General Health of the Databases
Hi all,
I have inherited a set of databases of abt 600 gb. These databases are of the versions 8.1.x, 9i and 10g. Some of 8x and 9i databases are in the process of upgrading to 10g while others cannot be upgraded for some business reasons.
To add to the complexity of my problem, these databases are spread across the Windows 2000, Solaris 8 and Linux O/S. We have sufficient h/w resources on all the servers of these databases - generally between 1 to 2 gb of RAM, 40 to 80 gb drives - no raids etc. and are appropriately networked.
Now, I am required to give a general health report of these 17 databases to my boss. Is there a way to have a diagnostic report of a database that will point out what all areas need tweaking?
Are there any scripts that can report the total health of a database? Are these scripts usable for all versions of the databases that I have?
Can someone please help me at the earliest?
Thanks in advance for your help.
hi,
OraSnap is the solution.
Though this does not provide the Complete solution, you can use these SELECT statemetns and analyze your DB.
http://www.oracle-books.com/orasnap/
to download this you need to have an yahoo mail account and be member of this group.
Regards,
Bhaskar
Similar Messages
-
Improve battery life, help phone from freezing and improve speed, and general health of the phone.
Make sure you are force closing your applicaitions on a regular basis. Since the phone has multi-tasking your apps and anything you open on your phone is constantly running in the background untill you go in and force close them. This slows the phone down and causes the battery life to deplete greatly. Going in and force closing the apps on regular basis helps alot.
You can do this by going to the home screen and double tap the home button, tap and hold on the first application that pops up untill it starts to shake, then press all the red circles that come up, that is how you force close the apps.
This works on iPhones, iPads, and iPod touches."Since the phone has multi-tasking your apps and anything you open on your phone is constantly running in the background untill you go in and force close them. "
Not true. Very few apps run in the background and those that do are managed by the iphones software.
"You can do this by going to the home screen and double tap the home button, tap and hold on the first application that pops up untill it starts to shake, then press all the red circles that come up, that is how you force close the apps.
All of those apps are not open. Most are not. This is the recently used apps bar. These apps have simply been used recently, they are not open as a rule.
iOS multitasking explained, again | When Will Apple?
Fraser Speirs - Blog - Misconceptions About iOS Multitasking
iOS multi-tasking explained - Apple, Mac, iPhone, iPad, and iPod ... -
Insufficient free space in the database during upgrademodule General checks
we are upgrading SAP R/3 Enterprise 470 110 to ECC6 on Oracle/Windows.
During PREPARE module: General checks the file CHECKS.LOG show the following information:
#====================================================#
Requests and information for module General checks #
#====================================================#
INFO> The following values may be preliminary because of
free space consumption during productive operation and
additional free space requests derived in a later stage.
Conversions of modified tables can require additional space.
Please use the largest free space request printed,
which are the values at the very end of this file.
ERROR> Insufficient free space in the database as follows:
Create TABLESPACE PSAPDIMD with 102 MB
Create TABLESPACE PSAPDIMI with 102 MB
Create TABLESPACE PSAPODSD with 112 MB
Create TABLESPACE PSAPODSI with 112 MB
Create TABLESPACE PSAPFACTD with 102 MB
Create TABLESPACE PSAPFACTI with 102 MB
INFO> To adjust the size of your tablespaces, you may use the commands
in file 'C:\usr\sap\put\log\ORATBSXT.LST' using the 'brspace' utility.
Please copy the file before making changes, as it may be
overwritten in subsequent upgrade phases.
INFO> During the upgrade, the new SAP kernel
will be installed. All files and subdirectories
in directory C:\usr\sap\CTD\SYS\exe\run which are not used
in Release 700 will be removed.
The files from "dbclient.lst" in the kernel directory are kept.
Files and subdirectories can be protected from deletion
if they appear in a file "protect.lst" in the same directory
(each protected name in a separate line).
For security reasons, directory C:\usr\sap\CTD\SYS\exe\run
should be saved in a backup.
INFO> You already installed kernel extensions.
Please unpack the archive(s)
RFC.CAR
after the upgrade has finished.
You can find these archives on the CD "Presentation".
Do n o t unpack the archives now, the software
is only compatible with the new SAP kernel.
INFO> It is possible to upgrade the frontend software before
you start SAPup!
#===========================================================#
PREPARE module General checks finished with status failed #
#===========================================================#
#====================================================
Execution of all selected PREPARE modules finished.
#====================================================
Now, we have the new tablespace layout and as says the upgrade general note: Note 819655 - Add. info.: Upgrade to SAP NW 2004s ABAP ORACLE we do not have to create tablespaces as saied in PREPARE; so I have adjusted tables DDART, TAORA, IAORA: with the entry
DDIM STD Dimension Tables in BW
DFACT STD Facts Table in BW
DODS STD ODS Tables in BW
Then J have repeated the module: GENERAL CHECK but in the file CHECKS.LOG I noted always the same error.
Any HELPS?????
Edited by: Raffaele Pezone on Dec 1, 2009 4:25 PM
Edited by: Raffaele Pezone on Dec 1, 2009 4:34 PMAs mentioned in sap note: Note 541542 - Upgrade phase INIT_CNTRANS: Container inconsistency
we don't have standard layout:
Standard layout: TABART: TAORA-TABSPACE, IAORA-TABSPACE
SSDEF: PSAPES<rel>D, PSAPES<rel>I
SSEXC: PSAPES<rel>D, PSAPES<rel>I
SLDEF: PSAPEL<rel>D, PSAPEL<rel>I
SLEXC: PSAPEL<rel>D, PSAPEL<rel>I
APPL0: PSAPSTABD, PSAPSTABI
USER : PSAPUSER1D, PSAPUSER1I
<...>: PSAP<.....>D, PSAP<.....>I
but
MCOD Layout (new layout)
SSDEF: PSAP<sid><rel>, PSAP<sid><rel>
SSEXC: PSAP<sid><rel>, PSAP<sid><rel>
SLDEF: PSAP<sid><rel>, PSAP<sid><rel>
SLEXC: PSAP<sid><rel>, PSAP<sid><rel>
APPL0: PSAP<sid>USR, PSAP<sid>USR
USER : PSAP<sid>USR, PSAP<sid>USR
<...>: PSAP<sid>, PSAP<sid>
but we don't use Multiple component in one Database. We have only one instance in one DB.
in fact we have following tablespaces:
PSAPSID
PSAPSID620
PSAPSID700
PSAPSIDUSR
PSAPTEMP
PSAPUNDO
SYSAUX
SYSTEM
I have just created PSAPSID700 as PREPARE says. -
So I'm having this problem in Access 2010 & 2013 (I tested it in both) where if I search for something on the bottom of a table (next to where it says the record number), then pull down access and subsequently reopen it, if I were to start typing it
would start typing in the record that the search had found. This has caused me to have some errors in my database which have been proving troublesome and difficult to fix.
If you could tell me how I could resolve this problem, I would greatly appreciate it!
EDIT: I tested some other cases and am having the same issue. If I, instead of minimizing, change the focus away from Access to another program and then move my focus back to Access, the problem appears there as well. In fact, even if I change to another
window in the same instance of Access (say another table) then change back the focus, the problem still appearsHi George,
Thanks for the response. I'm going to include some images and share a sample database with you. This is all being done in 2010 on Windows 7 currently, but is reproducible on 2013. I don't have access to Windows 8 to try it myself.
Step 1: Open up table by double clicking on it
Step 2: Search for something in the table
https://onedrive.live.com/redir?resid=E84A21BD127C022!2874&authkey=!APzefrtzmpvylGw&v=3&ithint=photo%2c.png
Note that where I'm searching is different than where you're searching. I think that's why you couldn't reproduce it. Search for something (in what I'm sharing, something like alpha or 11 or ga or something)
Step 3: Minimize the Access and pull it back up (or change focus away and back in some way or another)
Step 4: Type into what should be the search box. Instead, it types into the field that the search found.
The database with the table I used can be found at https://onedrive.live.com/redir?resid=E84A21BD127C022!2873&authkey=!ABtDlZEyDzT8Jf8&ithint=file%2c.accdb
It is the only table in the database
Thanks again,
Shlomo Miller
I'm having verification problems so I cannot insert a picture. I will update this post when I can. -
Enterprise Manager is not able to connect to the database instance....
Hi all,
Currently i'm facing a big issue here.
I have install the Oracle 10g on Window 2003 SE.
And currently the Enterprise manager is not be able to conenct to the database and my database is still running.With my listener is up.
But from the Enterprise manager's it show that everythg is down.
and when i try to restart it,i ask for os id and password and dbuser and dbpassword.
frm the SQL plus,i can easily startup and shutdown the database.
