Gave Skype permission to access a photo in error

what can i do to reverse permission given to skype to access a photo that was delivered to me.

I Tried To Reverse my Permission to not allow access to a photo for my profile, it was Noted to change setting in Privacy. However,Skype is Not Listed there. What Other Privacy is there, To change the settings?

Similar Messages

403 forbidden you don't have permission to access / on this server Error

I just deployed my server 2012 & exchange 2013. Serv#1 domain name is xyz.com. and Serv#2 exchange server: mail.xyz.com. My server is also hosting DHCP Server. After installing the servers, every time when i go to
my website - www.xyz.com (it is hosting by third party Webmaster) it give me error message: 403 forbidden you don't have permission to access / on this server Error. What can I do to result this problem.
Thank you for your help.
Cnet3383

Jim,
Thank you very much for responding on my question. My website is working fine. It only has problem with the segment of network within server 2012. And also, I found out that as soon as I stop the DNS server then i can access my website
without any problem. I am very sure the problem in the setting of my DNS Server. I have all A records are pointing out to internal private ip to Server 2012, Exchange Server, and also external ip to exchange server, and website. Here
is my DNS Mgr setting:
(Same as parent folder) Start of Authority (SOA) (204),serv.xxx.com,hostmaster.xxx.com Static
(Same as parent folder) Name Server Serv.XXX.com
Static (Server 2012 Name)
(Same as parent folder)
Host (A)
173.xxx.xxx.19 Static (Public IP)
(Same as parent folder) Host(A)
10.1.8.1 Static (Private IP)
(Same as parent folder) Host(A)
98.xxx.xxx.83 Static (My website public IP)
(Same as parent folder)MailExchange (MX)
Mail.XXX.com
Static
serv
Host(A)
10.1.8.1
Static
Mail Host(A)
10.1.8.10 Static
Please, let me know if you can figure out what is the problem.
Thank
Cnet3383

Cannot play shared videos - get "you don't have permission to access the requested resource" error

When I try to access my shared videos from my iphone 5 (OS 7.01), I get the "You do not have permission to access the requested resource". The videos I'm trying to play are mine....ripped, not ones purchased from apple.

I had this problem too.
I am running iTunes on an old PowerPC MacMini using iTunes 10.6.3. I was trying to stream video on my iPad mini and kept getting the error: "You do not have permission to access the requested resource".
So, I turned on iTunes on my laptop which is using Mavericks and the latest version of iTunes. It worked fine off it. It's just sometimes I like to keep my laptop in its bag and run things off my iPad through my MacMini.
So, I did follow the reset network settings on my iPad. It fixed it temporarily. In the middle of an episode of BBT the error message came up again.
I tried starting iTunes again. I reboot the machine. Still got the error.
So, I ran Onyx on the MacMini. There were a lot of permission errors on the hard drive. Once I fixed those, it seems I now have permission to access that resource.
If you have a disk utility, try running it on your source computer to fix any disk permissions or errors that may be causing the error.
In my case, it was the disk permissions needed repair.

When an app hast permission to access photos, can it transfer them to somewhere on the internet without user knowledge?

Hello
when I give an app the permission to access my photos, how is it secured that it doesn't transfer parts of them to somewhere on the Internet in the background without my knowledge?
Thanks for an answer!
Florian

Sorry, but you cannot simply copy your Time Machine backup by drag and drop. You must clone it from the old drive to the new one:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the new Time Machine backup drive. Source means the old Time Machine drive.

I accidentally declined for an app to access my photos and now won't save.

I wasn't sure where to post this - first time support user so very confused!
I have recently downloaded a very helpful app for my iPhone which, like many other apps, ask for permission to access your photos etc. I accidentally declined the permission to access my camera roll and it is an app that I can make coloured notes in and save them to my camera roll. Now I cannot save the images produced in the app to my camera roll - it tells me it has saved but it hasn't - I suspect due to the permissions being unauthorised. How would I go about reauthorising this app to allow it to use my photos? I have deleted and reinstalled, hard reboot on my iPhone then reinstalled - everything.
Any advice would be greatly appreciated!

