Galaxy S6 displays "unknown" from all landline received calls

New Galaxy s6 purchased a few months ago. Noticed "unknown" displayed every time I receive a call from a land line. Worked with local AT&T personnel and an on line technician. They said it's a "known issue", but is it a potientially correctable issue? Could not fix. 5.02 upgrade came out today. Still the same problem. I need caller ID to work on all incoming calls. Need help.

Hi there! @BryCart Thanks for posting your concerns. I’m sorry to hear you are having issues with the caller ID.
So I can further assist you, please private message me by clicking here and provide your name and a good contact number.
Thanks!
Charise

Similar Messages

Galaxy S5... can't make or receive calls

Intermittently the phone portion of my S5 decides to stop working even with full bars and 4g. I was only made aware because it happened during the middle of a call. I still receive data and text but can not make or receive calls (incoming calls go straight to voicemail apparently).
I've looked over the internet and tried the following...
cycling airplane mode
cycling wireless
power cycling
removing battery
re-seating the SIM
wiping the app cache
However, none of that has resolved the issue. I'm open to suggestions outside of hopping clockwise on one foot while juggling.
Thanks for the help.

Hey there, jetxten! I regret that you're having trouble with calls. I'm sure we can help! I've just sent you a direct message. Please reply there. Thanks!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Addresses from all mail received is saves in my address book & I can't delete them!!

How do I stop Firefox from saving the addresses from every email I respond to in my address book. Also, it won't let me delete them.

Well, typically one of the fixes that I would suggest is to try to delete the waiting icons. WIFi in a public places like McDonalds, Starbucks, B&N, etc. is not the greatest and I would avoid those places for downloading and updating apps. But I do realize that not everybody has access to Wifi in their homes.
These are all things that have worked at one time or another for other users. Hopefull one of them will work for you. Just ignore whatever does not apply or anything that you have already tried.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

Display of Phone contacts while receiving call

Hi, I am using BB Q5 with the latest BB10 version. I have lot of contacts in my phone list who have a same name, I save them along with the company they work for and their designation in that company. However, whenever, i receive a call from one of these contacts, only their name is being displayed and not their company name and designation as in my previous BB phones. Can somebody help me resolve this issue? Thanks in advance

Good suggestions above but let's all consider the obvious... Though the number may be new to you, someone else has most likely had that number before you and the person that's texting and calling is prolly trying to call or annoy the old owner of the number.
A quick solution is to answer calls and reply to texts immediately to alert the people that you are the owner of the new number and that they now have the wrong number for whomever they are trying to contact. This will reduce people calling back the wrong number if that makes sense? After all, it's a new number for you so you shouldn't have any worries about answering unknown numbers and etc. until you get popular ha ha!
Alternative is change the number but again, someday someone will call or text that has the wrong number. Unless your provider can guarantee you a fresh number from a fresh exchange batch.
The police thing is over the top and being paranoid imo and is an insane big baby tactic. Don't have the cops laugh at you for such a silly thing that you can take measures to rectify on your own easily.
Get your free mobile me account to track your phone in case of theft and I surely recommend gmail over any other email client for security when using the iphone.

Can't place iPhone call from Mac (can receive calls though)

-MacBook Pro (Retina, 13-inch, Late 2013) with Yosemite (10.10)
-iPhone 5 with iOS 8.1
Both use same iCloud account and same FaceTime account. Both have 'iPhone Cellular Calls' enabled under FaceTime settings.
I cannot place an outgoing call from my Mac. I've been getting an error 'iPhone Calls Not Available. Your iPhone must use the same iCloud and FaceTime account' but it does indeed..
I tried to reboot both devices, signed out/in iCloud, played with the toggle-switches - still nothing. Though when I am receiving an incoming call on iPhone - I can take it on Mac.
The only idea I have - my cellular provider is not supported by Apple FaceTime server so I've been using only AppleID to place FaceTime calls (no phone number used) and it's been working fine up to now. But if you go into FaceTime settings of my iPhone you see 'Activation unsuccessful.'
Can anyone confirm if you can place calls from Mac with having FaceTime activated only by AppleID (no cellular phone number) on your iPhone?
Thanks.

