Garage Band Issues on MacBook Pro

I thought of posting this on the Garage Band Discussion but it might be unique to MBP. I was literally recording in a garage on Saturday. The first track to go down was drums and bass - 2 1/2 minutes into the recording the same pop up window came up "Coreaudio - Disk space." I looked this up in the "helps" but nothing came up. It was really irritating. It's a brand new computer so it can't be a memory issue. Anyone had the same problem or know what I should do?
Thanks in advance.

gwforeman wrote:
to get Garage Band on my just ordered MPB, I need to purchase iLife?
no, iLife comes free with every new Mac

Similar Messages

I have Garage Band for my Macbook Pro. It runs on OS 10.5.8. Can I buy JamPack loops and sounds for it? Thanks.

Can I purchase JamPack loops and sounds for MacBook Pro, running on OS 10.5.8? I already have Garage Band app.

First you would need to meet these requirements:
To install Mavericks, you need one of these Macs:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory
8 GB or more of available space
Genius bar could help you over the counter
Genius reservation http://www.apple.com/retail/geniusbar/
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard

New to Garage Band and my MacBook Pro

I was wondering if I can use Garage Band to edit preexisting tracks. I am a choreographer and I would like to edit the songs I use for my dances. Can I do that with Garage Band? Can I drop a sound track into Garage Band and edit it to my liking? How would I do that?

Of course garageband can do this but it is really meant more for music creation. But you can just drop the 45 minute track into garageband and use the cycle region function to mark a track and export to itunes. If you plan on doing this often check out http://rogueamoeba.com/fission/. If you have Toast from roxio it also comes with software just for this.

Garage Band for new Macbook Pro?

Am I correct, that to get Garage Band on my just ordered MPB, I need to purchase iLife? I have it for my iPad2. Or can just GB be purchased separate?
Thanks!

gwforeman wrote:
to get Garage Band on my just ordered MPB, I need to purchase iLife?
no, iLife comes free with every new Mac

How do I join two songs on separate tracks on Garage Band for the MacBook Pro?

I have two songs on two separate tracks that I'm trying to join into one. I highlighted both, but when I select edit, "join" isn't an option.

Just in case you have not found the solution on your own after this long wait -
if your tracks are real instrument tracks, "Join" will not work.
To combine the regions in the two tracks into one,
silence all other tracks,
select the regions you want to combine with the cycle region,
and then export this partial song to disk.
Reimport the joined audio file and you are done.
Regards
Léonie

Menu Bar issues on Macbook Pro

I came across this problem with my mac where after logging in I noticed that the menu bar, specifically the battery and wifi icon takes atleast 5-10 mins to appear and when I hover the cursor anywhere on the right side of the menu bar it shows the spinning rainbow. Also the volume button seems to be greyed out as well and usually I have to plug in ear phones and it will go away but only temporarily. This never happened to my mac until today and for some reason I think it has to do with the installation of Adobe CS6 Master Collection. (yes, it was torrented. no, I wont do it again.) I did some slight research and on some website it said that there could be some applications recently installed that could have caused this to happen. If anyone has a solution I would very much appreciate it.

Having the same issue. Macbook Pro 2011, latest Mavericks update ....
Apple menu disappears and reappears when Google Chrome is open/closed. Behaving the same with random programs. Do you have any ideas?? Software is up to date, THANKS!!!