Settings > Privacy > Photos > toggle that app on

FlickIt: unable to access GeoTag photos to post on Flickr?

Please fix the iPhone SDK so that 3rd party apps like FlickIt can send the geotagged photos to Flickr. Why strip the GPS data off if it's already there? Sounds like a bug to me? Now I've just wasted my time with my vacation photos. I thought I had so carefully geotagged and uploaded from the road. See diagnosis of the bug & workaround below. I'm really impressed with the high quality of support and quick response I got from a free app on a Sunday!
I just want to see my photos on a map. Is a mashup that hard to do? Maybe iPhone Maps / Google Earth apps should learn this trick then I would only need Flickr maps website to share with others?
Unfortunately, missing GPS data is due to a limitation in the iPhone OS itself. By the time my app gets the photo, the OS has stripped off all EXIF metadata. This is a problem for all 3rd-party developers using the camera or library choosers from Apple.
If you transfer your images using iPhoto or sync them using iTunes, then they should retain their original GPS metadata.
Green Volcano Software, LLC

You must give Viber permission to access your Photos.

Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on get info . What am I suppose to change in the setting on getinf

Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Apache user dir (13)Permission denied: access to /~simha/ denied

I am getting Access forbidden! when I am trying to connect to http://localhost/~simha/ where simha is my user name
my /var/log/httpd/error_log says
[Thu Jul 08 17:44:30 2010] [error] [client 127.0.0.1] (13)Permission denied: access to /~simha/ denied
I tried a lot and gave up. Can any one help me in this in regard
The following are the permisions of my home dir simha and public_html
drwx--x--x 130 simha users 16384 Jul 8 17:04 simha
drwxr-xr-x 2 simha users 4096 Jul 8 17:02 public_html
The following are my httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks includes
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# phpMyAdmin configuration
Include conf/extra/httpd-phpmyadmin.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
Include conf/extra/php5_module.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
The following are my /etc/httpd/conf/extra/httpd-userdir.conf
# Settings for user home directories
# Required module: mod_userdir
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Note that you must also set
# the default access control for these directories, as in the example below.
UserDir public_html
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
<Directory /home/*/public_html>
AllowOverride FileInfo AuthConfig Limit Indexes
Options MultiViews Indexes SymLinksIfOwnerMatch ExecCGI
<Limit GET POST OPTIONS PROPFIND>
Order allow,deny
Allow from all
</Limit>
<LimitExcept GET POST OPTIONS PROPFIND>
Order deny,allow
Deny from all
</LimitExcept>
</Directory>
I also tried adding user to the group http. BUt nothing is working.

Do you have [or more like lack] +x on the user folder?

Hi after my elements 11 downloading to my mac for the last 1hr 30mins it got to the last 30secs and says i don't have permission to access it please help

I've recently bought a mac please help.. after mislaying the mac disc which was included in elements 11 ( on my main tower i installed the windows disc in the box with no problem) i spoke with adobe who gave me a link to download for my mac the use the same serial number... the problem is it downloaded until the last 30 secs then error came up i don't have permission to access the request.
please help

Accessing/copying photos in iPhoto

I am so frustrated!!!! I am trying to copy and paste photos that I have uploaded from my iPhone 4S (7.1.2) to my Macbook Pro (10.9.4) using iPhoto (8.1.2). My iPhoto app came with my Mac. I just tried to upgrade to the latest in the Apple Store but for some reason it would not offer me that option despite all efforts and coming at it from various directions. I got to where it looks like I should be able to and then no options available - so I don't know if this is a version issue or not. But I don't think it is.
I am trying to send photos as attachments to Gmail emails. I can send emails with photos still on my phone but I don't want to type everything on my phone. I can send individual photos using share and the Mac "Mail" but I don't use that for anything and don't want to. I just want to be able to find, copy, and attach photos I have imported from my phone to my Mac. They are not visible using Finder, at least with the "IMG_0xxx" photo id that is in iPhoto. I have tried to go into various folders and the iPhoto library but no joy. I just can't seem to find them.
Must be something simple if I have just missed it, or, based on my recent last two years of love/hate/despise relationship with all things Apple, it may not in fact be possible. I try to just up to date on software versions but each one seems to break more things than it fixes.
Any advice help is appreciated.

