Garbage in playing a video in release mode of air application

I have attached a simple air project containing a VideoDisplay Component playing a file from the following location
http://locationserver.irecord.com/TestData/ProblemVideo.mp4
If you run this project in Adobe Flex Builder 3(i am using winxp) video display component plays the above mentioned file with out any garbage in the video. But in the release mode garbage is clearly visible in the playback.
I have played this video in QuickTime, VLC, Media Player Classic and MPlayer. All of these players played the file correctly.
I don't known what is the problem?
Any help will be greatly appreciated.

Seems to be a problem with the profile being used (Baseline level 2.2).
I reencoded it with a High level 5.1 profile and the artifacts are gone:
http://muzakdeezign.com/flashcoders/ProblemVideo.mp4
Of course there's some quality loss now, as I encoded an already encoded video. So try encoding the original source with a higher H264 profile.
I use MediaCoder for all my .mp4 encoding:
http://mediacoder.sourceforge.net/

Similar Messages

Playing music videos in landscape mode on 4s running ios7

playing music videos in landscape mode on 4s running ios7

oneaburns wrote:
Dear Apple, I doubt you'll read this or do anything but I guess it's worth a try. It used to be that when you played a music video via the musof app on your iphone, it would display the video in landscape mode. Now, extermely inituitively, turning your phone to the side shows a selection of your album covers. No one wants that. I seriously can not think of one person. Looking in your own forums you have questions in 2013 asking to bring this back but no response has been given. That's called arrogance. This is not some big technical ask. It would take you little to no time so what gives? You say you care about the customer experience but between this and the iTunes library syncing issues I am beginning to question that.
You're correct as there is no Apple here in this user to user technical forum.

When I play a video in mirroring mode,I can see only the video in the tv thru apple tv ,not in my ipad 2 how can i fix it? to see in both parts.

when I play a video in mirroring mode,I can see only the video in the tv thru apple tv ,not in my ipad 2 how can i fix it? to see in both parts.

Have you tried resetting the iPad:
Reset iPad: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

Playing all videos in shuffle mode

Can I make a playlist of all music videos that I can play in shuffle mode. I want the next video to play after the 1st one is done without having to go back to the video page and select another video. I could do that on my Generation 5?

The only way to do this is with a 'smart playlist', and currently there is a bug in the software version 1.1, and 1.1.1 which corrupts or doesn't sync smart playlists properly.

ITunes keeps playing music videos in fullscreen mode.

Hi, I'm having this issue with itunes 10.4
Everytime a music video plays on itunes it goes fullscreen!
Even if i'm using safari for instance, my space it's changed to the fullscreened video and it doesnt even show up, its just a black screen with the music in the background
And after the music video finishes, the next song starts in the Visualizer mode,
it won't go back to the normal window it's annoying
How can i change this?
I tried to find an option in preferences but couldnt find it

Try to set your preferred video size in the iTunes View menu > Video Playback > [Options].
This used to be in preferences. but now is in the View menju.

What is the use of Digital Signature in export release build for AIR applications

hi Freinds..
what is the use of digital signature identity when we release build?

Well obviously it is an Ant build.
It looks to just compile/build a web application into a war so you can deploy it where you want to.
You don't need to edit it every time you are making a new page. It should work for any generic struts web application laid out in the fashion it expects.
Cheers,
evnafets

Play flv byte array in Air Application

I'm trying to load and play an FLV from a ByteArray in Air application . I have created small dummy application in which l am readiong flv from file system .After reading flv file i have byte array so can you please help me out in thi how to p-lay flv from byte array.
I have searched the web for awnsers and didn't find anything .
Any help, ideas or something?

