Game card

I need to create the constructor -- public Puzzle(int[] numbers) -- to initialize puzzle (9x9 game card) from an array of integers assuming that the parameter array numbers will contain 81 integers between 0 and 9 inclusive. The constructor will have to fill the puzzle row by row.
How would such a constructor look?

'Card game' is pretty broad. What are you trying to accomplish?
Also, I gotta tell you, this probably isn't just lying about for free

Similar Messages

  • GUI of a game card

    I'm looking for a class that implements a GUI of a game card.Any ideeas where should I look for it?
    Thanks,

    'Card game' is pretty broad. What are you trying to accomplish?
    Also, I gotta tell you, this probably isn't just lying about for free

  • X-FI XTREME GAMER CARD IS NOT FOUND BY COMPUTER OR SOFTWARE

    Hello Friends
    Recently i bought a refufbished x-fi gamer card from ebay, its pci card, i tried to instal but the hardware is not getting recognized either by the computer or by the software, when i tried to install the software it says suitable device isnot found and it sto
    ps.
    i changed the card from pci slot to pci extended slot but no change, somewhere i red that if the card is just below the video card then it wont work, im not sure of this, my pci slot is just below the nvidia graphics card. i tried so many times to install the card but its all invain.
    So i am here to get your help, please help me with some suggestions how can i solve this problem, i wanted to enjoy this card.
    My pc is dell precision 670 with xp sp3 on it, i have the antivirus kaspersky internet security 200.
    after placing the card in the pci slot when i start the computer, it doesnt show the new hardware found pop up or the window which should appear to ask for the software.
    thanks and regards
    cmfugen

    Have you disabled onboard sound in the bios? Have you turned off Serial ports and other unneeded things? Do you not have another slot to try the card in? This tells me that you have an IRQ conflict. please list what is currently in the slots now.

  • X-fi xtreme gamer card - LOW VOLUME - unusa

    Problem:
    I'm using the x-fi xtreme gamer card and the Left, Right, Left Rear (LR) and Right Rear (RR) sound is too low. However the RR is slightly more audible for some reason. Bass seems a bit low, but the center speaker makes my ears bleed when volume is put to max (NOTE: low speakers are barely audible, not usable, on max).
    Ownership:
    6-8+ months, and have never gotten it to work correctly.
    Attempts:
    I have searched all over (including this forum) for answers and have only come across a plethora of similiar issues. No resolution seems to work other than " RMA". This forum seems to have NO answers what-so-ever regarding this issue, only a lot of people without $00+ bucks in their pocket and Silicon paper weight. ?
    - All volume options are currently at max
    -various audio devices (swap between [color="#3366ff">Boss Comfort quiet head phones and Razer 5. headphones)
    -disk drivers, updated drivers, Beta drivers
    -swaped PCI slots
    -reinstallation of OS
    -Installed with various OS (32-bit 64-bit)
    -Installed on more than one PC.
    Ironically enough I bought this card because I got ripped off by Razer's sound card product which advertised support for the OS I was using at the time but didnt. So it seems I'm never going to get any good audio out of my computing experience. Please help.

    I don't know if I can be of help either since the symptoms are so strange and different from others on the forum. It really appears to be a cabling issue. Are you using the correct cable "adapter" for that card? The one only Creative Labs sells for $24.99 plus shipping? That adapter features three color-matched plugs, two which have 3-conductor plugs on them for the back surround, side surround and the center/subwoofer. The green one?has a standard 2-conductor plug for the front channels. The other end has eight clearly labelled RCA plugs for hookup to your multi-channel analog inputs on a home theater receiver or equivalent multimedia speaker system. You will most likely need eight double-female adapters to hook up long cables. If you're using some other hookup, it could be the trouble although with so many speakers weak it's even hard to believe for sure that that is the answer. I'm also assuming that you're using the Multi-Channel analog hookup. If you're using the coaxial digital hookup it's a whole different story altogether.
    Phil

  • Extreme gamer card problems

    Intel Core i7 920 2.66Ghz @ 4.00GHz
    Noctua NH-U2P SE366 CPU Cooler
    OCZ Gold 6GB DDR3 PC3-2800C8 600MHz DDR3
    Gigabyte EX58-UD5 Intel X58 Motherboard
    XFX GeForce GTX 295 - PCI-Express 2.0 - 792mb GDDR3
    Zalman ZM750-HP Heatpipe Cooled 750
    Corsair 28GB 2.5" SATA-II Solid State Hard Dri've
    50GB raptor
    2xTB Sata slave
    Just bought a extreme gamer card installed and conected via optical lead to my logic 3. soundstage 5. , when i play bluray it works on 2. but when i move setting on soundstage to 5. background noise and soundtrack still plays but dialogue is missing anyideas what could be wrong?

