Generate GS1-XML standard file

Hello Dear,
I am using 10g Database R2. i want to generate GS1-XML file from a master-detail tables.
is there any example or help for this problem.
I shall be thankfull,
Best Regards,
Zafar Iqbal

Basically, XML config file for this SPA3102 can be generated using SPC tool software (Profile
compiler). However, I think this tool is only available from your Value Added Reseller or from your VoIP.Thanks.

Similar Messages

How to generate an XML Configuration File for EBS Source Type

Hi,
We have installed SES, I want to integrate it to enable for searching repository contracts.
In the sources I have selected oracle.apps.okc.repository.textsearch.server.RepHeaderSearchExpVO.
For this source I need to specify the Configuration URL.
Here I need to provide the path for configuration XML file. But before that I need to generate the XML Configuration file.
Is there any steps on how we can create this XML file.
like I would want to know how we can create the XML file and on which folder on the server should I be putting it
Thanks

Hi there,
We are running into same issue and need the exact same information. Can someone help with this question on priority?
Thanks,
Darshan

Generate a xml config file for SPA3102

Hi everyone,
I'm trying to create a xml config file for my SPA3102
I tried http://<phone -or- device ip address>/admin/spacfg.xml
to generate the xml but i had a 404 Not Found !
web page so i'm searching a solution to generate a config file from the existing configuration
I don't want to generate 2 html files for voice and router
can you help me ?

Basically, XML config file for this SPA3102 can be generated using SPC tool software (Profile
compiler). However, I think this tool is only available from your Value Added Reseller or from your VoIP.Thanks.

Generate xml source file for Oracle Order Capture Print Quote

Hi,
I am new to xml and need to work on creating templates for Print Quote.
I am trying to generate the xml source file for which I enabled the report in system administrator and set the output to XML and assigned to Quoting Reports responsiblity. I then assigned XML Report Publisher to the same responsiblity.
I ran the report (Print Quote) and then I am trying to run the XML Report Publisher but I cannot get the request id in the list of values.
I am able to generate xml source file for other reports like Printed Purchase Order etc.,
The view output for the (Print Quote) report is as follows:
<?xml version="1.0" ?>
- 
<ASOPQTER />
How do I get the xml source file? Or are there seeded templates that I can use to create more templates? Any help would be appreciated. Thanks Ravi

Hi, I am in the same position - did this issue ever ger resolved by anyone. I have done a few XMLP reports successfully now using the Word add-in, but customising the Quote output differs from other standard reports.
If you look at the data definition for Quote it is a 'dummy' definition and has no XML file attached. Does anyone know how I can get the XML format for the report output?
Also the template uses XSL-FO ?!?!?! rather than RTF - not sure how to work with this, the Oracle docs are not very helpful in this regard either.
Has anyone successfully managed to customise the Quote print report? Many thanks,
Roger

