Generate a LabVIEW VI From My SignalExpress Project

I'm using Signal Express to acquire and analyse signal from Tektronix TDS 2012B digital storage oscilloscope.
I've two problems facing now.
1.
I'm not able to plot the BH Loop (Hysteresis Loop) in Signal Express, which is shown correctly in TDS 2012B but it is shown as two seperate channels in Signal Express. How can i get the BH loop in Signal Express.
I've attached the snapshots for the signal from 'TDS 2012B' and 'Signal Express'
2.
Now I've this project saved in my comptuer. I was trying to convert this project to a LabVIEW vi. While converting it shows an error that "Tektronix instrument control steps cannot be generated into LABVIEW code at this time".
What should i do to convert the saved project into a labview code successfully.A snapshot of the 'error' is attached with this message.
Using LabVIEW 8.0, 8.0.1, 8.2
Attachments:
Error.jpg ‏87 KB
TDS 2012B image.jpg ‏96 KB
from Signal express.png ‏7 KB

Hi,
Sorry, I didn't realize you were using SignalExpress 1.2. The ability to view time signals as XY was added in SignalExpress 2.0 which released earlier this year.
I'm including a simple LabVIEW VI which you can run in SignalExpress 1.2 using the "User-Defined Step". In the step, select the VI that I'm including and pass your 2 channels as inputs. The output of the step will be an XY value. You can graph this directly and it will be in XY. It's the equivalent of what SignalExpress 2.0 does natively in the graph.
I hope this helps,
Phil
Attachments:
ConvertToXY.vi ‏38 KB

Similar Messages

OKE Project Contracts - Generate Supplier invoice directly from Deliverable

Dear All,
In Project Contracts, Customer does not want to initiate requisition for the deliverables (Buy Contract - Non Item), instead they want Supplier invoice to be generated directly from the deliverables.
The process flow which the customer looking for in Oracle project contracts is as follows,
1. Create a Contract for Buy Intent - Non item deliverables
2. Authoring the Contract
3. Create Default deliverables
4. IN DTS, based on the deliverables, system should generate Supplier Invoice directly with contract and Project references.
Standard Flow - Contract Authoring > Default Deliverables > Initiate Requisition > Purchase order creation > Supplier Invoice > Interface costs to Projects
Proposed Flow - Contract Authoring > Default Deliverables > Initiate Supplier Invoice > Interface costs to Projects
Show some lights on this requirement.
Regards,
Kottee

Hi
As you may understand, the required flow is not delivered by Oracle.
You might consider a customization. Develop a program that finds the completed deliverables and create from them a supplier invoice. The program might insert the supplier invoice into AP open interface. From there you should import the invoice into Payables, validate and approve it.
Dina

How can I call a DLL from Borland C++Builder that was generated by LabVIEW?

In the linking phase, the linker of Borland C++Builder echoes the message shown below:
[Linker Error] 'Test.LIB' contains invalid OMF record, type 0x21 (possibly COFF)
'Test.LIB' was generated by LabVIEW Application Builder and had been verified working well with Microsoft Visual C++

"Murray Chen" schrieb im Newsbeitrag
news:[email protected]..
> In the linking phase, the linker of Borland C++Builder echoes the
> message shown below:
>
> [Linker Error] 'Test.LIB' contains invalid OMF record, type 0x21
> (possibly COFF)
>
> 'Test.LIB' was generated by LabVIEW Application Builder and had been
> verified working well with Microsoft Visual C++
Hi Murray,
Borland C++ Builder uses a .lib format which is not equal with VC++. You
have to rebuild your .lib by using implib.
Try 'implib library.lib library.dll' to create a new .lib.
Greets
Henrik

How to call LabVIEW dll from ATL COM dll

I have tried to call simple LabVIEW 8.6 Dll from win32 test application, class Library.
I have include LabVIEW generated SharedLib.h file and SharedLib.lib file in the test application which I created as simple win32 console project and also from win32 class Library. I was sucessfully able to call my LabVIEW dll funtion.
But when I create ATL COM project and try to add SharedLib.h file and SharedLib.lib file I used to get following erors
Error 1 error C2733: second C linkage of overloaded function 'StrCatW' not allowed d:\program files\national instruments\labview 8.6\cintools\extcode.h 463
Error 2 error C2733: second C linkage of overloaded function 'StrCpyW' not allowed d:\program files\national instruments\labview 8.6\cintools\extcode.h 464
Error 3 error C2733: second C linkage of overloaded function 'StrCpyNW' not allowed d:\program files\national instruments\labview 8.6\cintools\extcode.h 465
Error 4 error C2733: second C linkage of overloaded function 'StrCmpW' not allowed d:\program files\national instruments\labview 8.6\cintools\extcode.h 466
Error 5 error C2733: second C linkage of overloaded function 'StrCmpNW' not allowed d:\program files\national instruments\labview 8.6\cintools\extcode.h 467
these many errors.
Will some one explain me how to call LabVIEW dll from ATL COM dll.
Thanks & Regards,
Jay

