GCCFSS does not correctly build sqlite

I tried to build sqlite with gccfss but to no avail. There are strange problems executing the code.
OS: Solaris 10 8/07 s10s_u4wos_12b SPARC
gccfss: 4.2.0, 4.2.1
sqlite: 3.5.9, 3.6.6.2
python-sqlite: 2.3.3, 2.5.1
Python: 2.5.2 (r252:60911, Nov 13 2008, 23:09:26) [GCC 4.2.0 (gccfss)] on sunos5
sqlite build configuration:
CFLAGS="-O2 -g -m32 -mcpu=ultrasparc -DSQLITE_ENABLE_COLUMN_METADATA=1 -DSQLITE_DISABLE_DIRSYNC=1 -Wall"
or CFLAGS="-O0 -DSQLITE_ENABLE_COLUMN_METADATA=1 -DSQLITE_DISABLE_DIRSYNC=1 -Wall"
./configure host=sparcv9-sun-solaris2.10 build=sparcv9-sun-solaris2.10 target=sparcv9-sun-solaris2.10 disable-tcl disable-static enable-utf8 enable-threadsafe enable-threads-override-locks --enable-load-extension
Symptoms:
- sqlite can not handle subselect/nested SQL statements with "as" clause, column alias names are ignored
- sqlite seems to be unable to use some indexes
- creating sqlite database works, though
- python-sqlite (http://www.pysqlite.org) test gives: FAILED (failures=4, errors=3) or breaks with bus error in the sqlite journal writing code
The python-sqlite test errors are "KeyError: 'a'", "IndexError: No item with that key", or "OperationalError: no such column: x" and assertion errors, which seem to be very strange because everything else seem to work. Note that I have to skip the sqlite tests because I don't have tcl/tk installed so I use the python-sqlite test instead.
I have tracked down the issue to gccfss because building sqlite with /usr/sfw/bin/gcc 3.4.3 (csl-sol210-3_4-branch+sol_rpath) works flawlessly and all python-sqlite tests succeed.
So, I don't know how to help myself and I ask you for any hints how I can successfully build sqlite with gccfss. It confuses me that even -O0 does not work for me.
Hope this helps. I have python-sqlite test logs and gdb backtraces available but I don't want to flood this forum.
Best regards,
Jörg

We will try to reproduce your problem in house and come back with any workarounds or suggestions. Thank you for reporting this.
Prashanth

Similar Messages

  • Error "can not start the configuration in parallel does not correct"

    Hello everybody,
    I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
    Thanks in advance!

    Check this KB
                  1678498  - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error

  • The selected Flex SDK does not support building mobile projects

    I am unable to create a new Actionscript Mobile project.  The new project dialogue gives the error: "The selected Flex SDK does not support building mobile projects."  I tried seting the default Flec SDK both to the SDK included with Flash Builder 4.7, and also to a version of the 4.6.0 SDK (build 23201) with AIR 3.3 SDK overlayed on it, which already existed on my computer.  Both resulted in the same error.  Any ideas?

    Hi ,
    Actionscript Mobile projects use AIR SDK by default in Flash Builder 4.7 . Flex SDK won't be used for Actionscript projects.
    Could you please try creating an Actionscript project in fresh workspace and let me know if the issue still exists.
    Also attach screenshot and error log if any.
    Thanks,
    Sanjay

  • Freight Charges does not correctly show Tax % / calaculate

    Hi
    When I try to add freight charges to an A/P invoice the tax group shows correctly (V1) but the Tax % shows 0.0 instead of 7.5 on every row/type of freight and therefore the Tax is not calculated automatically.
    Somebody an idea whats wrong?
    Thanks
    Franz

    Problem solved.
    As a difference to all the other modules, A/P Invoice does not have the current day as default posting date (maybe this a bug). Since the Tax calculation needs the posting date, it does not correctly show the Tax on the main form as well as on the freight dialog, it shows the correct code, but always with 0%.
    So, for correct tax calculation, always make sure the posting date is entered before.
    @SAP: Change the behavior with the default posting date, as it is in all other modules.
    Best regards,
    Franz

  • Story does not correctly export fdx file with scene numbers? Bug needs to be fixed.

    Story does not correctly export fdx file with scene numbers? Bug needs to be fixed.