Generated XML doc file contains comments from MFC source code

Hello, in my project I use the option /doc to generate XML doc file from my source codes but unfortunately in the output XML file there are mixed also comments from original MFC source codes, see the part of generated xml file:
Is there a solution to ignore these MFC cpp files?
Many thanks
Regards
Petr Stejskal
<?xml version="1.0"?>
<style xmlns="http://www.w3.org/1999/xhtml">@namespace html url(http://www.w3.org/1999/xhtml); :root { font:small Verdana; font-weight: bold; padding: 2em; padding- } * { display: block; padding- } html|style { display: none; } html|span, html|a
{ display: inline; padding: 0; font-weight: normal; text-decoration: none; } html|span.block { display: block; } *[html|hidden], span.block[html|hidden] { display: none; } .expand { display: block; } .expand:before { content: '+'; color: red; } .collapse
{ display: block; } .collapse:before { content: '-'; color: red; } </style><doc><assembly><assembly>
"Console" </assembly></assembly><members><members><member name="T:_RS"><member
name="T:_RS">Reed-Solomon codec control block</member></member><member name="M:MMask_makeMask(System.Int32,System.Byte*,System.Int32,QRecLevel)"><member
name="M:MMask_makeMask(System.Int32,System.Byte*,System.Int32,QRecLevel)">Mode indicator. See Table 2 in Appendix 1 of JIS X0510:2004, pp.107.</member></member><member
name="M:CMFCControlRenderer.IsScaled"><member
name="M:CMFCControlRenderer.IsScaled"><summary><summary>Tells whether this control
renderer works with scaled (resized) images.</summary></summary><returns><returns>Returns TRUE if this control
renderer works with resized (scaled) images.</returns></returns></member></member><member name="M:CMFCControlRenderer.SmoothResize(System.Double)"><member
name="M:CMFCControlRenderer.SmoothResize(System.Double)"><summary><summary>
Smoothly resizes images.</summary></summary><param name="dblScale" /><param
name="dblScale"> Scale ratio.</param><returns><returns>
TRUE if resize succeeds; otherwise FALSE.</returns></returns></member></member><member name="M:CDrawingManager.CreateBitmap_32(HBITMAP__*,System.UInt32!System.Runtime.CompilerServices.IsLong)"><member
name="M:CDrawingManager.CreateBitmap_32(HBITMAP__*,System.UInt32!System.Runtime.CompilerServices.IsLong)"><summary><summary>
Creates a 32 bit bitmap from the specified bitmap.</summary></summary><returns><returns> A handle to created
bitmap, or NULL, if creation fails.</returns></returns><param name="bitmap" /><param
name="bitmap"> A handle to the original bitmap.</param><param name="clrTransparent"
/><param
name="clrTransparent"> An RGB value specifying transparent color of the original bitmap.</param></member></member><member
name="M:CDrawingManager.CreateBitmap_32(CSize!System.Runtime.CompilerServices.IsConst*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Void**)"><member
name="M:CDrawingManager.CreateBitmap_32(CSize!System.Runtime.CompilerServices.IsConst*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Void**)"><summary><summary>
Creates an empty 32 bit bitmap.</summary></summary><returns><returns> A handle to created bitmap, or NULL,
if creation fails.</returns></returns><param name="size" /><param
name="size">Specifies bitmap size.</param><param name="pBits" /><param
name="pBits">When the function returns contains a pointer to bitmap bits.</param></member></member><member
name="M:CDrawingManager.DrawRotated(CRect,CDC*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Int32)"><member
name="M:CDrawingManager.DrawRotated(CRect,CDC*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Int32)"><summary><summary>Rotates
a source DC content inside the given rectangle by +/- 90 degrees</summary></summary><param name="rectDest" /><param
name="rectDest">Destination rectangle</param><param name="dcSrc" /><param
name="dcSrc">The source device content.</param><param name="bClockWise"
/><param
name="bClockWise">TRUE - rotate +90 degrees, FALSE - 90.</param></member></member><member
name="M:AfxRegDeleteKey(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,ATL.CAtlTransactionManager*)"><member
name="M:AfxRegDeleteKey(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,ATL.CAtlTransactionManager*)"><summary><summary>Deletes
the specified registry key.</summary></summary><returns><returns> If the function succeeds, the return
value is ERROR_SUCCESS. If the function fails, the return value is a nonzero error code defined in Winerror.h</returns></returns><param name="hKey" /><param
name="hKey">A handle to an open registry key.</param><param name="lpSubKey"
/><param
name="lpSubKey">The name of the key to be deleted.</param><param name="pTM" /><param
name="pTM">Pointer to CAtlTransactionManager object</param></member></member><member
name="M:AfxRegOpenKeyEx(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,System.UInt32!System.Runtime.CompilerServices.IsLong,System.UInt32!System.Runtime.CompilerServices.IsLong,HKEY__**,ATL.CAtlTransactionManager*)"><member
name="M:AfxRegOpenKeyEx(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,System.UInt32!System.Runtime.CompilerServices.IsLong,System.UInt32!System.Runtime.CompilerServices.IsLong,HKEY__**,ATL.CAtlTransactionManager*)"><summary><summary>Opens
the specified registry key.</summary></summary><returns><returns> If the function succeeds, the return
value is ERROR_SUCCESS. If the function fails, the return value is a nonzero error code defined in Winerror.h</returns></returns><param name="hKey" /><param
name="hKey">A handle to an open registry key.</param><param name="lpSubKey"
/><param
name="lpSubKey">The name of a key that this function opens or creates.</param><param name="ulOptions"
/><param
name="ulOptions">This parameter is reserved and must be zero.</param><param name="samDesired" /><param
name="samDesired">A mask that specifies the desired access rights to the key.</param><param
name="phkResult" /><param
name="phkResult">A pointer to a variable that receives a handle to the openedkey.</param><param
name="pTM" /><param
name="pTM">Pointer to CAtlTransactionManager object</param></member></member></members>

