Change pernr in internal data Infotype

Hi,
I want to change pernr in infotype 32 (internal data). Can anybody tel me how to change it.
Thanks
Sri

Sri
This cannot be Happen Either delete the Pernr thru PU00
and Re Hire the employee
say
2  is my no  which have details of mine and you want to chage it as yours how it happen  we know PERNR is Unique
and  we maintain the data for that PERNR in various infotyeps like IT002    006  Personal data and address
kinldy check

Similar Messages

  • Infotype 0032 - Internal Data extend field length

    Dear All,
    We have a requirement to store employee's office location in SAP infotype through inbound interface from Active Directory. It seems infotype 0032 - Internal data is design to store such information under Work Center fields - Building number (6 char length), Room number (6 char length) & Telephone number but these fields are too small, Can I make these fields long? How? Some of EE's location is very long, so I am looking at around 30 Char so it does not chop-off the office location. Same with Phone number too, should be able to store international numbers with country codes e.g. 61-3- 7890-1234.
    Please guide. Thank you.

    Thank you for your reply.
    Looking into above related threads, I am confused about the ways it could be done. It is obvious SAP has delivered above fields so small and it is necessary for us to make it longer. what is the right way - modify these standard fields (w/ getting access key to change) or create custom fields with same label description - Building number, Room number, Tel. number; which sounds redundant.
    And if suggested creating custom fields to standard infotype then how to achieve thru PM01 or shown in above link - Append structure and ETC. I am a functional analyst not techincal person.

  • I changed my data plan from 6g to 8g while my daughter who attends college outside of the US at Toronto Canada (and we have on a international calling and international data plan) was on spring break at her grandparents house here in the US. I made the ch

    I changed my data plan from 6g to 8g while my daughter who attends college outside of the US at Toronto Canada (and we have on a international calling and international data plan) was on spring break at her grandparents house here in the US. I made the change online since I had been waiting on the phone for over 10 minutes for a customer service rep to come available. Well when I made the change online since that seems to be the thing that Verizon wants it's customers to do and I didn't see all the different plans available and just did the upgrade to 8g. Next bill had over $900 in roaming charges on her phone line. I called the 1-800 number and waiting for a service rep and after 20 minutes of waiting and being put on hold was told it was the customers mistake and there was nothing they could do.Thanks for nothing. I called back after thinking about it and wondered why changing a data plan for the phones in the US would change a international call plan. Waiting over 10 minutes again between waiting for a service rep and hold for one to answer the call. Gave her all the information about it and she said she would call back. Well, 4 days later over the weekend she had nevered called back. So on the phone again for the third time and after 20 plus minutes again was told that when I did it online I click the plan that didn't include international call only the data plan. Explained that I never saw the difference in the plan packages so put on hold again and was told that they could credit $100 to my bill. Wow, thanks alot !!! We have been Verizon customers for probably atleast 12 years and this is how you treat your long term customers?

    Verizon Wireless Customer Support wrote:
    AHARDY454,
    We definitely want to review options on what has happened. We are now connection, so you can hover over my username and send me a Direct Meesage so we can review your account information. We look forward to reviewing.
    Thank you,
    TonyG_VZW
    Follow us on Twitter @VZWSupport
    TonyG_VZW they can't exactly hover over your username unless you actually link it in your post. The generic username for all the reps just doesn't fly.

  • Change Time Constraint for Personal Data InfoType

    Hi,
    How to change the Time Constraint for Personal Data InfoType.
    I tried to do it in Customisation Procedure --> Infotypes, but the option to change Time Constraint is disabled for Infotype 0002.
    Thanks

    Hi,
    you can change time constraints in general attributes of infotype attributes,this can be done through table maintenace view V_T582A.
    But note that we cannot change the time contraints for mandatory infotyepe of personnel in an organization i.e -0000,0001,0002.
    ex:- without personal details like names no personnel will exist in an organization.
    regards,
    Soori

  • Use of COMnn/NUMnn fields in infotype 0032 (Internal Data)

    Hi,
    Please advise how to use the COMnn /NUMnn fields in infotype 0032 (Internal Data). Those fields are not available as screenfields in the screens of MP003200 and also therefore available for configuration in v_t588m. Those fields look suspiciosly as being mean to provide a subview of it0105 but again not sure how that should work?
    Thanks in advance for any input!
    Regards,
    Philipp