So i would like to know i can rectify this problem.
please kindly help me.I have post the setting of the databse as below
tnsnames.ora
==========
# Filename......: tnsnames.ora
# Created.......: created by SAP AG, R/3 Rel. >= 6.10
# Name..........:
# Date..........:
# @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#4 $
SDB.WORLD=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = SAP_SOLMAN)
(PORT = 1527)
(CONNECT_DATA =
(SID = SDB)
(GLOBAL_NAME = SDB.WORLD)
sqlnet.ora
========
# sqlnet.ora Network Configuration File: E:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\sqlnet.ora
# Generated by Oracle configuration tools.
# 05.01.06 set to default
#TCP.NODELAY=YES
# 05.01.06 set to 32768
# 05.01.06 unsorported parameter now
#NAME.DEFAULT_ZONE = WORLD
# 05.01.06 set the default to 10
# Filename......: sqlnet.ora
# Created.......: created by SAP AG, R/3 Rel. >= 6.10
# Name..........:
# Date..........:
# @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/SQLNET.ORA#4 $
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT, HOSTNAME, LDAP)
NAMES.DEFAULT_DOMAIN = WORLD
DEFAULT_SDU_SIZE = 32768
SQLNET.EXPIRE_TIME = 10
Listener.ora
=========
# Filename......: listener.ora
# Created.......: created by SAP AG, R/3 Rel. >= 6.10
# Name..........:
# Date..........:
# @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = SDB.WORLD)
(ADDRESS=
(PROTOCOL = IPC)
(KEY = SDB)
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = SAP_SOLMAN)
(PORT = 1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = SDB)
(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
Listener status
===========
LSNRCTL> status
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=SDB.WORLD))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 15-AUG-2006 15:14:48
Uptime 0 days 2 hr. 43 min. 31 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File E:\oracle\product\10.2.0\db_1\network\admin\listener.o
ra
Listener Log File E:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\SDB.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\SDBipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SAP_solman)(PORT=1527)))
Services Summary...
Service "SDB" has 1 instance(s).
Instance "SDB", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
emoms.log
========
2006-08-15 18:03:20,562 [HttpRequestHandler-2254042] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = Io exception: The Network Adapter could not establish the connection
2006-08-15 18:03:21,547 [HttpRequestHandler-2254042] WARN jdbc.ConnectionCache _getConnection.303 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
2006-08-15 18:03:21,547 [HttpRequestHandler-2254042] WARN jdbc.ConnectionCache _getConnection.306 - Io exception: The Network Adapter could not establish the connection
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:111)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:145)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:254)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:386)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:493)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:164)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:767)
at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:324)
at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:114)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getNewPoolOrXAConnection(OracleConnectionCacheImpl.java:694)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getPooledConnection(OracleConnectionCacheImpl.java:540)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:346)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:324)
at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:296)
at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:423)
at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:156)
at oracle.sysman.emSDK.svc.conn.ConnectionService.getPrivateConnection(ConnectionService.java:605)
at oracle.sysman.emdrep.receiver.OMSHandshake.getParameterFromDB(OMSHandshake.java:387)
at oracle.sysman.emdrep.receiver.OMSHandshake.getMaxAgentCompatVer(OMSHandshake.java:369)
at oracle.sysman.emdrep.receiver.OMSHandshake.handshake(OMSHandshake.java:794)
at oracle.sysman.emdrep.receiver.OMSHandshake.handshake(OMSHandshake.java:648)
at oracle.sysman.emdrep.receiver.FxferRecv.doGet(FxferRecv.java:658)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:239)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
2006-08-15 18:03:22,531 [HttpRequestHandler-2254042] ERROR eml.OMSHandshake getParameterFromDB.402 - Io exception: The Network Adapter could not establish the connection
2006-08-15 18:03:22,531 [HttpRequestHandler-2254042] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://SAP_solman:3938/emd/main)(ERROR = INTERNAL_ERROR)
2006-08-15 18:03:35,547 [HttpRequestHandler-9249408] WARN jdbc.ConnectionCache _getConnection.303 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
2006-08-15 18:03:35,547 [HttpRequestHandler-9249408] WARN jdbc.ConnectionCache _getConnection.306 - Io exception: The Network Adapter could not establish the connection
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:111)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:145)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:254)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:386)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:493)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:164)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:767)
at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:324)
at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:114)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getNewPoolOrXAConnection(OracleConnectionCacheImpl.java:694)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getPooledConnection(OracleConnectionCacheImpl.java:540)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:346)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:324)
at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:296)
at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:423)
at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:156)
at oracle.sysman.emSDK.svc.conn.ConnectionService.getPrivateConnection(ConnectionService.java:605)
at oracle.sysman.emSDK.svc.conn.ConnectionService.getRepositoryVersionAndMode(ConnectionService.java:368)
at oracle.sysman.emSDK.svc.conn.ConnectionService.verifyRepositoryEx(ConnectionService.java:395)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:144)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
2006-08-15 18:03:36,531 [HttpRequestHandler-9249408] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = Io exception: The Network Adapter could not establish the connection
2006-08-15 18:03:36,531 [EMUI_18_03_36_/console/aboutApplication] ERROR em.console doGet.311 - java.lang.IllegalStateException: Response has already been committed
java.lang.IllegalStateException: Response has already been committed
at com.evermind.server.http.EvermindHttpServletResponse.resetBuffer(EvermindHttpServletResponse.java:1901)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:211)
at oracle.sysman.emSDK.svlt.PageHandler.render(PageHandler.java:773)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:396)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:688)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:291)
at oracle.sysman.eml.app.Console.doGet(Console.java:135)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:101)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:123)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:239)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
OracleDBConsoleSDBsrvc.log
======================
-------------- [OracleDBConsoleSDB] ------------
EMDROOT=E:\oracle\product\10.2.0\db_1
ORACLE_HOME=E:\oracle\product\10.2.0\db_1
EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
08/09/06 15:11:59 Start pending...
08/09/06 15:11:59 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
08/09/06 15:12:04 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
08/09/06 15:12:04 Tracking process launch...
08/09/06 15:12:41 Received exitCode 3 from emctl istatus
08/09/06 15:12:41 dbconsole started
08/11/06 08:46:03 Recieved ServCtrlHdlr command, 5
08/11/06 08:46:03 Stopping dbconsole
08/11/06 08:46:03 Launching stop EMD process...
08/11/06 08:46:03 Waiting for stop EMD process to exit. numRetries=74
08/11/06 08:46:06 Stop process has exited with exitCode: 0
08/11/06 08:46:06 Waiting for emwd process to exit. numRetries=74
08/11/06 08:46:06 Watchdog process exited with exit code 15
08/11/06 08:46:06 Signal Shutdown event.
08/11/06 08:46:06 Shutdown thread exited.
08/11/06 08:46:06 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
-------------- [OracleDBConsoleSDB] ------------
EMDROOT=E:\oracle\product\10.2.0\db_1
ORACLE_HOME=E:\oracle\product\10.2.0\db_1
EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
08/11/06 08:45:17 Start pending...
08/11/06 08:45:17 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
08/11/06 08:45:26 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
08/11/06 08:45:26 Tracking process launch...
08/11/06 08:46:11 Received exitCode 3 from emctl istatus
08/11/06 08:46:11 dbconsole started
08/11/06 08:48:58 Recieved ServCtrlHdlr command, 5
08/11/06 08:48:58 Stopping dbconsole
08/11/06 08:48:58 Launching stop EMD process...
08/11/06 08:48:58 Waiting for stop EMD process to exit. numRetries=74
08/11/06 08:49:02 Stop process has exited with exitCode: 0
08/11/06 08:49:02 Waiting for emwd process to exit. numRetries=74
08/11/06 08:49:02 Watchdog process exited with exit code 15
08/11/06 08:49:02 Signal Shutdown event.
08/11/06 08:49:02 Shutdown thread exited.
08/11/06 08:49:02 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
-------------- [OracleDBConsoleSDB] ------------
EMDROOT=E:\oracle\product\10.2.0\db_1
ORACLE_HOME=E:\oracle\product\10.2.0\db_1
EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
08/11/06 08:53:20 Start pending...
08/11/06 08:53:20 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
08/11/06 08:53:29 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
08/11/06 08:53:29 Tracking process launch...
08/11/06 08:54:14 Received exitCode 3 from emctl istatus
08/11/06 08:54:14 dbconsole started
08/11/06 11:37:30 Recieved ServCtrlHdlr command, 5
08/11/06 11:37:30 Stopping dbconsole
08/11/06 11:37:30 Launching stop EMD process...
08/11/06 11:37:30 Waiting for stop EMD process to exit. numRetries=74
08/11/06 11:37:34 Stop process has exited with exitCode: 0
08/11/06 11:37:34 Waiting for emwd process to exit. numRetries=74
08/11/06 11:37:34 Watchdog process exited with exit code 15
08/11/06 11:37:34 Signal Shutdown event.
08/11/06 11:37:34 Shutdown thread exited.
08/11/06 11:37:34 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
-------------- [OracleDBConsoleSDB] ------------
EMDROOT=E:\oracle\product\10.2.0\db_1
ORACLE_HOME=E:\oracle\product\10.2.0\db_1
EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
08/11/06 11:36:48 Start pending...
08/11/06 11:36:48 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
08/11/06 11:36:56 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
08/11/06 11:36:56 Tracking process launch...
08/11/06 11:37:41 Received exitCode 3 from emctl istatus
08/11/06 11:37:41 dbconsole started
08/15/06 09:31:52 Recieved ServCtrlHdlr command, 5
08/15/06 09:31:52 Stopping dbconsole
08/15/06 09:31:52 Launching stop EMD process...
08/15/06 09:31:52 Waiting for stop EMD process to exit. numRetries=74
08/15/06 09:31:56 Stop process has exited with exitCode: 0
08/15/06 09:31:56 Waiting for emwd process to exit. numRetries=74
08/15/06 09:31:56 Watchdog process exited with exit code 15
08/15/06 09:31:56 Signal Shutdown event.
08/15/06 09:31:56 Shutdown thread exited.
08/15/06 09:31:56 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
-------------- [OracleDBConsoleSDB] ------------
EMDROOT=E:\oracle\product\10.2.0\db_1
ORACLE_HOME=E:\oracle\product\10.2.0\db_1
EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
08/15/06 09:31:06 Start pending...
08/15/06 09:31:06 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
08/15/06 09:31:14 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
08/15/06 09:31:14 Tracking process launch...
08/15/06 09:31:49 Did not hear back from emctl istatus.
08/15/06 09:31:49 Waiting a further 5 secs...
