Genaric Data Source in Bank Analyzer

Hi,
I'm using Bank Analyzer 5.0 and need to intergrated with BI 7 for reporting. We have some customize reports which need to mannual create the Data Source in BA. I had created a generic data source in Bank Analyzer 5.0. But when i try to extract by using RSA3, no records was found. I tested to replicate over that Data Source into BI, it works, but without any records inside. Anyone here can help?
Thanks in advance.

Hi Kris,
For me, I would think BA is more on functional. You need to understand the banking credit knowledge and also the calculation. You will need to Model the different product by using a diffenrent template in BA. You may not need a BI knowledge to drive BA but basic BI knowledge like create key figures and chareteristic is required for configuration of new fields in BA. Because there is a Tool BI in BA which is very similiar to BI.
A BI knowledge is strongly needed if you are using the BA tool BI to do the ETL.
To have more understanding on BA, you may go to the link as below. Hope I answer your question.
http://help.sap.com/saphelp_bankanalyzer50/helpdata/en/f9/cdc23b95c8cb6fe10000000a114084/frameset.htm
Regards

Similar Messages

Data source and Extract Structure

Hi all,
I have a doubt on Data source and Extract Str,
when i used one info cube with some char and kf's
after i did extraction shall we change the extract strcuture prequently other wise better to use all the predefined extract strcuture hide in data source.
if i hide in datasource after extraction i want to use some of hide fields, so we can use it? if we can use how can we extract data for that specified hide fields to bw side.

If you wont to create the genaric data source at that time
you can create cube with some char and kf.
after extraction you wont to modify the structure ? if you mofify
the structure then replicate the data source and delete the data
and upload the data from r/3 to bw.its not correct way every time modifying the
structure.if you put hide means that fields are not coming to
bw side.if put modify the hide field ,first goto rsa6 edit data source
remove the hide check box and save after come to bw replicate the data source
delete the data and load the data (if you wont full data for hide field)
if you dont load full load means only available upto data only what ever field you modify the
hide to unhide,

How to extract data from Bank Analyzer 7.0 to BW 7.0 ?

People I would like to know how to extratact, danta from Bank Analyzer...
I know that it's have a way to creave a generic Data Source, but I would like to know if some one have a How to or a Documentation or a Hint.
Regards !

Hi,
I could find some information here:
https://forums.sdn.sap.com/thread.jspa?threadID=852946
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3668618d-0c01-0010-1ab5-aa75c3a4dfc2?QuickLink=index&overridelayout=true
-Vikram

Web Analyzer - ability to access external data sources?

Documentation on help.sap.com for the 2004s Web Analyzer notes it can render queries, query views, infoproviders, and <b>external data sources</b> for ad-hoc analysis in the standardized reporting template.
Can anyone clarify exactly what constitutes external data? To my knowledge, I didn't think it was possible to report on something outside of the BI instance (let's say an Oracle table on another server, for example).
Thanks in advance for your help.

Hi Scott,
in the Web Analyzer you can use external OLAP data sources(ODBO or XMLA) . Relational data sources are not supported in NW2004s.
You can set this up in the portal system landscape.
Please have a look on
http://help.sap.com/saphelp_nw2004s/helpdata/de/8e/020597f9b4486492e69283fab424fa/frameset.htm
and
http://help.sap.com/saphelp_nw2004s/helpdata/de/8e/020597f9b4486492e69283fab424fa/frameset.htm
Depending on the data source different capabilities are supported, so that some options are only available when you are using the BI OLAP Processor and won't be supported when using external data sources.
Heike

Dynamically rolling months forward in Analyzer with HFM data source

I'm building a dashboard in Analyzer 7.0. I want the reports to dynamically update each month so a user does not have to go in and change the month on each report. Normally I would use a sub variable (i.e. cur_month) however, the datasource is not Essbase, it's HFM.Anyone else using HFM as a data source and found a feesible way to roll months forward in Analyzer after the close? I looked at Personal variables, but that still leaves me with the same problem of someone having to go in and update each users personal variables.Suggestions are appreciated as well.Thanks,Gary CrisciSenior ConsultantPinnacle Group, [email protected]

I came up with a working solution. Analyzer allows you to retreive member lists from HFM. I created a member list called 'Current Month' and assigned a single member to it. I then pull the report using the member list and get the current month view. Now the admin only has to update the meber list once a month when the close is finished and all reports will "Dynamically" roll forward.Regards,

SAP Bank Analyzer in Banking services

Hi All,
Need some details about the SAP Bank Analyzer in Banking services.
Thanks,
Ulrich

