Numbers (Version 3.5.2) on my MacBook Pro running (Yosemite 10.10.2) and also on my iPad air (running iOS 8.1.3) and iPhone 6 (running iOS 8.1.3). I have a file that I use to keep track of grades that is used across all three devices. In the last month the file keeps reverting back to an old version of the file. After this happens I can go into Numbers on Mac and Select "Revert to..." and select the correct version of the file. I did this yesterday and deliberately reverted to the correct version on the Mac and saved, then opened the iPad, made sure it had the correct version, made a minor change and closed the file. I then opened on the iPhone made sure it was the correct version, made a minor change and saved. I then reopened on the Mac it was the correct version and included the minor changes made on the iPad and iPhone. I saved and then closed the file. Today when I open the file on my Mac, it is back to a version that is over a month old. I again used the "Revert to.." command and was able to get back to the correct version of the file from yesterday. I can't figure out why it keeps reverting to an old version. At first I thought it was pulling in an old version from the iPad or iPhone, but after the experiment yesterday that does not seem likely. Has anyone else had this problem? It is making me seriously question the use of Numbers with documents in the cloud as I can not be certain that the data in the file is correct.
Thanks for any suggestions.

I use Numbers (Version 3.5.2) on my MacBook Pro running (Yosemite 10.10.2) and also on my iPad air (running iOS 8.1.3) and iPhone 6 (running iOS 8.1.3). I have a file that I use to keep track of grades that is used across all three devices. In the last month the file keeps reverting back to an old version of the file. After this happens I can go into Numbers on Mac and Select "Revert to..." and select the correct version of the file. I did this yesterday and deliberately reverted to the correct version on the Mac and saved, then opened the iPad, made sure it had the correct version, made a minor change and closed the file. I then opened on the iPhone made sure it was the correct version, made a minor change and saved. I then reopened on the Mac it was the correct version and included the minor changes made on the iPad and iPhone. I saved and then closed the file. Today when I open the file on my Mac, it is back to a version that is over a month old. I again used the "Revert to.." command and was able to get back to the correct version of the file from yesterday. I can't figure out why it keeps reverting to an old version. At first I thought it was pulling in an old version from the iPad or iPhone, but after the experiment yesterday that does not seem likely. Has anyone else had this problem? It is making me seriously question the use of Numbers with documents in the cloud as I can not be certain that the data in the file is correct.
Thanks for any suggestions.

Dreamweaver template (.dwt) keeps reverting to old version after reopening CS3

I work locally on all files and upload as needed. After chaging template and applying it, I can upload all associated pages just fine. If I close DW and reopen, the old version of the template is there without any changes -- even though I saved the template.
Also, updating the template will change all other web pages except index.html.
Any ideas?
Thanks

Sure. No nested templates to my knowledge -- especially since I only have one template. Look like I have some regions in my index.html that don't match the .dwt -- even though the .dwt was created from the .html. When I tried to update the .html, it really screws up the content. Let's kill the 1st bird first -- why my ,dwt file keeps reverting to an old version. Here is the code for the template. Again, thank you!
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="keywords" content="annapolis, annapolis cove, annapolis cover neighborhood, bay ridge, marina" />
<meta name="description" content="Annapolis Cove is a scenic waterfront community in Annapolis, Maryland, featuring 208 single-family homes, several of which are waterfront. It has a beautiful private marina on Lake Ogleton that leads into the mouth of the Severn River." />
<title>Annapolis Cove</title>
<style type="text/css" media="all">

</style>
<style type="text/css" media="print">

</style>



<style type="text/css">

</style>
<link href="../p7vscroller/s5/p7VSC05.css" rel="stylesheet" type="text/css" media="all" />
<script type="text/javascript" src="../p7vscroller/p7vscscripts.js"></script>
<script type="text/javascript" src="../CSSMenuWriter/cssmw/menu.js"></script>
<style type="text/css" media="all">

