General data logging failure

I have been receiving this error message over the past week on our Lookout 5.0 setup. After this message, no data logging happens for any logged point, not just the alarmed point! This is shown in the default alarm window that comes out of the box with Lookout.
Lookout has v5.0 latest fixes file installed (as of mid 2006), Citadel was updated around the same time also. OS is W2K, SP4. Any ideas. Lookout and Citadel are the only things running on this box. Application is a typical base station talking to 45 remote sites. This is an example of the data logging failure alarms that I get on the alarm screen.
//basestation/Modbus045.43107: General data logging failure (0x800045005)
where the object name = '....Modbus045.43107' and the alarm description is 'General data logging failure (0x800045005)'
I have several of these alarms for various sites and tags (elevation, amperage, etc.).  I've noticed that when I get this error the computer doesn't log data and I can't clear the alarms. This has happened before but I cannot seem to replicate, seemly happens randomly. Sometimes several times a day, other times it will go for weeks or months. The only way to previously get out of it is to click OK, then restart computer. Checked OS processes prior to shutting down, lookout.exe and the ldcitdl.exe, ldads.exe, and ldtsrv.exe are all running, but at 0% CPU usage.
This last week, restarting the computer does not work anymore. System gives these types of errors after a restart. This system has been providing data consistently since its been placed in operation and lots of disk space left.
Any suggestions on where to start debugging?

I suggest you to create a new database.  In Max, right click "Historical Data", select Create New...
And then in Lookout, log data to this new one.  File->Modify process, uncheck "use default vaue" and select the new database.
If the new database works fine without the "logging failure " alarm, I think the database you are using may be corrupted.
Ryan Shi
National Instruments

Similar Messages

  • Help In keithley 2400 VI!!(Problem with the data logging and graph plotting)

    Hi,need help badly=(.
    My program works fine when i run it,and tested it out with a simple diode.The expected start current steps up nicely to the stop current.The only problem is when it ends,i cannot get the data log and the graph,though i already have write code for it.Can someone help me see what's wrong with the code?I've attached the necessary file below,and i'm working with Labview 7.1.
    Thanks in advance!!!
    Attachments:
    24xx Swp-I Meas-V gpib.llb ‏687 KB

    Good morning,
    Without the instrument it might be hard for others to help
    troubleshoot the problem.  Was there a
    specific LabVIEW programming question you had, are you having problems with the
    instrument communication, are there errors? 
    I’d like to help, but could you provide some more specific information
    on what problems you are encountering, and maybe accompany that with a simple
    example which demonstrates the behavior? 
    In general we don’t we will be unable to open specific code and debug,
    but I’d be happy to help with specific questions. 
    I did notice, though, that in your logging VI you have at
    least one section of code which appears to not do anything.  It could be that a small section of code, or
    a wire was removed and the data is not being updated correctly (see pic below).  Is your file being opened properly?  Is the data being passed to the file
    properly?  What are some of the things
    you have examined so far?
    Sorry I could not provide the ‘fix’, but I’m confident that
    we can help.  Thanks for posting, and
    have a great day-
    Message Edited by Travis M. on 07-11-2006 08:51 AM
    Travis M
    LabVIEW R&D
    National Instruments
    Attachments:
    untitled.JPG ‏88 KB

  • Self Service Restore - Data Centre Failure

    I'm evaluating the new 'Standard' tier of SQL database and self service restore feature. My question is about where the backups are stored for self service restore and whether they help in a full data centre failure. e.g. If my Standard SQL db is in Europe
    West and the only backup I am using is the in built self service restore. Do I have any protection if Europe West has a major DR event? Or do I still need to export the databases to blob storage to handle this kind of event? (Whereby I would need to restore
    to Europe North manually)

    As indicated in the "Service Tiers Details" table in this
    blog posting , we have a couple of new features which are not yet enabled for the new tiers.
    One feature will be the ability to restore a database to an alternate datacenter in case the primary data center you are using is not available OR for any other reason you may want to restore a database in an alternate location.  This recovery option
    uses geo-replicated backups.  For this feature we only geo-replicate the full and daily backups but not the log backups so point-in-time restore is not possible but you will have an RPO of less than 24-hours.  Think of this as always having access
    to daily off-site backups from any location.  This feature will be available for Basic, Standard and Premium. 
    The second feature which we will enable later is the geo-replication for Standard.  This feature will allow you to opt-in for geo-replicating your Standard database to a passive secondary in an alternate location.  We will have more details about
    this feature in a few weeks.
    Until you have access to one of the above two features you will have to use the export-to-blob for the datacenter failure case.  We are working hard to deliver the above two features as soon as we can.
    I hope this helps.
    Tonyp

