Generate Stats for a dblink table (SQL)

I am trying to generate some statistics on tables connected by a dblink.
I know with oracle you have table_columns which you can reference and pull some stats from.
Trying to get the column count and record counts for each table connected by a dblink.
I have tried these queries below to see if I could see any db properties: (some just to try something different)
select * from "table_owner".table_column@dblink ;
select * from "status"@dblink;
select /*DRIVING_SITE(a) */ count(*) from @dblink a;
What is the best method to finding this out without spending a lot of time? I have over 30 tables which are with large record sets and would love to learn a faster approach then pulling a sample table and doing a manual count and query for each table to count the rows.
Thanks!

937671 wrote:
I am trying to generate some statistics on tables connected by a dblink.
I know with oracle you have table_columns which you can reference and pull some stats from.
Trying to get the column count and record counts for each table connected by a dblink.post the SQL that you would use for local tables.

Similar Messages

SQL statement for my Audit Table

Hi,
I have enabled the Update Audit on table emp in my Oracle 9.2.0.6.0 production database. How to find the SQL used for updating the table.

Hi Padma,
The audit_trail is set to true
NAME               TYPE          VALUE
audit_file_dest          string          /u01/app/oracle/admin/audit
audit_sys_operations     boolean     TRUE
audit_trail          string          TRUE
transaction_auditing     boolean     TRUE

ABAP statement for JDBC connection to SQL server

Hi Gurus,
i need to connect a WebDynpro abap to a SQL server.
My OS is Unix so i cannot use a ODBC connection.
Can anyone help me to know if it's possible to write an abap statement to connect the SQL server by JDBC connection?
thanks a lot
Regards
Claudio.

Hi,
      ELSEIF SCREEN-GROUP2 = 'PRO'.
      clear: list.
      if screen-name = 'ZAVBAK-ZZPROMO_ID'.
        exec sql.
   commit
          set connection :'CBREPOSITORYPRD'
        endexec.
        exec sql.
          CONNECT TO :'CBREPOSITORYPRD'
        endexec.
        exec sql.
          COMMIT
        endexec
      EXEC SQL.
          OPEN C1 FOR
          SELECT CutterRewardsUserListid,
                 SAPAccountNumber,
                 PromoID,
                 FirstName,
                 LastName
                 FROM CutterRewardsUserList
                 WHERE SAPAccountNumber = :XVBPA-KUNNR ORDER BY PromoID
        ENDEXEC.
        DO.
          EXEC SQL.
            FETCH NEXT C1 INTO :WA5
          ENDEXEC.
          IF SY-SUBRC = 0.
            PERFORM UPDATE_LIST.
          ELSE.
            EXIT.
          ENDIF.
        ENDDO.
        EXEC SQL.
          CLOSE C1
        ENDEXEC.

Generating Indiex for dynamically added table rows in HRFORMS

Hi ,
We are developing Payslip in HRFORMS by copying standard form.
We have got one business scenario which requires a table rows needs to generated dynamically to populate the retro values in the form.
We could able to generate the table rows dynamically by below command in HRFORMs scripts.
Table1.Row.InstanceManager.addInstance(1) but it is not generating with correct index.
Please help in adding table rows dynamically at specified index.
Regards,
akula

You can do that with 2 differents ways :
by creating a colomn key which is the concatenation of the key for each lin
by using field groups
I think you have to use the second one.
[sample by help|http://help.sap.com/saphelp_nw70/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm]
In this case you can put dynamiquely what are you wanted in your keys.
Regards,
Christophe.

Skip gather stats for a partition | table from the gather_stats_job in 10g

Hi all,
Can we skip gather statistics for a table or a partition in a partitioned-table from the GATHER_STATS_JOB in Oracle 10g ?
(cause that partition store in an offline-datafile, so GATHER_STATS_JOB had errors when running in sheduled).
Thanks.
Edited by: user8710247 on Nov 26, 2011 6:41 PM

