Gaming App dont work. very big drop with core speed and fps.

hello. I recently bought MSI R9 290X 4GB gaming and when i install MSI Gaming app and try to run it it shows me "The platform does not support this application.
second when i play or test it 1080p the fps stick to 60 and more but when in game loads of people go in to one place and start fight with boss the framrate drops to 10-18 fps and GPU core speed drops from 1030MHz to 500-600Mhz. How its posible with graphic card allmost from top end in 1080p ???

The CPU stick at max temp 64 its watercooled with 2xnoctua coolers at radiator btw it sits in fractal ARC XL so Airflow its masive in this case 2X140 Fans front 1x 140 bottom 1x 140 exh in the back at top is that rad with noctuas. with all other games is no problem Tomb Raider at full detiles 60+fps midle earth shadow of mordor the same full detiles and its smooth with high fps and gpu core speed stick to max only in GW2 it shows only when its many ppl in the same place during fight with boss the fps drops so low to 10 and gpu core speed drops too like i say before.The fight looks like in link, during normal play fps 30-80 its strange too.not with graphic card like this.i didnt try this from cd cose i dont have and dont use cd-dvdrom.i will try to get them from cd and check.

Similar Messages

Very big problem with JSF about FORM and "id=" for HTML form's elements and

I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
Suppose you have something like this, to render some datas form a Java Beans :
<h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
<h:column>
<f:facet name="header">
<h:outputText value="Name"/>
</f:facet>
<h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
</h:column>
</h:dataTable>
Everything works fine...
Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
<td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
You think you can use the java instructions :
Enumeration NamesParam = request.getParameterNames();
while (NomsParam.hasMoreElements()) {
String NameParam = (String) NamesParam.nextElement();
out.println("<h4>"++NameParam+ "+</h4>);
YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
Edited by: ungars on Jul 18, 2010 12:43 AM
Edited by: ungars on Jul 18, 2010 12:45 AM

While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
"Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
Ed

Since Nov 11 we have very big issues with our emails received via exchange server. Part of them are empty

Since Nov 11 all Iphone and Ipad of our company have very big issues with email synchronization. We all synchronized with Exchange server.
In the past nobaody had issue.
Some of our users have IOS 6 and others IOS 5
Messages arrived empty and it is impossible to download them.
Nobody is able to answer ????
I have the same issue with my personnal Ipad synchronized with exchange also.

This resolution have to attend at the server not with the ios device. My employer's mail administrator reject me to correct it from the server. As his concern is, if ither ios devices works why don't mine? So I am helpless than changing my iphone. It works fine for early versions of ios and with androids. And also one of my friends iphone4 with ios 7 (similar as mine) works too. So I guess it's something wrong with my iPhones settings. But basic question I cannot understand is it works in my phone before this ios7 upgrading. And currently working with my yahoo account too. Favourable reply expected.

My new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

After upgrading to 5.0.1 some of my apps dont work.

i upgraded my ipad 2 to 5.0.1 and garageband nad some other apps dont work anymore.i deleted garageband but cant download it from itunes again becouse it says buy.how can i restore the backup?

If all of your third party apps are crashing - Try downloading another app - any free app is fine and will work - see if that resets the other apps.
If that's not what is happening try a reset - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

I'm trying to play MIDI files in Quicktime. It works buy the volume is very low, even with both Quicktime and computer volume on max. What can I do?

I'm trying to play MIDI files in Quicktime. It works buy the volume is very low, even with both Quicktime and computer volume on max. What can I do?

I'm having the same issue. After opening Audio Midi Setup in Utilities I noticed that the master volume slider of the Built-In Output is very low. I am not able to slide to get any more level out of the system.
Can you adjust the master volume on your system?

I bought a mic for my ipod touch 2nd gen and the mic works yet when its plugged in the speakers dont work, meaning i cant hear, so skype and other similar apps are un-useable, is there a way in which the mic and speakers will both work together?

I bought a mic for my ipod touch 2nd gen and the mic works yet when its plugged in the speakers dont work, meaning i cant hear, so skype and other similar apps are un-useable, is there a way in which the mic and speakers will both work together?

Looking at the details for this mic, it appears that the app has to have the option to use the internal specak when a mic is plugged into the headphone jack. Specifically:
NOTE: When MityMic is plugged into your iPod/iPhone you won’t be able to use the onboard speaker for sound output. You must remove the MityMic then play back your recordings. (The Skype app has an option to enable the onboard speaker even when the mic is plugged in, so you could use MityMic for placing Skype calls. However most other apps do not have this function.)
The above is from:
http://touchmic.com/products-page/view-all-products/touchmic-mitymic---voice-rec ording-and-interview-mic/

After updating to 8.3 so many apps dont work properly. Any body else got this?