  • Log failure 5210 validatedeployrootwithrecovery - windows deployment server

    Hi,
    I am receiving the following error after running sysprep and capture on a Windows 7 workstation following the restart. I have seen a lot of others with similar problems but none of the resolutions
    seem to resolve my issue.
    Wizard Error
    A connection to the deployment share
    (\\192.168.**.**\DeploymentShare$) could not be made.
    Connection Ok. Possible cause: invalid credentials.
    Retry: Try again to connect to the deployment share.
    Cancel: Give up, cancelling any in-progress task sequence.
    The correct drivers have been imported to the out of box drivers, but if I cancel this window a command prompt is displayed and if I run ipconfig, no configuration is displayed.
    The BDD.log is as follows
    <![LOG[FAILURE ( 5210 ): ValidateDeployRootWithRecovery: Cancel]LOG]!><time="10:57:34.000+000" date="06-11-2014" component="LiteTouch" context=""
    type="3" thread="" file="LiteTouch">
    The correct credentials are in the bootstrap.ini
    [Settings]
    Priority=Default
    KeyboardLocalePE=0809:00000809
    KeyboardLocale=0809:00000809
    [Default]
    DeployRoot=\\192.168.10.59\DeploymentShare$
    UserID=***
    UserDomain=************
    UserPassword=*********
    Any help you can provide would really be appreciated!!

    Hi,
    I suggest to erase the credentials from the bootstrap.ini file and manually input the username and password.
    The username should be like this format: domain\username, then password, more steps you can see this as a referenct:
    http://blogs.technet.com/b/askcore/archive/2009/10/06/how-to-run-a-sysprep-and-capture-task-sequence-from-mdt-2010.aspx
    Regards
    Wade Liu
    TechNet Community Support

  • Update of BP General Data during creation of BP

    Hi,
    I am currently using BADI ADDRESS_CHECK to perform an external check in a 3rd party application using XI to check if the customer name/address is flagged as a "denied party".
    This works fine and returns the correct response if the check finds a denied party.
    However, if this is the case ie. a denied party I want this to set some BP data accordingly during the same BP maintenance.
    The data I need to set is as follows:
    1. BP central block (general data)
    2. BP status needs to be set
    I have located function module BUP_MEMORY_BUT000_FILL that I am calling with a BP structure with the necessary block set to 'X' but it does not seem to do anything.
    Can anyone provide details on how to call this function module to set BP general data during a create or a change of a BP as I must be missing something.
    Also, can anyone tell me what the equivalent function module is for BP status data ?
    Any help is greatly appreciated.
    Cheers
    Colin.

    HI
    You cud use the following BAPI's for BP general data
    BUPA_CENTRAL_CHANGE
    Have a look at the function group:BUBA_4 in package :BUPA
    For status you could use the following
    CRM_BUPA_FRG0050_CHANGE
    CRM_BUPA_FRG0050_Create
    CRM_BUPA_FRG0050_GET_DETAIL
    CRM_BUPA_FRG0050_SAVE_COMMIT
    Regards
    Jay.

  • How can I display only the Data Logging pull down menu on my LV front panel?

    Is it possible to hide all unused pull down menu on my front panel vi like File, Edit, View etc.. and only
    display the pull down menu for the Data logging?!
    best regards
                          Norick

    Hey,
    You can build your own runtime menu (Edit>runtime menu) and then e.g. only display the application items you want to.
    Christian

  • How can I perform data logging for a specific time??

    hello everyone,
    I am quite new in labview and I have a basic question regarding data logging. Currently I am using a cRIO9074 and doing some data logging for my test. The data logging it self works ok so far.
    But my problem is I would like to write my datas in a text file either for a specific time interval (ex)10 seconds) or for a specific amounts of data (ex)500 Samples). Can anyone give me some help regarding my problem?? Attached you can find my RT.vi 
    I would appreciate for anyhelp!
    Regards
    Yun 
    Attachments:
    BP250 Encoder Position & Velocity (Host).vi ‏92 KB

    Run your loggging program for that time. When your program terminates then it will write all the logged data so far in text file.
    Kudos are always welcome if you got solution to some extent.
    I need my difficulties because they are necessary to enjoy my success.
    --Ranjeet

  • How do I control a data log session with period and sample time?