[SOLVED] Linux kernel 3.6.2-1 issues on Macbook Pro 4,1

After my recent system upgrade to linux-3.6.2-1, I ran into a couple noticeable issues on my laptop. The first was the inability to use "mount -i /home/user", which is in my .bash_profile, to mount my encrypted home directory at login. An error message would respond saying that eCryptfs does not support aes. I was able to manually mount it with "mount -t ecryptfs /home/user/.private /home/user", but could not figure out the issue. I also noticed my laptop running a hotter that usual and found that my fans were not changing according to the sensors. I use macfanctld from the AUR to change my fan speed and killing its process and restarting it had no effect. I then decided my recent system upgrade may be at fault so I rebooted into linux-lts and the issues were solved. I then downgraded linux-3.6.2-1, linux-headers-3.6.2-1, nvidia-304.51-4, virtualbox-guest-modules- 4.2.0-6, and virtualbox-host-modules-4.2.0-6 to linux-3.5.6-1, linux-headers-3.5.6-1, nvidia-304.51-3, virtualbox-guest-modules-4.2.0-5, and virtualbox-host-modules-4.2.0-5. These issues are now fixed on my system with the downgrade and I have blocked them from upgrade in pacman.conf. I did not notice any other issues.
Macbook Pro 4,1 (2008)
Graphics: NVIDIA Corporation G84 [GeForce 8600M GT]
uname: Linux archlinux-MBP 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012 x86_64 GNU/Linux
CPU: Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz
I felt it was necessary to post this issue, especially if another person also has it, so that it may be resolved in future kernel updates. If there are any logs or other information people need to help resolve this issue or if I should notify a mod of this or something, please let me know.
Last edited by mojojojo (2012-10-28 21:15:37)

After further investigation the issues were easily solved.
Regarding my encrypted home directory, I checked kernel.log and found that ecryptfs did not like the argument ecrypt_key_bytes=16 and that manual mount has the variable name ecryptfs_key_bytes=16. So I simply changed that in my fstab. Auto-mounting my home directory works nicely again.
In regards to the fan issue, I had to alter /etc/macfanctl.conf because the output of the sensors command (lm-sensors) contained some negative values which may have affected average temperatures and such. I excluded those temperatures and played with the constraints more until the fans spun faster when I felt they should.
Still found it strange that some of these issues happened during kernel upgrades, but glad to have solved the issues.

HT2931 I am trying to figure out how to get the pre made "beats" with my garage band for my MacBook Air can u help

I am trying to figure out how to get the pre made "beats" with my garage band for my MacBook Air can u help

Hello Mattxy2,
Thank you for the question. It sounds like you would like to add some Apple Loops to your project. I recommend reviewing the following sections in Garageband Help:
GarageBand Help - Search for Apple Loops
http://help.apple.com/garageband/mac/10.0/#gbnd3002ab64
GarageBand Help - Add Apple Loops to your projects
http://help.apple.com/garageband/mac/10.0/#gbndc1d3db81
Thank you for using Apple Support Communities.
Best,
Sheila M.

I have heat issues into MacBook pro after installing windows 8. when boot from windows ha've overheating. how can I fix it??

Have heat issues into MacBook pro when boot from windows partition how can I fix it??

panarpan wrote:
Have heat issues into MacBook pro when boot from windows partition how can I fix it??
Are you saying you're running Windows in BootCamp or Windows as a Virtual Machine? You can increase the fan speed on the Mac using smcFanControl and use the software OGELTHORPE recommended to observe improvements.
smcFanControl is a Mac application and doesn't work in Windows, but if you set a higher minimum fan speed (which is how smcFanControl works) while running OS X, when you reboot into a BootCamp partition, that minimum speed tends to be carried over.

I want to download Garage Band on my macbook air

I want to download Garage Band on my macbook air but it says GarageBand can’t be installed on “Mac” because Mac OS X version 10.9.0 or later is required' but there is no update for my macbook air

Sign out of App store.
Launch App store. Sign back in. Try again.

Pdf printing issue in macbook pro

hi everyone,
since i got a macbook pro, i found this problem. it doesn't respond to command-P (printing) at all. i removed and downloaded the newest version of adobe reader, i reset printing system, updated the printer driver,.. i can't print. i use iMac to print pdf. what could i do to fix this? would it be hardware problem or software problem?
thanks for reading it.

I too have an issue w/ my Macbook Pro keyboard (2nd time since I've owned it) although this one isn't quite as severe as the one reported.
I started noticing over the past couple of weeks that when I type, I start hearing this odd "click" sound every once in a while. As I started to pay more attention to it, it appears that every time I hit the letter 'E', it sounds like the plastic beneath the key is loose or breaking (?). They key itself feels loose and I'm worried that its going to pop off. (this has happened on my Dell Inspiron a few times and its been an annoying issue ever since as it regularly pops off now).
Is this something covered under Applecare? (my previous keyboard issue was a couple of dead keys including the spacebar that required a new keyboard).
Also (side question), when I go to the concierge page to setup a time to visit an Apple Genius, there's GUEST and MEMBER login. Is Member login for those who have Applecare? If so, then what would the member number be? The Applecare agreement # doesn't seem to take.
Thanks,

Issue with MacBook Pro charger?