I also had this problem. My application is unicode-aware, but I was attempting to link it to a library with primitive C-string arguments. You could dynamically load the DLL as suggested (more work), modify the header files (really not recommended), or if you are feeling lucky you could try fooling the compiler, as I was successfully able to do in Visual Studio 2010, by steering the preprocessor around those functions (assuming you're not using them, of course -- otherwise this probably wouldn't work):
// prepare for NI extcode.h inclusion. avoid linker errors for this project.
#define StrCatW(a,b)     IgnoreLinkError_StrCatW(a,b);
#define StrCpyW(a,b)     IgnoreLinkError_StrCpyW(a,b);
#define StrCpyNW(a,b,c) IgnoreLinkError_StrCpyNW(a,b,c);
#define StrCmpW(a,b)     IgnoreLinkError_StrCmpW(a,b);
#define StrCmpNW(a,b,c) IgnoreLinkError_StrCmpNW(a,b,c);
// header file for my LabView-built DLL (ASCII single-byte character arguments)
#include <MyLibraryHeader.h>
// clean up afterwards, put things back to 'normal'
#undef StrCatW
#undef StrCpyW
#undef StrCpyNW
#undef StrCmpW
#undef StrCmpNW

Program LPC2378 with code generated by LabView ARM embedded, without using LabView

I would like to use the C files that are originally generated in LabVIEW ARM embedded module, and use Keil software (or other lower cost) to load these files into custom boards with LPC2378 controller without LabView. Are there detailed instuctions for this? I am using version 8.6 and the ARM embedded module is 1.1.
My reason for this task is boards are being made in a maufacturing facility oversees, and they need to be programmed at their end.
I read a forum describing the use of hex files, but not enough detail for me to figure this out.
Thanks in advance.

Hey Bob,
What you're looking to do should be possible. You'll just need to build the application in LabVIEW, then you should be able to use the uVisions command line to deploy the system. As for the C code itself, it gets generated when you build your build specification and you should see it placed in the same directory as your labview project in a folder named the name of your project. For example, if your project were called My ARM Project, you'll see a folder called "My ARM Project" created/updated whenever you build the build specification in that project and it will contain the C Code. To see the code organized logically, after building your build specification, right-click on the ARM target and select "Show Keil uVision". This will open a uVision window in "LabVIEW mode" and you'll be able to see all of the C files associated with you application; your VI specific code will be under a folder titled "VIs". You could also just open the C code files from disk in uVision, which is what you'll need to do if LabVIEW isn't installed. The main LabVIEW project can be found in the built directory described above as the LabVIEW.uvproj file in the "target"/Application/"uvision version"/Project directory. For example my main file was built in MyProject\EK_LM3S8962\Application\4.01\Project. From there, you'll need to follow uVision's process for compiling and deploying the target code from their command line:
Command Line
http://www.keil.com/support/man/docs/uv4/uv4_commandline.htm
Hope this helps!
--Ryan_S