I was able to get it worked after enabling iMessage/FaceTime with my phone number. This issue made me to find out a way to do that -)
In case you are with WIND (Canada) here is the solution to activate FaceTime:
http://www.theonlinemac.com/wind

Can we export DATA from all tables in a schema?

Hi,
I have a question; Can we export all the DATA from all the tables present in the schema to any source (eigther CSV, TXT, DAt, etc..)?
Or
Can I have a PL/SQL procedure to display DATA from all Tables in a schema?
With Best Regards,
- Naveed

Hi,
This is pretty much what you need.
DECLARE
V_COUNT NUMBER;
v_sql varchar2(1000);
IN_OWNER_NAME VARCHAR2(100) := 'AP' ; -- SCHEMA NAME
TYPE T_COL_NAME is table of varchar2(1000) index by binary_integer;
v_col_tbl t_col_name;
BEGIN
FOR i in
(SELECT object_name
FROM dba_objects
 WHERE owner = IN_OWNER_NAME
 AND object_type ='TABLE'
and rownum < 2)
LOOP
v_sql := 'SELECT COUNT(*) FROM ' || i.object_name ;
EXECUTE IMMEDIATE v_sql INTO V_COUNT;
if v_count > 0 then
v_sql := 'SELECT * FROM ' || i.object_name ;
select column_name
bulk collect
into v_col_tbl
from DBA_TAB_COLUMNS
WHERE TABLE_NAME = I.OBJECT_NAME
AND OWNER = IN_OWNER_NAME;
-- start selecting the column and exporting using the column names selected.
end if;
if v_col_tbl.count > 0 then
for i in v_col_tbl.first .. v_col_tbl.last
loop
DBMS_OUTPUT.PUT_lINE(v_col_tbl(i));
end loop;
end if;
DBMS_OUTPUT.PUT_lINE( i.object_name || '-' || v_count);
END LOOP;
END;
- Ronel

B2C ISA / E-Commerce: Displaying products from subcategories

Hi there, perhaps someone can answer my question: Is there any hack to display products from subcategories when the user navigates to a parent category?
Currently a parent category, which has no products itself but only subcategories shows "No products found" when the user clicks on it:
- parent
- - child1
- - child2
- - child3
=> Click on parent: "No products found"
=> Click on child: Displays products from child category
But it should be like that
=> Click on parent: Displays products from all child categories (for example, the newest or randomly the first 20)
=> Click on child: Displays products from child category
Edited by: Thomas Diegelmann on Jan 7, 2009 1:06 PM

Hello Thomas,
For the purpose of (or in the name of) optimized search (from TREX), the Catalog search and display features work only one category or subcategory at a time. This value of current category is used in many places to kind of filter / restrict the query / display.
One of the Catalog classes - GetCategoriesTreeAction recursively goes through the catalog and knows the fact that some are parent and some are child. It keeps the sign notation
+ = Has children but not expanded, will not show
- = Has children and shown now
<no sign> = No children.
Hacking through the code was lot tougher because, you have to deal with other niceities such as
There is no difference between a sub (child) category or a product in a sub category. They are all children in the tree.
Class uses recursion to traverse through the tree and maintain this. Without a very well defined tree structure - such as "We have a main category, one sub category and below this we have another sub-category which has products - if you can define your catalog something like this, then you can break the recursion and and use iteration.
Display of product list in item-pages, like 5 items/page with pagination.
Sort capability
These are all tied very tightly to the current selected categorie in path.
The only easy way will be to rework on your catalog design / structure itself.
In one of our cases we had the following liberty -
the catalog structure was clearly defined for all categories, so, we got rid of recursion,
the catalog was relatively small
We did not use the item page
So, we were able to use the following classes and were able to display the we wanted. We just didn't use the categorieinpath.do
WebCatInfo
WebCatItemList
WebCatItem
WebCatItemComparator - for sorting
Easwar Ram
http://www.parxlns.com

Iphone4,upgrade to IOS7.1.2. Photos associated with contacts display as thumnails when receiving calls. How do I change to full photo?l

IPhone4 Upgraded to IOS 7.1.2. Photos associated with Contacts now display as thumbnail pictures when receiving calls . How do I enlarge display.