</style>

<script type="text/javascript" src="../p7pmm/p7PMMscripts.js"></script>
<link href="../p7pmm/p7PMMh07.css" rel="stylesheet" type="text/css" media="all" />
</head>
<body>
<div id="outerWrapper">
<div class="style1" id="header">
    <div align="center">
      <p><img src="../FinalPicnic.png" alt="Picnic area overlooking the marina" width="904" height="199" /></p>
    </div>
</div>
<div id="contentWrapper">
    <div id="leftColumn1">
      <h2>Board of Directors </h2>
<p><strong>President</strong> - Norm Idelson, <a href="mailto:[email protected]">[email protected]</a></p>
<p><strong>Vice President</strong> - Judy Appleby, <a href="mailto:[email protected]">[email protected]</a></p>
<p><strong>Secretary</strong> - Carol Small, <a href="mailto:[email protected]">[email protected]</a></p>
<p><strong>Treasurer</strong> - Sylvia Stafford<br />
<a href="mailto:[email protected]">[email protected]</a></p>
<p><strong>Members at Large:</strong></p>
<p>Janice Gary, <a href="mailto:[email protected]">[email protected]</a></p>
<p>Gary Lidard, <a href="mailto:[email protected]">[email protected]</a></p>
<p>Ted Rowett, <a href="mailto:[email protected]">[email protected]</a></p>
<hr />
<h2 class="style3">Committee Chairs:</h2>
<p><strong>Accounting Review</strong>: <br />
Al Cipriani and Fred Lounsberry</p>
<p><strong>Architectural Control:</strong><br />
Ann Haller, <a href="mailto:[email protected]" class="style2">[email protected]</a></p>
<p><strong>Common Areas:</strong><br />
George Gonzalez, <a href="mailto:[email protected]">[email protected]</a></p>
<p><strong>Erosion Control:</strong><br />
Vince Ritts, <a href="mailto:[email protected]">[email protected]</a></p>
<p><strong>Hospitality:</strong><br />
Sylvia Stafford, <a href="mailto:[email protected]">[email protected]</a></p>
<p><strong>Marina:</strong> <br />
Bruce Reiter, <a href="mailto:[email protected]">[email protected]</a><a href="mailto:[email protected]"></a></p>
<p><strong>Safety and Security:</strong><br />
Jim Stafford, <a href="mailto:[email protected]">[email protected]</a></p>
<p><strong>Communications</strong>:<br />
Norm Idelson, <a href="mailto:[email protected]">[email protected]</a></p>
</div>
    <div id="rightColumn1">
      <h2>Board News<br />
        <br />
      </h2>
      <div id="p7VSC_1" class="p7VSC05">
        <div class="p7VSC_scrollbox_wrapper">
          <div id="p7VSCb_1" class="p7VSC_scrollbox">
            <div id="p7VSCd_1_c1" class="p7VSC_scrolling">
              <div class="p7VSC_content">
                <h4>                ACPOA Annual Meeting</h4>
                <p>The meeting was held on May 2, 2012. We need15 more votes to reach the quorum. As provided by the bylaws a motion was made and approved to extend the on-line voting in order to try and obtain the required additional votes needed to make the election results official. <strong>If you have not yet voted, please do so ASAP on-line</strong>, using the Votenet system by proceeding to the following <a href="https://vod.votenet.com/ACPOA" target="_blank">link</a> and vote according to the Ballot instructions. Be aware that Fred Lounsberry submitted his name for nomination during tonight’s meeting, and you can vote for him on-line by using the write-in capability should you choose to do so.<br />
                </p>
                <p>Presentations given at the meeting can be found on the <a href="../covedocuments.html">documents page.</a>                  <br />
                </p>
                <h4><strong>Architectural Control Guidelines</strong> </h4>
                <p>If you are planning interior remodeling projects, please note that while indoor renovations do NOT require an application to the Architectural Control Committee, an application is required for outdoor construction support such as dumpsters, storage Pods, and Porta-Potties.</p>
                <p><strong>Safety Committee Tip of the Month </strong>can be found at <a href="../safetyandsecurity.html">this link.</a></p>
                <p><strong>Hospitality Committee</strong></p>
              The Hospitality Committee continues to look for volunteers to assist in coordinating community events. Contact Sylvia Stafford if you'd like to join the Committee, 410-268-9618.</div>
            </div>
          </div>
        </div>
        <div id="p7VSCtb_1" class="p7VSCtoolbar">
          <div class="p7VSCscrollup"><a href="javascript:;" class="p7VSC_up" id="p7VSCbu_1"><em>up</em></a></div>
          <div class="p7VSC_pauseplay"><a href="javascript:;" class="play" id="p7VSCbpp_1"><em>Pause or Play</em></a></div>
          <div class="p7VSCscrolldown"><a href="javascript:;" class="p7VSC_dn" id="p7VSCbd_1"><em>down</em></a></div>
        </div>
        <div id="p7VSCcn_1" class="p7VSCdragchannel">
          <div id="p7VSCdc_1" class="p7VSCdragbar">
            <div id="p7VSCdb_1" class="p7VSCdragCtrl"><a> </a></div>
          </div>
        </div>
        <script type="text/javascript">