Hi Giuseppe,
what I do is:
1. create a file using Captivate
2. i place a .flv video in this file
3. save the file as .swf
4. then i go to dreamweaver and put the swf on a html page.
Now:
when viewed in a browser, everything runs fine.
when i pack this page into an air application (in dreamweaver) the video does not appear,
instead I get this "Connection Error"
I do not know a console or log file.
However, I learned that there is a .xml file located in the same AIR folder that you publish in.
In this .xml file there is a setting :transparency. in order to playt a .flv file this must not be be "transparent"!
(i read this somewhere in the net)
hope that helps
I will talk to a professional programmer, if I have any news, i will let you know
Claus

Unable to send file in binary mode to ftp server using AIR application

Hi, Can any one help me. i am trying to send local files to ftp server in binary mode from AIR application using sockets.
I cant use PASV mode for this FTP server because security restrictions. when i am trying to send Binary command i am always getting
error code 500 which is unrecognized command. I googled for solutions but i cant find any one using Binary mode to send data every example is using PASV mode to send
file.
code example:
private function upload():void{
sendCommand("binary ");
private function sendCommand(arg:String):void {
                                        arg +="\n";
                                        s.writeUTFBytes(arg);
                                        s.flush();
in response i am getting unrecognized command.

I'm successfully using an ftp example from http://http://projects.maliboo.pl/FlexFTP/
that I converted to spark and uses a popup progress window.
If you don't need to use sockets I can post a sample project.
I believe I still connect with PASV, but have no problems sending Binary files.
I don't think they're commands that are dependent on each other

How do I play a video in full-screen mode on one screen of a dual-screen Windows 7 system without blanking out the other screen?

How do I play a video in full-screen mode on one screen of a dual-screen Windows 7 system without blanking out the other screen? Not losing the other screen would be useful as I would like to, for example, monitor my emails whilst watching a video or to work on a project whilst watching an instructional video.
Note : Resizing a window to fill the screen is not acceptable as it still leaves unsightly borders.

bump

Why will iphone not play video in landscape mode anymore

I am a HUGE purchaser and user of iTunes Music Videos and on my iPhone, I was happily playing them in playlists and watching them in landscape orientation as a video playlist.
I was quite upset when I bought my first iPad and found that it simply would not support this basic (for me) functionality.   But I searched and found a music video playlist app and purchased what SHOULD HAVE BEEN included functionality on the iPad.   Seriously, if the iPhone could do this basic operation why shouldn't the iPad, which is much better suited for video playlists with the bigger screen?
Now, after updating to iOS7, you've broken the functionality even moreso.   Imagine my joy, surprise and sheer level of cursing and swearing when I turned my videos into landscape mode and found some dickbag has decided I should see album covers instead of my video in full screen on the phone.
So, Apple, the "We sell devices so that we can also sell the media" company,   why are you screwing with something that should be basic and intuitive on the phone and ipad?
I, and I expect everyone else, expect to open the music app, go to the music videos playlist automatically generated in that app (BY your programmers) and then be able to play the videos from the video playlists you allow me to create - my own playlists in both portrait and landscape modes.
So please fix this ever-increasing pain in the ***.    I will not be purchasing any more videos (And yes, check my history, I am quite likely in the top 5% of purchasers of music videos) because you are slowly removing the intuitive methods for playing them.
David Patrie

A revolutionary A7 processor with 64-bit architecture, and none of those bits are smart enough to figure out "hey, maybe if my owner is listening to a video in the Music app and switches to landscape mode they're more interested in seeing the video larger, not unrelated album art thumbnails. Let me temporarily borrow the landscape view logic from the Video app."?
I hope they fix this at least by iOS 8. It's not logical (let alone user friendly) to exit out of the Music app and go into a separate Video app just to see a music video in landscape. The ironic thing is the Video app forces videos to be landscape – as if the logic it follows is that anyone watching a video really wants to see it in landscape – but yet that logic gets kicked off the boat when the video digits cross the river over to Music app land.

When I take a photo or video in landscape mode, it will not play back or show in landscape with the phone held horizontally.

When I take a photo or video in landscape mode, it will not play back or show in landscape with the phone held horizontally. i have an iPhone 5. I think this happened sometime after the last upgrade but I am not sure when. is there a setting on the phone that may have gotten changed somehow?

Slide your finger up from the bottom of the screen to reveal the Controls panel. One button controls orientation lock to prevent the screen rotating as you rotate the phone. You can toggle that control on and off as you need. Slide the panel back down when you are finished with it.