08/15/06 09:31:51 Received exitCode 3 from emctl istatus
08/15/06 09:31:51 dbconsole started
08/15/06 15:15:31 Recieved ServCtrlHdlr command, 5
08/15/06 15:15:31 Stopping dbconsole
08/15/06 15:15:31 Launching stop EMD process...
08/15/06 15:15:31 Waiting for stop EMD process to exit. numRetries=74
08/15/06 15:15:34 Stop process has exited with exitCode: 0
08/15/06 15:15:34 Waiting for emwd process to exit. numRetries=74
08/15/06 15:15:34 Watchdog process exited with exit code 15
08/15/06 15:15:34 Signal Shutdown event.
08/15/06 15:15:34 Shutdown thread exited.
08/15/06 15:15:34 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
-------------- [OracleDBConsoleSDB] ------------
EMDROOT=E:\oracle\product\10.2.0\db_1
ORACLE_HOME=E:\oracle\product\10.2.0\db_1
EMDSTATE=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
08/15/06 15:14:46 Start pending...
08/15/06 15:14:46 Verifying dbconsole is not started already. Command line "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
08/15/06 15:14:54 dbconsole launch commandline is "E:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
08/15/06 15:14:54 Tracking process launch...
08/15/06 15:15:29 Did not hear back from emctl istatus.
08/15/06 15:15:29 Waiting a further 5 secs...
08/15/06 15:15:32 Received exitCode 3 from emctl istatus
08/15/06 15:15:32 dbconsole started
Command prompt for emctls status
=========================
E:\oracle\product\10.2.0\db_1\BIN>emctl status
Environment variable ORACLE_SID not defined. Please define it.
emd.properties
===========
# perl executable directory
perlBin=E:\oracle\product\10.2.0\db_1\perl\5.8.3\bin\MSWin32-x86-multi-thread
# script directory
scriptsDir=E:\oracle\product\10.2.0\db_1/sysman/admin/scripts
# emd Root directory(read-only location). Metrics should not create files
# under this directory
emdRoot=E:\oracle\product\10.2.0\db_1
# agent Root directory(writeable).
# Use this property to base any temporary file creation.
agentStateDir=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB
# Chronos root directory
chronosRoot=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/emd/chronos
# OMS Upload URL
# if there is no receiving OMS or if you wish to disable the UploadManager
# please set this value to empty or comment out below line
REPOSITORY_URL=http://SAP_solman:5500/em/upload/
# Proxy settings used for fetchlets. not applicable for uploader.
#proxyHost=www-proxy.us.oracle.com
#proxyPort=80
#dontProxyFor=.us.oracle.com
# If it is necessary to go through an http proxy server to get to the
# repository, uncomment the following two lines
#REPOSITORY_PROXYHOST=
#REPOSITORY_PROXYPORT=
#REPOSITORY_PROXYREALM=%EM_REPOS_PROXYREALM%
#REPOSITORY_PROXYUSER=%EM_REPOS_PROXYUSER%
#REPOSITORY_PROXYPWD=%EM_REPOS_PROXYPWD%
# This string is used by the agent to connect to remote targets
# ***IMPORTANT*** Do not change the contents of this setting. Only the
# install should modify this value.
agentSeed=1329576760
# This string is used by the agent to determine which algorithm to use for encrypted data
# The string value will be same as the release version
agentVersion=10.1.0.4.0
# How long, in minutes, collector will wait until next load.
UploadInterval=5
# If an upload fails, we want to backoff by UploadFailBackoff
# percentage more each time for each successive upload failure
# e.g. if we start the retry at 1 minute. If we fail in our next
# upload attempt, we try again 1minute 12 seconds later etc.
UploadFailBackoffPct= 20
# Maximum amount of time, in seconds, upload will wait for response from
# repository before timing out.
# 0 means infinite.
UploadTimeout=1800
# Timeout for upload a file, HealthMonitor will abort the EMD process if
# UploadManager does not finish uploading one file within this time
# Unit is minite, the default value is 1 hour ( 15 Min)
#UploadMaxTime=15
# How big the file the collector will upload (in KB)
# the actual file size could be slightly bigger.
# This is only a guidance.
UploadFileSize=2048
# The maximum number of megabytes(MB) the upload manager will support in the
# upload directory before temporarily being disabled
UploadMaxBytesXML=50
# The maximum number of files the upload manager will support in the
# upload directory before temporarily being disabled
UploadMaxNumberXML=5000
# The maximum amount (%) of disk space that can be used on the EMD filesystem
# before the following is disabled:
# - Collection of data (upload manager)
# - Logging and tracing
UploadMaxDiskUsedPct=98
# The amount (%) of disk space that can be used on the EMD filesystem
# before the following is re-enabled after being disabled previously:
# - Collection of data (upload manager)
# - Logging and tracing
UploadMaxDiskUsedPctFloor=95
# Time out for the Agent to think that the access to the database could be
# hung. The Agent would not allow more threads to go and hang with a database
# if any one access to the database does not return within DbHangTimeout
# seconds.
# The more the timeout more the possibility of allowing more threads
# to be hung in the EMD with a bad database.it is specified in seconds.
#DbHangTimeout=200
# The script to run if disk space usage exceeds parameters or if certain other
# error conditions occur.
#emdFailureScript=emdfail.command
# The location of the file that contains the root certificate.
emdRootCertLoc=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/config/b64LocalCertificate.txt
internetCertLoc=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/config/b64InternetCertificate.txt
# The download URL for the EMD Oracle Wallet and its local file location.
# Note: Ensure that this URL references a valid port number at which the
# console is available on http
emdWalletSrcUrl=http://SAP_solman:5500/em/wallets/emd
emdWalletDest=E:/oracle/product/10.2.0/db_1/SAP_solman_SDB/sysman/config/server
# The email address for out-of-band notifications
emd_email_address=
emd_email_gateway=
# The return email address for out-of-band notifications
emd_from_email_address=
# EMD main servlet URL
EMD_URL=http://SAP_solman:3938/emd/main
# Whether the EMD should listen on all NICs on the current host (the default)
# or just the NIC associated with the hostname in EMD_URL
AgentListenOnAllNICs=TRUE
# This parameter indicates the thread model to use. uncomment one of the
# following ThreadPoolModel line to indicate the model, agent need to use.
# SMALL if number of targets is less than 11.
# MEDIUM if number of targets is from 11 to 50.
# LARGE if number of targets is greater than 50.
# This parameter can be overriden by 'MaxThreads' which indicates the maximum
# number of threads that CEMD can have running at any point of time. User can
# mostly use the other parameter ThreadPoolModel to indicate what model for the
# agent to use.
# ThreadPoolModel = SMALL
# ThreadPoolModel = MEDIUM
# ThreadPoolModel = LARGE
# This parameter indicates the stack size, threads have to be created with.
# we can set it to 0 to use the OS default value.
# In some version of solaris(such as 2.9 ) specify a stack size may cause Java Hotspot warning
# when JVM is used.
NormalThreadStackSize=0
#Signals that users want to ignore.
#It can be one or combination of SIGTERM, SIGINT
# The signals can listed with ',' as delimiter.
#IgnoreSignals=
# This property is NO LONGER USED for host config collection (instead, hostConfigClasspath is used).
# If noone else uses it, it can be removed.
ouiLoc=E:\oracle\product\10.2.0\db_1/oui
# Classpath for host config collection
# VERY IMPORTANT NOTE: If you change the host config classpath entries in this section, you HAVE
# to change the HOST_CONFIG_TEST_CLASSPATH entry in the utl/emdwqaenv file too.
# NOTE: if the location of emd_java.jar and/or log4j-core.jar is changed
# make sure that appropriate changes are also made
# to the CLASSPATH variable in this file if necessary
# PORTING NOTE: Check OUI-required jar files for OUI APIs to work. They could be different on your platform.
# Also, our version of xmlparserv2.jar must be compatible with the one OUI expects (both OUI and ECM use XML parser).
hostConfigClasspath=E:\oracle\product\10.2.0\db_1/oui/jlib/xmlparserv2.jar;E:\oracle\product\10.2.0\db_1/oui/jlib/OraInstaller.jar;E:\oracle\product\10.2.0\db_1/oui/jlib/srvm.jar;E:\oracle\product\10.2.0\db_1/oui/jlib/share.jar;E:\oracle\product\10.2.0\db_1/sysman/jlib/emd_java.jar;E:\oracle\product\10.2.0\db_1/sysman/jlib/log4j-core.jar
# JAVA HOME required for JavaExt metric calls
JAVA_HOME=E:\oracle\product\10.2.0\db_1/jdk/jre
# CLASSPATH required for JavaExt metric calls
CLASSPATH=E:\oracle\product\10.2.0\db_1/sysman/jlib/emd_java.jar;E:\oracle\product\10.2.0\db_1/opmn/lib/ons.jar;E:\oracle\product\10.2.0\db_1/lib/xmlparserv2.jar;E:\oracle\product\10.2.0\db_1/sysman/jlib/log4j-core.jar;E:\oracle\product\10.2.0\db_1/oc4j/j2ee/home/lib/http_client.jar;E:\oracle\product\10.2.0\db_1/lib/dms.jar;E:\oracle\product\10.2.0\db_1/lib/dmsEmd.jar;E:\oracle\product\10.2.0\db_1/jlib/share.jar;E:\oracle\product\10.2.0\db_1/jdbc/lib/ojdbc14dms.jar;E:\oracle\product\10.2.0\db_1/jlib/jssl-1_1.jar;E:\oracle\product\10.2.0\db_1/jlib/javax-ssl-1_1.jar;E:\oracle\product\10.2.0\db_1/jlib/ojmisc.jar;E:\oracle\product\10.2.0\db_1/lib/em_test.jar;E:\oracle\product\10.2.0\db_1/jlib/ojmisc.jar;E:\oracle\product\10.2.0\db_1/jlib/repository.jar;E:\oracle\product\10.2.0\db_1/opmn/lib/optic.jar