Terence - thanks for your kind words about how I don't get it. I am not trying, nor do I want to be forced, to use iPhoto to send my photos via an application OR service I prefer not to use. If that is the only way to do so, then it is my decision to accept that or not, and indeed, stop using it. But I paid for it and I prefer that it play nice with the rest of the world. I understand why it is easier to develop a set of compimentary software (whether it is a service running an application on a server or as an application running on my Mac) in a closed system way. Your terminoloty of "service" and "application" are not universally accepted and not widely used by all the users out there. I have bona fides as system designer and developer but I won't assume that would make any difference to smug people out there and was there when the client/server model was initially developed and since turned into to server-based iCloud-type database services. BTW I don't like having my sensitive personal info on a machine I can't lock up for myself but I am just paranoid and naive. But I am fine being able to copy and access my photos with other applications that run on my personal Mac, and also to use the "service" that Gmail provides running their application via a client/server model. I don't like Apple changing the rules to force me to use iCloud as a service to replace my Contacts application running on my iPhone and Mac. Sure it is handy to have iCloud do that but I would prefer to have the option to keep local control of my contacts and calendar and there was no reason for Apple to force me to use iCloud except for other business reasons that benefit them more than it does me.
I did thank you for providing me the info to allow me to do exactly what I wanted to do. I don't find iPhoto to be either intuitive nor well documented which is why there are people like you out there that have fun helping ignorant people like me to ask questions for answers that should be provided by iPhoto documentation. I did spend over an hour trying to find the answers you gave me and only came here as a last resort. Believe me, it is not fun to have to do that with everything Apple (and Microsoft, et al). One of my hats in previous jobs was to manage the documentation process for far more arcane software than this. The standard was that a user should be able to understand how the software works without jumping through hoops like going to a support group to be put down by those who have the time to sort all this out full time (or during the other time that other people use to have a life).
I am used to using Gmail, and Outlook before that, and Yahoo before that..... I am not a power user. I don't want or care to. I use iPhoto because it is what came with my Mac and what works with my iPhone. It is a very closed architecture and this is not the only frustration I have had with this model, especially with the lack of complete support for the products. I won't bore you with the wide and numerous problems people smarter than me have had with Apple products. And in any case, swearing at software is a long and distinguished process. I am not the first and not the last. At least I was only thanking you for your help rather than swearing at you. I don't appreciate your condescending attitude for poor schmucks like me though.
Old Toad, regarding your advice, I actually have done and abandoned using Mail to go through my Gmail account. I don't really care for two layers of software trying to do something simple like this. And why should I? Mail may be an application rather than a service but from a user interface point of view they look and feel the same and you have to follow their rules of the application or service design. Gmail is not a perfect service but at least I know how to use it for my email. I don't really want to have to use Mail in additon, especially when I can access the Gmail service on any platform I happened to have to use at the moment. Mail is limited to my Mac since it is a Mac only application (I'm sure you will correct me if I am wrong on that). To each his/her own though. I do appreciate that you guys did help me and that I have the options to use the systems (whether as a service and/or application) in a way that best suits my skills and preference. I won't knock how you prefer to do your mail and photos. It is just not what I want to do if given the option. BTW - I have several reasons to wean myself away from the "service" that Google provides but that is not an Apple application issue.