    Hi Philipp,
    The fileds you are referring to are not showing on my system either.
    Yet, we are only talking about dynpro 2000, aren't we ?
    If they are not present on the screen, there is no way to show them through customization.
    If you want to use them, one approach would be to create a custom-specific subscreen and add the standard field in it (I already did that in the past).
    There is a 2306 dynpro with a Q-structure that seems to use some of these fields.
    Best regards,
    Guillaume

  • How to change the default "no data found"

    Hi,
    Is there a way to change the default "no data found" message of the "When No Data Found Message" in the Report Attributes?
    I would like to change that message for a French message. I know that I can change it manually in every section, but I would like another default messages appearing when i create a Report Section.
    Thanks

    Can you point me to a tutorial?Sure, Users Guide > Managing...Globalization (Chapter 15?)
    Is this not happening at run-time?Yes. What happens at runtime is the selection of the application to run. If you run a page in the Application Builder (app 4000) and that application had not been translated or your browser language were set to some flavor (flavour) of English, you get 4000. If app 4000 had been translated to French, say, and you request a page in 4000 and have your browser language set to French, then you'll really run the requested page from app 4002 which is a copy of 4000 translated to French long before your request came along.
    If you look at our distribution, you'll find 9 (or more) versions of each of the internal applications in the builder directory.
    Scott

  • No international data plan for one year-???

    Here is the background.  I moved over to Verizon about 4 months ago from Alltel.  I did this because I wanted to be able to have a blackberry with international BBm'ing.  I did not go with ATT because there coverage was spotty in my area.  Since the move, I would say my Alltel coverage was 3x better then the cuurent verizon in my house even with the network extender ( BB don't work well with network extender compare to droids, according to the VZW reps).  I did not stay with Alltel because they did not have the storm2.  I needed 6 lines and a mifi and the local verizon rep told me no problem that they could do one primary line and 5 additonal line plus the mifi but after I signed up they realized that I maxed out at 5 lines on one account and they made me make my 6th line a primary line and then added the mifi to the 2nd account.  More costs per month.  Within a month of having my VZW account, one of my kid went to China and we were able to add the international data plan for her trip so she could BBM us.  No problems.
    Here is the problem.  I am going abroad in 2 days and would like to put the international data plan on 2 phones for the trip.  The rep says he cannot do becaue the polciies have changed with the "xerox" buyout and they won't let me do it for the following reasons.
    1.  I have not had my phones for more than one year even though I paid a deposit on them
    2. I have 7 lines on one account- not true I have one account with 1 primary line and 4 additional lines and I have another account with one primary line and the mifi account.  they are all billed on the same statement.  If they are all "one account" then VZW owes me a refund on the 2nd account's primary line as they cannot have it both ways. 
     We came to verizon for the purpose of BBM’ing when going international and now we cannot use it.  I am paying over $500.00 a month and have not been late on any payments, paid a deposit on the phones, am paying for 2 primary lines and did this a few weeks ago for my daughter and now I cannot add the international option again for a week of vacation abroad?  This is really upsetting and pretty much the last straw if it does not get resolved before this trip.  I should have stayed at Alltel or went to ATT and got an I phone because this is no better.    The rep I talked too was bedeviled by this policy and went two levels up in supervisors and was denied.  They are supposed to call me to resolve this issue tonight or in the morning. 
    {word filter avoidance}

    Update:
    I got a call from my local rep at the store where I bought all the phones.  She said they called corporate and all blocks on my international data plan have been removed?  I will stop by this afternoon and confirm that it has all been done???? I still cannot believe how many hoops I will have had to jump through to get this done as it was done 2 months ago, if it actually gets done.
    If it does not get done then i will be requesting to be let out of my contract for breach of contract on Verizon's part as it was never told to me that I could not have international service for one year after signing up and we were able to do it within a month of signing up initially.  Will post updates

  • To track changes to the master data

    Is there a report or program to run to see, who made changes to the master data, deleted a record or so?
    Please help.

    Hi ,
    Use the report RPUAUD00(Logged changes in infotype data). This report is  to display all documents that were created with the creation of infotype log (short: Change documents). any changes, creation/deletion.
    to ensure that changes to infotype fields are entered (changes, creations, deletions), these fields must be maintained in the following views: HR Documents: Infotypes with Documents (V_T585A), HR Documents: Field Group Definition (V_T585B), and HR Documents: Field Group Characteristics (V_T585C).
    Hope this hellp you.