# this is the java option
#JAVA_OPTIONS=-Xmx128m
# These are the optional Java flags for the in-process Java
# Native Interface (JNI)
agentJavaDefines=-Doracle.dms.refresh.wait.time=1000 -DUrlTiming.UseJSSE=true
# When set to true, the emd.log and emd.trc file will be appended by a pid
# For example:
# emd_15789.log
# emd_15789.trc
# By default, it is not set for regression test purpose.
# After installed, please uncomment this line because when EMD is restarted,
# previous log information will be lost if not set to true.
#LogFileWithPID=true
# Default log file maximum size before rolling in Kilobytes
LogFileMaxSize=4096
# Maximum number of log file roll files to maintain before deletion
LogFileMaxRolls=4
# Default trace file maximum size before rolling in Kilobytes
TrcFileMaxSize=4096
# Maximum number of trace file roll files to maintain before deletion
TrcFileMaxRolls=4
# To enable the metric browser, uncomment the following line
# This is a reloadable parameter
#enableMetricBrowser=true
# To disable Remote operations (non-reachable agent) uncomment the following
# line:
#disableRemoteOperations=true
# add an additional admin path from which the agent will read additional
# target metadata. The specified path should have the mandatory 4 directories
# under it. 1. metadata 2. scripts 3. default_collection 4. discover
#altAdminPath=<additional admin path>
# The health monitor executes callbacks in a separate thread. if for some
# reason the threads spawned from health monitor to execute callbacks are
# hung, the agent could run out of resource and freeze.
# so when the current thread count spawned from the Health monitor reaches
# this limit, the agent is bounced. the default is set to 5.
#MaxHealthMonitorThreads=5
# dynamicPropsComputeTimeout default to 30s
dynamicPropsComputeTimeout=60
# emagent perl tracing levels
# supported levels: DEBUG, INFO, WARN, ERROR
# default level is ERROR
EMAGENT_PERL_TRACE_LEVEL=ERROR
# other optional parameters for perl tracing
# EMAGENT_PERL_TRACE_DIR default to $ORACLE_HOME/sysman/log
#EMAGENT_PERL_TRACE_DIR=
# EMAGENT_PERL_TRACE_FILESIZE default to 5M
#EMAGENT_PERL_TRACE_FILESIZE=5
# this section define the logging level for each component,
# it is "reloadable", you can change the level at runtime to reset
# the logging level, but if you remove the line, it will not be
# changed.
tracelevel.main=WARN
tracelevel.emSDK.xml=WARN
tracelevel.emSDK.utl=WARN
tracelevel.ResMonitor=WARN
tracelevel.Dispatcher=WARN
tracelevel.ThreadPool=WARN
tracelevel.pingManager=WARN
tracelevel.collector=WARN
tracelevel.http=WARN
tracelevel.ssl=WARN
tracelevel.ssl.io=WARN
tracelevel.blackouts=WARN
tracelevel.upload=WARN
tracelevel.command=WARN
tracelevel.reload=WARN
tracelevel.scheduler=WARN
tracelevel.Authentication=WARN
tracelevel.metadata=WARN
tracelevel.targets=WARN
tracelevel.TargetManager=WARN
tracelevel.engine=WARN
tracelevel.javaproc=WARN
tracelevel.vpxoci=WARN
tracelevel.javavm=WARN
tracelevel.fetchlets=WARN
tracelevel.fetchlets.os=WARN
tracelevel.fetchlets.osline=WARN
tracelevel.fetchlets.oslinetok=WARN
tracelevel.fetchlets.UDM=WARN
tracelevel.fetchlets.sql=WARN
tracelevel.fetchlets.url=WARN
tracelevel.fetchlets.urllines=WARN
tracelevel.fetchlets.urllinetoken=WARN
tracelevel.fetchlets.URLTiming=WARN
tracelevel.fetchlets.propEcho=WARN
tracelevel.fetchlets.readFromFile=WARN
tracelevel.fetchlets.readMultFromFile=WARN
tracelevel.fetchlets.throwable=WARN
tracelevel.fetchlets.resourceGrab=WARN
tracelevel.fetchlets.emSDK=WARN
# The following three properties are for HTTP timeout
# Timeout value for reading Http primary header, default is 30 seconds.
httpTimeoutPrimaryHeader=30
# Timeout value for reading http secondary headers, default is 30 seconds
httpTimeoutSecondaryHeaders=30
# Timeout value for reading http body, default is 60 seconds.
httpTimeoutBody=60
omsRecvDir=E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\sysman\recv
agentTZRegion=+08:00
And i would like to know how to set up the environment variable for Oracle_HOME and ORACLE_SID.
Please kindly assist me on this.Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh -
Question about finding whether a reference number is NOT in the database?
Hello,
I use the following code to test whether the reference number is in the database
<ul><li>CURSOR cur_yellow</li></ul>
<ul><li>IS SELECT</li></ul>
<ul><li>REFERENCE_NO,</li></ul>
<ul><li>COMPANY_NAME</li></ul>
<ul><li>FROM CONSULTANTS;</li></ul>
<ul><li>rec_yellow cur_yellow%ROWTYPE;</li></ul>
<ul><li>BEGIN</li></ul>
<ul><li> OPEN cur_yellow;</li></ul>
<ul><li> LOOP</li></ul>
<ul><li> FETCH cur_yellow INTO rec_yellow;</li></ul>
<ul><li> EXIT WHEN cur_yellow%NOTFOUND;</li></ul>
<ul><li> IF ref_no = rec_yellow.REFERENCE_NO</li></ul>
<ul><li> THEN</li></ul>
HTP.print ('<ul><li><span class="style5">The information concerning the consultant selected has been deleted from the database.</span></li></ul>');
<ul><li> exp := 1; -- used to make code bullet proof</li></ul>
<ul><li> END IF;</li></ul>
<ul><li> END LOOP;</li></ul>
<ul><li> CLOSE cur_yellow;</li></ul>
Do you have any ideas for how to write code to test whether the reference number is NOT in the database.
Thanks
DougHallo,
in general, yes, but I think , it will be better without cursor:
declare
v_dummy number;
BEGIN
EXECUTE IMMEDIATE 'select 1 from dual where
exists (select 1 from user_indexes where index_name = : ind_name) USING ''DOUGLASMYINDEX'
INTO v_1;
-- something
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
END;
Is it necessary to perform it in dynamic SQL ?
declare
v_dummy number;
BEGIN
select 1 into v_1 from dual where
exists (select 1 from user_indexes where index_name = ''DOUGLASMYINDEX''')
INTO v_1;
-- something
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
END;
Regards
Dmytro Dekhtyaryuk -
Adding Data to the database for SAP Transactions
Hi
I'm new to the whole ABAP. I would like to enquire about adding transaction data in SAP through ABAP but it must be immediate.
I know that one can use a BAPI to add data and can rollback if any problems occur.
But if no BAPI exists how does one write code to add a document to the SAP database but with everything SAP transaction requires like the BAPI. What is the process and how???
So let say I wanted to do FB01 which is SAP FI document and must be immediate. There is a BAPI that exists for it but if there was not one how would I do this???
I know one can also use BDC but that creates a batch and then needs to be executed in SM35, I want a way to add data for two or three SAP transactions, if any problems occur with any of the steps rollback everything else commit everything to the database.
Any simple detail examples (code) that satisfy the above will be greatly appreciated and REWARDED.
Thanks in advanceLuis,
i have a code exactly same BDC for FB01.
refer:
REPORT z_etching_fb01
NO STANDARD PAGE HEADING LINE-SIZE 255.
*etching invoice load
INCLUDE bdcrecx1.
TYPE-POOLS: truxs , slis.
*PARAMETERS: dataset(132) LOWER CASE DEFAULT
* 'c:\temp\etchingload.txt'.
PARAMETER: pfile LIKE rlgrap-filename." OBLIGATORY.
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-001.
PARAMETER: p_kunnr LIKE kna1-kunnr OBLIGATORY, "kna1-kunnr
p_bukrs LIKE bseg-bukrs,
p_mwskz LIKE t007a-mwskz OBLIGATORY,"t007a-mwskz
p_prctr LIKE cepc-prctr OBLIGATORY,"cepc-prctr
* p_newko LIKE ska1-saknr OBLIGATORY DEFAULT 41000000,"
p_budat LIKE bkpf-budat OBLIGATORY ,
p_hkont LIKE bseg-hkont OBLIGATORY DEFAULT 41000000 ,
p_waers TYPE waers OBLIGATORY DEFAULT 'GBP'."tcurr-waers
SELECTION-SCREEN END OF BLOCK a.
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-002.
PARAMETER : report AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b.
*** DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
* If it is nessesary to change the data section use the rules:
* 1.) Each definition of a field exists of two lines
* 2.) The first line shows exactly the comment
* '* data element: ' followed with the data element
* which describes the field.
* If you don't have a data element use the
* comment without a data element name
* 3.) The second line shows the fieldname of the
* structure, the fieldname must consist of
* a fieldname and optional the character '_' and
* three numbers and the field length in brackets
* 4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
* ALV *
DATA: it_fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat LIKE LINE OF it_fieldcat,
it_top_of_page TYPE slis_t_listheader,
ls_layout TYPE slis_layout_alv,
gt_events TYPE slis_t_event.
