GC Logs do not log to the specified file

Hi,
I am facing a wierd problem while logging GC Logs to a log file.
The Command line I use is this -
-Xloggc:D:\gc_logs\gc_logs-%date:~4,2%%date:~7,2%%date:~10,4%-%time:~0,2%-%time:~3,2%-%time:~6,2%.log -XX:+PrintGCDetails -XX:+PrintGCDateStamps -verbose:gcWhenever my server stops, upon restart, I see that the gc logs go directly to console but fail to log into the log file expected.
I have verified the D:\gc_logs folder exists.
I am not sure if there is anything I am missing here that is causing this problem.
I use JDK 1.6.0_10 and JBoss 4.2.3.GA Server.

Check the permissions of folder. Hope it's not read only folder. I have faced same problem on linux box.

Similar Messages

Shared Services database content not found in the specified database."

Trying to configure Version 11 and get the error: "Shared Services database content not found in the specified database". Relevant details on my issue as below:
- I'm running Windows 7 and SQL Server 2008 on my local machine.
- I did have a previous installation of Hyperion 9 on my machine which I uninstalled before installing 11. However, after uninstalling, I could still see the Hyperion EPM (empty folders) in my "All Programs", which I manually deleted.
- Now I've installed Essbase 11, and for now am trying to configure Hyperion Foundation only (Common Settings and Configure Database is greyed out, I checked deploy to applicaiton server. I left the calculation manager and workspace blank).
- The next window is the "Configure Shared Services and Database Registry" option. I chose "Perform 1st time Configuration of Shared Services Database". When I enter the relevant details, I got the error mentioned above. My error log file entries are as below:
(Jul 14, 2010, 02:10:50 PM), com.hyperion.hit.registry.Registry, ERROR, Exception when trying to store the component
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
     at java.util.ArrayList.RangeCheck(ArrayList.java:546)
     at java.util.ArrayList.get(ArrayList.java:321)
     at com.hyperion.hit.registry.JDBCRegistryUtils.storeComponent(JDBCRegistryUtils.java:612)
     at com.hyperion.hit.registry.JDBCRegistryUtils.saveComponent(JDBCRegistryUtils.java:166)
     at com.hyperion.hit.registry.Registry.storeComponent(Registry.java:2749)
     at com.hyperion.hit.registry.Registry.getInstance(Registry.java:353)
     at com.hyperion.config.wizard.impl.RegistryWizardRule.validate(RegistryWizardRule.java:66)
     at com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel.queryEnter(WizardFormAdapterPanel.java:80)
     at com.installshield.wizard.awt.AWTWizardUI.currentBeanChanged(Unknown Source)
     at com.installshield.wizard.swing.SwingWizardUI.currentBeanChanged(SwingWizardUI.java:842)
     at com.installshield.wizard.StandardWizardListener.currentBeanChanged(Unknown Source)
     at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1822)
(Jul 14, 2010, 02:11:08 PM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, Shared Services database content not found in the specified database.
(Jul 14, 2010, 02:11:58 PM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, Shared Services database content not found in the specified database.
I believe version 11 supports Windows 7, but correct me if I'm wrong. What's going on here? Any suggestions on what I should try ?

Actually when I installed version 9, I never got around to configuring shared services and so never had a shared services database in SQL Server to begin with.
One question about the registry entry you told me to delete: The (HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions) which currently exists would be the entry for version 11 which I have installed right? It's the only entry for Hyperion Solutions in the registry.
After uninstalling versino 9, C:/hyperion still existed on my machine (though it didnt have all the subfolders which it did prior to uninstalling), so I manually deleted it before installing verison 11.
I wouldn't mind installing it on a compatible version of windows, but the thing is that at this point this is all that is available to me.
and I don't have any other oracle products.
thanks....