I copied a lot of photos from an iphone to a DVD using a Windows 7 laptop, now I cannot access those photos on the DVD. HELP!

I copied a lot of photos from an iphone to a DVD using a Windows 7 laptop, now I cannot access those photos on the DVD. HELP! In Windows Exlporer I can see the data on the disk in the details but when I click on it nothing appears as if there is nothing on it.

It should. So they aren't shown in the Last Import smart album, right? Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
OT

I can't access my photos in camera roll.

I can't access my photos in camera roll. It just shows blank boxes instead of the images. When I click 'edit', I can see the image but it won't save, email, sms or anything. If I click on a video, it kicks me out back to home screen. Any ideas what to do?

I am having the same thing as well. I click the photos app, I try view the photos I have taken, it just closed out of the photos app and goes straight back to the home screen. There is another way to see the photos you have taken. You click on the camera, then you click on the photos on the bottom left corner, it works for me. I can see all the pictures I have taken.
I've been having problems with my camera, whenever I take a picture (with/without flash) my photos turn out black, was wondering if anyone can help us out about this problem.

Can't access any photos, Camera Roll sends me to home screen?

Yesterday I took over 100 photos on my phone for work. After returning to the office and attempting to sync them to the cloud the process froze and never completed.
Afterward I am unable to view any of the photos in the Camera Roll. Each time I click on Camera Roll it sends me back to the home screen. If I take another picture it sends me back to the homescreen after the photo is taken. Plugging the phone into the computer does not allow me to access the photos either, it doesnt show them as being available and I cannot transfer them to my computer in any way.
Any suggestions?

After posting my question I found a topic with the exact same problem, unfortunately the solution was to restore the phone...this is not the solution I was hoping for as I cannot lose all the photos I've taken. Any other suggestions would be greatly appreciated. For reference I've included the other link below.
https://discussions.apple.com/message/16481121#16481121

My iPhone 4 has been saying You do not have permission to access the requested resource whenever I try to watch one of the episodes I bought from iTunes. It will not let me watch them and I don't know why.

A few days ago I bought a season of the series Psych off of iTunes. I was able to watch the first bunch without a problem but now all of a sudden when I try to watch one it says "You do not have permission to access the requested resource". I tried restarting my phone but that do not help. I cleared up a lot of space on my phone as well. I have and iPhone 4 with the update of iOS 6.1.3.

Are you using the same Apple ID that the purchase was linked to? I had this issue with a shared device, and the other person had logged out of my ID and logged in with hers.
If it's the same ID, then try redownloading the purchase.

When a Safari download is interrupted, I get the message "You do not have permission to access the requested resource" when I try to restart it.

I have had this issue with my Macbook Pro ever since I bought it in November. If I start downloading a file with Safari, and the download gets interrupted, I am unable to resume downloading from the point where it was interrupted. Clicking on "resume downloading" button in the downloads list works fine it I do it immediately after the download is interrupted, but if a little time has elapsed (as little as a few minutes) since the interruption it will not let me resume the download, and I get the message in the downloads list "You do not have permission to access the requested resource." I have repaired my permissions...I don't know what else to do. Here's my system configuration:
Macbook Pro Mid-2012 Retina Display
2.3 GHz Intel Core i7
8 GB RAM
System 10.8.2
I just have to editorialize for a moment: My old Macbook Pro and my Mac Pro both worked great with Snow Leopard, but since upgrading the Mac Pro to Mountain Lion and buying the new Macbook I have had all kinds of issues like this. Tech support at Panic software, that I contacted because of issues with some of their software, told me that I was only one of many with Mountain Lion issues, but here we're over half a year since the release of 10.8 and we're only on system 10.8.2. Is anybody at Apple actually trying to fix the issues?
Thanks for anything you can tell me!

If you think this is a bug, you can report it here:
Apple - Mac OS X - Feedback

Gave Skype permission to access a photo in error

Similar Messages

Maybe you are looking for