Unable to edit the Project details from PWA in Project server 2013

I am Migrating the project from MS Project 2007 to MS Project 2013.In that i save the project as a file first in 2007 and then open that file in MS Project 2013 And publish it.But in some Project when i am Trying to change the projects details from
PWA in Project server 2013 and then trying to save then the projects are not saving and are generating the error as shown below
•GeneralQueueException:◦GeneralQueueException (9131). Details: id='9131' name='GeneralQueueException' uid='f7bb5d93-20e9-e411-b302-005056ae159c' messageID='2' exception='System.TimeoutException: This request operation sent to net.pipe://localhost/pscalc_13c43af4a7d34a2c8145b776b325a865
did not receive a reply within the configured timeout (00:05:00). The time allotted to this operation may have been a portion of a longer timeout. This may be because the service is still processing the operation or because the service was unable to send a
reply message. Please consider increasing the operation timeout (by casting the channel/proxy to IContextChannel and setting the OperationTimeout property) and ensure that the service is able to connect to the client. Server stack trace: at System.ServiceModel.Dispatcher.DuplexChannelBinder.Request(Message
message, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type) at Microsoft.Office.Project.Server.Interfaces.ICalcService.OpenProjectRemappedProject(CalcServiceCallState callState, Guid realProjectGuid, Guid remappedProjectGuid, EngineSessionState& sessionState, EngineSessionType sessionType,
PSError& psError) at Microsoft.Office.Project.Server.BusinessLayer.CalcServiceChannel.OpenProjectRemappedProject(CalcServiceCallState callState, Guid realProjectGuid, Guid remappedProjectGuid, EngineSessionState& sessionState, EngineSessionType sessionType,
PSError& psError) at Microsoft.Office.Project.Server.BusinessLayer.CalcServiceProxy.<>c__DisplayClass2.<OpenProjectRemappedProject>b__1(ICalcServiceChannel calcServiceChannel, PSError& localPsError, EngineSessionState& localSessionState)
at Microsoft.Office.Project.Server.BusinessLayer.CalcServiceProxy.<>c__DisplayClass6e`1.<RunCalcServiceOperation>b__6c() at Microsoft.Office.Project.Server.Base.IdentityUtilities.<>c__DisplayClass1`1.<RunWithAccessToAppTierServices>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback
secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode) at Microsoft.Office.Project.Server.Base.IdentityUtilities.RunWithAccessToAppTierServices[T](Func`1 action) at Microsoft.Office.Project.Server.BusinessLayer.CalcServiceProxy.RunCalcServiceOperation[T](CalcServiceOperation3`1
func, EngineSessionState& sessionState, String scopeName) at Microsoft.Office.Project.Server.BusinessLayer.CalcServiceProxy.OpenProjectRemappedProject(Guid realProjectGuid, Guid remappedProjectGuid, EngineSessionState& sessionState, EngineSessionType
sessionType) at Microsoft.Office.Project.Server.BusinessLayer.ProjectEngineUpdate.OpenProject() at Microsoft.Office.Project.Server.BusinessLayer.ProjectEngineUpdate.HandleUpdate() at Microsoft.Office.Project.Server.BusinessLayer.ProjectQueueDispatch.HandleProject2(MessageContext
mContext, ProjectMain project, ServerEventManager sem, ProjectDataSet dataset, Guid projectUid, Guid sessionUid) at Microsoft.Office.Project.Server.BusinessLayer.ProjectQueueDispatch.InternalDispatchMessage(IPlatformContext context, Message msg, Group messageGroup,
JobTicket jobTicket, MessageContext mContext)'.
•Queue:◦GeneralQueueJobFailed (26000) - ProjectUpdate.ProjectUpdate2Message. Details: id='26000' name='GeneralQueueJobFailed' uid='f8bb5d93-20e9-e411-b302-005056ae159c' JobUID='a6fa36de-1fe9-e411-b302-005056ae159c' ComputerName='1af8030b-7714-4c8f-8738-903b73e87a82'
GroupType='ProjectUpdate' MessageType='ProjectUpdate2Message' MessageId='2' Stage='' CorrelationUID='0a4aff9c-dd6b-7015-87a8-29d876e1540c'. For more details, check the ULS logs on machine 1af8030b-7714-4c8f-8738-903b73e87a82 for entries with JobUID a6fa36de-1fe9-e411-b302-005056ae159c.
What will i do .Please help.

Hi Jeremy,
Thanks for the reply .I try the steps that is given in link above but its not working.Please suggest something.What
should i do.

Is it possible to call a VI that is inside a LabVIEW executable from a TestStand sequence?

I have created a custom TestStand operator interface and have modified the default sequential process model to display a UUT information dialog that prompts for more information than just the UUT serial number. This UUT information dialog is a LabVIEW VI. To distribute the operator interface, I build it into an executable. As part of the build process, I make a copy of the UUT information dialog VI (which is part of my operator interface project) and place it in the same folder as the executable. I have then configured the sequential process model to call the dialog VI from this location. It would be really nice if I could embed the UUT information dialog VI inside the operator interface executable so that I could distribute just an executable instead of an executable and separate VIs. Is this possible? In other words, is it possible to call a VI that is inside a LabVIEW executable from a TestStand sequence just like a standard LabVIEW VI call?

Ryan,
The dialog that you've created isn't being directly called by the OI at all and shouldn't need to be included in the same directory as the OI for distribution. Since you are modifying the PreUUT of the default process model, you will give the path to the VI in that step, create a deployment and then manually copy the VI to the directory referenced in the step. The VI is considered a support file for the process model and is not related to the OI at all.
Test Engineer - CTA