    Hi, Dave. I am familiar with what we all do by default - since we all google the same info. What I want to know is what the items I am asking about actually do. I've got the vast majority of them figured out - and have a list of what they are and who they belong to and how they are controlled.
    UpdReg.exe and CTXFireg.exe are the ones I am still scratching my head over - because I haven't seen anything definitive posted by someone who is actually "in the know". It's all parrotted information that's been copied from forum to forum over the years - to the point it has become urban legend.
    I've found by experience that assumption is the mother of all screwups. So, I actually want to know, from "someone who has the inside scoop" - what these two utilities actually do. For example, do they do more than one thing? Do they do some sort of housekeeping to restore the volume control levels to the last known-good levels if the machine crashes at shutdown? Do they do that as well as provide the Registration Reminder?
    This thing doesn't get deleted automatically - and it reappears when you reinstall-from-scratch. I'd just like to know what's going on - rather than guess or depend upon hearsay.
    Could a CL Staffer please comment on this? Thanks.

  • XBOX 360 Gamer Card App.

    Hello,
    Here is a fun little app I developed a while ago,
    http://www.frogameleon.com/blog/xbox-360-gamer-card-on-yer-mobile-courtesy-of-flash-lite-2 0
    Basically, once installed it will allow a user to enter their
    gamer tag and display the relevant stats. i.e score, rating and
    last played games, great for bragging rights with your friends !
    You can read more on my blog
    http://www.frogameleon.com/blog/

    Unfortunately, I think those of us still using a 360, got pushed aside when the Xbox One came out. I'd be surprised if we saw any new updates to the 360 app.

  • Xfi extreme gamer card help

    Hi I have the Xfi extreme gamer card. I just reinstalled windows 7 and got the latest drivers from SoundBlaster . The sound seems muffled . I used Daniel Ks driver in the past and it worked well for me but now I get a error- ?setup was unable to detect the card? .

    I can install the XFi Extreme Gamer but the problem is when i restart the computer, the resolution of the monitor drop to 4 bits only. When i check at display card properties, it show this message "This device cannot find enough free resource that it can use". Please help. For the information, my previous sound card is Sound Blaster 5. Li've and i don't have problem with it. My specs:Windows XP SP2RAM 2 GBP4 2.8 GHZ7600 GT (AGP)

  • Online game cards

    I would really like to see best buy start to sell Karma Koins/ Nexon point cards I play a game called Atlantica Online and i constantly buy points too buy items from the games item mall but have to buy other places and really would like to see Best Buy have them so I could have all my gaming supplies in one place!!

    Hey theempororj,
    Thanks for the suggestion!  I will pass that along to the appropriate business teams here at Best Buy Corporate.  We carry a number of other point cards so I could see why you would be interested in the convenience of being able to buy them for Atlantica Online in our stores.

  • Audigy 2 zs gamer card problem or or something wo

    I can install all of the drivers fine but when i run dxdiag i switch to the sound tab and the card is there on the left side but when you look at he driver side its blank except the bottom which says creative but thats all. I've unistalled , installed ,took the card out , then replaced. everything i can think of. I get sound from alot of games but not form Doom 3 and MOH pacific assault. Is it my card or the computer?

    This sounds very similar to my problem (see recent post on Audigy 2 ZS running as emulated. In dxdiag my drivers also don't show up as you describe. Is your card running as emulated (shown on dxdiag after the device name? If so it will only be running software not hardware buffering, which may be why certain software doesn't work. For me Pacific Fighters (flight sim) has triple sounds, crackling, stuttering etc.
    I'm still looking for a solution (tried here, UK Creative forums, PF forum, searching etc.). So far no re-install of drivers works. Auot-update says everything's fine, but it isn't. Have been told to re-install DirctX but you can't uninstall DirctX9c. Will try shifting card to another slot later. IF that doesn't work I may have to re-install XP and start again. Anyway good luck and let us know if you solve the problem, I'll do likewise.

  • Extreme gamer card is dead

    while back in December i bought a sound blaster extreme gamer and in January it died.
    i have tried this card in 3 other computers and it does the same thing the disk and drivers from the site all say can not find the supported product the card is placed in correctly and the red light is on in the back when it says found new hard ware which is about every 20 years it will say multimedia device and then when i try to install the drivers it wont work it does this on my other computers too... what should i do

    If it does the same on 3 computers probably it's really dead. If it's still under the retailer warranty try an exchange, otherwise contact CL's support for a RMA.