After updating to 8.3 so many apps dont work properly. Any body else got this?

This is truthfully a WAG but here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

It seems like a very big 1% with no mail?

it seems like a very big 1% with no mail?
I've had nothing for nearly 3 days - is it just users with @me accounts?

I have had an Apple since 1979 and even owned a computer school using all Apples for 20 years. Apple was always there for us. Never had a problem with Apple products. I'd blame the hackers and competetion and the sick people who are out to destroy instead of building things.
Go here for info:
http://www.apple.com/support/icloud/systemstatus/

I have an iphone 5 on contract with 3 but the speaker isn't working , I've spoken with my provider and they said I need to take it back to an apple store .is this correct ? Many thanks

I have an iphone 5 on contract with 3 but the speaker isn't working , I've spoken with my provider and they said I need to take it back to an apple store .is this correct ? Many thanks

If you received you phone as part of the contract then surely from a legal pov your contract is with 3 not Apple unless you bought Applecare, if you bought your phone outright then put your 3 SIM into it then yes you'd have to visit an Apple store with your phone's purchase receipt.

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

Snow Leopard is a Mac OS X version. You say that it's the version you have in your Mac (10.6.8). Do a back up of your files, format the hard drive (using Disk Utility) and reinstall again

No issues, but curious..why do I always get permissions repaired when I click on 'repair permissions in Disk Utility......it usually has to do with core permissions and it's happened since i got this MacBook Pro in 3/11..it continues with 10.7

No issues, but curious..why do I always get permissions repaired when I click on 'repair permissions' in Disk Utility ??......it usually has to do with core permissions and it's happened since i got this MacBook Pro in 3/11..I'll try this every 2/3 wks and always get repairs.....yet, I don't really have issues....it's been weird.......it continues with 10.7 and the update to 10.7.1.. a sample:
Permissions differ on “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/da.lproj/UIAgent.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/da.lproj/UIAgent.nib”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/da.lproj/MainMenu.nib”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”
Group differs on “Library/Preferences/com.apple.alf.plist”; should be 80; group is 0.
Repaired “Library/Preferences/com.apple.alf.plist”
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.

As described in this article, don't worry about it:
http://support.apple.com/kb/TS1448?viewlocale=en_US

My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?

My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?

I have an external firewire burner; it never shows on the desktop unless I insert a CD or DVD - that icon will then show (if I have my preferences set to show those on the desktop). Hae you checked in Disk Utility (Applications > Utilities) to see if it is listed under drives?

When I used download sets of photos, movies etc, (before I installed Lion) I used always get a "Download" gizmo which showed me the download happening with both speed and time left. Now with Lion, nothing shows on my screen. Can I fix this?

When I used download sets of photos, movies etc, (before I installed Lion) I used always get a "Download" gizmo which showed me the download happening with both speed and time left. Now with Lion, nothing shows on my screen. Can I fix this?

In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

MSI Gaming App Not Working - Fails to open after install - Want to use OC mode

Hi, well today I just recovered my GPU from a near fry using MSI Afterburner. Luckily, with help from a moderator on this site, I was able to get it working again. I thought I fried it trying to OC it. I simply want to be able to switch between the modes it is supposed to come with. I have a MSI R9 290, and it is supposed to be equiped with 3 easy "one click" toggling between OC modes, 1007MHz, Gaming mode, 974MHz, and Silent Mode, 947MHz.
I cannot figure out how to switch between these modes. I used Afterburner and nearly fried my card. I was told not to use that, that is for advanced users, to use instead the (supposed to be bundled, but was not included in my install) MSI Gaming App, to easily switch between the 3 different modes. I downloaded the MSI Gaming App (http://download.msi.com/uti_exe/gamingApp.zip) and installed it. When I tried to run it I get this error:
======
[MSI Gaming App]
The platform does not support this application
(OK)
======
So what does this mean, that the Gaming App is not supported by Windows 7 64Bit Professional (which is what I have)?
Am I doing something wrong, did I install the wrong application. I could not find any others however.
So I damn near fried my GPU trying to use Afterburner to OC my GPU, and I am very hesitant to try using it again. At this point, I have not even reinstalled Afterburner as I fear it might, just by installing, screw me up again.
What should I do, is there anything I CAN do?
Please help this noob- Thanks for your help!
-Kris

based on S/N the card is generic, AMD reference one
those cards don't have factory OC:
http://www.msi.com/product/vga/R9-290X-4GD5-BF4.html#hero-specification
http://www.msi.com/product/vga/R9-290X-4GD5.html#hero-specification
http://www.msi.com/product/vga/R9-290-4GD5.html#hero-specification
http://www.msi.com/product/vga/R9-290-4GD5-BF4.html#hero-specification

Gaming App dont work. very big drop with core speed and fps.

Similar Messages

Maybe you are looking for