Weblogic 8.1 :: Getting error while generating Client java class from WSDL

Hi,
For SOAP webservice, I am using ant script to generate java client from WSDL but getting below error. Please inform if any suggestion to resolve this.
Also let me know if any other alternative to generate client java code.
Ant script:
===========
<project name="project" default="generateClientJar">
     <property file="build.property">
     </property>
     <taskdef name="clientgen" classname="weblogic.ant.taskdefs.webservices.clientgen.ClientGenTask">
          <classpath>
               <fileset dir="${build_lib.dir}" includes="*.jar" />
          </classpath>
     </taskdef>
     <path id="compile_path">
          <pathelement location="C:/jar/wls-api.jar" />
          <pathelement location="${build_lib.dir}/weblogic.jar" />
          <pathelement location="C:/jar/webserviceclient+ssl.jar" />
          <pathelement location="D:/Java_Src_10.1.0/nextgen_arch/wlpatch/webservices.jar" />
     </path>
     <target name="generateClientJar" depends="generate.client">
<clientgen wsdl="${wsdl.file}" classpathref="compile_path"
serviceName="${service.name}"
packageName= "${client.pkg}"
clientJar="${ws.client.name}" />
     </target>
     <target name="generate.client" description="Generate web-services client">
          <property name="wsdl.file" value="${sms.wsdl.file}"/>
          <property name="client.pkg" value="${sms.client.pkg}"/>
          <property name="ws.client.name" value="${ws.sms.name}"/>
          <property name="service.name" value="${sms.service.name}"/>
     </target>
</project>
build.property file
===========
base=C:/SMS
lib=E:/jar_path
sms.wsdl.file=${base}/SMS.wsdl
sms.client.pkg=com.db.dbdi.gtbportal.sms.client
ws.sms.name=${lib}/ws_SmsService_client.jar
sms.service.name=SMSService
build_lib.dir = E:/jar_path
Error log:
================
Buildfile: D:\Java_Src_10.1.0\ant\build_weblogic8.xml
generate.client:
generateClientJar:
[clientgen] Generating client jar for C:/SMS/SMS.wsdl ...
[clientgen] C:\Documents and Settings\amitkumar.patel\Local Settings\Temp\ws_SmsService_client.jar699419996\com\db\dbdi\gtbportal\sms\client\SMSPort.java:15: parameters is already defined in sendSMS(com.db.portal.webservices.sms.SendSMS,com.db.portal.webservices.sms.holders.SendSMSResponseHolder)
[clientgen] public void sendSMS(com.db.portal.webservices.sms.SendSMS parameters, com.db.portal.webservices.sms.holders.SendSMSResponseHolder parameters)
[clientgen] ^
[clientgen] C:\Documents and Settings\amitkumar.patel\Local Settings\Temp\ws_SmsService_client.jar699419996\com\db\dbdi\gtbportal\sms\client\SMSPort.java:21: parameters is already defined in getStatus(com.db.portal.webservices.sms.GetStatus,com.db.portal.webservices.sms.holders.GetStatusResponseHolder)
[clientgen] public void getStatus(com.db.portal.webservices.sms.GetStatus parameters, com.db.portal.webservices.sms.holders.GetStatusResponseHolder parameters)
[clientgen] ^
[clientgen] C:\Documents and Settings\amitkumar.patel\Local Settings\Temp\ws_SmsService_client.jar699419996\com\db\dbdi\gtbportal\sms\client\SMSPort_Stub.java:20: parameters is already defined in sendSMS(com.db.portal.webservices.sms.SendSMS,com.db.portal.webservices.sms.holders.SendSMSResponseHolder)
[clientgen] public void sendSMS(com.db.portal.webservices.sms.SendSMS parameters, com.db.portal.webservices.sms.holders.SendSMSResponseHolder parameters)
[clientgen] ^
[clientgen] C:\Documents and Settings\amitkumar.patel\Local Settings\Temp\ws_SmsService_client.jar699419996\com\db\dbdi\gtbportal\sms\client\SMSPort_Stub.java:39: parameters is already defined in getStatus(com.db.portal.webservices.sms.GetStatus,com.db.portal.webservices.sms.holders.GetStatusResponseHolder)
[clientgen] public void getStatus(com.db.portal.webservices.sms.GetStatus parameters, com.db.portal.webservices.sms.holders.GetStatusResponseHolder parameters)
[clientgen] ^
[clientgen] Note: C:\Documents and Settings\amitkumar.patel\Local Settings\Temp\ws_SmsService_client.jar699419996\com\db\dbdi\gtbportal\sms\client\SMSService.java uses or overrides a deprecated API.
[clientgen] Note: Recompile with -deprecation for details.
[clientgen] 4 errors
*[*clientgen] java.io.IOException: Compiler failed executable.exec**
[clientgen] at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:470)
[clientgen] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
[clientgen] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
[clientgen] at weblogic.webservice.tools.build.internal.CompilerHelper.compileFiles(CompilerHelper.java:80)
[clientgen] at weblogic.webservice.tools.build.internal.ClientGenImpl.compileStubs(ClientGenImpl.java:627)
[clientgen] at weblogic.webservice.tools.build.internal.ClientGenImpl.generateStub(ClientGenImpl.java:572)
[clientgen] at weblogic.webservice.tools.build.internal.ClientGenImpl.doClientGenFromWsdl(ClientGenImpl.java:409)
[clientgen] at weblogic.webservice.tools.build.internal.ClientGenImpl.run(ClientGenImpl.java:340)
[clientgen] at weblogic.ant.taskdefs.webservices.clientgen.ClientGenTask.doClientGen(ClientGenTask.java:351)
[clientgen] at weblogic.ant.taskdefs.webservices.clientgen.ClientGenTask.execute(ClientGenTask.java:208)
[clientgen] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[clientgen] at org.apache.tools.ant.Task.perform(Task.java:364)
[clientgen] at org.apache.tools.ant.Target.execute(Target.java:341)
[clientgen] at org.apache.tools.ant.Target.performTasks(Target.java:369)
[clientgen] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
[clientgen] at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
[clientgen] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
[clientgen] at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
[clientgen] at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
[clientgen] at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423)
[clientgen] at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137)
BUILD FAILED
D:\Java_Src_10.1.0\ant\build_weblogic8.xml:34: weblogic.webservice.tools.build.WSBuildException: Compiler failed executable.exec - with nested exception:
[java.io.IOException: Compiler failed executable.exec]
Total time: 1 minute 12 seconds