    Okay, Even if i remove the scene numbers from Story and export the file to Final Draft 8. The format in incorrect. The "transitions" ex. CUT TO:  are not in the correct allignment. Also there are numbers on each of the dialogues
    Pretty much alot of the formatting is not the same. Spaces  that break dialouge and action which are there in Story, are not converted over to Final Draft.
    Please fix this as soon as possible.
    thanks,
    Rohit

  • I have typos in my podcast description. Updating the RSS does not correct this. How can I get iTunes to re-read my RSS???

    I have typos in my podcast description. Updating the RSS does not correct this. How can I get iTunes to re-read my RSS???

    Thanks for your help.
    Here are the RSS feeds:
    http://www.solidrockvista.com/Podcasts/Lite/rss.xml
    http://www.solidrockvista.com/Podcasts/Phat/rss.xml
    And here are the iTunes pages:
    http://itunes.apple.com/us/podcast/james-world-lite/id162059136
    http://itunes.apple.com/us/podcast/james-world-phat/id162296074
    Both Podcast Descriptions have typos.

  • ACL does not correctly order the permissions when they are updated

    Outlook Connector sjab32.dll 7.1.228.0 sjms32.dll 7.1.228.0 sjui32.dll 7.1.228.0 sjtp32.dll 7.1.228.0
    Problem: We have identifed an issue with editing calendar permissions using the Outlook Connector. Basically the calendar ACEs are evaluated on a first match basic. Outlook Connector does not correctly order the permissions when they are updated. A brief example is below. Editing permissions via UWC works fine and will in fact fix any out of order ACE entries.
    Basic calendar permission:
    1.aces=@@o^a^rsf^g;@@o^p^rw^g;@@o^c^wdeic^g;@^a^sf^g;@^c^^g;@^p^r^g^
    after adding user mab, Ace has now been re-ordered so that the everyone permissions are now before the owner permissions:
    2.aces=mab^p^r^g;mab^c^rwd^g;mab^a^rsf^g;@^c^rwd^d;@^c^^g;@^p^r^g;@^a^sf^g;@@o^c^wdeic^g;@@o^p^rw^g;@@o^a^rsf^g
    any suggestion as to why this re-ordering is happening when updated through OC and any supporting doucuments for ACL

    Hi,
    This issue is most likely related to bug #6471869 (Outlook Connector allows invites to users with restricted permissions). This has been fixed in the latest Outlook Connector 7.1_233 (aka 122018-09). I recommend logging a Sun support case to get a copy of this new release.
    Regards,
    Shane.

  • Iphone 5 C freezes reboot does not correct issue

    iphone 5C freezes, reboot does not correct or solve issue

    Hi bogside2,
    Thanks for the question. Based on what you stated, it seems like the iPhone is not responding. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    iOS: Not responding or does not turn on - Apple Support
    Thanks for using Apple Support Communities.
    Cheers,
    Mario

  • Lr 5.6 error message that reading preview cache failed and will correct when reopened; does not correct on reopening; removing preview.lrdata files allows LR to open but photos not shown; what action should I take next?

    Lr 5.6 error message that reading preview cache failed and will correct when reopened; does not correct on reopening; removing preview.lrdata files allows LR to open but photos not shown; what action should I take next?

    Yikesyou have helped me before and I thank you for that.  Funny how at the last resort I ask a question and then an hour later I fix something that has been broken for five days.  I got off on the wrong foot with Lightroom installation and I really stepped in it...a lot had to do with a bad hard drive and all that.  I still have remnants of catalogues etc so I am never quite sure where I am.  I ran a search and found more than one .lrdata files.  I finally got the right one to delete and I think I am okI'll be crying to you again if I am wrongall best, thanks again for your helpjim sterne

  • Premiere CS4 Does Not Correctly Export Quicktime

    Hello,
    When CS4 initially came out, all of the Quicktime exports were messed up. Now after several patches it still seems that it is not completely correct. I have rendered out of a 3d app sequential images with a white background and an alpha channel. When I import these into Premiere, when the alpha channel is disabled for the clip, it correctly shows a white background in the monitor. But when I export this clip to Quicktime Animation and turn on 32 bit depth, it creates the clip with an alpha channel, but when the alpha channel is disabled on the clip, it renders the background still as black, but with no alpha. It should render it as white. Quicktime Animation clips created this way with other Quicktime exporting software does not do this, and so I believe this is a bug. Where can this be logged?
    thx

    It's not a problem with Quicktime, but rather Premiere CS4 because other apps can create the same thing correctly, using the Quicktime Animation codec.
    thx

  • I have an index page that does not correctly load css, but css works on all other pages in the site.

    http://www.boulderridgecondos.com/ does not load the css correctly, but ALL other pages in the site do load the css correctly. There is nothing different (that I can identify) between the pages.
    http://www.boulderridgecondos.com/news.htm
    I am guessing that there is something wrong in the css, I inherited this site and have gone over the css but can't find a issue that would cause this to occur.
    Any help or suggestions to research something would be appreciated.