This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase the timeout value on the Proxy and Timeout page in search administration. You might also wa

HI,
I got the error message in the crawl log as below after performing the Full Crawl
This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase
the timeout value on the Proxy and Timeout page in search administration. You might also want to crawl this repository during off-peak usage times.
To overcome the above error,many forums have suggested me to increase the time out which is under Farm level settings.But if time out gets increased,performance impacts as well.
So please suggest me to overcome this error without increasing the timeout.Thanks in advance
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
I understand that you get the error message when performing a full crawl. I have seen similar cases caused by IE proxy settings. You can try to edit the Internet Options>Connections>LAN settings. Uncheck ‘Automatically detect settings’.
For more information, please refer to this site:
Search error: crawler could not connect to the repository:
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/c230ab36-8d0b-4c25-bf86-33136d17642b/
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

Database does not exist in the specified path

Just bought a USB 6009 DAQ and for some reason I now keep getting this error: "Database does not exist in the specified path" in VI Logger 2.0.1 it was working. Can anyone help??

Jared,
It sounds like VI Logger somehow lost its association with its
database. Please open MAX and check out the "Historical
Data"->"Citadel 5 Universe" entry. Under "My Computer" in the
right-hand pane, you should have a database called "VI Logger Data". It
must be spelled, spaced, and capitalized the exact same way. If you do
not have this database (which I suspect you do not), right click on "My
Computer" and select "Create/Attach Database..." The default database
path (if you want to have access to your old data) is C:\Documents and
Settings\All Users\Application Data\National Instruments\VI Logger,
with the database name as "VI Logger Data". If you want to create a new
database, then specify a new path.
If "VI Logger Data" does appear, a possible fix is to detach and
reattach it. Right click on "VI Logger Data," select
"Detach/Delete...," and chose the "Detach" option. Finally, reattach
the database as described above.
Hope this helps,
Ryan Verret
Product Marketing Engineer
Signal Generators
National Instruments

The specified screen does not exist in the DLIB file

Dear Experts,
I have copied the program of VA01 to Zprogram and created ztransaction when I execute ztransaction it will goto first screen, after I type input and click enter I will get below message
Screen zsapmv45a 4470 does not exist
when I check help (F1) it says as follows
Diagnosis
     The specified screen does not exist in the DLIB file.
Procedure
     Specify the programm and the screen number correctly.
     If you want to generate a list of existing screens, select the program
     and screen number on the Screen Painter selection screen. In the case of
     the screen number, you can only enter a * in the first position.
can anyone tell me that how to maintian screen in DLIB file?
Thanks in Advance...
Venkatesh

Do you have such a screen number under the function group where you have copied the transaction VA01?
If not chek in standard func group for this screen and copy it.

Posting is not possible for the specified company code.

Hi SRM Gurus,
We have a four company codes in our org.structure and if we try to post manual invoice for a particular company code with its currency, we are getting this error :
"Posting is not possible for the specified company code "
We have all company codes defined and inherited for the particular user in BUK and we get all the company codes in the F4 help of this user in BBPIV02 -->Basic data.
Any suggestions pl.
I doubt this particular Cocode is deactivated for invoice posting in backend. Is it possible ?
Kindly suggest.
Reg.,
Sridhar.

Hi
Which SRM version are you using ?
Are you getting this error for a praticular company code only or for all the comapny codes ?
Please read this ->
Since you are trying to create Invoice with PO did you check the Vendor Root there is a attribute for company code. Please maintain the same, if not maintained.
Refer the link below for details.
Re: Company code for system missing in user attributes
Other related links ->
Try to change the chart of acct info in OBY6 for a company code that was copied from SAP template, there is no Financial posting or any other posting in this company code.
Re: Posting Period Error in Confirmation
Hope this will help.
Regards
- Atul

Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.