Hi,
Can u Please post the WSDL..here. I remember long back i resolved this kind of issue...when i was getting "*parameters is already defined in - - -*" while using ClientGen.
Once i will get the WSDL may be i can recall it...
If u have any problem in Posting the WSDL..in Forums .. then let me know I will send my E-Mail Address...
As far as i remember ..it usually happens when we Run ClientGen task of WLS81 ON the WebService/WSDL generated by WebLogic 9.x or Above. Please let me know if this is the Case with you as well... . I remember there is a Patch for it...for WLS8 ClientGen task...I dont remember the Patch Number Exactly.
Just For testing:
Just Use WLS9.x ClientGen task On the Same WSDL
<taskdef name="clientgen" classname="weblogic.wsee.tools.anttasks.ClientGenTask" />
I am sure you will not see this issue... because the issue is there only with WLS8 Clientgen...
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)
Edited by: Jay SenSharma on Jan 8, 2010 4:32 PM
Edited by: Jay SenSharma on Jan 8, 2010 4:34 PM

Generate an HTML file from a Report in ABAP

Good morning,
How I could generate an HTML file from a report.
Any Ideas... I have found the function WWW_ITAB_TO_HTML, but someone has the standar code and how use this function?
Thanks a lot,
Hernán Restrepo

Hi,
I am facing a similar problem.I did try using the function module WWW_ITAB_TO_HTML in the reoprt program, as I'm trying to generate a url from a report, but i'm not able to get the expected results. The code is given below. Could someone please try and help me resolve this issue.Thanks in advance.
DATA:   emp_name                     TYPE char80.
DATA:   it_itabex                    TYPE zdb_ex_tty,
        it_emp                       TYPE TABLE OF zis_emp,
        it_org                       TYPE TABLE OF zis_org,
        it_pos                       TYPE TABLE OF zis_pos,
        it_pos_alloc                 TYPE TABLE OF zis_pos_alloc,
        it_res                       TYPE TABLE OF zis_res,
        it_res_alloc                 TYPE TABLE OF zis_res_alloc,
        ls_itabex                    TYPE zdb_ex_s.
DATA:   lv_filename                  TYPE string,
        lv_path                      TYPE string,
        lv_fullpath                  TYPE string,
        lv_replace                   TYPE i.
DATA qstring LIKE it_itabex OCCURS 10.
DATA: url(200), url2(200), url3(200), fullurl(200).
FIELD-SYMBOLS: <fs_emp>              LIKE LINE OF it_emp,
               <fs_org>              LIKE LINE OF it_org,
               <fs_pos>              LIKE LINE OF it_pos,
               <fs_pos_alloc>        LIKE LINE OF it_pos_alloc,
               <fs_res>              LIKE LINE OF it_res,
               <fs_res_alloc>        LIKE LINE OF it_res_alloc.
Report Program to export data from database to Excel.
Populate all the tables that have to be exported.
SELECT * FROM zis_org       INTO TABLE it_org.
SELECT * FROM zis_pos       INTO TABLE it_pos.
SELECT * FROM zis_pos_alloc INTO TABLE it_pos_alloc.
SELECT * FROM zis_emp       INTO TABLE it_emp.
SELECT * FROM zis_res_alloc INTO TABLE it_res_alloc.
SELECT * FROM zis_res       INTO TABLE it_res.
Append the Column Header
CLEAR ls_itabex.
ls_itabex-ipp_pos_id            = 'IPP Pos ID'.
ls_itabex-emp_name              = 'Name'.
ls_itabex-dt_of_join            = 'JoinedOn'.