GATHER_TABLE_STATS will default to GRANULARITY 'AUTO' which will include Global and Partition Statistics. Global Statistics have to be across all the Partitions -- so Oracle will attempt to read all the partitions for this !
You need to run GATHER_TABLE_STATS with GRANULARITY 'PARTITION' and naming the other Partitions --- i.e. run it for each of the online partitions.
See :
SQL> create table XYZ (col_1 number, col_2 varchar2(5))
2 partition by range (col_1)
3 (partition P1 values less than (10) tablespace HEMANT,
4 partition P2 values less than (100) tablespace USERS)
5 /
Table created.
SQL> insert into XYZ values (5,'Five');
1 row created.
SQL> insert into XYZ values (50,'Fifty');
1 row created.
SQL> exec dbms_stats.gather_table_stats('','XYZ',estimate_percent=>100,granularity=>'ALL');
PL/SQL procedure successfully completed.
SQL> select partition_name, tablespace_name , num_rows, sample_size from user_tab_partitions
2 where table_name = 'XYZ'
3 /
PARTITION_NAME                 TABLESPACE_NAME                  NUM_ROWS
SAMPLE_SIZE
P1                             HEMANT                                  1
          1
P2                             USERS                                   1
          1
SQL>
SQL> exec dbms_stats.lock_table_stats('','XYZ');
PL/SQL procedure successfully completed.
SQL> alter tablespace HEMANT offline;
Tablespace altered.
SQL> exec dbms_stats.gather_table_stats('','XYZ',estimate_percent=>100,granularity=>'ALL');
BEGIN dbms_stats.gather_table_stats('','XYZ',estimate_percent=>100,granularity=>'ALL'); END;
ERROR at line 1:
ORA-20005: object statistics are locked (stattype = ALL)
ORA-06512: at "SYS.DBMS_STATS", line 13159
ORA-06512: at "SYS.DBMS_STATS", line 13179
ORA-06512: at line 1
SQL>
SQL> exec dbms_stats.unlock_table_stats('','XYZ');
PL/SQL procedure successfully completed.
SQL> exec dbms_stats.lock_partition_stats('','XYZ','P1');
PL/SQL procedure successfully completed.
SQL> exec dbms_stats.gather_table_stats('','XYZ',estimate_percent=>100,granularity=>'ALL');
BEGIN dbms_stats.gather_table_stats('','XYZ',estimate_percent=>100,granularity=>'ALL'); END;
ERROR at line 1:
ORA-00376: file 2 cannot be read at this time
ORA-01110: data file 2:
'/usr/oracle/oradata/MONDB/datafile/o1_mf_hemant_7d6m8zkx_.dbf'
ORA-06512: at "SYS.DBMS_STATS", line 13159
ORA-06512: at "SYS.DBMS_STATS", line 13179
ORA-06512: at line 1
SQL>
SQL> exec dbms_stats.gather_table_stats('','XYZ',estimate_percent=>100,partname=>'P2');
BEGIN dbms_stats.gather_table_stats('','XYZ',estimate_percent=>100,partname=>'P2'); END;
ERROR at line 1:
ORA-00376: file 2 cannot be read at this time
ORA-01110: data file 2:
'/usr/oracle/oradata/MONDB/datafile/o1_mf_hemant_7d6m8zkx_.dbf'
ORA-06512: at "SYS.DBMS_STATS", line 13159
ORA-06512: at "SYS.DBMS_STATS", line 13179
ORA-06512: at line 1
SQL> exec dbms_stats.gather_table_stats('','XYZ',estimate_percent=>100,partname=>'P2',granularity=>'GLOBAL AND PARTITION');
BEGIN dbms_stats.gather_table_stats('','XYZ',estimate_percent=>100,partname=>'P2',granularity=>'GLOBAL AND PARTITION'); END;
ERROR at line 1:
ORA-00376: file 2 cannot be read at this time
ORA-01110: data file 2:
'/usr/oracle/oradata/MONDB/datafile/o1_mf_hemant_7d6m8zkx_.dbf'
ORA-06512: at "SYS.DBMS_STATS", line 13159
ORA-06512: at "SYS.DBMS_STATS", line 13179
ORA-06512: at line 1
SQL>
SQL> exec dbms_stats.gather_table_stats('','XYZ',estimate_percent=>100,partname=>'P2',granularity=>'PARTITION');
PL/SQL procedure successfully completed.
SQL>Hemant K Chitale