Hi,
We have a cluster with 2 nodes. Everything works fine in Node1. When I try to failover TEST1 database to Node-2 it fails with this message.
Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.
Any help is much appreciated.
Thanks

Hello,
The error message is pretty straight forward, it's saying either the service isn't installed or it's not installed as the same service on that node. Did you install analysis services on the second node (from the error it seems like it isn't)?
Sean Gallardy | Blog |
Twitter

Opca could not connect to the specified database

I have both Oracle 9.2 database and Oracle 9iAS R2 Standard Edition installed in my same home pc. The origin database name is FIRST and the listener port is 1526.
My pc's host name is mypc.chen.com and the IP address in my local LAN is 192.168.0.1. I have no DNS server.
In "hosts" file I added a line: 192.168.0.1 mypc.chen.com
While running opca to install Portal, I entered password of SYS login of database FIRST and connection string "mypc.chen.com:1526:first". I got error message saying "could not connect to the specified database".
In Net8 Assistant local Profile, the naming method was HOSTNAME. But I got the same error message when I change it to TNSNAMES.
Please if anyone can help.
Thanks a lot.

This is a security feature introduced in 11.5.10, and it will not allow any client to connect to the database unless in it registered on the system through OAM.
Note: 295915.1 - ADI Signon Issues in Release 11.5.10+
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=295915.1
Note: 291897.1 - 11.5.10 New Features : Managed SQL*Net Access from Hosts
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=291897.1

Shared Services database content not found in the specified database - EPM

I installed three VM machines (Workstation) for the following on Windows 2003 OS:
VM1 : Oragle DB 11g, Shared Services. Workspace
VM2 : Financial Management, EPMA, Calc Manager
VM3 : Microsoft Active Directory
I have configured Database and Shared services successfully and all machines talk to one another.
Also, I created the appropriate table spaces for the Hyperion products with the right access on the database. And, I am able to connect from the client (VM 2 to the Database VM 1)using SQLplus.
When I tried to configure Financial Management, using the EPM System Configurator and put in the following values:
Database Type: Oracle
Server: VMDatabase (Name of VM1)
Port: 1521
SID ORCL
Username: HFM
password: *********
It returned the error message: "*Shared Services database content not found in the specified database*"
Can someone please help on what I need to check, Please!?
Thanks for your time.
K

Hi,
Information from Oracle Support:
Shared Services database content not found in specified database
Cause
There is a flag in the shared services repository that indicates the shared services database is to be used as a registry. If that flag is not set, the configtool will not re-configure the database as a shared services repository.
Solution
Note: Make sure the Shared Services repository is backed up before doing any Shared Services Registry changes.
The registry flag isRegistryDB must exist and be set to true on the Shared Services Database Connection.
epmsys_registry.bat VIEW DATABASE_CONN
Find the shared services database registry entry. The entry in bold will be missing. The italicized item is the 'unique_id' referenced later (different in each installation).
COMPONENT - 3
NAME - Database:ORCL:HSS
ID - +11d1def534ea1be07ad8eb3012d2e3d310a7ff4+
TYPE - DATABASE_CONN
HOST - Database
HYPERION HOME - /home/hypadmin/Oracle/Middleware/EPMSystem11R1
PROPERTIES -
isRegistryDB = true
dbUserName = HSS
dbJDBCDriverProperty = oracle.jdbc.OracleDriver
dbJdbcUrl = jdbc:oracle:thin:@Database:1521:ORCL
registryDatasource = EPMSystemRegistry
registryDatasourceJNDI = jdbc/EPMSystemRegistry
dbName = ORCL
version = 9.5.0.0
dbPort = 1521
instance_home = /home/hypadmin/Oracle/Middleware/user_projects/epmsystem1
dbPassword = GABaMyyplja+wLNCmLs8ag==
Run the following update to populate the isRegistryDB flag with the unique_id being the ID field used in the DATABASE_CONN registry entry.
epmsys_registry.bat addproperty #unique_id/@isRegistryDB true
Repeat the epmsys_registry VIEW DATABASE_CONN to make sure the flag is now set.
You will be able to reconfigure the shared services repository.
You can mark it as Answer/Helpful if you feel so.
Cheers!
J