DATA: it_raw TYPE truxs_t_text_data.
DATA: BEGIN OF record,
* data element: BLDAT
bldat_001(010), "Invoice Date
* data element: BLART
blart_002(002), " Doc Type DR or DG if credit
* data element: BUKRS
bukrs_003(004), " Company Code
* data element: BUDAT
budat_004(010), "Posting Date
* data element: MONAT
monat_005(002), "period"
* data element: WAERS
waers_006(005), "Currency
* data element: XBLNR1
xblnr_007(016), "Invoice Number
* data element: BKTXT
bktxt_008(025), "PO number
* data element: SAEOBJART
docid_009(010),
* data element: NEWBS
newbs_010(002), "posting Key
* data element: NEWKO
newko_011(017), "Customer number or GL account
* data element: WRBTR
wrbtr_012(016), "Amount
* data element: DZTERM
zterm_013(004),
* data element: DZBD1T
zbd1t_014(003),
* data element: DZFBDT
zfbdt_015(010),
* data element: DZUONR
zuonr_016(018), "Invoice Number
* data element: SGTXT
sgtxt_017(050), " PO number
* data element: NEWBS
newbs_018(002),
* data element: NEWKO
newko_019(017), "GL Account
* data element: WRBTR
wrbtr_020(016), "Amount
* data element: MWSKZ
mwskz_021(002), "Tax
* data element: DZUONR
zuonr_022(018), "Invoice Number
* data element: SGTXT
sgtxt_023(050), "PO Number
* data element: PRCTR
prctr_024(010), "Profit Center
* data element: WRBTR
wrbtr_025(016), " Amount
* data element: MWSKZ
mwskz_026(002), "Tax
* data element: DZUONR
zuonr_027(018), "Invoice Number
* data element: SGTXT
sgtxt_028(050), "PO Number
* data element: FMORE
fmore_029(001),
* data element: PRCTR
prctr_030(010), "Pr Center
* data element: FWSTE
fwste_01_031(016),
END OF record.
DATA: BEGIN OF it_excel OCCURS 0,
* data element: XBLNR1
xblnr_007(016), "Invoice Number
* data element: BLDAT
bldat_001(010), "Invoice Date
* data element: WRBTR
wrbtr_012(016), "Amount
* data element: WRBTR
wrbtr_025(016), " Tax Amount
* data element: WRBTR
wrbtr_020(016), "Gross Amount
* data element: BLART
blart_002(002), " No of units
* data element: MONAT
monat_005(002), "No of units second test"
* data element: BKTXT
bktxt_008(025), "PO number
* data element: SGTXT
sgtxt_017(050), " PO number
* data element: BUKRS
bukrs_003(004), " Company Code
* data element: BUDAT
budat_004(010), "Posting Date
* budat_004 TYPE string, "Posting Date
* data element: WAERS
waers_006(005), "Currency*
* data element: NEWKO
newko_011(017), "Customer number or GL account
* data element : kunnr
kunnr_019(010), " customer
mwskz(002),
prctr(010),
date(002),
month(002),
** data element: BKTXT
* bktxt_008(025), "PO number
** data element: SAEOBJART
* docid_009(010),
** data element: NEWBS
* newbs_010(002), "posting Key
** data element: DZTERM
* zterm_013(004),
** data element: DZBD1T
* zbd1t_014(003),
** data element: DZFBDT
* zfbdt_015(010),
** data element: DZUONR
* zuonr_016(018), "Invoice Number
** data element: NEWBS
* newbs_018(002),
** data element: NEWKO
* newko_019(017), "GL Account
** data element: MWSKZ
* mwskz_021(002), "Tax
** data element: DZUONR
* zuonr_022(018), "Invoice Number
** data element: SGTXT
* sgtxt_023(050), "PO Number
** data element: PRCTR
* prctr_024(010), "Profit Center
** data element: MWSKZ
* mwskz_026(002), "Tax
** data element: DZUONR
* zuonr_027(018), "Invoice Number
** data element: SGTXT
* sgtxt_028(050), "PO Number
** data element: FMORE
* fmore_029(001),
** data element: PRCTR
* prctr_030(010), "Pr Center
** data element: FWSTE
* fwste_01_031(016),
END OF it_excel.
DATA : BEGIN OF it_bkpf OCCURS 0,
belnr LIKE bkpf-belnr,
budat LIKE bkpf-budat,
bldat LIKE bkpf-bldat,
xblnr LIKE bkpf-xblnr,
bktxt LIKE bkpf-bktxt,
total LIKE bseg-dmbtr,
numdocs TYPE p DECIMALS 0,
END OF it_bkpf,
BEGIN OF it_bseg OCCURS 0,
belnr LIKE bseg-belnr,
dmbtr LIKE bseg-dmbtr,
mwsts LIKE bseg-mwsts,
pswsl LIKE bseg-pswsl,
END OF it_bseg,
BEGIN OF it_final OCCURS 0,
belnr LIKE bkpf-belnr,
budat LIKE bkpf-budat,
bldat LIKE bkpf-bldat,
xblnr LIKE bkpf-xblnr,
bktxt LIKE bkpf-bktxt,
dmbtr LIKE bseg-dmbtr,
mwsts LIKE bseg-mwsts,
pswsl LIKE bseg-pswsl,
END OF it_final.
***** End generated data section ***
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pfile.
PERFORM sub_browse_file. "Get file name
START-OF-SELECTION.
PERFORM sub_data_load. " Transfer excel into internal table.
PERFORM sub_calc_excel.
IF report = 'X'.
* PERFORM data_selection.
* PERFORM data_move.
*********************************GET ALV DATA
PERFORM alv_get_data.
*********************************ALV GRID DATA
PERFORM alv_grid.
ENDIF.
*if report = ''.
* PERFORM write.
* PERFORM open_dataset USING dataset.
PERFORM open_group.
* DO.
* READ DATASET dataset INTO record.
LOOP AT it_excel.
* IF sy-subrc <> 0. EXIT. ENDIF.
PERFORM bdc_dynpro USING 'SAPMF05A' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF05A-NEWKO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BKPF-BLDAT'
it_excel-bldat_001.
PERFORM bdc_field USING 'BKPF-BLART'
'DR'." record-blart_002.
PERFORM bdc_field USING 'BKPF-BUKRS'
it_excel-bukrs_003.
PERFORM bdc_field USING 'BKPF-BUDAT'
it_excel-budat_004.
PERFORM bdc_field USING 'BKPF-MONAT'
'3'. "record-monat_005.
PERFORM bdc_field USING 'BKPF-WAERS'
it_excel-waers_006.
PERFORM bdc_field USING 'BKPF-XBLNR'
it_excel-xblnr_007.
PERFORM bdc_field USING 'BKPF-BKTXT'
it_excel-bktxt_008.
PERFORM bdc_field USING 'FS006-DOCID'
'*' ."record-docid_009.
PERFORM bdc_field USING 'RF05A-NEWBS'
'01'." record-newbs_010.
PERFORM bdc_field USING 'RF05A-NEWKO'
it_excel-kunnr_019 .
PERFORM bdc_dynpro USING 'SAPMF05A' '0301'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF05A-NEWKO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BSEG-WRBTR'
it_excel-wrbtr_020." it_excel-wrbtr_012.
PERFORM bdc_field USING 'BSEG-ZTERM'
'NT30' ." record-zterm_013.
PERFORM bdc_field USING 'BSEG-ZBD1T'
'30'."record-zbd1t_014.
PERFORM bdc_field USING 'BSEG-ZFBDT'
it_excel-bldat_001."record-zfbdt_015.
PERFORM bdc_field USING 'BSEG-ZUONR'
it_excel-xblnr_007."record-zuonr_016.
PERFORM bdc_field USING 'BSEG-SGTXT'
it_excel-sgtxt_017.
PERFORM bdc_field USING 'RF05A-NEWBS'
'50'." record-newbs_018.
PERFORM bdc_field USING 'RF05A-NEWKO'
it_excel-newko_011." record-newko_019."Gl account
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'BDC_CURSOR'
'BSEG-SGTXT'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BSEG-WRBTR'
it_excel-wrbtr_012."changes from 12 to 20
PERFORM bdc_field USING 'BSEG-MWSKZ'
it_excel-mwskz." record-mwskz_021.
PERFORM bdc_field USING 'BSEG-ZUONR'
it_excel-xblnr_007." record-zuonr_022.
PERFORM bdc_field USING 'BSEG-SGTXT'
it_excel-sgtxt_017." record-sgtxt_023.
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_CURSOR'
'COBL-PRCTR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'COBL-PRCTR'
it_excel-prctr ." record-prctr_024.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'BDC_CURSOR'
'BSEG-WRBTR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=STER'.
PERFORM bdc_field USING 'BSEG-WRBTR'
it_excel-wrbtr_012." it_excel-wrbtr_025.
PERFORM bdc_field USING 'BSEG-MWSKZ'
it_excel-mwskz.
PERFORM bdc_field USING 'BSEG-ZUONR'
it_excel-xblnr_007." record-zuonr_027.
PERFORM bdc_field USING 'BSEG-SGTXT'
it_excel-sgtxt_017." record-sgtxt_028.
PERFORM bdc_field USING 'DKACB-FMORE'
'X' ."record-fmore_029.
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_CURSOR'
'COBL-PARGB'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'COBL-PRCTR'
it_excel-prctr." record-prctr_030.
PERFORM bdc_dynpro USING 'SAPLTAX1' '0300'.
PERFORM bdc_field USING 'BDC_CURSOR'
'BSET-FWSTE(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=GOBU'.
