Generate SMS like a SIM application would

I am just starting to build mobile apps and after a week of googling I think java card may be what I am looking for.
I would like to write an application that sends text messages similar to what a sim application sends. The sim application prompts a user to enter a phone number a four digit pasrd and an amount. I am guessing that these are then compiled into a text message and sent to a certain number for processing.
What I need help with is figuring out what the sim application generates so that I can generate the same in my application and send the message over a gsm modem attached to a PC.
Many Thanks
David

There are dozens of similar utilities. Look for them at VersionTracker or MacUpdate.

Similar Messages

  • I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim, I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim

    I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim, I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim

    actually I found the solution :
    http://www.igeneration.fr/itunes/astuce-votre-historique-d-achats-itunes-12056
    it's in french, but the images and google translate will be enough
    hope that helps for the others having the same kinda problem

  • Is it possible to save an iPhone back up and access the files later if needed?  I have a string of text sms and iMessages that I would like to save and then delete them from my phone.  Is this possible?

    I have a string of text sms and iMessages that I would like to save and then delete them from my phone, but gain access to them later if I need them.  I prefer to have the string with the date/time stamp vs copying and pasting into a doc or text file.  Is this possible?

    Not unless you buy an app that accesses data from an iTunes backup.  Check in the app store.

  • You have inserted a sim card. would you like your blackberry

    Every time I turn my phone on it displays the messag "you have inserted a sim card. would you like your blackberry to automatically selct CDMA or GSM based on the network"
    Is there any way to stop this from displaying?
    I have my phone to auto shut off and on every day and every morning I get this message.....thanks...
    Solved!
    Go to Solution.

    Hello again,
    Thanks for you input Sydman  
    Sailsbury1, when this prompt comes up I would expect to see a "yes", "no" and a checkbox at the bottom saying something to the effect of "don't ask me this again".  If you do not check the box it will simply ask you every time you start up the device.  When this prompt comes up, does it show you this checkbox?  Does it show you more if you turn the device on its end (i.e. Can you see the checkbox then) ?
    -tg
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • I would like a different application for Stickies?

    is there a good application on apple downloads as a good replacement for Stickies? i really dont like stickies and i would really like something different. any suggestions?
    thanks...

    There are dozens of similar utilities. Look for them at VersionTracker or MacUpdate.

  • How to send sms port from Desktop applications to the Midlet?

    how to send sms port from Desktop applications to the Midlet?

    Depends on the API your SMS gateway provides, and may not even be possible. Even if you can send the SMS with a port specified, be aware that some carriers deliver the SMS without the port number, which will result in it going to the device inbox and so won't activate your MIDlet registered with the PushRegistry.
    I understand that you're working on a JavaSE application, but members who frequent the mobility forums might have more knowledge about this. Would you like me to move this thread there?
    db

  • Does iPad air have sim application?

    My iPad air, wifi & cellular, seems to have no sim application function. How can I have such function available?

    No, you do not have that functionality and cannot get it. The iPad lacks the necessary hardware to make and receive cellular calls and "regular" SMS text messages. Because of this, it is not capable of running SIM applications like GSM banking that you normally find in Settings > Telephone > SIM Applications on an iPhone. The SIM is used exclusively for data connectivity.

  • How to generate crystal report in sap application

    hi,,
    i  want to  generate crystal report  through sap application...
    How  is it possible ....?
    could you help me  in details?
    Plz  help me???????????