ls_itabex-emp_status            = 'Status'.
ls_itabex-org_name              = 'Org'.
ls_itabex-prj_name              = 'Project'.
ls_itabex-mgr_name              = 'Line'.
ls_itabex-designation           = 'Designation'.
ls_itabex-specialization        = 'Specialization'.
APPEND ls_itabex TO it_itabex.
Append all the tables into one internal table
LOOP AT it_pos_alloc ASSIGNING <fs_pos_alloc>.
CLEAR ls_itabex.
ls_itabex-ipp_pos_id          = <fs_pos_alloc>-ipp_pos_id.
READ TABLE it_emp ASSIGNING <fs_emp> WITH KEY emp_guid = <fs_pos_alloc>-emp_guid.
IF sy-subrc = 0.
    CONCATENATE <fs_emp>-emp_fname <fs_emp>-emp_lname INTO ls_itabex-emp_name SEPARATED BY space.
    ls_itabex-dt_of_join        = <fs_emp>-dt_of_join.
    ls_itabex-emp_status        = <fs_emp>-emp_status.
    ls_itabex-specialization    = <fs_emp>-specialization.
ENDIF.
READ TABLE it_pos ASSIGNING <fs_pos> WITH KEY ipp_pos_id = <fs_pos_alloc>-ipp_pos_id.
IF sy-subrc = 0.
    ls_itabex-designation       = <fs_pos>-designation.
    READ TABLE it_org ASSIGNING <fs_org> WITH KEY org_id = <fs_pos>-org_id.
    IF sy-subrc = 0.
      ls_itabex-org_name        = <fs_org>-org_name.
      ls_itabex-mgr_name        = <fs_org>-mgr_name.
    ENDIF.
ENDIF.
READ TABLE it_res ASSIGNING <fs_res> WITH KEY org_id = <fs_org>-org_id.
   ls_itabex-org_name         = <fs_org>-org_name.
APPEND ls_itabex TO it_itabex.
ENDLOOP.
url = 'http://testweb/scripts/wgate/zvw10a/!?~language=en'.
url2 = '&~OkCode(LGON)=LGON&login-login_user='.
url3 = '&vbcom-vbeln='.
CONCATENATE url url2 url3 INTO fullurl.
WRITE: /'Staffing Excel'.
CALL FUNCTION 'WWW_SET_URL'
EXPORTING
    offset        = 12
    length        = 10
    func          = fullurl
TABLES
    query_string = qstring
EXCEPTIONS
    invalid_table = 1
    OTHERS        = 2.
Thanks & Regards,
Preethi.

How to generate the BPEL interface from XSD?

I am new to the BPEL. How to generate the BPEL interface from XSD because I need the inputed payload to have a complex type instead the simple string?
Thank you

I made the following change to the xsd file, however when the input type change to emailDataType, it is underline by red color. and the bpm process, activity guide, organization become the unknown project object.
<?xml version="1.0" encoding="UTF-8"?>
<schema attributeFormDefault="unqualified"
     elementFormDefault="qualified"
     targetNamespace="http://xmlns.oracle.com/SampleBPM/SampleEmailNotification/SendEmail"
     xmlns="http://www.w3.org/2001/XMLSchema">
     <element name="process">
          <complexType>
               <sequence>
                    <element name="input" type="emailDataType"/>
               </sequence>
          </complexType>
     </element>
     <element name="processResponse">
          <complexType>
               <sequence>
                    <element name="result" type="string"/>
               </sequence>
          </complexType>
     </element>
<complexType name="emailDataType" >
<sequence>
<element name="toEmailAddress" type="string" />
<element name="ccEmailAddress" type="string" />
<element name="emailSubject" type="string" />
<element name="emailContent" type="string" />
</sequence>
</complexType>
</schema>
The XSD file is viewed by the design mode is fine on JDeveloper. Please help!

How to generate individual HTML files from linked help?