Hi,
SAP best practices are showcased towards this objective in collaborating with different toolsets available to achieve IFRS goal. Bank Analyzer is a solution portfolio that can be recommended to achieve the IFRS goal. Bank Analyzer provides the application for Calculation, Analysis and Valuation of Financial products and supports the Financial and Risk Management processes for overall Bank control of financial products and the targeted architectural strategy for analytical solutions is marked by SAP Net weaver based on e-SOA concepts.
IFRA embraces layer architecture to ETL the Non Valuated Financial data in the SDL, Do the Calculation and Valuation procedures (CVPL/PML), Integrate different applications and consolidate the Valuated Data in RDL and report the desired data in SAP BI.
The changing requirements like SOX compliance, Basel reporting, IFRS give challenges to Banks to go for a software solution (BA) that is open and easily adjustable for all Bank controlling processes. All financial data Consolidation, Consistency, Data exchange across all application is called for. The changing new requirements call for a solution to combine the Revenue generating area (Financial products) and the Operational area (Business support). Hence the architectural solution IFRA in BA will provide the basis for Consistency, Transparency and Data exchange across FA, MA, RM and RR.
Bank Analyzer breaks the silo reporting by integrating internal and external reporting both in the management of Financials as well as risk and reduce the gap between FA and MA as well as RM and RR. Bank Analyzer Is a modeling environment which can be understood better when we elaborate the aspects of IFRA.
Firstly FDB provides the Single source of Truth as the core Financial and risk information are concentrated and integrated, secondly the Layer Model suits the adaptability to new requirements and further Strategies like Modularity, Openness makes Bank Analyzer focus on Bank Value chain Performance measurement on all aspects towards success.
Bank Analyzer has Analyzers to evaluate SAP AFI with Merge Scenario based on Multi GAAP results and Sub Ledger solution with GL integration. SAP Basel II solution, SAP Limit solution
Please let me know if you need more details.
Regards,

Bank Analyzer 5

We are integration Bank Analyzer to our source systems using DataStage and we are concerned that the performance of the imports using BAPI may be slower than expected.
Does anyone have experience of a BA system importing 20m+ positions on a daily basis.

I an very new to this banking project it is very interesting. I am working on Banking and financail services project particularly the conversion of the legacy data. I have 2 questions
Q1) What are the issues u2018technicallyu2019 in loading the GL Balances after go live i.e. after some values have been posted in them during the normal course of business upon go live. The rationale behind the question is that the client wants to complete its financial closure for the fiscal year 2010-2011 a few days into April 2011 and then migrate the GL Balances after the closure instead of taking one view on the 31st March and making adjustment entries thereafter. Is this possible and pros and cons are to be known.
2) What are the steps for the reconciliation of the legacy data coming from th eBank Analyzer into ECC FI GL I need to know the process and the transaction codes to vlaidate the conversion is complete.
Any tips and suggestions are welcome. More points for the reply
Regards and hope to hear from experts

How to create the generic data source for Labour costs report in BI (actual& plan costs)?

Hello Guru's
My requirement is to get the total labour costs in BEx analyzer.So i need to create custom DS for that. But i am not sure about the FICO tables which are having the Labour info..
I'm having the GR10 report from R/3 sidepls look at the document. But i am not sure about the report, how that built,and giude me on the report.
Please help on this to going forward.

Hi,
There are COOM data source which may suits your needs.
please check data source
0CO_OM_WBS_6
0CO_OM_WBS_3
Base tables are COSP and COSS.
Check about coom data source, if not suitable then go for custom data source.
About table cross verify with your source team.
Thanks

Unable to find data source

Hi All,
we have installed standard cubes and ODS from Business content. Now we want to load standard ODS but we are unable to identify standard data source.
0CPR_C03 - Infocube.
We have already checked in BI Content and help.sap.com but it doesnot display any data source name.
Kindly give input to find data source.
Regards,
Sathvik

Hi,
Now you got some clue, i.e. some datasource names supports the cube.So in that you need to analyze what feilds you want to and in which datasource you have all that feilds in that way you need to use the DS. For any other information you need to check in sap help sites, here I'm giving some tables in BW, so it will help you.
RSISOSMAP Mapping Between InfoSources and DataSources (=OLTP Sources)
RSOSFIELDMAP Mapping Between DataSource Fields and InfoObjects
RSTS Transfer Structure in SAP BW
ROOSGEN Generated Objects for a DataSource
ROOSOURCE Header Table for SAP BW DataSources (SAP Source System/BW System)
RODELTAM BW Delta Procedure (SAP Source System)
RSOLTPSOURCE Replication Table for DataSources in BW
Thanks
Reddy

Using SAP BI front-end on external data sources

We are currently reviewing the BI technical strategy at our organisation and SAP BI is in the running where we have a need to cover more data sources than just R/3.
Because of the investment made in building other reporting databases, in the short to medium term we are considering using SAP BI as the front-end.
I have built a Virtual InfoProvider using DTP on a SQL Server database, and initial findings are interesting.
I would also like to consider other methods of using SAP BI as a front-end, and this post is a plea for further options.
Some of the existing reports that we need to replace would be based on views in the database, whereas others are driven by result sets from stored procedures.
I am curious about where all the effort is made, for example, will all the filtering be applied at source or back in BW?
Will a user-entry variable allow a lookup to the source?
We have recently upgraded to NW2004s, although we have not implemented the Java Stack .... yet. We intend to complete the implementation by May 2008.
I would welcome any suggestions you might have, or if you are able to point me to further sources of information.
Ian.