Insert Statement for Form on Table with Report

I'm using a 'getID' process On Load Before Header to make sure I get an ID for my form per suggestion from blarman here. The form has many fields from one table and four collections. If I let the process run as I think it should (when the ID is null) the link to the report does not fetch any field except the id. If I set the process to never run everything loads but my update process doesn't run. What am I doing wrong? Advance thanks...
Alexandra
Get ID Process
declare
new_id NUMBER; --gets the next sequence number for new record ID
begin
INSERT INTO DOC_INFO (DOC_INFO_ID,OWNER_ID,STATUS_ID, DOCNO, DOC_TITLE, REVISION, STATUS_DT,ISSUE_DT, REVIEW_DT, ECRNO, ECR_LINK, DOC_LINK, COMMENTS, KEYWORDS, DOC_TYPE, ASSOC_ITEMNO, FILE_TYPE, FILE_NAME, CHANGE_TYPE, NEW_DOCNO) values(new_id, 0, 0, '', '', '', '','', '', '', '', '', '', '', '', '', '', '', '','');
:P26_DOC_INFO_ID := new_id;
end;Update Process (On Submit/After Comp...)
Update DOC_INFO
SET
DOC_INFO_ID = :P26_DOC_INFO_ID,
OWNER_ID = :P26_OWNER_ID,
STATUS_ID = :P26_STATUS_ID,
DOCNO = :P26_DOCNO,
DOC_TITLE = :P26_DOC_TITLE,
REVISION = :P26_REVISION,
STATUS_DT = :P26_STATUS_DT,
ISSUE_DT = :P26_ISSUE_DT,
REVIEW_DT = :P26_REVIEW_DT,
ECRNO = :P26_ECRNO,
ECR_LINK = :P26_ECR_LINK,
DOC_LINK = :P26_DOC_LINK,
COMMENTS = :P26_COMMENTS,
KEYWORDS = :P26_KEYWORDS,
DOC_TYPE = :P26_DOC_TYPE,
ASSOC_ITEMNO = :P26_ASSOC_ITEMNO,
FILE_TYPE = :P26_FILE_TYPE,
FILE_NAME = :P26_FILE_NAME,
CHANGE_TYPE = :P26_CHANGE_TYPE,
NEW_DOCNO = :P26_NEW_DOCNO
WHERE DOC_INFO_ID = :P26_DOC_INFO_ID;

Got it...I think it had to do with the use of my 'Create' and 'Apply Changes' buttons.
Thanks for your time anyway.

Powershell - SQL statement for WMI query

Need to input / update sql database, two main tables: server and diskDrive
The Primary key for server table is server_id which is also a foreign key in diskDrive table.
There is no primary key set in the diskDrive table.
I am able to insert all of the basic data in the server table no problem.
What I need help creating/understanding is how to account for the servers with multiple drives.
Here is my command for accounting for all drive information:
$diskDrive = gwmi -query "select * from Win32_Volume where DriveType='3' AND DriveLetter IS NOT NULL" | Select @{Name="Device";Expression={$_.DriveLetter}},`
@{Name="Capacity";Expression={[math]::round(($($_.Capacity)/1GB),2)}},`
@{Name="FreeSpace";Expression={[math]::round(($($_.FreeSpace)/1GB),2)}},`
@{Name="UsedSpace";Expression={[math]::round((($_.Capacity - $_.FreeSpace)/1GB),2)}},`
@{Name="PercentFree";Expression={[math]::round(($($_.FreeSpace)/$($_.Capacity)*100),2)}}
My thought is to create an exist statement to determine if I need to insert or update the Database:
$ServerExist = "Select server_id from server where server_name = '$ServerInfo.csname'"
if ($ServerExist) {
update statement
} else {
#Create SQL Insert Statement with your values
$insert_stmt = "INSERT INTO Server(server_name, domain_name, Manufacturer, Model, Memory)
VALUES ('$($Output.Name)','$($Output.Domain)','$($Output.Manufacturer)','$($Output.Model)','$($Output.TotalPhysicalMemory)')" -replace "\s+"," "
$cmd.CommandText = $insert_stmt
## Invoke the Insert statement
$cmd.ExecuteNonQuery()
I have tested the insert statement and that works fine. However I have not implemented the $diskDrive aspect of the insert.
Although there will be a slight difference between the insert and update statement for the diskDrive table, still need to work out the iteration aspect for sql statement.
Items that will need to be inserted/updated per drive:
Server_id
DriverLetter
Capacity
FreeSpace
UsedSpace
PercentFree
Given my $diskDrive query, I think there needs to be While($diskDrive) statement that will iterate through the drive info and then insert/update until While is finished.
However I’m not sure how that is accomplished and hoping to get some help.
Please let me know if any other information is needed.
Thanks,
Jr. Admin