Hi folks,
I'm trying to figure out how to generate individual web pages - based on heading types - from a help project this is linked to a FrameMaker book.
I'm linking to the FM book, rather than importing, because the import process ruins my graphics. So, I know how to create individual web help pages using the import process; but that's not an option for me. (The graphics issue is a whole other discussion, which I've since given up on.)
So, I'm using TCS 3.5 (RH9 and FM10). I've successfully linked to the FM book. Each topic represents a complete chapter and includes a single Heading 1 for the title and several Heading 2's. Again, these are all in the same help topic because I'm linked to the FM book.
What I want to do is generate the web help so that new web pages (files) are created. In other words, I want breaks before each Heading 2. I want the resulting web pages to be named based on the Heading 2.
Is this possible?
Thanks for reading,
Tom

I’m not sure I understand the problem (I’m using FM 10, RH9, TCS3): You can adjust .isf and all Conversion/CSS mapping, etc settings for an existing project (Linked or Imported) at:
File > Project Settings > FrameMaker Document > Edit Conversion settings for FrameMaker documents: (click Edit button).
Then, Go to FrameMaker Settings > Paragraph > Heading 1 etc. and click the box for Pagination.
What I don’t know is if you have to re-do your linking process from scratch to do your pagination settings right the first time (like create a new project with your Frame docs, which shouldn’t be hard to test if you have saved your CSS, Master Pages etc), or already have an .isf file with proper settings that you can specify at time of first import/linking. I already had these in place when I set up my linked project of a Frame book with 13 chapters – 350 pages – resulting in over 300 separate HTML files/topics (set H1, H2, and H3 levels to paginate). I don’t know if you can change these things post-linking, but it can definitely be done!
There is definitely no reason to have to have an entire FM chapter as one topic in RH. You may have to create a new project to achieve your desired results, I am not sure.
I hope this is helpful. Regarding RH ruining your images, I know what you mean. Through a painstaking process of research, trial, and error, I found that these Image options in the Conversion Settings produced the best results for me, though not as good as “ideal:”
·         Check the box for “Use Distiller to Generate Image”
·         Leave the “Do Not Regenerate Images” and “Preserve 3D Images” boxes unchecked
·         Under Preferred Dimensions: Check “Maintain Aspect Ratio” and check Width and Height – Set both to 0pt. (*This one was a key tip.) Leave “Scale” unchecked. (Scaling seems to do terrible things in RH.)
·         I left the Max Dimensions settings unchecked.
·         Set my personal preferences for margins (2pt all sides) and borders (solid, gray, 1 pt)
·         Under Advanced, Default format of PNG with color bit depth of 24. My graphics are all screenshots, so this is the reason for this in my instance.
Regards,
Virginia

Is there a way to automate generating the documentation from a function panel?

We have some DLL projects which contain function panel (.fp) files. We link a help file to the DLL so that we can call up the help file when using TestStand. As part of the build, we have to manually run Options -> Generate Documentation -> HTML. Then we load the .hhp file into the Microsoft tool HTML Help Workshop and select File -> Compile to generate a .chm file. Then in LabWindows/CVI we can build our DLL with links to the .chm help file.
Has anyone been able to automate this? It seems like it would be convenient to generate the help file in the Pre-build actions section of the Build Steps for the project.
Note: this slightly more convoluted process of generating the .chm file replaces the old method of generating a .hlp file from within LabWindows/CVI.
Solved!
Go to Solution.

Thanks, Luis. After generating the ActiveX interface to the CVI server, I was able to write a small command line program that calls GenHtmlHelpFromFPFile.
To generate the .chm file from the .hhp file, there's an executable provided by the HTML Help Workshop (hhc.exe). It only seems to work if you run it from the HTML Help Workshop directory, though. We have the following Build Steps:
cd "C:\Program Files\HTML Help Workshop"
hhc.exe %CVIPROJDIR%\name_of_fp_file.fp

How can generate an unsigned apk from FB 4.6?

Hi, i just finish the development of an Flex-AIR app for Android. The build possibilities are signed APK and unsigned AIRI file (plus desktop air versión). The fact is that the client needs the apk unsigned so they can sign it with their own digital signature. They don´t want to use the adt option to sign the AIRI file. Is there any way to generate an unsigned apk from FB 4.6 or in Eclipse with the FB4.6 plugin?
Thanks a lot.

FlashBuilder (doesn't matter what version) screws this up all the time. There are so many files related to configuration of the workspace, the projects within the workspace and the eclipse environment that it gets messed up all the time.
I never have this problem in other editors Eclipse based editors like InteliJ, Aptana, FDT etc. It's just Adobe growing / extending a tool which has bad programming in it and not bothering to go back and fix the root of the problem before expanding on it. FlashBuilder doesn't get the attention it deserves from Adobe. If they are not careful in the not too distant future when WebGL is supported on all the major web browsers and tools are released to translate WebGL to OpenGL ES iOS and Android applications AIR might see itself becoming a thing of the past. Esepcially when the tools can't even save the state of the projects they themselves created correctly.