  • Problem in actions change before ear retro date 1.4.2011 acc to controlreco

    HI Experts,
    Got an issue while performing an action "International assignent reentry".
    One of my employee has returned from international assignement.While performing an action   "International assignent reentry"
    i am getting an error  "Change before earlist retro date 01.04.2011 according to control record ss".It is showing while updating the payroll area and personnel subarea in 0001 IT.
    We are trying to do action with the date 15.07.2011.
    In pu03  earliest pers. RA date mentioned as 01.04.2011,earliest MD change,bonus change as 15.07.2011.
    In control record ..earliriest retro accounting period as 01 2011 which is April 2011.
    Now control record is on Exit mode.
    Please advice me to resolve the problem.
    Regards,
    Sairam.

    HI
    Thanks for the reply.If we remove  the  date in earliest per. retro accounting..what are the implications.
    in pu03 ..earlist pers. RA date is maintained as 01.04.2011
    We are doing an action with efective from 15.07.2011.
    Why the system is showing an error ""change before earliest retro date  1.4.2011 acc to control record to PY area ss.""
    After deletion of date in the field of Earlist pers. RA date from puo3 ..after doing the action..shall we put the date as 01.04.2011 in the fiels.
    Please advice.
    Sairam.
    Even after deleting the  Earl. pers RA date also ..we are getting the same error.
    The payroll control record is in exit mode.
    Please advice.
    Sairam.
    Edited by: sathyasairam on Jul 18, 2011 1:54 PM

  • Ad-Hoc Query (Personal Data Infotype)

    Hi,
    Our employees are able to update/correct any personal details (name changes, addresses, NI number etc) using ESS.These changes are reflected in the personal data infotype. I would like ot run an ad-hoc query to pick up any personal changes that employees make.
    How do I do this?
    Thanks

    You can do this by checking the AEDTM field of the infotypes.
    Regards,
    Amit

  • Is there any retro effect for this changes we made in 2001 Infotype for

    HI Experts...
    Please advice me on the follwing absence issue.
    In my clients company.... .... one of Personnel areas employees Earned leave records are not updating in 2001 Infotype from the begining.
    Now they wish to have to update in 2001 Infotype.
    What  are the  Retro effects after updating the EL s in 2001 IT for previous dates.
    Is there any retro effect for this changes we made in 2001 Infotype for the past dates.
    We dont need retro effected from those changes.
    Please advice...
    Sai.

    HI Vincent....
    Thanks for the reply.
    Last month professional tax rates were shown up correctly only.
    For the employees slab rates are similar  that is  200 per month.
    Last month professional  tax rates  were correct only.
    For the current month also the prof tax amount is showing up correctly only.
    Please advice to get the professional tax amount in the payslip.
    Regards,
    V Sai.

  • AEDTM no change to the new date when delimit done

    Hai,
    I have a question and would like to know whether it is a std SAP behavior or not? Where the delimit function (example delimit infotype 0014) is changing to new change date at field AEDTM? It's the same date which the record was created earlier or not? At field AEDTM it's look like the new changing date is not appear and its hard for user to define when was the action has been delimited.
    For info report S_AHR_61016380 - Logged Changes in Infotype Data, still not able to meet our user needs.
    Is there any notes or patch that need to be apply to address this problem?

    Hi Marini,
    As of release 4.0A the logic is that if the CONTENT of an infotype          
    record is changed the new UNAME and AEDTM are stored in the record.         
    If only the validity range of an infotype record changes by copying, or     
    by the delimit functionality the former UNAME (and AEDTM) stays.                                                                               
    That means: If the function delimit is used, or if for an infotype with     
    time constraint 1 or 2 a new record is created which delimits a former      
    record for the delimited record the former values of UNAME and AEDTM        
    are still stored and not updated.                                                                               
    The fields "changed by" (UNAME) and "changed on" (AEDTM) are only           
    updated, when a field other then 'end date' (ENNDA) has been changed.                                                                               
    To further clarify, if you use transaction PA30 and the function            
    'Change', the fields UNAME and AEDTM will be updated.  It is with         
    the function 'Delimit' that only the end date of the infotype               
    will change.                                                                               
    If you want to store the information when and by whom an infotype has       
    been changed, you can activate the infotype change documents which is       
    designed for the tracking of changes on infotype records.                                                                               
    The IMG Path is: Pers Mngt > Pers Admin > Tools > Revision > Set up         
    Change Document.                                                                               
    Some further explanation is provided in note 333493.                        
    However if you want the old functionality back, please have a look at       
    the other note I attached, 353788.                                                                               
    An important issue to keep in mind when you implement the changes of        
    this note 353788, is that these source corrections will NOT be taken up     
    in SAP standard and also not be delivered by HR Support Package.            
    Regards,
    Ana