PERFORM bdc_field USING 'BSET-FWSTE(01)'
it_excel-wrbtr_025." record-fwste_01_031.
PERFORM bdc_transaction USING 'FB01'.
REFRESH:bdcdata,messtab.
ENDLOOP.
REFRESH:bdcdata.
** PERFORM bdc_dynpro USING 'SAPMF05A' '0100'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'RF05A-NEWKO'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '/00'.
* PERFORM bdc_field USING 'BKPF-BLDAT'
* record-bldat_001.
* PERFORM bdc_field USING 'BKPF-BLART'
* record-blart_002.
* PERFORM bdc_field USING 'BKPF-BUKRS'
* record-bukrs_003.
* PERFORM bdc_field USING 'BKPF-BUDAT'
* record-budat_004.
* PERFORM bdc_field USING 'BKPF-MONAT'
* record-monat_005.
* PERFORM bdc_field USING 'BKPF-WAERS'
* record-waers_006.
* PERFORM bdc_field USING 'BKPF-XBLNR'
* record-xblnr_007.
* PERFORM bdc_field USING 'BKPF-BKTXT'
* record-bktxt_008.
* PERFORM bdc_field USING 'FS006-DOCID'
* record-docid_009.
* PERFORM bdc_field USING 'RF05A-NEWBS'
* record-newbs_010.
* PERFORM bdc_field USING 'RF05A-NEWKO'
* record-newko_011.
* PERFORM bdc_dynpro USING 'SAPMF05A' '0301'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'RF05A-NEWKO'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '/00'.
* PERFORM bdc_field USING 'BSEG-WRBTR'
* record-wrbtr_012.
* PERFORM bdc_field USING 'BSEG-ZTERM'
* record-zterm_013.
* PERFORM bdc_field USING 'BSEG-ZBD1T'
* record-zbd1t_014.
* PERFORM bdc_field USING 'BSEG-ZFBDT'
* record-zfbdt_015.
* PERFORM bdc_field USING 'BSEG-ZUONR'
* record-zuonr_016.
* PERFORM bdc_field USING 'BSEG-SGTXT'
* record-sgtxt_017.
* PERFORM bdc_field USING 'RF05A-NEWBS'
* record-newbs_018.
* PERFORM bdc_field USING 'RF05A-NEWKO'
* record-newko_019.
* PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'BSEG-SGTXT'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '/00'.
* PERFORM bdc_field USING 'BSEG-WRBTR'
* record-wrbtr_020.
* PERFORM bdc_field USING 'BSEG-MWSKZ'
* record-mwskz_021.
* PERFORM bdc_field USING 'BSEG-ZUONR'
* record-zuonr_022.
* PERFORM bdc_field USING 'BSEG-SGTXT'
* record-sgtxt_023.
* PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'COBL-PRCTR'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '=ENTE'.
* PERFORM bdc_field USING 'COBL-PRCTR'
* record-prctr_024.
* PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'BSEG-WRBTR'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '=STER'.
* PERFORM bdc_field USING 'BSEG-WRBTR'
* record-wrbtr_025.
* PERFORM bdc_field USING 'BSEG-MWSKZ'
* record-mwskz_026.
* PERFORM bdc_field USING 'BSEG-ZUONR'
* record-zuonr_027.
* PERFORM bdc_field USING 'BSEG-SGTXT'
* record-sgtxt_028.
* PERFORM bdc_field USING 'DKACB-FMORE'
* record-fmore_029.
* PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'COBL-PARGB'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '=ENTE'.
* PERFORM bdc_field USING 'COBL-PRCTR'
* record-prctr_030.
* PERFORM bdc_dynpro USING 'SAPLTAX1' '0300'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'BSET-FWSTE(01)'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '=GOBU'.
* PERFORM bdc_field USING 'BSET-FWSTE(01)'
* record-fwste_01_031.
* PERFORM bdc_transaction USING 'FB01'.
* ENDDO.
PERFORM close_group.
* PERFORM close_dataset USING dataset.
*endif.
*& Form sub_browse_file
* text
* --> p1 text
* <-- p2 text
FORM sub_browse_file .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
* FIELD_NAME = ' '
IMPORTING
file_name = pfile.
ENDFORM. " sub_browse_file
*& Form sub_data_load
* text
* --> p1 text
* <-- p2 text
FORM sub_data_load .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
* I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw
i_filename = pfile
TABLES
i_tab_converted_data = it_excel[]
* EXCEPTIONS
* CONVERSION_FAILED = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " sub_data_load
**& Form data_selection
** text
** --> p1 text
** <-- p2 text
*FORM data_selection .
* SELECT * FROM bkpf
* INTO CORRESPONDING FIELDS OF TABLE it_bkpf
* WHERE budat = p_budat AND
* bukrs = p_bukrs.
* IF NOT it_bkpf[] IS INITIAL.
* SELECT belnr dmbtr mwsts pswsl
* FROM bseg INTO TABLE it_bseg
* FOR ALL ENTRIES IN it_bkpf
* WHERE belnr = it_bkpf-belnr AND
* kunnr = p_kunnr AND
* hkont = p_hkont AND
* pswsl = p_waers.
* ENDIF.
*ENDFORM. " data_selection
**& Form data_move
** text
** --> p1 text
** <-- p2 text
*FORM data_move.
* SORT : it_bseg BY belnr,
* it_bkpf BY belnr.
* LOOP AT it_bseg.
* it_final-dmbtr = it_bseg-dmbtr.
* it_final-belnr = it_bseg-belnr.
* it_final-mwsts = it_bseg-mwsts.
* it_final-pswsl = it_bseg-pswsl.
* READ TABLE it_bkpf WITH KEY belnr = it_bseg-belnr BINARY SEARCH.
* IF sy-subrc = 0.
* it_final-budat = it_bkpf-budat.
* it_final-bldat = it_bkpf-bldat.
* it_final-xblnr = it_bkpf-xblnr.
* it_final-bktxt = it_bkpf-bktxt.
* ENDIF.
* APPEND it_final.
* CLEAR it_final.
* ENDLOOP.
*ENDFORM. " data_move
*& Form alv_get_data
* text
* --> p1 text
* <-- p2 text
FORM alv_get_data .
CLEAR it_fieldcat.
***************** Document number
* wa_fieldcat-col_pos = '1'. " ALV O/P COL-1
wa_fieldcat-fieldname = 'XBLNR_007'.
wa_fieldcat-seltext_m = 'Document number'.
wa_fieldcat-just = 'L'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
wa_fieldcat-tabname = 'IT_EXCEL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
***************** Posting Date
* wa_fieldcat-col_pos = '2'. " ALV O/P COL-1
wa_fieldcat-fieldname = 'BUDAT_004'.
wa_fieldcat-seltext_m = 'Posting Date'.
wa_fieldcat-just = 'L'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 20.
wa_fieldcat-tabname = 'IT_EXCEL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
******************** Document Date
* wa_fieldcat-col_pos = '3'. " ALV O/P COL-2
wa_fieldcat-fieldname = 'BLDAT_001'.
wa_fieldcat-seltext_m = 'Document Date'.
wa_fieldcat-just = 'L'.
wa_fieldcat-tabname = 'IT_EXCEL'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
********************* REFERENCE DOCUMENT
** wa_fieldcat-col_pos = '4'. " ALV O/P COL-2
* wa_fieldcat-fieldname = 'XBLNR'.
* wa_fieldcat-seltext_m = 'REFERENCE DOCUMENT'.
* wa_fieldcat-just = 'L'.
* wa_fieldcat-tabname = 'IT_EXCEL'.
** wa_fieldcat-outputlen = 15.
* APPEND wa_fieldcat TO it_fieldcat.
* CLEAR wa_fieldcat.
***************** DOCUMENT HEADER TEXT
* wa_fieldcat-col_pos = '5'. " ALV O/P COL-3
wa_fieldcat-fieldname = 'SGTXT_017'.
wa_fieldcat-seltext_m = 'DOCUMENT HEADER TEXT'.
wa_fieldcat-just = 'L'.
wa_fieldcat-tabname = 'IT_EXCEL'.
* wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*******************Invoice Net amount
* wa_fieldcat-col_pos = '6'. " ALV O/P COL-4
wa_fieldcat-fieldname = 'WRBTR_012'.
wa_fieldcat-seltext_m = 'Invoice Net amount'.
wa_fieldcat-just = 'L'.
wa_fieldcat-tabname = 'IT_EXCEL'.
* wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*********** Tax Amount
* wa_fieldcat-col_pos = '7'. " ALV O/P COL-5
wa_fieldcat-fieldname = 'WRBTR_025'.
wa_fieldcat-seltext_m = 'Tax Amount'.
wa_fieldcat-just = 'L'.
* wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-tabname = 'IT_EXCEL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*********** NEt Amount
* wa_fieldcat-col_pos = '7'. " ALV O/P COL-5
wa_fieldcat-fieldname = 'WRBTR_020'.
wa_fieldcat-seltext_m = 'Net Amount'.
wa_fieldcat-just = 'L'.
* wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-tabname = 'IT_EXCEL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*********** General ledger currency
* wa_fieldcat-col_pos = '7'. " ALV O/P COL-5
wa_fieldcat-fieldname = 'WAERS_006'.
wa_fieldcat-seltext_l = 'General ledger currency'.
wa_fieldcat-just = 'L'.
* wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 25.
wa_fieldcat-tabname = 'IT_EXCEL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
ENDFORM. " alv_get_data
*& Form alv_grid
* text
* --> p1 text
* <-- p2 text
FORM alv_grid .
* PERFORM fill_list_header USING it_top_of_page[].
* PERFORM event-build USING gt_events[].