How to call labview DLL from C#, passing char, char[], float[], long, short

Hi,
I'm having trouble calling labview dll from C# to perform certain function.
The function supposed to return the values in the float Analysis[] array. However, when I execute it it only returns zero values.
It seems that some parameters are not properly passed to the dll.
Below is the function in the header file:
void __stdcall Optical_Center(char FileDirectory[], long ImagePtr,
    short int Height, short int Width, char ReadFromFile, float Analysis[],
    long lenAnalysis);
and my corresponding dll import in c#:
[DllImport(@"SMIA.dll", CharSet = CharSet.Ansi)]
        public static extern void Optical_Center([MarshalAs(UnmanagedType.LPStr)]string FileDirectory, long ImagePtr,
            short Height, short Width,char ReadFromFile, IntPtr Analysis,
            long lenAnalysis);
string str = @"C:\SMIA.raw";
int len = 3;
long m_lenAnalysis = 3;
long m_ImagePtr = 0;
short m_Height = 2464;
short m_Width = 3280;
IntPtr m_PtrArray = Marshal.AllocHGlobal(len * Marshal.SizeOf(typeof(float)));
char m_ReadFromFile = '1';
Optical_Center(str,m_ImagePtr,m_Height,m_Width,m_ReadFromFile,m_PtrArray,m_lenAnalysis);
float[] m_Analysis = new float[len];
Marshal.Copy(m_PtrArray, floatArray,0,len);
Marshal.FreeHGlobal(m_PtrArray);
string printstr = "";
for (int i=0; i<len; i++)
    printstr = printstr + floatArray[i].ToString() + "\n";
MessageBox.Show(printstr);
Appreciate if anyone can help, thanks.
KL

I was just about to post the header file of the DLL, when
I noticed that there's a function called LVDLLStatus.
This little thingie turned out to be a rather handy tool.
With that function I found that in the DLL I had a problem
with another function that prevented the DLL to be correctly
loaded.
This other function in the DLL is for generating digital output
and it worked as it should, when tested from LV.
Anyway if someone is interested, I got it working by using
the LoadLibrary and GetProcAddress function, as in the
source code thatI posted earlier.
I will investigate what is wrong with that digital output, and
post into a another thread if I have problems with that.

How to call Labview DLL from VB2005

Dear all expert,
I'm a student and very new in Labview programming.
Currently i have build a simple vi and need to convert it to dll so that i can call it from my VB.net. But the problem is how to call the labview dll from my VB.net?
I know we must declare function something like this,
Auto function Bodeplot Lib"..\\Bodeplot.dll" (Byval Val1 as double, Byval Val2 as double,...) as double
but how to determine Val1, Val2 (and so on) is input for which data? if my vi have 10 input (frequency, Kc,Fcz,Fcp,Wzrhp,Wp,k,Wz,Beta and Operation) ? and how to select the output (my application have 3 possible output : magnitup loop,phase loop, and degree loop)
In addition, since I'm using Labview 8.0 , and as i know apllication builder for this version cannot convert vi to dll which contain Mathscript (but unfortunely, my vi all use Mathscript), so really hope someone can help me to convert my vi to dll using Labview 8.2 (which remove this limitation).
here I'm attach my Vi and really hope someone willing to help.
Thank you.
Attachments:
bodeplot.vi ‏1049 KB

On Sep 17, 6:40 am, cckoh <[email protected]> wrote:
> Dear all expert,
> I'm a student and very new in Labview programming.
> Currently i have build a simple vi and need to convert it to dll so that i can call it from my VB.net. But the problem is how to call the labview dll from my VB.net?
>  
> I know we must declare function something like this,
>  
> Auto function Bodeplot Lib"..\\Bodeplot.dll" (Byval Val1 as double, Byval Val2 as double,...) as double
>  
> but how to determine Val1, Val2 (and so on) is input for which data?  if my vi have 10 input (frequency, Kc,Fcz,Fcp,Wzrhp,Wp,k,Wz,Beta and Operation) ? and how to select the output (my application have 3 possible output : magnitup loop,phase loop, and degree loop)
>  
> In addition, since I'm using Labview 8.0 , and as i know apllication  builder for this version cannot convert vi to dll which contain Mathscript (but unfortunely, my vi all use Mathscript), so really hope someone can help me to convert my vi to dll using Labview 8.2 (which remove this limitation).
>  
> here I'm attach my Vi and really hope someone willing to help.
>  
> Thank you.
>  
>
> bodeplot.vi:http://forums.ni.com/attachments/ni/170/272124/1/bodeplot.vi
If you insist on using Labview with your project then you should
consider using ActveX in place of using a dynamic link library to
interface to your VB.net code. You don't need "Application Builder"
if you use ActiveX. The Student, Basic and Full development versions
of Labview for Windows come with ActiveX capability. For more
information on ActiveX look up the subject ActiveX in Labview's Help
File.
Howard

Generate a LabVIEW VI From My SignalExpress Project

Similar Messages

Maybe you are looking for