    I need a data logging system where the operator can select 2 logging parameters: Log Period and Sample Time. I also need a START and STOP button to control the logging session. For example, set the log period for 1 hour and the sampling time for 1 second. (I may be using the wrong jargon here.) In this case when the START button is clicked, the system starts logging for 1 second. An hour later, it logs data for another second, and so on until the operator clicks the STOP button. (I will also include a time limit so the logging session will automatically stop after a certain amount of time has elapsed.)
    It’s important that when the STOP button is clicked, that the system promptly stops logging. I cannot have the operator wait for up to an hour.
    Note that a logging session could last for several days. The application here involves a ship towing a barge at sea where they want to monitor and data log tow line tension. While the system is logging, I need the graph X-axis (autoscaled) to show the date and time. (I’m having trouble getting the graph to show the correct date and time.) For this application, I also need the system to promptly start data logging at a continuous high rate during alarm conditions.
    Of course I need to archive the data and retrieve it later for analysis. I think this part I can handle.
    Please make a recommendation for program control and provide sample code if you can. It’s the program control concepts that I think I mostly need help here. I also wish to use the Strip Chart Update Mode so the operator can easily view the entire logging session.
    DAQ Hardware: Not Selected Yet
    LabVIEW Version: 6.1 (Feel free to recommend a v7 solution because I need to soon get it anyway.)
    Operating System: Win 2000
    In summary:
    How do I control a graphing (data log) session for both period and sample time?
    How do I stop the session without having to wait for the period to end?
    How do I automatically interrupt and control a session during alarm conditions?
    Does it make a difference if there is more than one graph (or chart) involved where there are variable sample rates?
    Thanks,
    Dave

    Hello Dave,
    Sounds like you have quite the system to set up here. It doesn�t look like you are doing anything terribly complicated. You should be able to modify different examples for the different parts of your application. Examples are always the best place to start.
    For analog input, the �Cont Acq&Chart (buffered).vi� example is a great place to start. You can set the scan rate (scans/second) and how many different input channels you want to acquire. This example has its own stop button; it should be a simple matter to add a manual start button. To manually set how long the application runs, you could add a 100 ms delay to each iteration of the while loop (recommended anyway to allow processor to multi-task) and add a control that sets the number
    of iterations of the while loop.
    For logging data, a great example is the �Cont Acq to File (binary).vi� example.
    For different sample rate for different input lines, you could use two parallel loops both running the first example mentioned above. The data would not be able to be displayed on the same graph, however.
    If you have more specific questions about any of the different parts of your application, let me know and I�ll b happy to look further into it.
    Have a nice day!
    Robert M
    Applications Engineer
    National Instruments
    Robert Mortensen
    Software Engineer
    National Instruments

  • I have a question about General Data Selection in Report Painter

    Please help me out. Thi is the question....here it goes.
    In a Report in ReportPainter, I have in the General Data Selection the following selected characteristics. They are:
    Ledger = 0
    Record Type = 0
    Version = 1
    Fiscal Year = Z-ANOACT
    Period = (1CPERIV, 1CPERIB)
    So that we have the next screen in the Report’s execution.
    Fiscal Year : 2006
    From Period : 1
    To Period : 12
    Note:
    *Z-ANOACT = Variable so that with a user-exit calculates the actual year. Right now is 2006.
    *1CPERIV = This From-Period Variable is referenced to CCSS Table and PERBL Field Name. Its default value is 1.
    *1CPERIB = This To-Period Variable is referenced to CCSS Table and PERBL Field Name.
    Its default value is 12. Rigth now, we are in the fiscal month 5 (November).
    Id like to filtrate information from January,2006,Period:07 to November,2007,Period:05.
    I mean I work with the fiscal calendar because the information to get from the table is saved due to this calendar.
    The Fiscal Calendar is from July to June:
    Month          Period     Year
    January          07     2006     
    February     08     2006
    March          09     2006
    April          10     2006     
    May          11     2006                   
    June          12     2006
    July          01     2007
    Augost          02     2007
    September     03     2007     
    October          04     2007
    November     05     2007
    December      06     2007
    Right now, we are in November , 2006 (month=11) but according to the fiscal calendar we are in November, 2007 (month=5).
    How I can accommodate my variables or what I am doing wrong so that I can select information from periods 7 to 12, 2006 ( January to June, 2006) and information from periods 1 to 5, 2007 (July to November, 2007) having the screen cited above so that report painter adds the 2 ranges.
    I cannot do it with the criteria selection cited above because I only have a year and a range of periods and my end-user doesnt want to run my report twice:
    One run with periods 7 to 12, 2006 and
    Another run with periods 1 to 5, 2007 and then to add the 2 reports in excel to form a report.
    Hed like something in my screen like this……
    Fiscal Year = 2006
    From period = 7
    To Period = 12
    Fiscal Year = 2007
    From period = 1
    To Period = 5
    And then report painter will add the 2 ranges.
    Many Thanks if you know anything that can help me, please let me know.

