Generate a runtime req xml from a jsp and then use existing idc webservice
Hi,
I need to write a jsp that will generate a runtime SOAP request xml intaking the paramters that I had put into the jsp and thereby take the response from the response xml , extract that and show that in a result.jsp
I will be grateful if anybody can help to do this as I am not sure how I can generate the runtime xml and thereby use the existing Idc webservices.Please help!
Hey,
Did you get info or solution?
Similar Messages
-
Can I activate iPhone 4S with a SIM from one country and then use with a SIM from another country?
I bought a factory unlocked iPhone 4S from an Apple store in the U.S. and I am in Guatemala. I want to use it now but later on I will move to New Zealand. Can I activate it with a SIM card from Guatemala and then use it with a SIM card from New Zealand? I am just wondering if it will get locked with the Guatemalan SIM card. Or does it just need a SIM from any supported carrier and then it remains unlocked to use with any other carrier? Thanks
David,
As I (mis)understand it, you may:
1) Copy one orange gradient path to the magenta gradient path document;
2) Select the two magenta gradient paths and change the Fill to None;
3) Select the orange gradient path;
4) Select the two magenta gradient paths and change the Fill to Gradient.
That should give you the desired replacement. For multiple use of the same gradient, you may consider a gradient swatch. -
I am making business cards. On the back of the cards there are two lines with gradients. Below is a card with a magenta gradient. I want to select both lines and change the magenta gradient to the orange gradient from the file below. How do I do this? (I do not want to copy a paste the orange lines and then move them over the magenta ones.) I just want to select the magenta lines and change their color to the orange gradient. This will insure absolute alignment. I want to do repeat the process with several other gradients too. Thank you.
David,
As I (mis)understand it, you may:
1) Copy one orange gradient path to the magenta gradient path document;
2) Select the two magenta gradient paths and change the Fill to None;
3) Select the orange gradient path;
4) Select the two magenta gradient paths and change the Fill to Gradient.
That should give you the desired replacement. For multiple use of the same gradient, you may consider a gradient swatch. -
Calling a pkg from managed code and then using reflection to call a method from a script task
Hi we run 2012 std. I have some pretty good evidence that when I call my pkg from a .net service, a script component in that pkg fails when trying 2 use reflection to load and invoke our .net message history method. The exception is either on
the invoke or in the message history method. I suspect its in the method but will take additional steps 2 verify.
But when I run the pkg stand alone, it has no problem and the method does what it is supposed 2 do.
There r no vars passed from the service to the pkg. I wonder if its a managed to unmanaged to managed issue that the community is already aware of. If not, my apologies 4 posting this quickly.
I'll post more info here as I collect it.we have 2 theories after showing the exception trace to folks who r more adept at managed code.
the first is related to the fact that our 3rd party dlls (I think entity framework is included in these) r older versions. I don't want to discount this theory but we have some evidence already that this might not be true.
I hope I can do justice to the 2nd theory but will make it clearer and clearer as I get a better understanding. I believe this is what Arthur was saying and I applaud his instincts. They explained that .net is so "smart" that it detected
a change in namespace (ie context as Arthur said) and purposely threw an exception 2 save us from ourselves. The workarounds discussed were a bit over my head but I will continue trying to better understand it. The fact that many of the methods
we call after reflection r now merged into one assembly seemed relevant to the discussion and possible workarounds.
this link came up in their discussion and I believe the bottom line here is that by qualifying assembly names further (in config?)r, a workaround is possible.
http://msdn.microsoft.com/en-us/library/system.type.assemblyqualifiedname(v=vs.110).aspx .
This link came up as well and has something to do with ILMerge and workarounds to ILMerge.
http://elegantcode.com/2011/04/02/dynamically-load-embedded-assemblies-because-ilmerge-appeared-to-be-out/ .
Finally, this link came up and seems to have something to do with embedding your dlls in one assembly without them losing their identity.
http://blogs.msdn.com/b/microsoft_press/archive/2010/02/03/jeffrey-richter-excerpt-2-from-clr-via-c-third-edition.aspx
I'll post more here as we muddle thru this. -
Generating XML from SQL queries and saving to an xml file?
Hi there,
I was wondering if somebody could help with regards to the following:
Generating XML from SQL queries and saving to a xml file?