PERFORM fill_layout USING ls_layout.
MESSAGE 'Please press F3 to generate a session or call transaction method after getting report!' TYPE 'I'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
is_layout = ls_layout
it_fieldcat = it_fieldcat
it_events = gt_events[]
i_save = 'A'
TABLES
t_outtab = it_excel
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " alv_grid
* FORM FILL_LAYOUT *
FORM fill_layout USING p_ls_layout TYPE slis_layout_alv.
p_ls_layout-zebra = 'X'.
p_ls_layout-cell_merge = 'X'.
ENDFORM. "fill_layout
*& Form sub_calc_excel
* text
* --> p1 text
* <-- p2 text
FORM sub_calc_excel .
data: idate TYPE sy-datum,
tdat8 type string.
LOOP AT it_excel.
CONCATENATE it_excel-blart_002 '/' it_excel-monat_005 '/' it_excel-bktxt_008 INTO
it_excel-sgtxt_017.
it_excel-bukrs_003 = p_bukrs.
* it_excel-budat_004 = p_budat.
it_excel-waers_006 = p_waers.
it_excel-newko_011 = p_hkont.
it_excel-kunnr_019 = p_kunnr.
it_excel-mwskz = p_mwskz.
it_excel-prctr = p_prctr.
idate = p_budat.
CALL FUNCTION 'DATUMSAUFBEREITUNG'
EXPORTING
* FLAGM = ' '
* FLAGW = ' '
IDATE = idate
* IMONT = ' '
* IWEEK = ' '
IMPORTING
* MDAT4 =
* MDAT6 =
* TDAT4 =
* TDAT6 =
TDAT8 = tdat8
* WDAT4 =
* WDAT6 =
* EXCEPTIONS
* DATFM_UNGUELTIG = 1
* DATUM_UNGUELTIG = 2
* OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
it_excel-budat_004 = tdat8.
* CONCATENATE it_excel-budat_004+4(2) '/' it_excel-budat_004+6(2) '/' it_excel-budat_004+0(4)
* INTO it_excel-budat_004.
* SPLIT it_excel-bldat_001 AT '/' INTO it_excel-month it_excel-date.
* CONCATENATE it_excel-date '.' it_excel-month '.' it_excel-bldat_001+6(4) INTO it_excel-bldat_001.
MODIFY it_excel.
CLEAR it_excel.
ENDLOOP.
ENDFORM. " sub_calc_excel
*& Form write
* text
* --> p1 text
* <-- p2 text
*form write .
*OPEN DATASET dataset FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*data: wa_excel like line of it_excel.
*loop at it_excel into wa_excel.
*TRANSFER wa_excel to dataset.
*endloop.
*CLOSE DATASETdataset.
*endform. " write -
I have done extensive programming with the SQL Toolkit with LabVIEW versions through 6.1. My customer now wants to upgrade to Windows 7, so I am trying to upgrade to LabVIEW 2009 (my latest purchased version) using the Database Connectivity Toolkit, and the SQL Toolkit Compatibility vis. Everything seemed to be going okay with the higher level SQL operations, but I ran into trouble with the Get Column Name.vi.
The pictures below show the problem. The original SQL Toolkit connected the Prepare SQL.vi with the Get Column Name.vi with a cluster of two references, one for connection, and one for sql. The new compatibility vis have a class conflict in the wire because the Prepare SQL.vi contains a cluster with connection, and command references, but the Get Column Name.vi expects a cluster with connection and recordset references.
How do I resolve this conflict?
Thank You.
DanI've never worked with the old version of the toolkit, so I don't know how it did things, but looking inside the SQL prep VI, it only generates a command, and the the column name VI wants a recordset. I'm not super familiar with all the internals of ADO, but my understanding is that is standard - you only have the columns after you execute the command and get the recordset back. What you can apparently do here is insert the Execute Prepared SQL VI in the middle and that will return what you need.
I'm not sure why it worked before. Maybe the execute was hidden inside the prep VI or maybe you can get the column names out of the command object before execution. In general, I would recommend considering switching to the newer VIs.
Try to take over the world! -
Enterprise Manager is not able to connect to the database instance. The sta
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
Listener is shown as unavailable.
lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 27-NOV-2012 11:52:40
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=freds-server.i-surname.co.uk)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 27-NOV-2012 11:50:02
Uptime 0 days 0 hr. 2 min. 37 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /opt/oracle/11g/network/admin/listener.ora
Listener Log File /opt/oracle/diag/tnslsnr/freds-server/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=freds-server)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=freds-server)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "GWORCL.i-surname.co.uk" has 2 instance(s).
Instance "GWORCL", status UNKNOWN, has 1 handler(s) for this service...
Instance "GWORCL", status READY, has 1 handler(s) for this service...
Service "GWORCLXDB.i-status.co.uk" has 1 instance(s).
Instance "GWORCL", status READY, has 1 handler(s) for this service...
The command completed successfully
I suspect that this is not just an OEM issue.
see
Listener working but not working for Enterprise manager oracle 11gr2 Linux.
for configuration files
Edited by: Neill_R on Nov 27, 2012 11:51 AMThis was solved by : Osama_mustafa
in the general questions forum
emca -deconfig dbcontrol db -repos drop
emca -config dbcontrol db -repos create -
Oracle SQL Developer error - "The file-based source procedure Name is not present in the database."
I recently started working on the Oracle SQL developer. I have 'select' privileges on the QA schema and when tried to execute proc in QA. It is giving the error as 'The file-based source <procedure Name> is not present in the database. Was it compiled?'
instead 'you do not have sufficient privileges to execute this procedure'. Did research on internet but with no luck.What configuration changes needed to be done to make it work.Guide me.Sounds like you do not have the correct privileges. What should have been granted to you by the QA user, or some other user with appropriate privileges, is...
grant EXECUTE on "QA"."<PROCEDURE_OF_INTEREST>" to "<YOUR_USERID>" ;
Note that a grant of execute on a procedure has nothing to do with grants of select on some or all of QA's tables and views.
So, as Vadim suggests, from your connection node in SQL Developer's Connections view, if you expand the Other Users node, then expand QA and look in the Procedures node, do you see the procedure of interest? If not, you cannot expect to be able to execute it from your userid's connection. And even if you do see it, you may have some other privilege that permits viewing but not executing, like...
The role SELECT_CATALOG_ROLE
The system privilege SELECT ANY DICTIONARY
And even if you do not see it there, then having certain other privileges granted to you could permit executing it in general, like...
The role EXECUTE_CATALOG_ROLE
The system privilege EXECUTE ANY PROCEDURE
Also, note that the 3.0 release is a bit dated nowadays. Upgrading to 4.0.3 production or even the 4.1 EA2 (early adopter) release will, in general, give you a better experience.
Best wishes,
Gary -
How to create a generalized version of the detailed polygons?
How to create a generalized version of the detailed polygons?
I have a table of detailed polygons (100+ vertices) and I want to get generalized version of these polygons.
For example, assume I have a polygon with 100 vertices. Distance between vertex n and n+1 is 1.0.
I want to get geometry (generalized polygon, line or point) where distance between vertex n and n+1 is 10.0 or more (I want vertices to be considered as one vertex if distance between them is less then 10.0).
Is it possible to create generalized version of polygons on the fly?
Any help is appreciated.
Thanks.Scenario A:
If all of your polygons have no interaction among them (No polygon shares any boundary with any other ones).
In this case you can use the sdo_util.simplify in 10g to reduce the vertices in your polygons which returns new polygon geometries on the fly.
If you found that simplify is not doing exactly what you want, you can always roll out your own implementation using PL/SQL or the new SDOAPI JGeoemtry class in Java. Both will give you complete access to the coordinate arrays in a polygon and update them back to the database after you have simplified them in your code.
Scenario B:
If your polygons share boundaries, then the above methods will not work since the simplification process may not preserve the topology among your polygons. What you can do then is to use the Java topo package to create a new topology by adding all of your polygons to to an empty topology (which you first create in the database and then load into memory using oracle.spatial.topo.TopoMap). Once you have a topology built in the memory, you can use methods such as oracle.spatial.topo.TopoMap.changeEdgeCoords() to simplify the edges of your polygons. You can then recreate the simplified polygons from the topology. This is just a rough guide; for more details you need to check out the java doc for the various packages mentioned above which are shipped with 10g spatial. -
Starting yesterday (I believe) we are suddenly receiving a "User not found" error when trying to view a user's profile page when clicking on their name (in search or elsewhere) via the url
https://www.contoso.org/Person.aspx?accountname=contoso%255Cmyuserlogin
This is happening for all users. (but profiles exist and seem ok, and sync with AD is running fine) When looking in the logs I see the error (full ULS log is later below)
Exception in LoadRequestedUserProfile: (Microsoft.Office.Server.UserProfiles.UserNotFoundException: User Not Found: Could not load profile data from the database.
The only clue of what MAY be going on is just before that I see the following two lines which came up after I changed the Database logging to Verbose:
ConnectionString: 'Data Source=INSTANCE;Initial Catalog=UPAPROFILEDB;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][UPAPROFILEDB]' Partition:
NULL ConnectionState: Closed ConnectionTimeout: 15
SQL connection time: 0.0456 for Data Source=INSTANCE;Initial Catalog=UPAPROFILEDB;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile]
If I am reading that correctly, does it mean the connection to the database is timing out instantly? I am able to use powershell to pull up profiles and print them to the screen while on the webservers. And it's only the one specific page that is not
working.
What sort of tests or further debugging can I do for the error above?
We are on premise, SharePoint 2013 sp1, sql2012, server 2012, claims using the full SharePoint Profiile Sychronization against AD. Farm has been running since last august. Last week the admin team did run windows update on all servers, I can't be sure
if it was broken for 5 days and no one noticed or if it broke yesterday.