Hi stejsky,
Thank you for posting in MSDN forum.
>>In my project I use the option /doc to generate XML doc file from my source codes but unfortunately in the output XML file there are mixed also comments from original MFC source codes.
Based on your issue, could you please tell me how you use the option /doc to generate XML doc file from your source codes?
If you use the option /doc to generate the XML doc file by right-click the your MFC project->Properties->Configuration Properties->C/C++->Output file->set the Generate XML document files as Yes(/doc) like the following screen shot.
(1)If yes, since we could not reproduce your issue in mu side, so if possible, I suggest you could share me your MFC project so that we will further help you support this issue.
You could upload your MFC project to the OneDrive and then copy link here.
(2)If no, please try the above way to generate XML doc file and then check if you still get same issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem generating XML data file through XSD

Hello there,
I'm trying to generate an XML data file as per the below steps:
Making a normal schema in query transform.
Mapping desired source column into query schema.
Right click on query transform and generating XML schema (XSD) in my local system.
In object library XML file format adding the XSD with schema as a root element.
Creating target instance from object library XML file.
In target file specifying file creation path in my local system.
After performing above steps and executing the job getting below error.
Any help on this will be much appreciated.
Regards,
Jagari

I found some code looking at a similar issue - I don't know how to recover other data (in I guess) the rest of the HTML in the code. I need to find a better reference with details and examples.
I fixed it by changing:
ssDebug.trace(moreStuff.xliff.file.body.trans-unit); // - error
to:
ssDebug.trace(moreStuff.file.body['trans-unit']); //- no error
with expected output (no error):
<trans-unit id="001" resname="IDS_ZXP7_JAM_01">
<source>If, while you are printing, your printer stops, ...</source>
</trans-unit>
<trans-unit id="002" resname="IDS_ZXP7_JAM_02">
<source>look at the Operator Control Panel (OCP) for the fault description.</source>
</trans-unit>
<trans-unit id="003" resname="IDS_ZXP7_JAM_03">
<source>If the fault is a card jam, open and close the Print Cover (or Options Cover).</source>
</trans-unit>
<trans-unit id="004" resname="IDS_ZXP7_JAM_04">
<source>The printer will initialize and move the jammed card to the Reject Bin.</source>
</trans-unit>
<trans-unit id="005" resname="IDS_ZXP7_JAM_TITLE">
<source>Card Jam</source>
</trans-unit>

How to calculate number of data records in a XML output file

Hi,
After generating a XML output file from Oracle Reports, I want to calculate number of records in the XML file. Is it possible? Specifically, I want to calculate number of records for a group variable ( organization_id, which I use for bursting).
Thanks for the help.

Thanks BIPuser. It is useful for me.
I can use this xsl function within the template. However, I'm also looking to print this in the concurrent request log file. So, outside of rtf template, id there any PL/SQL based XML functions I can use to count the number of records.
Thanks.