We want to have a procedure(PL/SQL) that accepts an order number as an input parameter(the procedure
is accessed by our software on the client machine).
Using this order number we do a couple of SQL queries.
My first question: What would be our best option to convert the result of the
queries to xml?
Second Question: Once the XML has been generated, how do we save that XML to a file?
(The XML file is going to be saved on the file system of the server that
the database is running on.)
Now our procedure will also have a output parameter which returns the filename to us. eg. Order1001.xml
Our software on the client machine will then ftp this XML file(based on the output parameter[filename]) to
the client hard drive.
Any information would be greatly appreciated.
Thanking you,
FrancoisIf you are using 9iR2 you do not need to do any of this..
You can create an XML as an XMLType using the new SQL/XML operators. You can insert this XML into the XML DB repository using DBMS_XDB.createResource. You can then access the document from the resource. You can also return the XMLType containing the XML directly from the PL/SQL Procedure. -
Generating XML from SQL queries and saving to a xml file?
Hi there,
I was wondering if somebody could help with regards to the following:
Generating XML from SQL queries and saving to a xml file?
We want to have a stored procedure(PL/SQL) that accepts an order number as an input parameter(the procedure
is accessed by our software on the client machine).
Using this order number we do a couple of SQL queries.
My first question: What would be our best option to convert the result of the
queries to xml?
Second Question: Once the XML has been generated, how do we save that XML to a file?
(The XML file is going to be saved on the file system of the server that
the database is running on.)
Now our procedure will also have a output parameter which returns the filename to us. eg. Order1001.xml
Our software on the client machine will then ftp this XML file(based on the output parameter[filename]) to
the client hard drive.
Any information would be greatly appreciated.
Thanking you,
FrancoisHi
Here is an example of some code that i am using on Oracle 817.
The create_file procedure is the one that creates the file.
The orher procedures are utility procedures that can be used with any XML file.
PROCEDURE create_file_with_root(po_xmldoc OUT xmldom.DOMDocument,
pi_root_tag IN VARCHAR2,
po_root_element OUT xmldom.domelement,
po_root_node OUT xmldom.domnode,
pi_doctype_url IN VARCHAR2) IS
xmldoc xmldom.DOMDocument;
root xmldom.domnode;
root_node xmldom.domnode;
root_element xmldom.domelement;
record_node xmldom.domnode;
newelenode xmldom.DOMNode;
BEGIN
xmldoc := xmldom.newDOMDocument;
xmldom.setVersion(xmldoc, '1.0');
xmldom.setDoctype(xmldoc, pi_root_tag, pi_doctype_url,'');
-- Create the root --
root := xmldom.makeNode(xmldoc);
-- Create the root element in the file --
create_element_and_append(xmldoc, pi_root_tag, root, root_element, root_node);
po_xmldoc := xmldoc;
po_root_node := root_node;
po_root_element := root_element;
END create_file_with_root;
PROCEDURE create_element_and_append(pi_xmldoc IN OUT xmldom.DOMDocument,
pi_element_name IN VARCHAR2,
pi_parent_node IN xmldom.domnode,
po_new_element OUT xmldom.domelement,
po_new_node OUT xmldom.domnode) IS
element xmldom.domelement;
child_node xmldom.domnode;
newelenode xmldom.DOMNode;
BEGIN
element := xmldom.createElement(pi_xmldoc, pi_element_name);
child_node := xmldom.makeNode(element);
-- Append the new node to the parent --
newelenode := xmldom.appendchild(pi_parent_node, child_node);
po_new_node := child_node;
po_new_element := element;
END create_element_and_append;
FUNCTION create_text_element(pio_xmldoc IN OUT xmldom.DOMDocument, pi_element_name IN VARCHAR2,
pi_element_data IN VARCHAR2, pi_parent_node IN xmldom.domnode) RETURN xmldom.domnode IS