You weren't the only one that wanted the full screen photos back. There were a lot of complaints and they are back in iOS 8 but that doesn't help you with iOS 7.1.2 unfortunately.

Problems making & receiving calls

I have just been given a Nokia 95, I have inserted my vodafone contract sim card and everything works appart from making and receiving calls. I have contacted Vodafone and they say they can't help me it's a Nokia issue. Has anybody had this problem or can anybody help?
It displays the message call not allowed?

My sim card is fine and works in other phones.
Things I have tried so far:
Making sure all call barrings are inactive
Making sure all call diverts are inactive
Updating access points via a vodafone download
Updating the whole software of the phone via Nokia

Droid Maxx will not make or receive calls with a full signal

My Droid Maxx has been doing this for the last week or two. It seems to only happen at night though. I have a full 4g LTE signal, however it changes from grey to blue constantly. I am able to text, search the web, or plain just do anything else...other than call out or receive a phone call.
When I try and call it just says dialing or retrying.
Has anyone else had this same issue? I have searched my phone for any time settings that may be keeping me from making or receiving calls during certain hours since this only happens at night when I am at work but have not found anything.

I received a replacement phone and I have duplicated the problem on it. The call problems occur only when Wifi is turned on AND this began AFTER the KitKat release was installed on the phone(s). I noticed a similar complaint in the forum and his timeline suggests that he might be having the same problem. How can I get this investigated?
Thanks
>>Personal information removed to comply with the Verizon Wireless Terms of Service<<
Message was edited by: Verizon Moderator

I cannot make or receive calls with my sim card inserted.

recently had dropped my iphone 5 s and everything works apart from making and receiving call via sim. wifi calls are ok with viber etc.
i had the back case changed but the problem persists. Help!

the guy only charged me for the back case replacement as he could not fix the calls issue - he says it could be a motherboard issue.
I tried a replacement sim card and problem persists
thanks

Lost phone still receiving calls but says offline on find my phone app.

Hey I Lost my phone yesterday I tracked it through the find my iphone app. It pops up but says offline. phone is still receiving calls it rings 4 times then goes to voicemail, so I know its on. anyone have any ideas?

Did you have the passcode lock enabled?
If not, someone can turn Cellular Data off which prevents find my iPhone from working or someone can turn find my iPhone off with the account settings on the iPhone. Either one doesn't prevent the iPhone from placing and receiving calls.

Error : Invalid/unknown SSL header was received from peer

Hi,
I am having Weblogic 8.1 (SP5) Application Server running in US. I have a GUI application which is talking to this application server using SSL protocol. We have same SSL certificates installed machines from where this GUI application is executed.
When I connect to this app. server from India, I am able to connect and do required operations, without any problem
Using same GUI application when a user tries to connect from US, he is able to connect and do some basic operation. But after some time suddenly the connection with the server gets broken and he is not able to do any further operation. After that when he closes the application and tries to connect again, he is able to connect. Again after sometime server communication is broken. But I am able to connect and do operation on the same server and at the same time without any connection break up.
When I checked Weblogic logs (wl-domain.log), I saw the below error printed.
####<Aug 30, 2006 7:54:40 AM CDT> <Warning> <Security> <TANGO2> <DevServer> <ExecuteThread: '24' for queue: 'default'> <<WLS Kernel>> <> <BEA-090476> <Invalid/unknown SSL header was received from peer 220.225.40.242 - 220.225.40.242 during SSL handshake.>
####<Aug 30, 2006 8:07:37 AM CDT> <Error> <HTTP> <TANGO2> <DevServer> <ExecuteThread: '24' for queue: 'default'> <<WLS Kernel>> <> <BEA-101018> <[ServletContext(id=200305,name=DefaultWebApp,context-path=)] Servlet failed with ServletException
java.lang.Throwable: Write Channel Closed
at com.tpt.thresher.servlet.TPTRPCRouterServletSession.doPost(TPTRPCRouterServletSession.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:348)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6981)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3892)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2766)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
But server has not gone down, its up all the time. Only thing is after this error comes up, user is not able to do any operation. He has to close the application and reconnect to the server. This is happening after random operation and there is no particular pattern for this. Server connection gets broken after every 5-10 minutes when connected from US.
Does anyone have any idea why this error comes?
Does it have to do anything with Operation System?

