Generally, is it better to have one LONG script/applet or break up the functions?
Let's say I'm doing processing for 5 things that are semi-related, or the same process but for many interfaces. Should I have one script/applet that does it all or make five scripts/applets?
Does Cisco EEM work better with multiples short sessions or one longer session?
Thanks,
Tim
EEM was designed to provide short-running automations. The default max runtime for all policies is 20 seconds. However, this runtime can be extended to huge values. It really depends on the specific use case as to whether it's better to do all the work in one policy, or break things up into multiple policies and chain them together. If the policy will be doing the same thing, but on a large-ish dataset (like interfaces) it would be better to do it all in one policy versus trying to duplicate the logic in multiple policies.
Similar Messages
-
I would like to have one apple ID and sign in for the Australian Apple Store and for the New Zealand Apple Store without it asking me to switch stores. Is this possible? If not can I setup two stores (one in each country) using the same email address and same password (both and / or either)?
An iTunes account can only be used in one store at a time, and you need to be in that country with a valid billing address on your account for that country in order to use it there. An email address can only be linked to one account, so if you want two separate iTunes accounts then you will need two email addresses
-
My snapchat use to work fine and now all of a sudden It notifies me that I have one but it wont show up under the app. ?
If you mean finding your IP address you have to enter the router's settings via a web browser. and go to the Status page. It will likely be under the heading Internet Port. Then you can Google for:
who owns XXX.XXX.XXX.XXX
where the x's is the IP address. -
i have an ipod touch 3rd gen.I used the function of erasing all contents and settings and now i am stuck with this screen showing the apple logo and the loading sign for the past 17 hours.CAN SOMEONE PLEASE HELP!!!!!!!!!!!!
Hold down the on/off button and the home button for 20 to 30 sec, when the iPod starts and the Apple logo is on the screen release the on/off button but continue to hold the home button until you see the plug into iTunes screen. Connect the iPod to iTunes and you should be good to go.
-
I have several buttons and events on the GUI of my app to monitor. Would it be better to use one Event Structure with several cases (10 or 15) or have a couple and split the cases evenly? None of the cases have much processing to handle, so there is not a time lag issue. I am just worried about overloading the structure. One of the tech support guys mentioned that the event structures are not that hard to get confused.
Has anyone had any problems with Event Structures?I use event structures very often in my code. I use them just to handle the interface and to run small code. I have had event structures that handled over 50 user interface events and never had a problem. In my personal opinion If there was any code to run I would let the event structure handle the the user interface event that fired a que in another while loop that handled the code.You can find examples on this, if not I will send you one. It is just good programming practice for beginners because it will alow you to build more robust VI's in the future.
Hope this helps
Joe
Joe.
"NOTHING IS EVER EASY" -
I have one message in my Inbox that I have tried numerous times to delete and I just can't get rid of it. I have tried the instructions that the Apple Support suggests but it still didn't work. Has anyone else had this problem?
I'm having the same problem. Seems to have started after an update about 4 days ago.
Mail seems to think the messages are files and won't let you have more than 1 with the same header in the Trash mailbox. If you do away with the Trash Mailbox by having mail delete the message instead of sending it to the Trash Mailbox the problem goes away, but so does the ability to recover a mistakenly deleted message. I get a lot of messages from the same people with the same header on the message. this problem is driving me crazy and I haven't been able to find anyone with any idea of whats causing it. Your the first user I've seen with this same problem.
Lets hope someone has an idea. I would really like to solve this without losing all of my old emails.
Ron Genovesi
(HMBGENO) -
I have one long clip...how to split?
Because the only video files I have available are long clips, I need to split them into smaller, more manageable clips. I know how to just drag an in/out point clip from the sequence into my bin, but that just gives me a selection of the larger clip...I want a clip that I can edit more easily (i.e. make in/out points in it without changing how long the clip is).
I thought that this is what Make Independent Clip did, but it doesn't seem to. I just want to take part of my larger clip and make a normal, smaller clip in my bin.Huh?
Of course you can mark In and Out marks in a Subclip in the Viewer. You load the master clip into the Viewer, IN, OUT, Command-U. Then you load the subclip into the Viewer. Then you mark your In and Out in the subclip...
Done. -
After I turn on my macbook, it takes a much longer time to turn on. I can move around the arrow, but nothing works. I tried to click every app, no response. I have to wait a long time and then everything works. Did I do something wrong?
ThanksStart Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Up until about a week ago I have not had a single internet connectivity problem. Then, all of the sudden airport will no longer connect and it keeps telling me that "Airport has self-assigned IP address and will not be able to connect to the internet." I did not change any settings, I didn't touch anything and all of the sudden it just will not connect anymore. Any help would be appreciated. Thanks!:)
These steps often sort out this problem...
System Preferences > Network
Select the AirPort from the left hand side
Click on the Locations combo box and select Edit Locations...
Click on + to add a new location, call it "Home" (or anything else you prefer)
Click on Advanced
Select the AirPort tab and enter your network name
Select TCP/IP tab.
Configure IPv4 Using DHCP
Now click on Renew DHCP Lease. After a few seconds you should get an IP address (probably 192.168.x.x)
Click on Proxies tab.