      </script>
      </div>
    </div>
    <div id="content">
      <table width="595" border="0" cellspacing="2" cellpadding="2">
        <tr>
          <td width="592"><div id="p7PMM_2" class="p7PMMh07">
            <ul class="p7PMM">
              <li><a href="http://annapoliscove.org">Home</a></li>
              <li><a href="../leadership.html">Leadership</a></li>
              <li><a href="http://annapoliscove.org/coveamenities.html">Cove Amenities</a></li>
              <li><a href="http://annapoliscove.org/covedocuments.html">Other</a>
                  <div>
                    <ul>
                      <li><a href="../architecturalcontrol.html">Architectural Control</a></li>
                      <li><a href="http://annapoliscove.org/bulletinboard.html">Bulletin Board</a></li>
                      <li><a href="../calendar.html">Community Calendar</a></li>
                      <li><a href="http://annapoliscove.org/communityresources.html">Community Resources</a></li>
                      <li><a href="http://annapoliscove.org/covedocuments.html">Cove Documents</a></li>
                    </ul>
                  </div>
              </li>
              <li><a href="http://annapoliscove.org/faqs.html">FAQs</a></li>
            </ul>
            <div class="p7pmmclearfloat"> </div>
            
            
            
            <script type="text/javascript">

            </script>
</div></td>
        </tr>
      </table>
      <h1> </h1>
      <h1>Annapolis Cove</h1>
      <p align="center" sb_id="ms__id1076"><img src="../MtgTimeBanner.png" alt="" width="580" height="50" /></p>
      
      <p sb_id="ms__id1076"><span sb_id="ms__id1077">Annapolis Cove is a scenic waterfront community in Annapolis,   Maryland, featuring 208 single-family homes, several of which are waterfront. It has a   beautiful private marina on Lake Ogleton that leads into the mouth of the Severn   River. On clear days, if you look through the channel, you can see the   Chesapeake Bay Bridge approximately five miles north.</span> The Cove has a recreational area with picnic tables and a basket ball court overlooking the marina. It also has a picturesque pond with large snapping turtles that kids love to watch and feed.</p>
      <p sb_id="ms__id1076">Annapolis Cove is a 10 minute drive from the Annapolis Historic district and less than five minutes from Quiet Waters Park. Quiet Waters has 340 acres consisting of six miles of paved trails for hiking and biking, visitor center,   grandstand for entertainment, ice skating rink, a children's   playground, pavillions for picnics, two fenced dog play areas (one for small   pups, the other for larger breeds), a dog beach, and kayak and paddle boat   rentals.</p>
      <p>Annapolis Cove is 35 miles east of D.C., 32 miles south-east of Baltimore, and 122 miles west of Ocean City, MD</p>
      <p align="center"><img src="../AnnapolisCoveWeb.jpg" alt="Map of the Annapolis Cove Area" width="550" height="410" /></p>
      <p> </p>
      <h1>Annapolis</h1>
      <hr />
      <p>Annapolis has a beautiful downtown historic area with great shops and restaurants. It is also home to the United States Naval Academy and St. John’s College, a   liberal arts college with a history going back to 1696. Annapolis is well known   as a center of sailing and boating in the Mid-Atlantic. <a href="#"></a></p>
    </div>
</div>
<div class="style1" id="footer">
    <div align="center">Copyright 2012, Annapolis Cove. All rights reserved.</div>
</div>
</div>
</body>
</html>

Template parameters showing reverting to old data

Hi I added meta-data using template parameters. For some
reason DW reverted back to showing old meta-data on the page. When
I checked the template parameters fields it showed the latest
meta-data. it just had not been written to the page.
Is this a known bug?