I already did the following:
Verified the profiles do exist in central admin.
I can still access their personal sites directly via
https://www.contoso.org/personal/myuserlogin
I checked the ProfileDB database and made sure the service accounts for the UPA has dbowner, so does the farm account, and the web application pool has SPDataAccess.
Verified the AD sync account has proper rights in AD.
I reran a full synchronization which ran with no errors.
File systems on the webservers and appserver have plenty of free space.
Rebooted every server in farm
I even checked the bin directory of the mysite webapplication, (since once I had a weird problem where access to bin was removed.) WSS_ADMIN_WPG, WSS_RESTRICTED_WPG_W4 have full control and WSS_WPG,IIS_IUSRS all have read and execute.
I opened powershell on the webserver I can indeed load profiles and print their values.
Timestamp Area Category EventID Level Message Correlation
07/25/2014 14:11:08.43 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Parent No
07/25/2014 14:11:08.43 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz) be11a89c-fbe8-a08d-57d2-afa6a4948743
07/25/2014 14:11:08.43 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 nasq be11a89c-fbe8-a08d-57d2-afa6a4948743
07/25/2014 14:11:08.43 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Execution Time=1.3859 be11a89c-fbe8-a08d-57d2-afa6a4948743
07/25/2014 14:11:08.47 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Parent No
07/25/2014 14:11:08.47 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz) be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.49 SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|fa\cbuchholz, ClaimsCount=167 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Files ak8dj High UserAgent not available, file operations may not be optimized. at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb) at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, ... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbst... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...rRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ... String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes, ... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean& ObjectIsList, Guid& listId) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String& siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, ... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64& bytes) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetFileForRequest(HttpContext context, SPWeb web, Boolean exclusion, String virtualPath) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.InitContextWeb(HttpContext context, SPWeb web) at Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IEx... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...ecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompl... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...etion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Files aiv4w Medium Spent 0 ms to bind 4224 byte file stream be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=11.7341 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2aw Verbose GetPartitionPropertiesCache :: ApplicationId = c604ddac-b9f9-4661-b31f-44cdcf2b78dc be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2ax Verbose GetPartitionPropertiesCache :: Trying to find existing cache be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2az Verbose GetPartitionPropertiesCache :: Getting Cached object be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2aw Verbose GetPartitionPropertiesCache :: ApplicationId = c604ddac-b9f9-4661-b31f-44cdcf2b78dc be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2ax Verbose GetPartitionPropertiesCache :: Trying to find existing cache be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2ay Verbose GetPartitionPropertiesCache :: Found existing cache in httpcontext be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Server Database tzku Verbose ConnectionString: 'Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile]' Partition: NULL ConnectionState: Closed ConnectionTimeout: 15 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Server Database ahjqp Verbose SQL connection time: 0.0583 for Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile] be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://www.hungernet.org/. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://www.hungernet.org/. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://lnkd.in/bb6rsHj. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Server Database tzku Verbose ConnectionString: 'Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile]' Partition: NULL ConnectionState: Closed ConnectionTimeout: 15 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Server Database ahjqp Verbose SQL connection time: 0.0456 for Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile] be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Portal Server User Profiles ajw8l High Exception in LoadRequestedUserProfile: (Microsoft.Office.Server.UserProfiles.UserNotFoundException: User Not Found: Could not load profile data from the database. at Microsoft.Office.Server.UserProfiles.UserProfile.Load(SqlDataReader myReader, Boolean bFirstRead, Boolean firstReaderIsViewerRights, Boolean includeColleagueRecords, Boolean includeLanguageAndRegionalSettings, Boolean shouldCloseReader) at Microsoft.Office.Server.UserProfiles.UserProfile.RetrieveUser(String strAcct, Guid gAcct, Byte[] bSid, Nullable`1 recordId, Boolean doNotResolveToMasterAccount, Boolean loadFullProfile, Boolean loadColleagueRecordIds, String strEmail) at Microsoft.Office.Server.UserProfiles.UserProfile..ctor(UserProfileManager objManager, String strAcct, Boolean doNotResolveToMasterAccount, Boole... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55* SharePoint Portal Server User Profiles ajw8l High ...an forceUserIsSelf, Boolean loadFullProfile, Boolean loadColleagueRecordIds, String strEmail) at Microsoft.Office.Server.UserProfiles.UserProfileManager.GetUserProfile(String strAccountName, Boolean doNotResolveToMasterAccount, Boolean loadFullProfile, Boolean loadColleagueRecordIds) at Microsoft.SharePoint.Portal.WebControls.ProfilePropertyLoader.LoadRequestedUserProfile(String& redirectionUrl)) be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation General aat87 Monitorable be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 nasq,20 ajji6,3 agb9s,10 ak8dj,1 b4ly,25 adyrv,1 adyrv,4 adyrv,3 ajw8l,1 aat87,3 ajji6 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Execution Time=78.9958 be11a89c-ebeb-a08d-57d2-a513d117e184Have Windows Updates been applied? See my note about this
https://twitter.com/imorrish/status/491020435039854592
Look at the URL in the search results. It may have invalid character in which case you can use this fix
http://blogs.msdn.com/b/spses/archive/2014/06/30/sharepoint-2013-the-search-results-with-5c-the-character-will-become-double-encoded-and-causes-broken-links.aspx
Regards,
Ian
http://sps.cloudapp.net
Regards, Ian Internet Sites running on SharePoint 2013 http://j.mp/sp2013sites -
URGENT: how to get the database error message into application?
Hi, pls give some idea:
For example, the database is MS Access. When insertion failed, the getMessage() method of SQLException will print "General error", while the log file created by ODBC will be "[MICROSOFT][ODBC DRIVER]column ID no found in student table"(...just a example).
So, how to get this message in our application?instead of using the getMessage method, have you tried something like this:
try {
} catch (Throwable t1) {
System.out.println(t1.toString());
}If that still doesn't work, you can always redirect the log entries into a textarea but then everything that appears in the log file will be redirected!
;o)
V.V. -
Hi Lync gurus,
I have a weird issue:
Just installed a Lync Standard 2013.
Everything works except I keep getting this error in Log: every 30 minute or so.
First an Error: Event 47067
A server did not respond to HTTP request
Server lyncserver.domain.local did not respond to HTTP request PublishCertRequest targeted at
https://lyncserver.domain.local:444/LiveServer/UserPinService.
Cause: Server might be down or the network path between servers might not be properly configured.
Resolution:
Please ensure that the server can be connected on the target port using telnet and then re-try.
Then I get a Warning: Event 47068
GetAndPublish web service failed.
Certificate could not be published in the database associated with User Services Cluster [lyncserver.domain.local ]. Request Details - Entity: [[email protected]], Device Id: [6BB30A3E-2923-553A-8E5F-0B2FB2CEA330], Authenticated User: [sip:[email protected]].
Additional Context: [Publish_Failure: OtherFailure;HttpNoResponse:"lyncserver.domain.local "]
Cause: This could be due to network connectivity issues with the remote server, or because the database is down.
Resolution:
Please ensure that the user services is reachable and the database is up and running.
Thanks for any helpPlease check you can telnet port 443 and port 444 on Lync Front End Serve from client.
Try to regenerate a new certificate for Lync Front End Server.
Check all the services on Lync Front End Server are started.
Check the option “Enable all purposes for this certificate” is checked for the trusted root CA certificate.
For the detailed steps:
Run MMC--Add\Remove Snap-ins--certificates--Local Computer--Trusted Root Certificate Authorities--Certificates, find the Root CA certificate you installed--Properties--General, check the "Enable all purposes for this certificate".
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Error preventing the commit to the database??!
hi ,
i have this form i use to modify a record on the database
i just want to add a date to a certain column but in the browser when i hit the commit
it says
JBO-26080 Error while selecting entity for <name of the table>
i am kind of confused i check the error report site the site that give (very small explanation on the JBO errors) and it says :
JBO-26080: DMLException
Cause: An unexpected exception occurred while executing the SQL to fetch data for an entity instance or lock it.
Action: Fix the cause for the SQLException in the details of this exception.
which is VERY general so if someone could please clear me on this
by the way i am using ADF BC and all the attributes have the updatable set to always
thx carlthx for the reply
yeah it turned out that the squeleton of the table posted on the DB was not the same as the one in jdev
one table has been removed and it was not in jdev
i tried the syncronise with database option but this option does not seem to check for this
why is that?
what exactly is this option syncronising with the DB? if it is not check for changes inside the table
thx carl
Maybe you are looking for
-
Is it possible to share an iTunes Library?
I have 3 macs and the airport extreme. I would like to have one iTunes library on an external drive attached to the extreme where I download and rip all music and then be able to share it across all 3 macs.
-
Attachments in Mail with iLife '08
I "upgraded" to iLife '08 about two weeks ago. Ever since, I have been unable to attach a photo to my email. After my email is composed, I click on "Attach" click on "Photos" then go to iPhoto. At this point, no folders open up like before. I do not
-
HT2500 delete address book entries
How do you delete address book entries?
-
Swapping from macbook pro to macbook air
I am wondering to how to do this, I have a 500 GB macbook pro and want to go to the macbook air, the problem is i have about 250Gb full on there so i cant do a even swap. Do most of you AIR users carry a external hd? If i make the swap, what is the b
-
Compressor Won't Work after Crash
Thanks for reading, I had my final sequences set up for my premiere this evening, when my computer had an unplanned shutdown. After restart (and many subsequent restarts) I find compressor will set up properly, but when I want to do a batch, it just