Hello,
I bought my MacBook Pro 15" in October 2009. I hardly ever take it out of my place. Senior Apple adviser told me, that the battery in my computer is factory calibrated, so bassically I treat my laptop as iMac. It's connected to the charger all the time. When I'm done using it, I either put it to sleep or shut it down. Two days ago I noticed: (Not Charging) by the icon of the battery. Apparently the charger stopped charging. It's MagSafe charger with T style connector. From what I've been reading in disscussion forum regarding charger issues, it looks like perhaps this charger needs to be replaced.
But the interesting part is, that the green led on the connector holds steady since (Not Charging) appeared two days ago, and also, the battery power dropped only to 94% and holds steady as well.
So this makes me wonder, is there something wrong with the charger, or is it something else?
My computer knowhow is limited, so any information or tip will be appreciated.
Thanks

http://support.apple.com/kb/TS1713
You can try resetting the SMC http://support.apple.com/kb/ht3964

After several repairs, still having heating issue with MacBook Pro (mid '09)

EDIT: this post got removed the first time for not being constructive enough. I've now edited the post.
This is going to be a lengthy post, so bear with me.
2 months ago, I suddenly noticed my MacBook Pro (medio 2009, 15", 4GB RAM, GeForce 9400M) heating up a lot harder than usual. I'm familiar with the heating issues these laptops have, but this wasn't normal. Looking at iStat Pro, I saw my fans almost taking off like an airplane at 5700 rpm, while watching only a livestream on my browser. I know Shockwave Flash takes up quite a chunk of your CPU, but I had never encountered this problem beforehand.
The biggest problem wasn't just the heat or the fans, but the fact that my computer also started reacting rather slowly. Sometimes I'd even get beachballed, or the whole browser stopped responding for half a minute...
So I tried to see if gaming was still an option. Of course not. I had been playing League of Legends for several months without any issues. Whilst playing, I'd kick up my fans manually to about 4000 rpm, and they'd stay there throughout the whole game. Now, when I start up the game, it plays smoothly for the first 2 minutes. After the temperatures rise to a critical level, the fans start spinning up to 5700 rpm, and the whole game plays like a powerpoint presentation.
On a sidenote: it sort of 'lags' every 1-2 seconds, and sometimes, after a long period, the game acts somewhat normal again (20 mins). This game uses wine to run, which isn't the most optimal way. So I tried playing Team Fortress 2, too. Probably even worse results! (but again noticeable 1-2 second interval lags)
Before anyone starts screaming: "Don't use your Mac for gaming!" etc., I wish to point out that these two games had been running perfectly for the past few months/years. Something's definitely wrong.
After looking for some solutions myself, I decided to go to an authorized Apple Service in my city. A few days later, they told me my logic board was broken, and I had to pay almost 700 euros ($ 900-1000) to replace it. So I did. I got it back, but it wasn't fixed. Brought it back in. Got it back a week later: "Your new logic board we got from Apple was already broken, but we hadn't noticed. We put a new one in it. It's fixed." Again, same problem.
We're almost 2 months later and 700 euros poorer, still no result. I've brought it in about 6-7 times now, here's a list of what they've tried so far:
- In total 3 new logic boards
- New MagSafe (because they discovered it was giving too much power too my laptop)
- Fresh re-install
- Replaced RAM
- Checked fans etc. (they do this by default)
- A few tests which proved that it was repaired (but I have my doubts with these tests...)
They told me now that it's fixed, and they basically won't look into it anymore. I must contact Apple myself, if I wasn't satisfied. The tests they performed showed no signs of heating issues. (One of the tests was playing 4 1080p movies at the same time. When I watch a 1080p movie on Youtube, my laptop is taking off like a plane) They ran a stress test all night long, showing no temperatures above 98°C. I got it up to 105°C in a few minutes according to iStat Pro.
They advised me to install Mountain Lion, which would make the issues with "high-performance sites" go away. I haven't seen much improvement, though.
This whole experience has been quite frustrating, especially now that I'm gonna need my laptop for University again. Isn't there anything I can do? I've paid almost 700 euros and missed my laptop for 2 months, without any results.
I've got more information regarding the issues if needed, ask away. I'm getting desperate.
I've been browsing around the support communites, and found that a lot of people are having issues since they upgraded to OS X Lion. Could this be the case? Should I try downgrading to Snow Leopard?
I've also found a few topics on refreshing the cooling pasta on the heatsink. Would they have noticed any problems with this after replacing the Logic Board several times? Or should I check it myself? I'm not too keen on opening up my laptop myself...
Nick.