Is that meta data in an editable region?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Steve84" <[email protected]> wrote in
message
news:e7efir$7q5$[email protected]..
> Hi I added meta-data using template parameters. For some
reason DW
> reverted
> back to showing old meta-data on the page. When I
checked the template
> parameters fields it showed the latest meta-data. it
just had not been
> written
> to the page.
>
> Is this a known bug?
>

Safari keeps reverting to old bookmarks

I learned to replace the Library/Safari/bookmarks.plist with one from my Time Machine. It works, but only temporarily. Every few days, it reverts back to the same old ancient set of bookmarks !!! Do I need to replace something else ??

I think I did what you suggested -- but when I went back to enable sync on my phone, suddenly the computer seemed to jump back to the old bookmarks. So, I'm keeping sync off on the phone -- i don't need the bookmarks there anyway -- and see if the computer stays OK -- ??? I'll try the whole process again, another day ! Thanks again for your time ~

It unes keeps reverting to old email adddress

Hi I have recently updated my e mail address and changed my I tunes account to the new address but every time I log on the MAC presents the original account details and I have to manually change the e mail. Also it keeps brininging up the start up tutorial options every time I log in can I stop this. Thanks for reading!

This would be a question for Yahoo.

HT201320 Can't reset email password in settings, keeps reverting to old password

Changed yahoo mail password due to being spoofed I think. When I change it in IPad settings, it will verify ok but when go back to the settings it is the old password in mail settings.

This would be a question for Yahoo.

Iphone 4 ios6 keeps reverting to old e-mail password! :(

Subject says it all!
I notice it after a few days when my outgoing mail starts piling up in the Outbox.
I go into settings, update the password, and it's good for a few days.
I ALREADY DELETED the account and added it back, problem still persists.

If your e-mail account settings arent sticking, thats a issue with your e-mail provider, which from the sounds of it is a third party provider, and not Apple, if that is the case, that you are using a 3rd party e-mail provider you must contact them because that would make it an issue unrelated to apple, but i guess one thing you could try before that just for giggles is a hard reset. Hold the Sleep/Wake Button, and the Home button until you see the Apple logo appear, then go into your mail check your settings and see what happens

I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk. It deleted all new data added since Dec (notes,contacts,texts,pics, info in apps) and reverted back to all my old data. How can I retrieve all the lost data??

I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk. It deleted all new data added since Dec (notes,contacts,texts,pics, info added to apps) and reverted back to all my old data (literally uploaded all of my old texts and 1400 old pics and deleted anything new). How can I retrieve all the lost data?? Please help!!

SkyDaughter29 wrote:
My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes. I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need. It appears Apple does not sync the texts between the iphone and my MacBook Pro.
Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
Best of luck.

The I cloud on mu IPAd keeps reverting to my old password so that I cannot get mail. Sometimes this happens on my iPhone as well. I type in the correct password in the iCloud account and mail account under settings but it always reverts back and prevents

The I cloud on mu IPAd keeps reverting to my old password so that I cannot get mail. Sometimes this happens on my iPhone as well. I type in the correct password in the iCloud account and mail account under settings but it always reverts back and preventsme from getting mail. Can only retrieve mail from i cloud on my competer. Thanks!!!

Why would you delete your iCloud account for a password change with your Yahoo account?
Regardless, if no problem re-creating your iCloud account on your iPad, contact Yahoo technical support.

My calendar keeps deleting new events and if I make a change to an old event it keeps reverting it back to its original time. How do it stop this from happening?

My calendar keeps deleting new events and if I make a change to an old event it keeps reverting it back to its original time. How do it stop this from happening?