  • Does the X-FI I/O Drive work with the X-FI Extreme Gamer Card?

    I have the basic card not the "Fatalitiy" model? Thanks. I need to know before I but the I/O Dri've.

    If the card has a connector like this: Yes, if not then, no.

  • On the three games I play,All the games on the top are not showing so you don't know what games to play & the words else where around the game,like gifts,play, friends,coins & cash &game cards,(the words do not show).So how can I fix this?

    some of your pictures & words are missing on this page as well as the games I play. So I don't know if I putting my questions in the right area. How do I fix this ? Tired of guessing !

    Ok..
    Launch iTunes. From the menu bar top of your screen click Store / Authorize This Computer.
    iTunes seems to have created an identical account
    No... Apple does not "create" an account for you.
    I've had my iPod for somewhere around six years, and have amassed a lot of music during that time and gone through a couple computers
    You've purchased iTunes media all this time and never backed it up?

  • Sound Blaster X-FI Xtreme Gamer Card Trouble With Windows Vi

    Hi, yesterday I installed vista and had no sound, I then updated the drivers for my Sound Blaster X-FI XtremeGamer Card and then the card was detected. The card says the drivers are working and that everything is fine yet I hear no sound, I have messed around with the options unmuting things but nothing seems to work, any help would be great. Thanks, Auro

    Hi, im not tryin to insult ur intelligence but have u checked to make sure the sound is not muted in windows? for some reason my pc mutes the sound randomly when i turn it on (yes im running Vista 64...). This confused the beejesus out of me until i realised what was happening. Now im lucky if my pc actually starts up because of crummy xfi drivers and the BSOD but thats another rant entirely.....
    Jason

  • Need some OO design pointers for a Java card game I wrote for uni

    Hi,
    I hope a few of you Java sifus can help me understand I dilemma I keep finding myself in.
    I created a card game for a university assignment which works great but its not very OO at the moment.
    I only have 3 classes; a Card class, a Deck class and a Game class which contains all my GUI, AI, Game Controller, Player and Hand code.
    The assignment is over but I feel like enhancing the game, adding animation, multiplayer, several AI agents etc.
    The first thing I have attempted is animation and I've hit a brick wall. I am trying to create animation for my card game whereby I have an animation showing the cards being shuffled and then an animation which shows the cards being dealt to the players. The game then commences. The cards on the GUI then need to be clickable (MouseListeners?) to play the game. If you're running Windows 7, load up 'Hearts' and you'll know what I'm trying to achieve.
    I don't understand how the GUI, and Card class need to be seperated so that its good OO.
    If I give you a few snippets of code, it might explain the situation:
    A snippet of my card class is as follows:
    import javax.swing.*;
    public class Card extends JLabel //Each card is a JLabel
         private int value;                    //variable for the value of the card
         private int suit;                         //variable for the suit of the card
         private ImageIcon frontOfCard;     //Displays the image of the front of the cards
         private ImageIcon backOfCard;          //displays the image of the back of the cards
         public Card (int Value, int Suit, ImageIcon front, ImageIcon back)
              value = Value;               
              suit = Suit;               
              frontOfCard = front;     
              backOfCard = back;
              setIcon(backOfCard);     //To make it non-visible when dealt
         }As you can see, each card is a JPanel. I've been told by some I shouldn't extend JPanel but rather that I should have a BufferedImage/Image instance variable for each card as the image of the card. The thing is that I need each card displayed on the GUI which can then be clickable. When it is clicked, it is moved from the players hand, into the players move. - There needs to be an animation showing this.
    I've got the animation code figured out in terms of how to move 'images' around a screen to make a pleasing animation. The problem is there are no clickable listeners for images, so the Images needs to be inside some container; a widget which can fire events - Hence the reason I have chosen to extend JPanel for my Cards.
    and a Deck class, snippet is as follows:
    public class Deck extends JLabel //The deck will be shown on the GUI as a JLabel
         private ArrayList<Card> standardDeck;
         public Deck()
              standardDeck = new ArrayList<Card>();
              ImageIcon cardBack = new ImageIcon("CardBack.png");
              setPreferredSize(new Dimension(90, 135));
              setIcon(cardBack);
              int cardCount = 0;     //This variable counts the cards. Is used to assist in the name generation of the imageicon filename
              String str; //the imageIcon constructor accepts filenames as strings so this string holds the filename of the corresponding card image file.
              for (int a=0; a<4; a++) //putting the cards into the deck with the specifed parameters
                   for (int b=2; b<15; b++)
                        cardCount+=1;     //incrementing the card count (the card files are named 1-52 as integers)
                        str = Integer.toString(cardCount); //Integer is converted to string type before being added to string str variable
                        str += ".png"; //To complete the image filename, ".png" has to be concatenated to the string.
                        standardDeck.add(new Card(b, a, new ImageIcon(str), cardBack)); //creating and then adding the cards
         }This is how I envisage a new class diagram for my game:
    Card class
    Game Class <--- Holds a Deck instance, Players instances, and the GUI instance
    Player Class <-- Will contains hand 'instances' , but I will not create a seperate 'Hand' Class, I will use an ArrayList.
    AI Class extends Player Class
    GUI Class
    Deck Class <-- contains 52 cards
    My question is, how do I show the Cards on the GUI if my Cards are in a Deck and the Deck is held in the Game class?
    Please note that there are 52 cards, so potentially 52 images on the GUI, each of which needs to be clickable. When clicked, the cards are moved about, e.g. from the deck to a players hand, from a players hand back to the deck, from a players hand to a players current move hand.
    etc
    I've read that GUI, program control, and logic should be seperated. If thats the case, what do I have in my GUI class if the Cards (which are JPanels) are held in the Deck class which in turn is held in the Game class?
    Any help on this would be greatly appreciated!
    I know what I have written may not be fully clear. I find it hard sometimes to fully convey a problem at hand. Please let me know if you don't understand what I've written and I'll do my best to explain further.