    STEP 1: Like any other add-on project, refer SBO UI and DI COM to your project. Initialize SBO APPLICATION object and SBO COMPANY object and listen to events. (This is standard add-on project steps)
    STEP 2: Add a Dataset to the project. This is used as a data source to your Crystal Reports. (For more information on this search for Push Technique Crystal Reports)
    STEP 3: Add a Windows Form to your Project.
    STEP 4: Add a Crystal Report Control to it.
    STEP 5: Design report based on dataset added above.
    STEP 6: Launch this Form with required parameters and selection criteria when any even happens.
    Remember there is lot stuff available on net if you search with PUSH TECHNIQUE CRYSTAL REPORT. SAP SDN has lot answers for adding Crystal Reports integration to SAP Business One Add-On.
    HTH
    B Ravi Shankar

  • Embed labview generated code with c++ gui application

    Hey everyone ,
      I am very new to labview and trying to learn it  ... but before that i wanted to make sure a doubt which i have in my mind , the problem is that i have a realtime GUI application built on c++ widgets and i want to change the existing DSP block in this application with the code generated by using the LABVIEW , i am sorry that have very
    less amount of knowledge regarding labview so i turn up with thread ... So can generate c++ code for the DSP blocks designed in labview ... if yes how and if not why . Any
    sincere help will be appreciated . And I very much apologise for any mistakes in my question .
    Thanks

    Tonph wrote:
    Thanks rolf, is it possible that i use labview to disign my DSP block only and the output be fed to my custom c++ blocks and also wxwidget GUI ... suggest some means thanks ...
    Well, have you followed the link I gave in my post? You can download an evaluation version of the add-on and try it out in LabVIEW. It generates C code, not C++, but that should be no problem, since it is very easy to call C code from a C++ application. I can't vouch for the suitability of this add-on for you, nor do I know the exact price range so that are certainly things you have to do for your own.
    As to nathans solution, that could work too. If your application is for Windows, or MacOS X, or Linux you can create a shared library from your LabVIEW code and call it as such from your C++ application.
    Personally I would find it a rather roundabout way to include LabVIEW generated code in a wxWidget application. One of the strengths of LabVIEW is not only signal acquisition and analysis but also simple GUI design, at least as long as you are after a functional GUI, and not a very specific style of a GUI. So I would never even consider to do the GUI part with anything but LabVIEW if some other parts are already to be done in LabVIEW.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Generate .PDF file from BlackBerry application

    Hai,
    Can anyone explain or give me some idea on generating pdf file in blackberry application programatically...
    Thanks in advance.
    Regards
    Ratheesh R Kurup

    hi Kiriakos,
    which version are you using ?
    please test this with reports 9i since PDF support
    has been enhanced there.
    to test i would suggest to run the report from rwclient
    as well and specify desformat=pdf and to a generate to
    file within builder to see if the same behavior occurs.
    if this problem reproduces there as well i suggest
    to contact oracle support to log the problem.
    regards,
    christian

  • Sim giving a strange language in sim applications

    When i open settings n go to phone for sim applications....one is english n the second language is written something like úuiui;' instead of urdu..any idea what is the problem n how it can be fixed??

    I bought a CS4 Upgrade in JUNE, and it has taken until yesterday for Adobe to tell me that a separate license/serial number is needed for each language. I have only been able to confirm this by consulting this forum (Windows).
    The problem has been that I ordered a UK English version but was mistakenly given a Spanish disc with an invoice saying it was English.
    When I reinstall the English language package, then change the User Interface language in Preferences, on relaunch I get a 30 day trial of CS 4 Extended in English!.  I am running this trial for the second time, which Adobe say you cannot do!
    I am unsure yet whether I need simply a different (English) number for this disc or another disc.
    Technical Support have referred this case to Customer Services.
    Customer Services have referred this case to Technical Support.
    To add insult to injury, they also overcharged me. The invoice simply says "199"  with NO CURRENCY. I have had to ask twice now for the balance to be returned.
    Is it any wonder that people use pirated software! The "Support" is non existent.

  • Good morning. I've read in some blogs and forums that the verizon wireless works in Europe but my question is if it works with portugueses cards (like vodafone sim)?