parent_node xmldom.domnode;
child_node xmldom.domnode;
child_element xmldom.domelement;
newelenode xmldom.DOMNode;
textele xmldom.DOMText;
compnode xmldom.DOMNode;
BEGIN
create_element_and_append(pio_xmldoc, pi_element_name, pi_parent_node, child_element, child_node);
parent_node := child_node;
-- Create a text node --
textele := xmldom.createTextNode(pio_xmldoc, pi_element_data);
child_node := xmldom.makeNode(textele);
-- Link the text node to the new node --
compnode := xmldom.appendChild(parent_node, child_node);
RETURN newelenode;
END create_text_element;
PROCEDURE create_file IS
xmldoc xmldom.DOMDocument;
root_node xmldom.domnode;
xml_doctype xmldom.DOMDocumentType;
root_element xmldom.domelement;
record_element xmldom.domelement;
record_node xmldom.domnode;
parent_node xmldom.domnode;
child_node xmldom.domnode;
newelenode xmldom.DOMNode;
textele xmldom.DOMText;
compnode xmldom.DOMNode;
BEGIN
xmldoc := xmldom.newDOMDocument;
xmldom.setVersion(xmldoc, '1.0');
create_file_with_root(xmldoc, 'root', root_element, root_node, 'test.dtd');
xmldom.setAttribute(root_element, 'interface_type', 'EXCHANGE_RATES');
-- Create the record element in the file --
create_element_and_append(xmldoc, 'record', root_node, record_element, record_node);
parent_node := create_text_element(xmldoc, 'title', 'Mr', record_node);
parent_node := create_text_element(xmldoc, 'name', 'Joe', record_node);
parent_node := create_text_element(xmldoc,'surname', 'Blogs', record_node);
-- Create the record element in the file --
create_element_and_append(xmldoc, 'record', root_node, record_element, record_node);
parent_node := create_text_element(xmldoc, 'title', 'Mrs', record_node);
parent_node := create_text_element(xmldoc, 'name', 'A', record_node);
parent_node := create_text_element(xmldoc, 'surname', 'B', record_node);
-- write the newly created dom document into the buffer assuming it is less than 32K
xmldom.writeTofile(xmldoc, 'c:\laiki\willow_data\test.xml');
EXCEPTION
WHEN xmldom.INDEX_SIZE_ERR THEN
RAISE_APPLICATION_ERROR(-20120, 'Index Size error');
WHEN xmldom.DOMSTRING_SIZE_ERR THEN
RAISE_APPLICATION_ERROR(-20120, 'String Size error');
WHEN xmldom.HIERARCHY_REQUEST_ERR THEN
RAISE_APPLICATION_ERROR(-20120, 'Hierarchy request error');
WHEN xmldom.WRONG_DOCUMENT_ERR THEN
RAISE_APPLICATION_ERROR(-20120, 'Wrong doc error');
WHEN xmldom.INVALID_CHARACTER_ERR THEN
RAISE_APPLICATION_ERROR(-20120, 'Invalid Char error');
WHEN xmldom.NO_DATA_ALLOWED_ERR THEN
RAISE_APPLICATION_ERROR(-20120, 'Nod data allowed error');
WHEN xmldom.NO_MODIFICATION_ALLOWED_ERR THEN
RAISE_APPLICATION_ERROR(-20120, 'No mod allowed error');
WHEN xmldom.NOT_FOUND_ERR THEN
RAISE_APPLICATION_ERROR(-20120, 'Not found error');
WHEN xmldom.NOT_SUPPORTED_ERR THEN
RAISE_APPLICATION_ERROR(-20120, 'Not supported error');
WHEN xmldom.INUSE_ATTRIBUTE_ERR THEN
RAISE_APPLICATION_ERROR(-20120, 'In use attr error');
WHEN OTHERS THEN
dbms_output.put_line('exception occured' || SQLCODE || SUBSTR(SQLERRM, 1, 100));
END create_file; -
I want to use ODI to read XML messages from JMS queue and then process it..
I want to use oracle ODI (Oracle Data Integrator) to read XML messages from JMS queue and then process it.. i also want to process and validate the data in it....
Could anyone please tell me the steps to achieve the same. I tried some ways which i got on OTN, but not able to implement it exactly...
As i m very new to ODI, it will be great if you provide detailed steps..
Thanks in advance for your help....Hi,
Were you able to do it? We are facing this same issue now and, despite the fact the docs say otherwise, it does not seem to be a trivial task.
TIA,
Tedi -
I want to send a response from the servlet and then call another servlet.
Hi,
I want to send a response from the servlet and then call another servlet. can this happen. Here is my scenario.