Hello jrv,
The problem is my limited experience in powershell and how to iterate through the $diskDrive variable and pull the specific drive information including the server_id and inserting or updating the diskDrive table accordingly.
I was able to figure out how to do the insert for one specific wmi entry but in regards to the disk drive, i'm not sure how to work the scripting to run through each drive, insert/update and continue until all drives have been accounted for.
Please let me know if you need any other information. I will consider posting later on SQL forum.
Thanks,
Jr. Admin

Unable to generate spool for two tables in report output

Hi,
I created report with two custom containers displaying two tables in output. When I execute the report in background spool is created only for one table in top custom container.
What should be done to generate spool for both the tables in two different custom containers.
Thanks,
Abhiram.

Hi,
Check the bellow link for your requirement.
<<link removed>>
Regards,
Goutam Kolluru.
Edited by: kishan P on Feb 2, 2012 1:50 PM

Update stats for table in dbstatc

Hello all,
    I am very new to administrating SAP on Oracle. My question is. There are some tables in dbstatc with ignore flag. I ran the below query to get that...
select COUNT(*) from sapsr3.dbstatc
where ACTIV = 'I';
Now from my understanding the I flag means...do not update stats for that table...
So i first ran below...which runs the full stats and it did not update or touched those table in dbstats with I flag
brconnect -c -u / -f stats -t all -f collect -p 8
so after researching i found we can update those stats with below .... even after running the below, stats still do not show up as update.... how can i update (forcefully if required) to update stats for a particular table....
brconnect -u / -c -f stats -t SAPSR3.table_name -f allsel -p 4
i query dba_tables at DB level to see if that specific table was analyzed or not. I am on 11.2 oracle version...and this is a BW SAP system....

New User:
1) Which objects do you have the INACTIVE flag set for:
col dbobj format a20
select dbobj, activ from sapsr3.dbstatc where activ = 'I' order by 1;
2) Check that you have the correct DBSTATC settings per SAP Note 403704.
If you do not, then I would suggest you update the DBSTATC table following SAP Note 403704, but before you do take a copy of the dbstatc table:
sqlplus sapsr3/<pass.
create table dbstatc_old as select * from dbstatc;
3) To check to see if you have stats on a table:
select table_name, partitioned, last_analyzed, num_rows from dba_tables where table_name = 'TBTCO';
TABLE_NAME                     PAR LAST_ANALYZED     NUM_ROWS
TBTCO                          NO 19-MAY-11           163030
If the LAST_ANALYZED shows up with NO values, then there are NO stats on the table.
HOWEVER, be careful for partitioned tables in BW because there are stats at the partition level as well:
select TABLE_NAME, PARTITION_NAME, LAST_ANALYZED, NUM_ROWS from dba_tab_partitions where table_name = '<table>';
4) To collect the statistics on a table
brconnect -c -u / -f stats -t <TABLE> -f allsel,collect -g 4 -p 16
5) If the stats are still not collected with the brconnect command, it may be because the stats are locked at the table level from SAP Note 1020260:
SELECT stattype_locked FROM dba_tab_statistics WHERE table_name = '<TABLE>';
If the value is ALL, then the stats may be locked at the table level and may require to unlock the stats before updating.
Good Luck,
Mike Kennedy

