Generate Transaction Data

Hello xperts,
I'm building a custom demo environment.
I need to have a reasonable amount of transaction data, which I will load from flat files.
Does anybody know how to generate transaction data in a fairly quick way. For example through an Excel macro, Access database, tool, etc.
Any suggestions are highly appreciated!
Thx
JvB
Message was edited by: JvB

JvB,
In my last couple of assignments we created test data in DEV/TEST environment & extracted them using standard business content datasource in BW to check the validity of Datasources.
As far as creating it on flat files is concerned its going to be time consuming process, may be using excel might help.
Just save them as CSV files (to load in BW)so that u can use excel which is more convient to use than notepad.
Hope this helps.
Monica

Similar Messages

  • While loading transaction data into cube what are the tables generats

    Hi,
    while loading transaction data into cube what are the tables normally generats.

    Hi,
    Normally datas will be loading to 'F'- Fact tables (/BIC/F****) *** - cube name..
    When you do compress the request the data will be moved into E tables.
    Regards,
    Siva.

  • AR Transaction Data vs Line Item

    Hello,
    I have need to generate a report with some degree of detail and I am having an issue understanding the correlation between AR Transaction Data and Line Item.  In a report I would like to show sales for the period and AR balances and I need to be able to drill down on these (at Profit center level or Business Area Level both Characteristics have been added to the extractor and are being populated).
    How is Sales for Period derived in Transaction Data?  Can I create this same Key Figure at the Line Item Level?
    Any assistance is greatly appreciated.
    MK

    Sales are derived from the posting key used to post a AR document
    The posting key is either sales/turnover relevant or not
    As peopel use posting keys for all sorts of thingss- this is not the ideal solution to report Sales
    it also includes VAT
    ow ar eyou planning to add Profit Centre -?
    Conside the following document
    Dr Debtors £117.50
    Cr Reveneu Prfit centre 1  £50
    Cr reveneue Profit Centre 2  £50
    Cr VAT £17.50
    how are you going to get the profit centre onto the debtors postings?
    You can't... you can see the data in 0EC_PCA_4 or you can join Ar4 ODS to the GL ODS via an infoset

  • CIF of transaction data from ECC to APO

    Hi,
    I wanted to know where we maintain the configuration for real time transfer of transaction from ECC to APO.
    I know for master data we have an option in CFC9 for real time/periodic transfer. Is there any similar config for transaction data too like sales orders etc.

    Hi Alok,
    To allow online transfer of changes to transaction data from SAP R/3 to SAP APO, you have to activate generally the BTEs in SAP R/3.
    This is done in R/3. This is the path:
    SPRO --> Integration with Other SAP Components --> Basic Settings for the Data Transfer --> Change Transfer --> Change Transfer for Transaction Data --> Activate Online Transfer Using BTE
    You can read about it here:
    Change Transfer for Transaction Data - Integration via APO Core Interface (CIF) - SAP Library
    Then of course you will need to generate and actiave your IModels.
    Kind Regards,
    Mariano

  • Need more Info about "Load transactional data when master data not loaded"

    Hi,
    Can you please explain me this option in the infopackage " Load transactional data when master data is not loaded"....
    Say i load a transactional data record which has a material no. AAAXX.
    In the fact table, the material no. is replaced with the corresp. DIM ID.
    Now, assume that there is no entry for this Material no.
    AAAXX in the master data table...so no DIM ID for it..
    How is it then stored in the fact table ?
    Hope i have managed to explain the scenario..
    Thanks in advance,
    Punkuj

    Hello Punkuj K,
    How r u ?
    No, if the entry for that Material Number "AAAXX" is not there in the Master Data then it will create a SIDs & DIMs ID for that & Transaction Data will be loaded.
    Use
    Choose this indicator if you want to always update the data, even if no master data for the navigation attributes of the loaded records exists. The master data is generated from the loaded transaction data. The system draws SIDs. You can subsequently load the master data.
    Dependencies
    The texts, attributes, and hierarchies are not recognized by the system. Load the texts / attributes / hierarchies for the corresponding InfoObjects separately.
    This function corresponds to the update. Possible errors when reading the master data into the update rules are not associated with this indicator.
    Recommendation
    We recommended loading the master data into the productive systems in advance. Select this indicator especially in test systems.
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • AR aging report--from transaction date