1. Capture all the information from a form including an Email address and submit it to a servlet.
2. Now send a message to the browser that the request will be processed and mailed.
3. Now execute the request and give a mail to the mentioned Email.
Can this be done in any way even by calling another servlet from within a servlet or any other way.
Can any one Please help me out.
Thanks,
RameshMaybe that will help you (This is registration sample):
1.You have Registration.html;
2.You have Registration servlet;
3.You have CheckUser servlet;
4.And last you have Dispatcher between all.
See the code:
Registration.html
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<HTML>
<HEAD>
<TITLE>Hello registration</TITLE>
</HEAD>
<BODY>
<H1>Entry</H1>
<FORM ACTION="helloservlet" METHOD="POST">
<LEFT>
User: <INPUT TYPE="TEXT" NAME="login" SIZE=10><BR>
Password: <INPUT TYPE="PASSWORD" NAME="password" SIZE=10><BR>
<P>
<TABLE CELLSPACING=1>
<TR>
<TH><SMALL>
<INPUT TYPE="SUBMIT" NAME="logon" VALUE="Entry">
</SMALL>
<TH><SMALL>
<INPUT TYPE="SUBMIT" NAME="registration" VALUE="Registration">
</SMALL>
</TABLE>
</LEFT>
</FORM>
<BR>
</BODY>
</HTML>
Dispatcher.java
package mybeans;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.ServletException;
import java.io.IOException;
import javax.servlet.RequestDispatcher;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class Dispatcher extends HttpServlet {
protected void forward(String address, HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException {
RequestDispatcher dispatcher = getServletContext().
getRequestDispatcher(address);
dispatcher.forward(request, response);
Registration.java
package mybeans;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class Registration extends Dispatcher {
public String getServletInfo() {
return "Registration servlet";
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
ServletContext ctx = getServletContext();
if(request.getParameter("logon") != null) {
this.forward("/CheckUser", request, response);
else if (request.getParameter("registration") != null) {
this.forward("/registration.html", request, response);
CheckUser.java
package mybeans;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.sql.*;
public class CheckUser extends Dispatcher {
Connection conn;
Statement stat;
ResultSet rs;
String cur_UserName;
public static String cur_UserSurname;;
String cur_UserOtchestvo;
public String getServletInfo() {
return "Registration servlet";
public void service(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
try{
ServletContext ctx = getServletContext();
Class.forName("oracle.jdbc.driver.OracleDriver");
conn = DriverManager.getConnection("jdbc:oracle:oci:@eugenz","SYSTEM", "manager");
stat = conn.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
String queryDB = "SELECT ID, Login, Password FROM TLogon WHERE Login = ? AND Password = ?";
PreparedStatement ps = conn.prepareStatement(queryDB);
User user = new User();
user.setLogin(request.getParameter("login"));
String cur_Login = user.getLogin();
ps.setString(1, cur_Login);
user.setPassword(request.getParameter("password"));
String cur_Password = user.getPassword();
ps.setString(2, cur_Password);
Password = admin");
rs = ps.executeQuery();
String sn = "Zatoka";
String n = "Eugen";
String queryPeople = "SELECT ID, Surname FROM People WHERE ID = ?";
PreparedStatement psPeople = conn.prepareStatement(queryPeople);
if(rs.next()) {
int logonID = rs.getInt("ID");
psPeople.setInt(1, logonID);
rs = psPeople.executeQuery();
rs.next();
user.setSurname(rs.getString("Surname"));
FROM TLogon, People WHERE TLogon.ID = People.ID";
ctx.setAttribute("user", user);
this.forward("/successLogin.jsp", request, response);
this.forward("/registration.html", request, response);
catch(Exception exception) {
}CheckUser.java maybe incorrect, but it's not serious, because see the principe (conception).
Main is Dispatcher.java. This class is dispatcher between all servlets. -
How to run jsp and servlet using JBOSS server
Dear Friend,
I have JBoss application server and Eclipse id
now i want to run JSP and Servlet but i am not getting the place where to place my servlet class file to run it .
before that i run jsp and servlet using tomcat5.0 but in that i place my servlet class in WEB-INF/classes folder and do corresponding entry in web.xml file and run it through browser.
now i want to use JBOSS how it is possible
PLZ Help meIs the servlet class defined in a package.? If servlet class package is servlets., copy the servlet to
WEB-INF/classes/servlets directory. -
My wife and I have an iphone each using one apple id. How do we stop phone contacts being deleted from one phone and then find it has been deleted from the other?