Shared services database not found in the specified database

Hi Guys,
In Hyperion EPM System confirurator,i gave all the fields and click next button it show error message "Shared services database not found in the specified database"

Hi ,
1. Pls confirm me one thing. Did you re -install version 11.
2. Re intstallation of version 11 has lot of issues ( atleast 11.1.1.1).
Sandeep Reddy Enti
HCC
http://hyperionconsutlancy.com/

CWSerial/CWGPIB on Win7 :"The subject is not trusted for the specified action"

Hello,
I'm currently trying to migrate a VBA software from WinXP + Excel2000 to Win7 + Excel2010 and I'm encountering a big problem. The software is using activeX control such as CWSerial and CWGPIB but when I'm trying to add them I get the following error "The subject is not trusted for the specified action".
I'm more or less certain it's a permission problem, I just can't figure out how to solve it. I'm also pretty sure it's not a VBA version problem because I tried to do the same manipulation on a Win7 + Excel2000 machine and got the same error, so it must be related to the OS.
What I have already tried:
Regsvr32 on cwinstr.ocx.
Downgrading the Microsoft Office version to 2000 again.
Set Excel's Trust Center to enable all controls without restriction.
Fiddle with the registry keys following instructions on internet for similar problems.
Re-install everything on a new machine.
Did anybody face the same problem and/or has a solution? I'm working on a Virtual Machine so I can test every idea without fearing data loss.
Thank you for your help!

The only way to know what is going on is to retrieve the certificate and check who is the issuer. 
It is always possible that the server doesn't send the full certificate chain (intermediate certificates), so it might help to post a link to this website
Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
Check out why the site is untrusted and click "Technical Details to expand this section. If the certificate is not trusted because no issuer chain was provided (sec_error_unknown_issuer) then see if you can install this intermediate certificate from another source.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the issuer of the certificate.
You can see more Details like intermediate certificates that are used in the Details pane.
If "I Understand the Risks" is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
*Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.
*Note that it is not recommended to add a permanent exception in cases like this, so only use it to inspect the certificate.

10GR2: API5022:can not connect to the specified repository.

Hi
Today I have started getting the following message when try to connect to the Design Center in 10GR2:
'API5022:can not connect to the specified repository. Verify connection information'
Nothing has changed in the repository for several days, though we were able to login to the Design Center yesterday without any issue. This is happening for all users, so is not a client problem.
Also, we can login to the repository via repository browser, administrator and various query tools. Therefore, the connection details are ok.
Has anyone else encountered this in 10.2? If so, any suggestions would be very much appreciated...
Thanks
GB

The problem might be caused by changing the LOCALE setting to a value that is not recognized.
The selection in the preferences does not allow to reset to an empty value, nor does OWB allow to cancel the selection.
This setting is stored locally outside any database at the following location:
C:\oracle\OWB102\owb\bin\admin\Preference.properties.
where the first part is the OWB homedir
After I changed the content into the following, I was able to start OWB and connect to the repository again without any errors:
#Locally Cached Preferences - DO NOT MODIFY
#Wed Apr 25 21:14:29 CEST 2007
LOCALE=en_US
Even though it says not to modify, remember that the only alternative would be re-installing OWB.
Hope this works for anyone having this problem.
Regards,
Patrick.

"A valid repository does not exist at the specified connection" when connecting

Hi all,
I'm using ODI 11g and Oracle Database 11g EE.
I've installed ODI without any errors, and chose to skip repository configuration during installation.
I created the Master and Work Repositories with the RCU that was provided in the same media pack as the ODI installation files.
After starting ODI, clicking "Connect To Repository..." and inputting the correct credentials I get the following error:
A valid repository does not exist at the specified connection...
http://pastie.org/pastes/8081847/text?key=grna09suyra4w0vgitbxiw
Has anyone had this error before, can anyone help?
Thanks!
Josh.

Josh,
Looks like the RCU did not create the repository in the intended schema for some reason. you can check the schema for the ODI tables (SNP_*) presence.