  • Internal Data Transfer to Funds Management

    Hello All,
    We are implementing the Funds Management in the middle of the Fiscal year, now all the settings are done and budget also uploaded.
    Now my question is How to convert the previous documents into funds management which were posted from the year starting 01.04.2008.(FI and MM documents including park documents)
    For this I am refering the following IMG steps, i.e Internal Data Transfer to Funds Management-Supplementary Account Assignment-Select Documents-Convert Worklist-Display Worklist
    Here I am unable to understand what is happening in the first step and second step
    Can any one pls clarify and give correct solution
    Regards
    Uma

    Hello Uma,
    In PSM-FM you have similar processes in two-steps (select and run), first selecting the data and after that processing the data.
    In the step "Select Documents" (step 1) you select the documents, based on your selection criteria, for which you want to provide a supplementary account assignment within your company code. The documents selected are displayed in a worklist.
    You can provide the documents with a supplementary account assignment in an additional step by converting the worklist (step 2).
    In the Convert Worklist section (step 2), you add account assignments to the documents contained in the work list (generated by the step 1) for your FM area. The documents to which an account assignment is added are displayed in a list which shows the original account assignment and the changed account assignment for each document.
    With each program run, the system assigns a run number. You can use this run number as a selection criterion for selective deletion or selective display of the work list. This is very useful if you do not want to do the running process (convert worklist) in one step, you can convert in more than one step.
    To convert (step 2) you must first have selected the documents (step 1) to which you want to add an account assignment.
    For example, you can in the step 1 select ALL the documents that you want to convert and in the step 2 you can split in more than one process (due to performance or checking reasons) the data generated in the step 1.
    The option "Display Worklist" is to check the worklist generated in the step 1 for a specific FM area based on particular selection criteria. If no data was deleted from the worklist, the worklist contains all the information on the supplementary account assignment:
    The system assigns a run number during each program run for converting the work list. You can use this number as a selection criterion when displaying the work list.
    You can display these documents by starting the program without specifying a run number.
    You can test this process with a single document in step 1 and step2 and you will see that the step 1 only makes the document as selected and the real change will happen in the step2.
    I hope I could clarify the process
    Best Regards,
    Vanessa.

  • Change Org Unit in 0001 Infotype

    Hi Experts,
    Ple guide me how to change the Org Unit in Infotype 0001.
    The scenario is we have not assigned Org Unit to some employees while uploading.  Now we have to change the Org Unit in 0001 for some 50 employees. 
    What is the procedure to be followed?
    Regards
    Venu

    Hi Venu,
    If you had already uploaded the Position for 50 employees in IT 0001 than just maintained the Position to Org unit relationship  and org unit will appear in IT 0001.
    if you had uploaded the master data with Default position, than you need to create position  or assign the existing position with the person and create the relationship with the org unit
    you may use TC PPOME, PP03 OR PP01
    Trust this will help you
    warm rgds
    vishal saxena

  • How to disable International Data Roaming

    Today I connected to wireless data service from my Samsung Tab from India unintentionally and without being aware of the extremely high cost of such usage.  I got an email alert and estimated charges of $ 81.92 for merely 3.53 MB.   More expensive than GOLD !!!
    I was trying to send Verizon an email to disable INTERNATIONAL DATA ACCESS & ROAMING for my Tablet BUT cannot find any Verizon Support email address to contact them.  THATS A SHAME.
    I also signed to my account but there is no feature to disable international roaming. 
    I am so scarred even to turn on my tab for the fear that the device may automatically try to connect with service providers here in India and incur big charges for me. 

    Hi Melissa,
    I don't know how the device/service started communicating via 3G when the icon on the Samsung Galaxy Tab was showing as Wi-Fi connection.  I am having this device/service from Verizon for over 3 years now & been using a lot & had no similar incident when using in the US.  
    For the fear of unintended 3G connectivity & the charges there-off, I have completely stopped the usage of my Samsung Tab in India.  It has been TURNED OFF since 10/09/13.    I will check to see if I can find Deny Data Roaming on my Samsung Galaxy Device.  I did not find any such feature on my Verizon web account.
    As, I will be back in the US by 10/28/13 -  it does not make much sense to change plans for such a short time.  However,  I would like to know if the charges can be discounted or partially waived on a one time basis and to be considered in the $ 25 / 100 MB international data package instead of $ 81.92 charged at this time.
    Thank you.
    Veena

Maybe you are looking for