Also this works when one of us downloads an app it appears on the other iphoneYou need to use separate iCloud accounts. This will mean that you can both have your own separate contracts and calendars and put an end to them being deleted by each other.
Whether or not you have a separate iTunes account, is up to you. If you have a separate iTunes accounts you will not be able to access the music, books, apps that have been purchased by the other. This may be exactly what you want, but it also means that you both may end up purchasing the same item. -
I want to delete my credit card from my account and only use gift cards. How can I delete my card number?
You'll want to get in touch with ITunes support for this. Normally when you start an account with the CC you can't remove it yourself. But by contacting iTunes they can get that taken off for you.
Use this link to get in touch with the iTunes advisors
http://www.apple.com/lae/support/itunes/contact.html -
How can I get my iPad to play just one song from my playlist and then stop automatically?
I am a music teacher and I use the iPod on my iPad to play songs in class. I have a long playlist of songs to choose from in each class, and I want to play just one song at a time. I want to be able to start one song from my playlist and then walk away from my iPad and have it stop automatically when that song is over. (I know how to make it repeat the same song over and over, but tha'ts not what I need. I also know how to push "pause," but I don't want to have to walk away from the children to do it.) How can I make it play one song from a playlist at a time?
I don't believe that there is a way to do that except, perhaps, creating a separate Playlist for each song.
Suggestions for features to Apple at: http://www.apple.com/feedback/ipad.html -
I installed Firefox sync and then used iphone app called FireFox Home and I can syncronize history, tabs and bookmarks. But I am NOT able to syncronize passwords from Firefox in my Macbook to FireFox Home on iPhone so I am very terrible to input my IDs and Passwords with my hands on FireFox Home when I log into Facebook, Twitter etc... Is it issue or something like that? If you have some solutions to make it clear, can you tell me how to syncronize memorized IDs and Passwords for the webs. Thank you.
You can look in Tools > Options > Sync
Menu differences: [http://kb.mozillazine.org/Menu_differences Windows: Tools > Options - Mac: Firefox > Preferences - Linux: Edit > Preferences]
See also:
* [[What is Firefox Sync]]
* [[How to sync Firefox settings between computers]]
* [[How to sync Firefox between my desktop and mobile]] -
How to read two text files using the Read from spreadsheet.vi and then plot it
I need to read two text files using the read from spreadsheet function and then plot these files over time.
The file with the .res extention is the RMS values (dt and df) and the second file contains the amplitude of a frequency spectrum.
I really appreciate any help..thanks
Attachments:
RMS.txt 1 KB
FREQUENCY.txt 1 KBFrom NI Example Finder:
Write to Text File.vi
Read from Text File.vi
Jean-Marc
LV2009 and LV2013
Free PDF Report with iTextSharp -
How can I remove a person's face from a photo and then replace the spot with a person's face from another photo?
In Editor, go to the expert tab.
Open picture B, the one you wish to select the "replacement" face from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the face. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position the face from picture B to cover the face on A
In the layers palette you should see picture A as the background layer, and face B on a separate layer
Maybe you are looking for
-
How do I save my Home sharing details on Apple TV. It resets each time I leave COMPUTER ...
How do I save my Home sharing details on Apple TV. It resets each time I leave COMPUTER ...
-
Hi, I'm just about getting to grips with Numbers, but I'm stumped at the moment with this problem. I want to show zero at the top on the (y) axis, as zero is the goal and 100 is the starting point? can it be done? i would really appreicate some help
-
Human Task Flow conflict on Data Controls generation
Hi, I have two distinct human tasks in one process. When I use new-> JSF-> ADF task flow from Human task to create the task flow for the second task to the same public-html/web-INF folder as the first one, after the generation, the data control for t
-
Facetime not working since upgrading to IOS6
My facetime doesn't connect to any contacts since upgrading to IOS6
-
Nv driver has no 3d support: What exactly am I giving up?
I am currently running arch on a system with an nvidia graphics card using the latest proprietary driver, but I would like to know what I would be missing if I used the "nv" driver instead. I know the nv driver has no 3D support, but what exactly doe