Please clarify. Do you believe that this is a JRockit error? If not, I would recommend one of the WebLogic newsgroups instead.
Cheers -- Henrik

Invalid/unknown SSL header was received from peer nakina-132.nakinasys.loc

Hello,
Using 8.1 I am running in a clustered environment. I have 1 question and 1 issue.
I have an Admin server, a managed server, and a load balancer (as a managed server also). I am trying to enable SSL on the load balancer. My first question is regarding the startup. When I start my managed servers, I noticed them loading the keystores numerous times:
<Nov 16, 2004 2:18:37 PM EST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Nakina\ossFramework\dist\bea\weblogic81\server\lib\DemoTrust.jks.>
<Nov 16, 2004 2:18:37 PM EST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Nakina\ossFramework\dist\j2sdk1.4.2_05\jre\lib\security\cacerts.>
<Nov 16, 2004 2:18:48 PM EST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Nakina\ossFramework\dist\bea\weblogic81\server\lib\DemoTrust.jks.>
<Nov 16, 2004 2:18:48 PM EST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Nakina\ossFramework\dist\j2sdk1.4.2_05\jre\lib\security\cacerts.>
<Nov 16, 2004 2:19:34 PM EST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Nakina\ossFramework\dist\bea\weblogic81\server\lib\DemoTrust.jks.>
<Nov 16, 2004 2:19:34 PM EST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Nakina\ossFramework\dist\j2sdk1.4.2_05\jre\lib\security\cacerts.>
<Nov 16, 2004 2:19:36 PM EST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Nakina\ossFramework\dist\bea\weblogic81\server\lib\DemoTrust.jks.>
<Nov 16, 2004 2:19:36 PM EST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Nakina\ossFramework\dist\j2sdk1.4.2_05\jre\lib\security\cacerts.>
If I enable SSL debug logs I see this exception:
<Nov 16, 2004 2:51:40 PM EST> <Debug> <TLS> <000000> <SSLSetup: loading trusted CA certificates>
<Nov 16, 2004 2:51:40 PM EST> <Debug> <TLS> <000000> <SSLSetup: SSLManager not yet initialized
weblogic.security.service.NotYetInitializedException: [Security:090392]SecurityServiceManager not yet initialized.
 at weblogic.security.service.SecurityServiceManagerDelegateImpl.getSecurityService(SecurityServiceManagerDelegateImpl.java:156)
 at weblogic.security.service.SecurityServiceManager.getSecurityService(SecurityServiceManager.java:175)
 at weblogic.security.utils.SSLSetup.getTrustedCAs(SSLSetup.java:705)
 at weblogic.security.utils.SSLSetup.getSSLContext(SSLSetup.java:548)
 at weblogic.security.SSL.SSLSocketFactory.<init>(SSLSocketFactory.java:71)
 at weblogic.security.SSL.SSLSocketFactory.getJSSE(SSLSocketFactory.java:101)
 at weblogic.net.http.HttpClient.New(HttpClient.java:209)
 at weblogic.net.http.HttpsURLConnection.getHttpClient(HttpsURLConnection.java:246)
 at weblogic.net.http.HttpsURLConnection.connect(HttpsURLConnection.java:217)
 at weblogic.management.Admin.checkAdminServerIsRunning(Admin.java:1545)
 at weblogic.management.Admin.isAdminServerRunning(Admin.java:1617)
 at weblogic.management.Admin.createInstance(Admin.java:1399)
 at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:770)
 at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:670)
 at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:344)
 at weblogic.Server.main(Server.java:32)
It does not seem to stop the server from running and eventually things quiet down. Any reason/need/way to fix this?
Second issue. I am using a servlet through the load balancer to forward to my managed app server. Below is a snippet from my web.xml file:
<servlet>
<servlet-name>HttpClusterServlet</servlet-name>
<servlet-class>weblogic.servlet.proxy.HttpClusterServlet</servlet-class>
<init-param>
<param-name>WebLogicCluster</param-name>
<param-value>nakina-132:9002