The Web Analyzer within BI 7.0 JAVA run time can go against XMLA datasources (eg: MS Analysis Services) configured within EP system.
Visual Composer available within Ep 7 can go against any JDBC sources (Web Analyzer will have this functionality in the future.).

Performance issue with big CSV files as data source

Hi,
We are creating crystal reports for a large banking corporation with CSV files as data source. For some reports, we need join 2 csv files. The problem we met now is that when the 2 csv files are very large (both >200M), the performance is very bad and it takes an hour or so to refresh the data in Crystal Reports designer. The same case for either CR 11.5 or CR 2008.
And my question is, is there any way to improve performance in such situations? For example, can we create index on the csv files? If you have ever created reports connecting to CSV, your suggestions will be highly appreciated.
Thanks,
Ray

Certainly a reasonable concern...
The question at this point is, How are the reports going to be used and deployed once they are in production?
I'd look at it from that direction.
For example... They may be able to dump the data directly to another database on a separate server that would insulate the main enterprise server. This would allow the main server to run the necessary queries during off peak hours and would isolate any reporting activity to a "reporting database".
This would also keep the data secure and encrypted (it would continue to enjoy the security provided by an RDBMS). Text & csv files can be copied, emailed, altered & deleted by anyone who sees them. Placing them in encrypted .zip folders prevents them from being read by external applications.
<Hope you liked the sales pitch I wrote for you to give to the client... =^)
If all else fails and you're stuck using the csv files, at least see if they can get it all on one file. Joining the 2 files is killing you performance wise... More so than using 1 massive file.
Jason

Pivot table data source keeps referring to old file name

Hi,
I am using Excel 2013 on Windows 8
I create a table, and insert a pivot table that use this table as data source
I close the excel and rename the file from "myfile.xlsx" to "newfile.xlsx, and then open it again
When trying to refresh my Pivot Table, I get the following Error:
"We couldn't get the data from 'Table1' in the workbook 'C:\myfile.xlsx' Open this workbook in Excel and try again."
i.e. it is still looking for table using the old file name.
I need to update the file every week, so having to manually go back and change source file name for every pivot is very time consuming and painful for me :-(
Please investigate and advise how to fix this ?

Hi,
Based on my tested in my environment (Window 8.1 & Excel 2013), the error message pop up when a pivot table using an external data source. If you use the table as external data source, pivot table uses OLEDB to connect it, it'll refresh failed after
you changed the file name. It's by design.
Then, we may try the two workaround to avoid it:
1) Keep the data source table and pivot table in the same file.
2) Add the table to a connection, steps:
Click Data tab>Connection> Add> Browse more> Choose the file.
Please try to change in new file in property before you refresh the Pivot table.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

RPD as a Data Source in Informatica

I have a question. Has anyone ever tried importing the BI service as a datasource into Informatica? I'm posting the question to the Informatica community too. (OBIEE 10.1.3.4.2 & Informatica 8.1.1)
Since it's ODBC, I'm thinking there may be some flexibility. I can see the dimension objects from the RPD show like tables in a schema when importing it. However the objects are empty. No columns.
The reason why I'm attempting this is because we're trying to get to a database that cannot connect to Informatica due unavailibilty of ODBC drivers for the OS. However the db can connect to the server where the BI server resides.
Maybe I can retrieve the data from a connection pool that'll be added to the RPD. However dont expose it, but transform it (ETL) then load it to warehouse. Subsequently exposing it after it's been loaded.
Any one ever attempt something like this? (Not our first or second choice.)
Thanks,
Lael

Here is where we are with our current approach:
1. Have MySQL tables mapped as source in RPD
2. Have MySQL tables exposed in Presentation Layer
3. Can run answers query against MySQL data
Informatica
1. In Source Analyzer select Import Tables
2. Select Oracle BI Server as ODBC data source
3. Enter Connection Information
4. Use Admin Username and PW to connect
When I view the list of selected tables have two problems:
(1) The table names used are ones used in the Presentation Description (ex: - Account or - Account Address) which when selected does not match the physical name and causes an issue.
(2) The selected table list displays the presentation names for all of my Oracle imported tables but I do not see in this list the MySQL tables
Any help getting both 1 and 2 resolved would be appreciated.
Thanks...