    Faz_86 wrote:
    Hi,
    I hope a few of you Java sifus can help me understand I dilemma I keep finding myself in.
    I created a card game for a university assignment which works great but its not very OO at the moment.
    I only have 3 classes; a Card class, a Deck class and a Game class which contains all my GUI, AI, Game Controller, Player and Hand code.
    The assignment is over but I feel like enhancing the game, adding animation, multiplayer, several AI agents etc.
    Admirable, and the best way to learn, doing something that interests you.
    The first thing I have attempted is animation and I've hit a brick wall. I am trying to create animation for my card game whereby I have an animation showing the cards being shuffled and then an animation which shows the cards being dealt to the players. The game then commences. The cards on the GUI then need to be clickable (MouseListeners?) to play the game. If you're running Windows 7, load up 'Hearts' and you'll know what I'm trying to achieve.
    I don't understand how the GUI, and Card class need to be seperated so that its good OO.
    If I give you a few snippets of code, it might explain the situation:
    A snippet of my card class is as follows:
    Do a quick Google on the model view controller pattern. Your listeners are your controllers. Your JPanel, JButton, etc. are your view. The AI, Player, Card and Deck (and presumably something like Score) are your model. Your model should be completely testable and not dependent on either the controller or the view. Imagine you could play the game from the command line. Get that working first. Then you can add all the bells and whistles for the UI.
    import javax.swing.*;
    public class Card extends JLabel //Each card is a JLabel
    (redacted)
    As you can see, each card is a JPanel. I've been told by some I shouldn't extend JPanel but rather that I should have a BufferedImage/Image instance variable for each card as the image of the card. The thing is that I need each card displayed on the GUI which can then be clickable. When it is clicked, it is moved from the players hand, into the players move. - There needs to be an animation showing this.Extending JPanel is fine. As you noted, you need something to add listeners to. However, I would separate things a bit. First, a card really only has a rank and suit (and perhaps an association to either the deck or a player holding the card). The notion of setIcon() is where you are tripping up. The card itself exists in memory. You should be able to test a card without using a UI. Create a separate class (CardPanel or something similar) that has a reference to a Card and the additional methods needed for your UI.
    I've got the animation code figured out in terms of how to move 'images' around a screen to make a pleasing animation. The problem is there are no clickable listeners for images, so the Images needs to be inside some container; a widget which can fire events - Hence the reason I have chosen to extend JPanel for my Cards.
    and a Deck class, snippet is as follows:
    public class Deck extends JLabel //The deck will be shown on the GUI as a JLabel
         private ArrayList<Card> standardDeck;
         public Deck()
              standardDeck = new ArrayList<Card>();
              ImageIcon cardBack = new ImageIcon("CardBack.png");
              setPreferredSize(new Dimension(90, 135));
              setIcon(cardBack);
              int cardCount = 0;     //This variable counts the cards. Is used to assist in the name generation of the imageicon filename
              String str; //the imageIcon constructor accepts filenames as strings so this string holds the filename of the corresponding card image file.
              for (int a=0; a<4; a++) //putting the cards into the deck with the specifed parameters
                   for (int b=2; b<15; b++)
                        cardCount+=1;     //incrementing the card count (the card files are named 1-52 as integers)
                        str = Integer.toString(cardCount); //Integer is converted to string type before being added to string str variable
                        str += ".png"; //To complete the image filename, ".png" has to be concatenated to the string.
                        standardDeck.add(new Card(b, a, new ImageIcon(str), cardBack)); //creating and then adding the cards
         }This is how I envisage a new class diagram for my game:
    I am not an animation buff, so I will assume the above works.
    Card classRemove the UI aspects to this class, and I think you are all set here.
    Game Class <--- Holds a Deck instance, Players instances, and the GUI instancePresumably this is where main() resides. It will certainly have a reference to model classes (player, game, deck, etc.) and likely the master JFrame (or a controller class you create yourself).
    Player Class <-- Will contains hand 'instances' , but I will not create a seperate 'Hand' Class, I will use an ArrayList.Does a player really have multiple hands? It seems to me more of a one-to-one relationship (or a player has a one-to-many relationship to Card).
    AI Class extends Player ClassWhy extend Player? Create a Player interface, then have a HumanPlayer and AIPlayer implementation. Common parts could be refactored out into either a helper class (delegation) or AbstractPlayer (inheritance).
    GUI ClassMy assumption is that this class has a reference to the master JFrame.
    Deck Class <-- contains 52 cards
    Yes. You may end up recycling this class such that a Deck can also function as a Hand for a given player. If there are differences between the two, create an interface and have a Hand and a Deck implementation. Coding to interfaces is a good thing.
    My question is, how do I show the Cards on the GUI if my Cards are in a Deck and the Deck is held in the Game class?You need to pass a reference to the appropriate view class. That is how MVC works. The controller receives a request from the view, dispatches to some model functionality you write (such as GameRulesEngine, Deck, etc.) and returns a result to the view (which could be the same view or a different one, imagine someone clicking 'high scores').
    Please note that there are 52 cards, so potentially 52 images on the GUI, each of which needs to be clickable. When clicked, the cards are moved about, e.g. from the deck to a players hand, from a players hand back to the deck, from a players hand to a players current move hand.
    etc
    That is up to you to write the animation code. In principle, you have a mouse listener, and then you take the appropriate rendering steps.
    I've read that GUI, program control, and logic should be seperated. If thats the case, what do I have in my GUI class if the Cards (which are JPanels) are held in the Deck class which in turn is held in the Game class?
    See above.
    Any help on this would be greatly appreciated!
    You are welcome.
    I know what I have written may not be fully clear. I find it hard sometimes to fully convey a problem at hand. Please let me know if you don't understand what I've written and I'll do my best to explain further.No, you have been doing fine.
    - Saish