Safari in 64-bit mode on Snow Leopard does not play YouTube videos

Recently Safari stopped playing youtube videos while Safari is in 64-bit mode. The entire page renders correctly; however the area where the video is supposed to play remains a black box without controls. I can watch video from other sites, or I can watch video from youtube if I use another browser like firefox. Additionally, I can go to the youtube video owner's channel and view videos there just fine. It's only when I try to view videos that use the "http://www.youtube.com/watch?v=" method of displaying a video using Safari in 64-bit mode that it fails to play -- it plays fine with Safari in 32-bit mode.
Flash Version: 10,2,152,26
Message was edited by: Annorax64

scotso22 wrote:
@Annorax64: are you sure the problem is limited to the latest Flash Player? I'm pretty sure I was still running 10.1 when I first saw it, after getting an error "Safari Flash Player (Safari Internet plug-in) quit unexpectedly."
Upgrading to 10.2 didn't help.
It's not !. Flash player 10.1 is no better (as you can verify by downgrading here http://kb2.adobe.com/cps/142/tn_14266.html)

Can't play music on ipod and youtube videos on speaker mode after update

Hi people!
I just updated to version 3.12 yesterday and after which, i tried playing songs with ipod mode and the speaker was not working. Tried plugging on a earphone and was able to listen to the music. The same issue was encountered on playing YouTube videos on the phone via speaker mode. The speakers however works when someone calls and while communicating via speaker mode on a phone call.
I tried to do a system restore but was unable to revert back to the previous version 3.11 on my backup file. The same issues were encounter after doing a restore and notice that the phone boots up from a hard reset significantly longer and some ringtone files which shows already sync into the phone on itunes was not found on the iphone itself.
However just when i was about to give up, i tried one last time to reboot the phone again to troubleshoot if the speakers was the one causing the problem, I tried setting "Lock sounds" and "Keyboard Clicks" off and on again and was able to get the speakers working now for ipod and youtube. Thanks goodness the speakers wasn't spoiled.
But when i sync some of my music files back from my computer again and every time i hook up to charge my phone, the problems keep coming back...
Is there anyone encountering this problem too and any permanent solutions or should i just visit the service center for a peace of mind as i do have 6 months of warranty left...
Thank you all for your time. Regards...

Try the standared fixes:
- Reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults.

Cannot play any video (even youtube vids) on my HP TouchSmart 520 with Windows 8 in Metro Mode.

HP TouchSmart 520 PC
Windows 8
Just upgraded from Windows 7 to Windows 8.
Upgrade was uneventful.. went very smoothly.
Problem is now I cannot play any videos in the new Metro Mode (I tried using various apps... Video, youtube player, etc).. not even youtube videos.
However, when I select Desktop mode.. everything still works fine.
Any idea what is wrong ?

Hello WongKO:
Welcome to HP's forum. I do not know much about Windows 8. Reading this fact sheet it says that you need to purchase the media software and upgrade to Windows 8 pro. This fact sheet should guide you. http://www.windowsupgradeoffer.com/en-US/Home/Faq? Windows 8 system requirements section.Will DVD playback work after upgrading to Windows 8? This one is in general section. Will installation media be available for purchase? Back to Windows 8 requirements. Is Windows Media Center included in the upgrade to Windows 8 Pro? Least you are able to watch videos in other mode until you figure out what is best. Good luck frrw. Ounce you have figured out the software purchases you should post it to help others out. My computer is to old for upgrade. No drivers were made for it.

AVC HD from Panasonic Lumix movie mode does not play on the iPad. Motion JPEG mode does play the videos, however there is no sound. Any suggestions?

AVC HD movie mode from a Panasonic Lumix camera will not play on the iPad, the format in the camera is not compatible. However, Motion JPEG mode in the camera will play the video on the iPad but there is no sound. Any suggestions?

Ok, I was an old fool, there is indeed a setting on the Lumix LX5 camera which seems to allows both audio and video, although not AVC HD, the camera must be set to Motion JPEG and subsequently NOT to PICT Bridge, rather to PC for the output. Anyone who decides to purchase a Panasonic Lumix should be aware of this. The iPad 2 will display Lumix perfectly in 720p which is enough for the old fool. The Sony NEX5N at twice the cost will do 1080p, but on the iPad and our TV the difference I suspect will not be noticeable.

Garbage in playing a video in release mode of air application

Similar Messages

Maybe you are looking for