How to gather stats on the target table

Hi
I am using OWB 10gR2.
I have created a mapping with a single target table.
I have checked the mapping configuration 'Analyze Table Statements'.
I have set target table property 'Statistics Collection' to 'MONITORING'.
My requirement is to gather stats on the target table, after the target table is loaded/updated.
According to Oracle's OWB 10gR2 User Document (B28223-03, Page#. 24-5)
Analyze Table Statements
If you select this option, Warehouse Builder generates code for analyzing the target
table after the target is loaded, if the resulting target table is double or half its original
size.
My issue is that when my target table size is not doubled or half its original size then traget table DOES NOT get analyzed.
I am looking for a way or settings in OWB 10gR2, to gather stats on my target table no matter its size after the target table is loaded/updated.
Thanks for your help in advance...
~Salil

Hi
Unfortunately we have to disable automatic stat gather on the 10g database.
My requirement needs to extract data from one database and then load into my TEMP tables and then process it and finally load into my datawarehouse tables.
So I need to make sure to analyze my TEMP tables after they are truncated and loaded and subsequently updated, before I can process the data and load it into my datawarehouse tables.
Also I need to truncate All TEMP tables after the load is completed to save space on my target database.
If we keep the automatic stats ON my target 10g database then it might gather stats for those TEMP tables which are empty at the time of gather stat.
Any ideas to overcome this issue is appreciated.
Thanks
Salil

Designer generating CG_REF_CODES inserts without the table name.

We have upgraded our repository from 9i to 10g and now when we generate DDL we get our insert statements for the CG_REF_CODES table without a table name. I am sure that this must be a setting somewhere but I can't find any reference to it in the help. The following is an example of the generated .avt file from our 10g installation.
Thanks in advance,
Chris S.
DELETE FROM
WHERE RV_DOMAIN = 'DURATION_VALUE'
INSERT INTO (RV_DOMAIN, RV_LOW_VALUE, RV_HIGH_VALUE, RV_ABBREVIATION, RV_MEANING)
VALUES ('DURATION_VALUE', 'D', NULL, 'Days', 'Days')
INSERT INTO (RV_DOMAIN, RV_LOW_VALUE, RV_HIGH_VALUE, RV_ABBREVIATION, RV_MEANING)
VALUES ('DURATION_VALUE', 'M', NULL, 'Months', 'Months')
INSERT INTO (RV_DOMAIN, RV_LOW_VALUE, RV_HIGH_VALUE, RV_ABBREVIATION, RV_MEANING)
VALUES ('DURATION_VALUE', 'Y', NULL, 'Years', 'Years')
INSERT INTO (RV_DOMAIN, RV_LOW_VALUE, RV_HIGH_VALUE, RV_ABBREVIATION, RV_MEANING)
VALUES ('DURATION_VALUE', 'B', NULL, 'Business Days', 'Business Days')
INSERT INTO (RV_DOMAIN, RV_LOW_VALUE, RV_HIGH_VALUE, RV_ABBREVIATION, RV_MEANING)
VALUES ('DURATION_VALUE', 'I', NULL, 'Indefinite', 'Indefinite')
COMMIT
/

Sounds like a bug to me, but one thing you can check is the generator options that affect the reference code table. In the Design Editor select your application in the navigator, then the Options menu. Select "Generator Options...", then "General..."
One thing you might fool with is the File Name Length restriction - mine is blank, but then I tend not to use CG_REF_CODES, so I haven't generated them for quite a while. Try setting it to 30, which would be the right number for Oracle, or to 0, which is supposed to mean "no restriction".

Select statement for summing values in column?

How to write a select statement for sap standard table which contains data as given below
col1        col2
A     10
A     20
A     30
B     50
B     60
C     70
Need the output of select in internal table as given below
A     60
B     110
C     70
Regards,
Rachel