  • Sound Card Hissing/Crackling All The Sudden (Xtreme Gamer)

    Hi All,
    I found these forums after doing some searching and not being able to remedy my problem.
    I have a computer with an ASUS mobo with the X-Fi Xtreme Gamer card. This combo has been working perfectly for me for over a year. I use windows vista. All the sudden the other day my sound is horrible. The music is buried under hissing and crackling and popping. ? I recently switched recievers so I thought the new one may have an issue with the computer. This was not the case though as the card now isn't working properly with my old reciever as well.
    I tried uninstalling the driver, moving the card to a different PCI slot and installing that 2.0 pack. Nothing has worked. ?
    The only thing that seems to be ok is when using headphones. This seems very strange as they are going into the exact same jack that my reciever has always been using.
    I'm hoping and praying that someone out there may have some advice about what I could try to help my situation. I really don't have the money to get a new card right now and feel like this shouldn't be happening as I have only owned it a little over a year and it has always worked with my configuration.
    Thank you so much for taking the time to read this!
    -Clipper

    > I had a problem with lockups and bugs with my sound card, until I reinstalled Daniel's pack.
    Hope this help,
    jmacguire
    ?These drivers are meant to solve crackling and pops and do work with NON Titanium cards. I tested this with a PCI-regular Fatality Pro.
    http://support.creative.com/downloads/welcome.aspx?nDriverType=#type_
    Cheers,
    jmacguire

Maybe you are looking for