    Please help me out. Thi is the question....here it goes.
    In a Report in ReportPainter, I have in the General Data Selection the following selected characteristics. They are:
    Ledger = 0
    Record Type = 0
    Version = 1
    Fiscal Year = Z-ANOACT
    Period = (1CPERIV, 1CPERIB)
    So that we have the next screen in the Report’s execution.
    Fiscal Year : 2006
    From Period : 1
    To Period : 12
    Note:
    *Z-ANOACT = Variable so that with a user-exit calculates the actual year. Right now is 2006.
    *1CPERIV = This From-Period Variable is referenced to CCSS Table and PERBL Field Name. Its default value is 1.
    *1CPERIB = This To-Period Variable is referenced to CCSS Table and PERBL Field Name.
    Its default value is 12. Rigth now, we are in the fiscal month 5 (November).
    Id like to filtrate information from January,2006,Period:07 to November,2007,Period:05.
    I mean I work with the fiscal calendar because the information to get from the table is saved due to this calendar.
    The Fiscal Calendar is from July to June:
    Month          Period     Year
    January          07     2006     
    February     08     2006
    March          09     2006
    April          10     2006     
    May          11     2006                   
    June          12     2006
    July          01     2007
    Augost          02     2007
    September     03     2007     
    October          04     2007
    November     05     2007
    December      06     2007
    Right now, we are in November , 2006 (month=11) but according to the fiscal calendar we are in November, 2007 (month=5).
    How I can accommodate my variables or what I am doing wrong so that I can select information from periods 7 to 12, 2006 ( January to June, 2006) and information from periods 1 to 5, 2007 (July to November, 2007) having the screen cited above so that report painter adds the 2 ranges.
    I cannot do it with the criteria selection cited above because I only have a year and a range of periods and my end-user doesnt want to run my report twice:
    One run with periods 7 to 12, 2006 and
    Another run with periods 1 to 5, 2007 and then to add the 2 reports in excel to form a report.
    Hed like something in my screen like this……
    Fiscal Year = 2006
    From period = 7
    To Period = 12
    Fiscal Year = 2007
    From period = 1
    To Period = 5
    And then report painter will add the 2 ranges.
    Many Thanks if you know anything that can help me, please let me know.

  • Assigning a new tab to the general data of business partner

    Hi,
    I have followed the steps of creating a field group, view, section. After adding my ztab in the screen sequence of the general data in business partner. But i am unable to see the tab in the BP.
    Can anyone suggest me on this?
    regds,
    Dimple c.

    Hi Deepika,
    Have you generated your screen in transaction BUSP. Select the object BUPA and generate all the screens. This should solve your problem. For your information EEWB is the alternative transaction to add the custom tab for these objects, you just have to run the wizard . This option is really very simple to enhance the objects.
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash.

  • With journaling, I have found that my computer is saving a large amount of data, logs of all the changes I make to files; how can I clean up these logs?