    That page is saved as UTF-16 (Content-Type: text/html (BOM UTF-16, litte-endian)) in your text editor. The CSS file is send as ISO-8859-1. Firefox likes to see all files in the same encoding. The other pages are send as ISO-8859-1 and thus use that CSS file. You will have to re-save that page as ISO-8859-1 and upload that corrected version.

  • ISync does not correctly connect with or identify my Samsung A437 Phone

    I just got an AT&T Samsung A437 Phone (courtesy of work). I have connected the phone to my computer via the USB cable supplied by AT&T, but the phone is not correctly identified/connected to iSync. The phone shows up in iSync as an "unidentified Motorola phone" and iSync won't/can't talk to it. The phone also does not mount on the desktop for file transfers.
    Any help or suggestions (besides the obvious "get an iPhone" - my company bought this subscription - I don't have a choice of equipment) would be appreciated. TIA.
    Webb Sussman

    I also have a A437 and am trying to get my MacBook Pro to recognize it with no success. There doesn't appear to be an option in the Samsung setup to make the device 'recognizable', but I thought the Mac would simply find the device when I went into setup.

  • Mail does not correctly reflect read status of Gmail IMAP messages

    Apple Mail is no longer correctly reflecting the read status of emails that have been read on other devices/computers when viewing my Gmail IMAP inbox. Whereas my iPhone and Gmail account both show changes in items' read status immediately or on next mail retrieval, in Apple Mail the only way I have currently of updating the read status is to quit Mail and restart it. Neither automatic fetching of Mail, nor clicking "Get Mail", nor right-clicking the Inbox and choosing "Synchronize Gmail" work.
    My other IMAP account (MobileMe) does not exhibit this behaviour, but Mail.app does this with Gmail on both of my desktop computers.
    Anyone out there with a similar problem? And are there any possible solutions, or is it a bug/incompatibility with GMail?

    This problem is still occurring for me in 10.5.5 - I even tested it by creating a new gmail account with only 1 message in it, in case it was a problem with large mailboxes, and the same thing happened.
    Mail messages marked read elsewhere are not updated in Mail on the next send/receive. I wonder if everyone with this problem could report the bug at http://www.apple.com/support/feedback and see if we can get this solved in 10.5.6

  • HT1386 My iPod touch does not correctly sync my music I choose in iTunes on the iPod. Any suggestions?

    I have more music in my iTunes library than I want on my iPod touch. The solution used to be simple: I simply check off the albums etc. that I want to sync. Now when I do that it goes through all the sync motions but nothing really happens. The same music that was on the iPod stays there and but the songs I've selected to sync don't appear.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Uploaded page does not correctly display hidden layers

    Hi,
    I am a bit baffled by this as I haven't seen this in all my
    years using Dreamweaver.
    I have created a few links, that when rolled over they
    display a hidden layer that contains a styled table of contents (No
    links in the tables).
    This works perfectly as expected on my testing server, but
    when it is uploaded to the client webserver, the hidden layers
    display below each link, throwing the page out completely, and also
    the CSS style does not apply.
    Is there something on the clients webserver that needs to be
    changed or tweeked to recognise hidden layers, CSS etc?
    Cheers

    Are the layers actually hidden in the code? I mean when you
    look at the
    code view of the page (either in the CSS or the inline styles
    for the
    layers, depending on what DW version you are using), do you
    see -
    visibility:hidden
    or -
    visibility:visible
    Which?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Macnimation" <[email protected]> wrote in
    message
    news:e3q43i$1hg$[email protected]..
    > Hi,
    >
    > I am a bit baffled by this as I haven't seen this in all
    my years using
    > Dreamweaver.
    >
    > I have created a few links, that when rolled over they
    display a hidden
    > layer
    > that contains a styled table of contents (No links in
    the tables).
    >
    > This works perfectly as expected on my testing server,
    but when it is
    > uploaded
    > to the client webserver, the hidden layers display below
    each link,
    > throwing
    > the page out completely, and also the CSS style does not
    apply.
    >
    > Is there something on the clients webserver that needs
    to be changed or
    > tweeked to recognise hidden layers, CSS etc?
    >
    > Cheers
    >

Maybe you are looking for