How do you update it? Basically what has happened my password was disabled for "security reasons" on sunday (21/10/12), so i tried to reset it, but for some reason i couldnt get into my old email (probably because i havent used it for 2 years), so i read on here i could swap it to a new email that i currently use (which is what i have done) ive swapped everythin over to it (facetime, iCloud etc) but keeps coming up with old email and asking for password

HT3529 My icloud account keeps reverting back to my old account on my iPhone?

Why does my newly created Apple iCloud account keep reverting back to my old account, which happens to be my ex husbands email?

Sign out of the account on the device and sign in with the new account.
Just keep in mind that purchases and content are permanently tied to the account they were acquired with.

Exchange 2007 - ValidPorts key data keep reverting

Randomly on my exchange server (Exchange 2007 SP3 with Rollup 14 on Server 2008 R2, fully patched), the validports registry value data revert from the data I entered to the "default" data. The "default" values I'm describing are machinename:ports
and fqdn:ports. I modify the data to include the external fqdn:ports. I'm not sure what's causing this, this has been happening for a while, though; i.e., since outlook anywhere was initially set up.
Moderator note: I couldn't put this topic into a non-exchange 2013 forum, as I was only presented with 2013 choices in the forum chooser. Please move this topic to the appropriate forum.
EDIT: I can't find any Tasks or items in RSOP that point to this issue. Also, I though this behavior was only present when I rebooted the system, but I just had the data revert after an hour of the system just sitting there.
EDIT: Outlook Anywhere was initially configured using the Exchange Management Console. In the console, if I go to server configuration -> Client Access, go to the server properties -> Outlook Anywhere tab, the External host name field is populated
correctly.
EDIT: Found the answer at http://blogs.technet.com/b/exchange/archive/2008/06/20/3405633.aspx

Hi Macdade,
Glad to know that you have found the answer.
As the blog said, ValidPorts regkey allowing access to ports 6001, 6002, 6004 for both FQDN and Netbios access. If you manually change this regkey, you should expect to be bulldozed by the servicelet.
Thanks for your generous sharing: )
If you have another questions on previous version of Exchange server, please following pics to find the proper Forum so that you can easily get more professional suggestions.
Thanks
Mavis Huang
TechNet Community Support

Changing "Reel" number keeps reverting back to old number.

I have a situation where I changed the reel number on about 75 tapes that I have. After changing the #'s, I noticed that about 65 of the changes kept and about 10 keep reverting back to what they were before I changed them. Any ideas on why this is happening? As an example, I had the tapes numbered as: 1001, 1002, 1003, etc but decided to be more specific with my tape labeling and changed them all to HT1_1001, HT1_1002, HT1_1003, etc. All the changes stuck except for a select few. I've even tried dragging the source quicktime file (which is labeled correctly) back into the project...to no avail.

I don't think I would have thought of that, assuming your capture scratch was all on one drive. Thanks for posting your solution, hardly anyone ever does that around here.
bogiesan

HT204053 I created a new apple id because the previous one no longer exists as email (domain had to be cancelled). I keep seeing the old one pop up in my iPhone for which I don't remember the password. How can I get rid of it???

I created a new apple id because the previous one no longer exists as an email (domain had to be cancelled). I keep seeing the old one pop up in my iPhone for which I don't remember the password. How can I get rid of it??? Or how can I reset the password if the email doesn't exist??? I also tried answering a question (my date of birth) but it says it's wrong.
I'm really frustrated with the apple id!!!
Frustrated!!!

In one of the help pages for managing your Apple ID (http://support.apple.com/kb/HE40), it shows two separate sections, one for Apple ID and one for Primary Email address. When I go to manage my Apple ID, I see only a single section for both. Can the two be 'separated', especially when you face the situation of having to discontinue your email address for some reason?
I also noticed that when navigating to Apple ID Support Communities, it shows my nickname 'dishdy'. How and when did I insert this? In the current sequence for creating an Apple ID I don't see this. In my current profile I don't see this.
In any case, I have freed myself from my previous Apple ID (@artemis.it) on my iPhone.
Thanks for your help.

G4 power keeps reverting to old date

Similar Messages

Maybe you are looking for