The embedded controller (EC) did not respond within the specified timeout period - Flex 15D

Hello,
I have an IdeaPad Flex 15D, and I have had several problems (mostly processor-related) in the time I have been using it. I contacted Customer Support twice, and finally did a system reset a few days ago after being told by Lenovo Support that my choices for fixing the problem were 1) Reset, or 2) Pay for a premium service to diagnose the problem. Needless to say (again), I went with option 1. So far I have not had any noticible problems with the processors, but there is a certain error showing up in the Event Viewer that I am concerned about. Lenovo Support has been next-to-useless troubleshooting my problems thus far, so I'm taking them here. The error is as follows:
(Event ID 13)
The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.
Sounds like the BIOS needs an update, right? Well, I went straight to the Flex 15D drivers page, and guess what? I quote the drivers page: Bios update is not required for this product. Not required? So, Lenovo ships a broken BIOS and then refuses to support it? I don't know if Lenovo employees ever read this forum, so this might not be the best way to get their attention, but I am so fed up with Customer Support and I want this issue to be known to more than just a few unhelpful 'tech support' people. The Flex 15D isn't one of the more popular laptops out there, so I can't expect anyone reading this to be able to duplicate this problem or really provide any support, but if you have any suggestions whatsover, please reply to this thread. Like I said, I want people to know, and hopefully we can get Lenovo's attention so they can fix this problem.
Best regards,
Owen Dugmore

Hi,
I understand that you get the error message when performing a full crawl. I have seen similar cases caused by IE proxy settings. You can try to edit the Internet Options>Connections>LAN settings. Uncheck ‘Automatically detect settings’.
For more information, please refer to this site:
Search error: crawler could not connect to the repository:
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/c230ab36-8d0b-4c25-bf86-33136d17642b/
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

Java.lang.AssertionError: WSDL not found in the class file "processes

Hi,
I am using WLI 10.3 workshop to build process application. I have designed one JPD which inturn call another process JPD. So i have used worklist process control to create the process and tried to access the process. When i am executing the code, i am getting below error message.
13-Jun-2011 14:13:00 o'clock BST> <Error> <WLI> <BEA-000000> <Exception processing processes.ISPSSQMsgLisnt
Java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.bea.wli.knex.runtime.core.dispatcher.DispUnit.loadDispFile(DispUnit.java:219)
Truncated. see log file for complete stacktrace
Java.lang.AssertionError: WSDL not found in the class file "processes.ISPSSQMsgLisnt", annotated class = processes.ISPSSQMsgLisnt
--ClassAnnotations:
--Method Annotations:
--Field Annotations:
can't continue
at com.bea.wli.knex.runtime.jws.dispatcher.JwsDispClass.<init>(JwsDispClass.java:392)
at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:65)
at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:55)
at com.bea.wli.bpm.runtime.JpdDispFile.createPrimaryDispClass(JpdDispFile.java:382)
at com.bea.wli.knex.runtime.core.dispatcher.DispFile.<init>(DispFile.java:154)
Truncated. see log file for complete stacktrace
xception processing processes.ISPSSQMsgLisnt
ava.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.bea.wli.knex.runtime.core.dispatcher.DispUnit.loadDispFile(DispUnit.java:219)
at com.bea.wli.knex.runtime.core.dispatcher.DispUnit.<init>(DispUnit.java:153)
at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnit(DispCache.java:628)
at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnitForURI(DispCache.java:1029)
at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnitForURI(DispCache.java:950)
at com.bea.wli.broker.JWSSubscriber.getDispClass(JWSSubscriber.java:231)
at com.bea.wli.broker.JWSSubscriber.getRequest(JWSSubscriber.java:184)
at com.bea.wli.broker.JWSSubscriber.doDispatch(JWSSubscriber.java:358)
at com.bea.wli.broker.JWSSubscriber.doDispatch(JWSSubscriber.java:348)
at com.bea.wli.broker.SubscriptionDispatcher.doDispatch(SubscriptionDispatcher.java:87)
at com.bea.wli.broker.MessageBroker$PrivilegedSubscriptionDispatcher.run(MessageBroker.java:179)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.wli.security.authentication.AuthenticationService.runAs(AuthenticationService.java:108)
at com.bea.wli.broker.MsgBrokerSecurityHelper.doDispatch(MsgBrokerSecurityHelper.java:231)
at com.bea.wli.broker.MessageBroker$PrivilegedSubscriptionDispatcher.doDispatch(MessageBroker.java:165)
at com.bea.wli.broker.MessageBroker.publishMessage(MessageBroker.java:984)
at com.bea.wli.mbconnector.jms.JmsConnMDB.publishMBMessage(JmsConnMDB.java:343)
at com.bea.wli.mbconnector.jms.JmsConnMDB.onMessage(JmsConnMDB.java:475)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4547)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4233)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3709)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5058)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
aused by: java.lang.AssertionError: WSDL not found in the class file "processes.ISPSSQMsgLisnt", annotated class = processes.ISPSSQMsgLisnt
--ClassAnnotations:
--Method Annotations:
--Field Annotations:
can't continue
at com.bea.wli.knex.runtime.jws.dispatcher.JwsDispClass.<init>(JwsDispClass.java:392)
at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:65)
at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:55)
at com.bea.wli.bpm.runtime.JpdDispFile.createPrimaryDispClass(JpdDispFile.java:382)
at com.bea.wli.knex.runtime.core.dispatcher.DispFile.<init>(DispFile.java:154)
at com.bea.wli.knex.runtime.jws.dispatcher.JwsDispFile.<init>(JwsDispFile.java:24)
at com.bea.wli.bpm.runtime.JpdDispFile.<init>(JpdDispFile.java:108)
... 34 more