</param-value>
</init-param>
<init-param>
<param-name>SecureProxy</param-name>
 <param-value>ON</param-value>
</init-param>
</servlet>
As I understand, this should enable the SSL with the SecureProxy parameter. However I get the error on the managed server running port 9002 as it's SSL port:
<Nov 16, 2004 2:59:22 PM EST> <Warning> <Security> <BEA-090476> <Invalid/unknown SSL header was received from peer nakina-132.nakinasys.local - 192.168.0.87 during SSL handshake.>
If I remove the SecureProxy parameter, I get much more complaining about Plaintext:
<Nov 16, 2004 2:59:22 PM EST> <Warning> <Security> <BEA-090476> <Invalid/unknown SSL header was received from peer nakina-132.nakinasys.local - 192.168.0.87 during SSL handshake.>
<Nov 16, 2004 2:59:22 PM EST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer nakina-132.nakinasys.local - 192.168.0.87 instead of an SSL handshake.>
<Nov 16, 2004 2:59:24 PM EST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer nakina-132.nakinasys.local - 192.168.0.87 instead of an SSL handshake.>
<Nov 16, 2004 2:59:26 PM EST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer nakina-132.nakinasys.local - 192.168.0.87 instead of an SSL handshake.>
So I believe it is trying to use SSL with the SecureProxy parameter set (at least something changes). But why am I still getting the Invalid/unknown SSL header error. Enabling the SSL debug logs does not really provide much more information, that I can see.
All servers are being run through the same domain. SSL is enabled on all servers, and listen ports disabled. My webtier has the transport-guarantee set to CONFIDENTIAL.
Thanks in advance,
Denis.

Hi,
I am also facing the same kind of problem...can anyone assist me?
 
I am facing a problem while configuring the SSL set up for weblogic cluster. (1 Admin server & 2 Managed servers)
 
 
I configured the Keystore & SSL information for all 3 servers in cluster. I also disabled their Listen Ports (http) and enabled SSL Listen Ports (https).
 
 
When I restarted all 3 servers and see the console on admin server (console-->domain-->Servers), I get state="UNKNOWN" for both managed servers. For admin server its "RUNNING".
 
 
Also I get following log entries in Admin server log.
 
<Feb 10, 2006 4:07:32 PM EST> <Warning> <Security> <BEA-090476> <Invalid/unknown SSL header was received from peer >Managed_1_name.domain.com - Managed_1 IP during SSL handshake.>
 
<Feb 10, 2006 4:08:28 PM EST> <Warning> <Security> <BEA-090476> <Invalid/unknown SSL header was received from peer >Managed_2_name.domain.com - Managed_2 IP during SSL handshake.>
 
 
In Managed_1 log :
 
<Feb 10, 2006 4:20:31 PM EST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol T3 was received from peer >Managed_1_name.domain.com - Managed_1 IP instead of an SSL handshake.>
 
 
In Managed_2 log :
 
<Feb 10, 2006 4:24:05 PM EST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol T3 was received from peer >Managed_2_name.domain.com - Managed_2 IP instead of an SSL handshake.>
 
 
Can anyone please help me here and direct me to resolve this problem? What could be the problem area? Do I need to set up anything else?
 
 
Thanks in advance.

Why can't I receive calls from landline phones?

My phone was fine until yesterday. I decided to change my service to another provider and since then I can no longer receive phone calls from landlines to my phone. The phone service has not switched over yet and I still have verizon service and It's the same number, just going to be with a different provider. I can call out and receive calls from cell phones just not landlines, they just go to some voicemail thing. Is this a problem with verizon's service, the fact that the phone is in transition of providers or something else?
Solved!
Go to Solution.

Well, perhaps all the problems aren't gone, I have noise in the line now, and some people who call the line get a taped message, and leave messages on an "answering machine" that is not mine and that I cannot access in any way.
This is not new technology. Come on, Verizon. Why did this stuff work in 1975 and not now?

Galaxy S6 displays "unknown" from all landline received calls

Similar Messages

Maybe you are looking for