Select Auto Proxy Discovery and Use Passive FTP
Click on OK and Apply, etc.
Bob -
Final Cut Pro locking up when view all clips selected in the browser.
Russ H,
Yes, Force quit is the only option. No background tasks running, nothing on FCPX works, save I can move the beach ball around.
All the other menu options work fine. In fact, FCPX works in the library except when I select view all clips in the browser.
I am running Version 10.1.3 . It is only this library that has the problem. I am a new user so I only have three or four libraries so far. Most on the same local external drive.
The only difference I have been able to determine is the library in question has files on my boot drive as well as the local external. Could that be the issue?
Thanks for the prompt reply! -
When i go on my phone it says i have 3 new messages but when i click on it i really dont. I turned off and turned my phone on 3 times and it still says i have 3 new messages how do i stop that. Without actually turning on the bager icon thing that pops up on the app.
Hey there Samimanis_.
It sounds like your notification for messages is showing that you have a few mesages but when you go into the app, there are no new messages. I would start by signing out of your Apple ID in Settings > Messages. Then close the running apps on the phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone, sign back in, and try again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I don't know how I could make this any more clear.... Where the icons used to be, there is now either nothing at all or a square shaped by dotted lines.
Hi lskinner,
You should take a look at [https://support.mozilla.org/kb/latest-firefox-issues#os=mac&browser=fx9 this article] that discusses some of the issues with the latest build of Firefox.
There is some information in there that should help you to resolve your issue. Luckily, it is a very easy fix.
Hopefully this helps! -
I have one problem whit my iPhone 4 about the speaker
only i wanna know if apple can fix my iphone 4 because the speakers is broken.
restart it
http://support.apple.com/kb/ht1430
if that does not help them try taking out the sim and put it back in
if that does not help contact the place you bought if it's under warrenty -
MM: do I have to use bdc, when I already called the function?
I'm doing a bapi for requisition create. after calling the function and identified the tables, what's next? Supposed to be it would generate a PR # but it didn't. Please guide me.
IMPORT:
SKIP_ITEMS_WITH_ERROR TYPE BAPIMMPARA-SELECTION Skip Faulty Items
AUTOMATIC_SOURCE TYPE BAPIMMPARA-SELECTION 'X' Automatic source determination
EXPORT:
NUMBER TYPE BAPIEBANC-PREQ_NO Purchase requisition number
CODES:
CALL FUNCTION 'BAPI_REQUISITION_CREATE'
EXPORTING
SKIP_ITEMS_WITH_ERROR =
AUTOMATIC_SOURCE = 'X'
IMPORTING
NUMBER =
TABLES
requisition_items = lt_items
REQUISITION_ACCOUNT_ASSIGNMENT = lt_aac
REQUISITION_ITEM_TEXT = lt_item_text
REQUISITION_LIMITS =
REQUISITION_CONTRACT_LIMITS =
REQUISITION_SERVICES =
REQUISITION_SRV_ACCASS_VALUES =
RETURN = lt_return
REQUISITION_SERVICES_TEXT =
REQUISITION_ADDRDELIVERY =
EXTENSIONIN =Hi !
Most of the BAPIs need a COMMIT WORK to start their work !
If not already done, you can try that.
Are all obligatory fields set ?
Do do get any errors ?
Finally you could check the OSS for the BAPI 'BAPI_REQUISITION_CREATE'. Maybe there are some known errors.
Regards
Rainer
Some points would be fine if that hepled a bit -
Is the CAT6 ethernet cable they sell good for the regular MBP to ethernet outlet or is buying this a waste of money? My ethernet CAT5 is really old, broken, and I can't beleive anything can move by the twists and knots it has in the cable. would it be better to purchase one of these tht I see in the store?
I have a ethernet cable that is at least 10 years old, and I use it all the time. Nevertheless, if you want to buy one, just order the cheapest one you can find. I don't think the Apple Store sells ethernet cables that are somehow better than any other ones.
Of course, they make the best smartphone out there!
Maybe you are looking for
-
Windows 7 XP Mode BIOS set up?
Anybody using the beta version of Windows XP mode under Windows 7? I got as far as verifying that my processors do in fact allow for "hardware virtualization" but when I attempted to follow instructions to enable this feature, I could only find instr
-
Videos not displaying after I move the project
I had to move my project file to a new PC. I had videos linked in a few slides using progressive download and linking to the file. On a page with a video, the video just appears as a grey boc even though the link has the filename. How do i fix this -
-
How to create TABLE using "Go To Database Home Page"
I installed Oracle 10g Express The Database Home page is working fine using sys/system user name I understand that this is also an APEX INTERNAL Application. Now I installed APEX 3...latest version , the database page has now changed to APEX , Oracle
-
HI Guys, can some body explain what a pipe delimited file format is. thanks Column Name = WRKAREA_CODE Format of Pipe Delimited File = 20 Digits SAP DB Type = CHAR (20) Description = Work Area Code WRKAREA_CODE is a field of the table WFAV_WRKA
-
*Conditional* Refresh of IRR
I have an Interactive Report Region on a page which I have automatically refreshing. I am doing this with the following block placed in the Region Footer: <script type="text/javascript"> <!-- setInterval("jQuery('#US_INTRADAY_IRR').trigger('apexref