Hi
Are you using wli process control?
That uses wsdl and could cause the issue.
I also saw couple of internal bugs CR264315 and CR288904 on the same issue on 9.2.
Since this is a wli issue could you post in the wli newsgroup to get more answers http://forums.bea.com/forum.jspa?forumID=2047 ?
Also you can open a BEA support case at http://support.bea.com and an wli support engineer would help you. Please refer to the Cr numbers above in your support case.
Thanks
Vimala

Error 127: The specified file or directory name is invalid

Hello,
I am trying, for the first time, to Groom a users home directory. I had created user Home directory policy and have added vault and groom...

On 5/14/2013 7:16 AM, nwadmsitn wrote:
>
> Hi,
>
> I'm trying to evaluate File Reporter. I have installed the agent on a
> OES11 box. This agent is acting as my proxy agent.
>
> Then i setup a policie to scan a volume on 2 differents server. One is
> OES11, the other is OES2.
>
> When i launch my policies i have very differents result :
> - Volume Free Space : After 5 attempts finally it is working
> -File System DATA : I have most of the time this error : (127) - The
> specified file or directory name is invalid. Sometimes Operation is
> successfull but in the reports i have only data for 1 of the 2 volume
> and only for 2 directories
>
> In the log file of the nfr proxy agent i have this kind of error :
> 01 2013-05-14 13:00:29 7200 3 0006 5953 7f674b5e0700
> SRSScanAndCollectFileSystemDataService::FinalizeSc anDataEntry() - Worker
> thread encountered an error and is exiting, Scan ID = "18", Result = 0.
>
> Can someone help me ?
>
> Stephane
>
>
Stephane,
Just to clarify a few things:
1. Do you get these results for both scan targets? Or only a proxied
scan of the OES11 or OES2 volume?
2. What sort of volumes are being scanned? NSS? AFP? NCP? What's the
underlying Linux filesystem type, if applicable?
Thanks for helping us understand your problem better.
- NFMS Support Team

GC Logs do not log to the specified file

Similar Messages

Maybe you are looking for