    Good morning (at least here in Portugal)
    My question is that I want to buy the new Iphone 5C, but I want to use it here in Portugal. I was in the store menu looking for it and it appears that I have to stay with a network for two years, if not the price will increase significantly. I want to buy it online because the Iphone will only arrive in Portugal in December and probably it will be more expensive. I've read in some blogs and forums that the verizon wireless works in Europe but my question is if it works with portugueses cards (like vodafone sim)?
    Thank you very much for the attention.
    Daniela João.

    The Verizon iPhone 5 is sold as unlocked. You can buy it full retail and use it anywhere you want. However, you won't get LTE in Europe and you won't be eligible for warranty service unless you take the phone back to the U.S. You won't be able to buy one on a contract unless you can pass a U.S. credit check. The minimum monthly cost would be $59.99 plus tax. I assume that all of this information will be true of of the 5C as well.
    Wait and buy the phone in Portuagal.

  • How come a force quit application would NOT quit?

    Hi,
    I have now had two instances when an application which I needed to force quit, would not quit.
    Both instances were with _*Elgato EyeTV version 2.5(3011)*_. OK the application would look as if it quits and disappear form the screen, but when checking in the DOCK the little triangle is there there. There was an error message "-600".
    I tried to repeat force quit to no avail. Douple clicking to restart the programme fully would not work either. Restarting would however resolve the problem.
    I suppose I should have tried to kill the application in TERMINAL.
    Any other explanations?
    Has anybody else come across resilient applications like that?
    Regards

    Thanks,
    I agree - force quit works better when first activating the Finder. If that gives you the rolling ball, trying the Activity Monitor is a good option.
    But the two events I am referring to are clearly different: ok, I used the Blue Apple Force Quit option, but the application would only sort of 'half quit'. There would be an error message: - 600. Also the Activity triangle in the dock would still be there. It would again be listed as an active application in the Blue Apple 'Force Quit' window. Force quitting in this window, would again remove it from that list, but the triangle would remain unchanged.
    Also starting the application again would not work. - OK, I did not try killing it in TERMINAL then,
    as I was about to switch off anyway. I used the Blue Apple option for that. No problems with it.
    Restarting later was without problems either.
    It just looks as if this particular application Elgato EyeTV +*would get stuck 'half way' after force quitting*+... Odd!
    Have you observed anything like that with any application?
    Regards

  • Saving an SMS to a SIM Card

    I went on the BB site to find out how to now save an SMS to a SIM card on my new BB Z10 and found this: http://docs.blackberry.com/en/smartphone_users/deliverables/47561/mwa1340200505520.jsp
    However, these instructions do not work as the option "Leave Messages On SIM Card" does not appear. Is it just my phone or is this the case for all Z10 users?
    There is no option to forward or save an SMS, and I really need to do this. Otherwise, is their a reliable app to export the SMS?
    I ask because I downloaded and installed a Contact App (Contact X) that seems to have completely messed up my phone and I'll have to wipe and start up again. But before doing so, I absolutely need to find a way to archive some SMS.
    Thanks in advance to anyone who can help.
    K.

    I, too, do not have that option on my Z10.  It could be that the article was written before an updated version of OS was released then was not updated to reflect the new OS.
    Cheers.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • I bought a second hand G4 iBook with iLife 09 on it.  I have copied iLife to my new Macbook Pro. The applications would not open, so I did a software update and update all three applications, but they will still not open.  Can anyone help?

    I bought a second hand G4 iBook with iLife 09 on it.  I have copied iLife to my new Macbook Pro. The applications would not open, so I did a software update and update all three applications, but they will still not open.  Can anyone help?

    The seller should have given you the original disk so that you can reinstall as needed. But it likely was a single-user license (which really means single computer) so you can only have a copy on one computer at a time. If the seller didn't give you the disk he is probably still using the software on his new Mac. Your best option to get any of the iWork apps to use in OS X 10.6.6 or later is through the Mac App Store. You can then install them on any Mac you have that has access to the Mac App Store using your Apple ID.

Maybe you are looking for