Logistic Data source and loading sequence

Hi Gurus ,
Can anyone help me explain the use of the 2lis_02_CGR and 2lis_02_SCN.
I also need to know the data loading sequence for the following data source
2lis_02_HDR,
2lis_02_ITM,
2lis_02_SCL,
2lis_02_ SGR,
2lis_02_ CGR,
2lis_02_SCN
Thanks for your help

Hi,
i.Purchasing Data (Header Level)
Technical name: 2LIS_02_HDR
Technical Data
Type of DataSource:
Transaction Data (Movement Data)
Application Component:
Materials Management (MM)
Available as of OLTP Release
SAP R/3 4.0B
Available as of Plug-In Release
PI 2000.1
RemoteCube Compatibility:no
Prerequisites:
Activation of the DataSource.
Use :
The DataSource is used to extract the basic data for analyses of purchasing documents consistently to a BW system.
ii.Purchasing Data (Item Level)
Technical name: 2LIS_02_ITM
Technical Data
Type of DataSource:
Transaction Data (Movement Data)
Application Component:
Materials Management (MM)
Available as of OLTP Release
SAP R/3 4.0B
Available as of Plug-In Release
PI 2000.1
RemoteCube Compatibility:no
Prerequisites:
Activation of the DataSource.
Use :
The DataSource is used to extract the basic data for analyses of purchasing documents consistently to a BW system.
Delta Update:
A delta update is supported. Delta process: ABR Complete delta update with deletion indicator using delta queue (Cube-compatible).
iii.Purchasing Data (Schedule Line Level)
Technical name: 2LIS_02_SCL
Technical Data
Type of DataSource:
Transaction data
Application Component:
Materials Management (MM)
Available from OLTP Release
SAP R/3 4.0B
Available from Plug-In Release
PI 2000.1
RemoteCube Compatibility:No
Prerequisites:
Activation of the DataSource.
Use:
This DataSource extracts consistent basic data for analyzing purchasing documents to a BW system.
Delta Update:
A Delta update is supported. Delta process: ABR Complete delta with deletion indicators using delta queue (Cube-compatible).
iv.Allocation - Schedule Line with Goods Receipt
Technical name: 2LIS_02_SGR
Technical Data
Type of DataSource:
Transaction Data (Movement Data)
Application Component:
Materials Management (MM)
Available as of OLTP Release
SAP R/3 4.0B
Available as of Plug-In Release
PI 2002.1
RemoteCube Compatibility:No
Prerequisites:
Activation of the DataSource.
Use:
This DataSource is used to extract the schedule line quantities allocated with goods receipt quantities consistently to a BW system.
Delta Update:
A delta update is supported. Delta process: ABR Complete delta update with deletion indicator using delta queue (Cube-compatible).
v.Allocation - Confirmation with Goods Receipt
Technical name: 2LIS_02_CGR
Technical Data
Type of DataSource:
Transaction Data (Movement Data)
Application Component:
Materials Management (MM)
Available as of OLTP Release
SAP R/3 4.5B
Available as of Plug-In Release
PI 2002.1
RemoteCube Compatibility:No
Prerequisites:
Activation of the DataSource.
Use:
This DataSource is used to extract the confirmation quantities allocated with goods receipt quantities consistently to a BW system.
Delta Update:
A delta update is supported. Delta process: ABR Complete delta update with deletion indicator using delta queue (Cube-compatible).
vi.Allocation Confirmation with Schedule Line
Technical name: 2LIS_02_SCN
Technical Data
Type of DataSource:
Transaction Data (Movement Data)
Application Component:
Materials Management (MM)
Available as of OLTP Release
SAP R/3 4.5B
Available as of Plug-In Release
PI 2002.1
RemoteCube Compatibility:No
Prerequisites:
Activation of the DataSource.
Use:
The DataSource is used to extract the schedule line quantities allocated with confirmation quantities consistently to a BW system.
Delta Update:
A delta update is supported. Delta process: ABR Complete delta update with deletion indicator using delta queue (Cube-compatible).
If it helps assign points.
Thanks,
Akshay a.

PAYR Table Data source

Dear BI Experts,
We are planning to implement Payment details like check number and date and Bank Name.
Using PAYR table our requirement is matching.
But we are not getting related data source IN R/3.
Please suggest PAYR table data source.
Regards
Ramu.

Hi Ramu..
This may help
(0FI_AP_51)
http://help.sap.com/saphelp_nw70/helpdata/EN/db/0345943f9043e083c3ccba1e73b42a/frameset.htm
Regards,

Genaric Data Source in Bank Analyzer

Similar Messages

Maybe you are looking for