Converting ISO20022 XML Payment file to PAYEXT iDoc using PI 7.1

Hi All,
As per my requirement : R/3 generates ISO20022 XML Payment file . PI will pick the file and converts into PAYEXT Idoc and send back to the same R/3.
I have some doubts regarding this...
1)Is ISO20022 XML Payment file also like normal xml file in R/3 OR different.
2) Can we use file adapter to pick the file.
3)Any modules required in CC.
4)Can I go with normal file to Idoc scenario.
Thanks
Drumi

solved

Filling PDF Form with XML data file

Hello everybody.
I need help.
I created a form with LiveCycle Designer. I filled it and generated a XML data files. Now, I would like to fill the same blank PDF form with this XML data file.
I know that I can do it with Adobe 8.0 but I must do it in an C# / .NET application that I have to create.
(Forms I'm creating are not for me, I create the forms. Client uses them form but he don't have Adobe Acrobat 8.0, so he can't realise the automatic PDF filling with Adobe Acrobat 8.0)
So I am looking for help with ".NET" "COM" or other library to help me to do it. If someone has other idea just give it.
Thanks for your reply
Jean Pierre (sorry for my bad English)

Hello Mike
Thank's for your reply. I used XPAAJ and it works very well but my company his develloping software with C# langage.
I tried to convert XPPAJ to C#, I did it with the Java Langage Conversion Assistant but "Adobe Library" included in jar files cannot be translated to C#/.NET library. So, I can't use it.
I found some C#/.NET API on the NET but they are very expensive and my company don't want to pay. They want me to create my own solution with library given by Adobe when you buy Adobe 8. So I am looking for this library.
Is there an Adobe LiveCycle Designer SDK to help me.
Thank you in advance for your reply
Jean Pierre (student developing with LiveCycle Designer)

The XML data file

This seems to be one of the few posts that never gets attention ...Hmmm I wonder why ? Help Appreciated !! Using Lifecycle 8, with out Reader Extensions, the email submit button generates an XML output file such as the following; <?xml version="1.0" encoding="UTF-8"?> <FormName> <Position>thwrth</Position> <Division>arthar</Division> <DepartmentUnit>rthqrth</DepartmentUnit> </FormName> How can I get the following reference included as line 2 of the output xml file ? <?xml-stylesheet type="text/xsl" href="SR.xsl"?>

I have a vital form that clients fill out, which is passed to many people in the company along the workflow. The form is a Planner and we have in the following PDF, Word Doc..
Well before, the Planner.pdf was originally created in Word, since most people have access to Word.. but evolved to a PDF form created from the Word Doc via Adobe LiveCycle Designer 8.0 w/ User Rights enabled so that the form could be filled out and saved using Adobe Reader.. which was a step better than Word.. being that it is free. But this needed to be easier and more to the point b/c some clients don't particularly like installing the latest version of Reader, even if you provide them the link. Nor do they like saving the form, filling the form, and attaching the form to send back.
My goal is to have the client fill an HTML version of the form, submit and be done with it, but everyone in the workflow be able to easily receive the filled Planner as a PDF form.
So some months ago I ran into this post Chris Trip, "Populate Livecycle PDF from mySQL database using PHP" #8, 22 Sep 2007 4:37 pm
which uses the command line Win32 pdftk.exe to merge an FDF file into an existing PDF on the remote server, and serve this to whoever.
My problem was with shared hosting and having the ability to use the Win32 pdftk.exe along with PHP which is predominantly used on Linux boxes. And we used a Linux box.
so i created the following unorthodox method, which a client fills the HTML version of the Planner, all field values are INSERTED into a table in MySQL DB, I and all filled planners that have been filled by clients to date can be viewed from a repository page where an XML file is served up of the corresponding client, but someone would have to have Acrobat Professional, to import the form data from the XML file into a blank form.. altoughh this is simple for me.. I have the PHP file already created so that when a Planner is filled and client submits. >> the an email is sent to me with a table row from the repository of the client name, #, email, and a link to d-load the XML file,
But I also have the PHP files created so that the Planner can be sent to by email to various people in the workflow with certain fileds ommitted they they do not need to see, but instead of the XML file beiong served up i need the filled PDF Planner to be served.
I can do this locally with ease on a testing server, but I am currently trying to use another host that uses cross-platform compatibility so i can use PHP and the pdftk.exe to achieve this, as that is why I am having to serve up an XML file b/c we use a Linux server for our website, and cant execute the exe.
Now that I am testing the other server (cross-platform host), just to use them to do the PDF handling (and it's only $5 per month) I am having problems with getting READ, WRITE, EXECUTE permissions..
Si guess a good question to ask is can PHP do the same procedure as the pdftk.exe, and i can eleminate it.
or how in the heck can i get this data from the DB into a blank PDF form, like i have described??
here are some link to reference
Populating a LiveCycle PDF with PHP and MySQL
http://www.andrewheiss.com/Tutorials?page=LiveCycle_PDFs_and_MySQL
HTML form that passed data into a PDF
http://www.mactech.com/articles/mactech/Vol.20/20.11/FillOnlinePDFFormsUsingHTML/index.htm l
and an example
http://accesspdf.com/html_pdf_form/