    With journaling, I have found that my computer is saving a large amount of data, logs of all the changes I make to files; how can I clean up these logs?
    For example, in Notes, I have written three notes; however if I click on 'All On My Mac' on the side bar, I see about 10 different versions of each note I make, it saves a version every time I add or delete a sentence.
    I also noticed, that when I write an email, Mail saves about 10 or more draft versions before the final is sent.
    I understand that all this journaling provides a level of security, and prevents data lost; but I was wondering, is there a function to clean up journal logs once in a while?
    Thanks
    Roz

    Are you using Microsoft word?  Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users.  I have seen this message from Microsoft word.  It's annoying.
    As BDaqua points out...
    When you copy information via edit > copy,  command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
    If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information.  Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
    You should be saving your work more than once a day. I'd save every 5 minutes.  command + s does a save.
    Robert

  • Add a new tab to General data in XD01

    Hi,
    I want to add a new tab to General data in XD01. I came across some BADI's(CUSTOMER_ADD_DATA, CUSTOMER_ADD_DATA_CS) which can be used to add pushbuttons(like General Data, Sales Area) and inside that we were able to add tabs. But i need to add a new tab inside General Data Button.
    Is there any Screen Exit to do this?
    Thanks,
    Savitha

    Hi,
    Try using BDTs. (Business Data Toolset)
    Check the area menu BUPT.
    Regards,
    Sharin

  • Adding standard Text as long text in QC01 of General data Section

    Hi ,
    I want to Append standard text in Certificate Profile Creation(QC01)of General data section. Can you suggest any Exit.
    Standard Texts created by SO10 Transaction.
          Thanks in advance

    Dear Raynard,
    Raynard Coscolluela wrote:
    As far as I can remember the Travel Request was conceptualize to be a simple ESS Form that's why most of the labels here are hard coded and didn't use OTR.
    I have to disagree. None of the labels, except this one are hard-coded via Personalization-Means and most Texts come indeed from the OTR, the Label T_ACTYPE_LABEL also has an entry in OTR (see my posts above) but is only non-changable by enhancements because the component configuration was "abused" to overload the OTR and coding in runtime. I still can't really believe this one is intentional....
    Raynard Coscolluela wrote:
    We don't recommend changing the label text in Web Portal as it can lead into inconsistency incase a new update will be > deliver by SAP into this fields. So yes this is a consider a modification.
    This will be an issue since the word "Spesen" which is a specific German one for "Expenses" is juridically wrong if used within a specific MOREI of the Public Sector. But this is another issue and I don't want to elaborate on this one here.
    Raynard Coscolluela wrote:
    My colleague who participate in this thread is still on vacation and she ask me to assist here.
    I see, and I'm glad you did assist here. Give Sally my regards.
    This one is answered then, if not really "solved". I'll close the OSS message now.
    thanks a lot and best regards,
    Lukas

  • Customer master-general data-attribute-creation

    Hi,
    I would like to use the attribute 1 to 10 fields in customer master general data to fill up relavant to customer . i have seen some SCN postings regarding activation of those fields technically.
    i want to create some data in the attribute same like customer group 1 , while creation of customer master , i shall select the drop down and save it
    what is the menu path/transaction code for that please
    Thanks and regards,
    Pratheep

    Hi
    Check this menu path and also check below document in which Suhaib Bin Aziz has explained how to find SPRO path from front end screen.
    How to find SPRO Path from any Particular Screen
    Thank$

  • Update the "remark" field in general data of a BP (using IDOC in LSMW)

    Hi,
    I have to create and udpate BP with comments in the general data. I have no problem to manage this field in creation mode. I only use the segment "E101BAPIAD_REM" from the "CRMXIF_PARTNER_SAVE_M02" Idoc basic type. I fill the following fields: "LANGU, LANGU_ISO, ADR_NOTES".
    However in update mode I don't success to update the value for the field "REMARK". I use the second segment "E101BAPIAD_REX" and i fill only field "ADR_NOTES" with value "X" and "UPDATEFLAG" with value "U".
    I tried several value and several cases but i failed each time. If anybody has already managed this data with IDOC I would be very interesting...
    regards,
    Fabrice Mouyebe.

    Hi Thirumala,
    thank you for your answer but you speak about the field "AddressGUID" of E101BUS_EI_ADDRESSREMARK but I haven't this field at this level. This field is linked to the segment "E101BUS_EI_BUPA_ADDRESS_KEY", isnt'it ?
    Effectively i have certainly a problem with the Address GUID. I have to test it because it doesn't work with only UPDATEFLAG at 'X' and CURRENT_TASK too.
    Thanks,
    fabrice.

Maybe you are looking for