Thought of buying Parallels? Fusion?
Might want to see if this gets moved to the MacBook Pro forum.
I'd think Windows 8.1 is smart enough (what I use 90% time since the Dev Preview came out couple yrs ago it seems like) to find the driver.

Issue with MacBook Pro (mid 2009) wifi multiple AP signal 'confusion'

I'll try to explain this as best I can, not being an expert in networking!
I recently upgraded my router from a Linksys WRT160N to an Airport Extreme, in the hope that it would do a better job of broadcasting a stronger wifi signal throughout my house. Whilst it is improved, it's still no good enough for streaming to my iPad 2 where I want in the house. Reading around on the web I discovered that I should be able to use the Linksys as an AP to extend the effective range of my wifi network, as long as it is hardwired into the base station via Ethernet (no WDS support on the Linksys model).
So, I managed to get this all up and running, disabling the dchp on the Linksys, fixed ip allocation etc and using the same SSID and passwords etc. All is well with the iPhone and iPad2 access - they just automatically switch to the strongest signal no problem when I move around the house. Cool.
The issue lies with the MBP - I have a favoured spot in the house where both the broadcast signal from the AEBS and Linksys are very strong, and the MBP gets all confused. opening up the lid from standby it searches for the wifi (bar moving up and down the signal indicator) and then just has an exclamation mark. I try to manually select the SSID but no dice. I have to switch the MBP adaptor off and on, rescan avail networks, and lo and behold two versions of my SSID are shown. Select one and then it connects. However, I have to go through this whole exercise every time I pull the MBP out of standby, which is very irritating.
I do have a workaround - if I name the SSID on the Linksys something different, the problem goes away. However, i effecktively now have 2 wireless networks & I then have to manually switch between the two SSID's to get the strongest signal depending where I am in the house. It's suffices for now but not ideal.
What I don't get is why is it only the MBP affected & the iPhone & iPad 2 are fine? Is this anything to do with the 2.4 ghz & 5 ghz being broadcast by the AEBS getting all mixed up with just the 2.4 ghz being broadcast from the Linksys??? Both 2.4 & 5 ghz are broadcasting the same SSID.
Any help appreciated.

OK - fixed this now. By setting the 5 Ghz channel on the AEBS to a different SSID and putting this to the top of my priority WIFI connections on the MacBook Pro then it ignores the conflict between the 2.4 Ghz networks being broadcast by the Linksys & AEBS. No more hanging connection when I resume the MBP

Resolution issue with macbook pro 13 (late 2013) and dell u2711

I have a Dell U2711 (native resolution 2560x1440) that I use without issue with a macbook pro late 2007 (running 10.10.x), various iMacs and Macbook air 2011 running 10.10. When I say without issue, the display works at its native resolution.
Last week we got a MacBook Pro 13in, late 2013 model.
If I connect this macbook via either thunderbolt connection to the u2711 using either DVI port on the dell, the maximum resolution that I can use is 1920x1080. I am using apple mini displayport to DVI adaptors (I have tried 2 different ones and 2 different DVI cables, with no improvement). Clicking option + scaled in sys prefs does not give the native resolution as an option.
However, I just discovered that if I use a DVI to HDMI adaptor and I connect the macbook to the display I get the full native resolution without issue (2560x1440).
I have zapped the pram, powered down the display etc etc etc and it made no difference.
I would prefer to use the mini DIsplayPort to DVI adaptor rather than HDMI, any suggestions appreciated.
TIA.

Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Start up in Safe Mode. http://support.apple.com/en-us/HT1564
Best.

Garage Band Issues on MacBook Pro

Similar Messages

Maybe you are looking for