Thanks for all the valuable input.
Below I have used sum in select statement(check case 2"),but i am not getting required o/p.
Kindly guide me.
case1 :
select aebeln aebelp bpackno bmenge
into corresponding fields of table itab
from ( eslh as a inner join esll as b
on bpackno = apackno )
where a~ebeln = 6000000100
and a~ebelp = 00010
and a~packno = '0000001025'
order by aebeln aebelp b~packno .
O/p for the above .
ebeln                       ebelp         packno                             menge
6000000100     00010     0000001025              6.000
6000000100     00010     0000001025               5.000
6000000100     00010     0000001025              2.000
6000000100     00010     0000001025              1.000
6000000100     00010     0000001025              2.000
case2:
select aebeln aebelp bpackno sum( bmenge )
into corresponding fields of table itab
from ( eslh as a inner join esll as b
on bpackno = apackno )
where a~ebeln = 6000000100
and a~ebelp = 00010
and a~packno = '0000001025'
group by aebeln aebelp b~packno
order by aebeln aebelp b~packno .
6000000100     00010     0000001025     0.000
Edited by: Rachel on Nov 25, 2008 11:45 AM
Edited by: Rachel on Nov 25, 2008 11:46 AM

VLD-1119: Unable to generate Multi-table Insert statement for some or all t

Hi All -
I have a map in OWB 10.2.0.4 which is ending with following error: -
VLD-1119: Unable to generate Multi-table Insert statement for some or all targets.*
Multi-table insert statement cannot be generated for some or all of the targets due to upstream graphs of those targets are not identical on "active operators" such as "join".*
The map is created with following logic in mind. Let me know if you need more info. Any directions are highly appreciated and many thanks for your inputs in advance: -
I have two source tables say T1 and T2. There are full outer joined in a joiner and output of this joined is passed to an expression to evaluate values of columns based on
business logic i.e. If T1 is available than take T1.C1 else take T2.C1 so on.
A flag is also evaluated in the expression because these intermediate results needs to be joined to third source table say T3 with different condition.
Based on value taken a flag is being set in the expression which is used in a splitter to get results in three intermediate tables based on flag value evaluated earlier.
These three intermediate tables are all truncate insert and these are unioned to fill a final target table.
Visually it is something like this: -
T1 -- T3 -- JOINER1
| -->Join1 (FULL OUTER) --> Expression -->SPLITTER -- JOINER2 UNION --> Target Table
| JOINER3
T2 --
Please suggest.

I verified that their is a limitation with the splitter operator which will not let you generate a multi split having more than 999 columns in all.
I had to use two separate splitters to achieve what I was trying to do.
So the situation is now: -
Siource -> Split -> Split 1 -> Insert into table -> Union1---------Final tableA
Siource -> Split -> Split 2 -> Insert into table -> Union1

SQL*Loader-929: Error parsing insert statement for table

Hi,
I get the following error with SQL*Loader:
Table MYTABLE loaded from every logical record.
Insert option in effect for this table: INSERT
Column Name Position Len Term Encl Datatype
IDE FIRST * ; CHARACTER
SQL string for column : "mysequence.NEXTVAL"
CSI_NBR 1:10 10 ; CHARACTER
POLICY_NBR 11:22 12 ; CHARACTER
CURRENCY_COD 23:25 3 ; CHARACTER
POLICY_STAT 26:27 2 ; CHARACTER
PRODUCT_COD 28:35 8 ; CHARACTER
END_DAT 44:53 10 ; CHARACTER
FISCAL_COD 83:83 1 ; CHARACTER
TOT_VAL 92:112 21 ; CHARACTER
SQL*Loader-929: Error parsing insert statement for table MYTABLE.
ORA-01031: insufficient privileges
I am positive that I can SELECT the sequence and INSERT into the table with the user invoking sql*loader.
Where does that "ORA-01031" come from?
Regards
...

Options:
1) you are wrong about privileges OR
2) you have the privilege only when you connect via SQL*Plus (or whichever other tool you used to test the insert).
Is it possible that during your test you enabled the role which granted you the INSERT privilege - and that SQL*Loader doesn't do this?
Can you see the table in this list?
select *
from user_tab_privs_recd
where table_name='MY_TABLE'
and owner='table owner whoever';
select *
from user_role_privs;Any roles where DEFAULT_ROLE is not YES?
HTH
Regards Nigel

TopLink does not generate SQL statements for inserting new objects

TopLink does not generate SQL statements for inserting new objects. Why?
Thanks in advance...

Please see the response in
Why does not unitofwork.commit write data to the database?
Regards,
Chris

Generate Stats for a dblink table (SQL)

Similar Messages

Maybe you are looking for