XML Output File using PLSQL

I like to generate an XML output file using the PLSQL. Can any one help with an example (using EMPand DEPT). I tried the forum but seems confusing to me...
This is URGENT so please rush!

Please refer to the following post:
page 0 security: authorization scheme not applied to other pages

The XML data file - I need to add an XSL reference line

Help Appreciated !! Using Lifecycle 8, with out Reader Extensions, the email submit button generates an XML output file such as the following; <?xml version="1.0" encoding="UTF-8"?> <FormName> <Position>thwrth</Position> <Division>arthar</Division> <DepartmentUnit>rthqrth</DepartmentUnit> </FormName> How can I get the following reference included as line 2 of the output xml file ? <?xml-stylesheet type="text/xsl" href="SR.xsl"?> Thanks a lot

If I understand correctly, Sonic Kaboom.swf needs to be edited in a separate Flash authoring program and then reinserted into your HTML document.
As Murray said, Flash is dead. Nobody uses it anymore. We use HTML5, CSS3 and JavaScript animations which have universal support from Smartphones, Tablets and other web devices that can't support Flash. Look at Edge Animate.
HTML animation | Download free Adobe Edge Animate CC trial
Nancy O.

How to get TestStand30 to generate a XML file compatible with teststand2.01

TestStand 2.01 came with an example sequence file and modelsupport.DLL that would generate XML report files. It had a particular format that was hardcoded in the DLL. Then TestStand 3.0 came allong and NI decided to put it in the standard process model and change the code that creates it. Doing so, they changed the format of the XML file. This format is now based on the file Report.XSD (XML schema file). TestStand 2.01 didnot use a XSD file. My question is, is there anybody out there that knows enough about these XSD file to creat one that would make TestStand 3.0 generate the same file format as the TestStand 2.01 did?

Hi
The XSD (XML schema file) just defines the legal building blocks of an XML document. TestStand does not modify its XML output based on changes to the XSD file.
Unfortunately, currently there is no method to make TestStand 3.0 generate a 2.0.1 format of XML output.
You can continue using the old method of generating XML reports without issues.
Hope this helps
Regards
Anand

How to generate a XML file from a XML schema...?

Hi guys...!
I have a XML schema and I want to write a XML file based on that schema. I have heard about this feature that eclipse has, which given a XML schema, can generate a XML file for you.
Does anyone of you know about this feature? or is there another way to do it. The schema that I have is very huge...
I will really appreciate any help from you guys...
Thank...you..
--- Spirit Away...

don't cross post
http://forum.java.sun.com/thread.jspa?threadID=649205&tstart=10

Generating an XML formated text file

Hi all
I am a PL/SQL programmer and have no idea about XML :-(
I am using ORACLE 10g and my application generates atleast 100 text files a day for customers. These files are manipulated using Utl_File package and gets data from the DB.These files are tab or comma delimeted. Now company wants to give an option to customers to get the same output in XML format. My understanding is that I need to get information from customers first to make the report template for them and then use some XML parser to get data from DB and give an output using that customer's specific template.
I wanna know, if there is any whitepaper or manual that can guide me step by step. I just need to make an idea how the things can go togather and the sequence of operation. I also wanna use only PL/SQL and not Java at this time.
Rashid
Message was edited by:
rashid68

check it out at http://www.orafaq.com/faqxml.htm

Generate GS1-XML standard file

Similar Messages

Maybe you are looking for