    Hi
    Presently the 7/4 bucket aging report shows current and invoices no of days past due i.e. 31 days due past due date.
    Is there a report or any way by which this aging report can be generated to show aging from transaction date.
    Thanks
    Ninad

    Hi ninad
    Aging Reports by default are generated based on Transaction date only and not based on GL Date. Please explain your requirement clearly
    Regards
    Sivakumar

  • Need urgent help to generate SPL Data Sources for Line Items

    Hi All,
    I am trying to extract the Special Purpose Ledger Data from R/3 into BW. To do this, I am following the steps to generate the Data Sources for Totals table and Lien Items Table.
    Using Transaction BW01 and BW03 on the R/3 side, I am able to generate the Totals Record-DataSource   successfully.
    But I am not able to generate the Line Items-DataSource. I am using the same procedure.
    Can someone please help me or point me in the right direction. Are there any other settings I need to make to generate the Line Items-DataSource. Interestingly, I am able to generate the Line Items-DataSource  for some other old ledgers in the System like ZZ and ZX. But I need the Line Items-DataSource  from a ledger called ZP for which I am having trouble.
    I would greatly appreciate if someone can get back to me ASAP.

    During BW01, The Generate extract structure is fine for both Total and Line Item Table.The issue is when we run tcode bw03 where you assign the datasource to a ledger.
    Here, I can assign only for the Total Records data source and NOT for the Line Items-DataSource.
    I hope I could explain the issue. Looking forward for some advice.

  • Can i upload  first  Transaction data rather than master data what will hap

    hai,
    can i upload  first  Transaction data rather than master data what happends going in bw regarding performance issues like indexes
    let me know
    regards,
    murali

    Hi Murali,
    you can load the transaction data before master data. The main impact will be, that the system has to generate sid's and has to populate the sid-table of the master data objects while loading the data to a data target (cube or ods that is activated for bex reporting). This basically means that your data loads will take some more time. Additionally, if you need the master data attributes somewhere in your update or transfer rules, you will not get the correct information.
    So basically it is always a good approach to load and activate the master data before loading the transactional data. But anyway, specially in the development environment I usually don't load all the necessary master data.
    regards
    Siggi
    PS: navigational attributes of the data targets will not be available until you loaded the master data and scheduled the attribute and hierarchy change run.
    Message was edited by: Siegfried Szameitat

  • Table name for the transaction data

    Hello Gurus,
        what is the table name for the transaction data which we have created through t.code PRO5. we are generating report for the total kms per vehicle type for a employee. these data in which tables can i get? the data related to trips ? 
    thanks in advance
    regds
    ramachandra

    Hi,
    Pl use RPR_TRIP_HEADER_DATA programme for getting general trip data, which will have details about number of KM travelled by employee for each trip, amount to reimbursed to the employee etc.
    Thanks,
    Nandagopal C

  • Vendor with last transaction date

    Hi,
    Can I generate any report which contains all vendors with last transaction date? THis is for audit purpose.
    Thanks & Regards,
    Rajaneesh.C

    Hi,
    You can take the report of the  FI accounting document for all vendors based on the company code and the posting date ( input the present date) in the T code- S_ALR_87012991.
    regards,
    Kannan B

  • Master Data/transactional Data Loading Sequence

    I am having trouble understanding the need to load master data prior to transactional data.  If you load transactional data and there is no supporting master data, when you subsequently load the master data, are the SIDs established at that time, or will then not sync up?
    I feel in order to do a complete reload of new master data, I need to delete the data from the cubes, reload master data, then reload transactional data.  However, I can't explain why I think this.
    Thanks,  Keith

    Different approach is required for different scenario of data target.  Below are just two scenarios out of many possibilities.
    Scenario A:
    Data target is a DataStore Object, with the indicator 'SIDs Generation upon Activation' is set in the DSO maintenance
    Using DTP for data loading.
    The following applies depending on the indicator 'No Update without Master Data' in DTP:
    - If the indicator is set, the system terminates activation if master data is missing and produces an error message.
    - If the indicator is not set, the system generates any missing SID values during activation.
    Scenario B:
    Data target has characteristic that is determined using transformation rules/update rules by reading master data attributes.
    If the attribute is not available during the data load to data target, the system writes initial value to the characteristic.
    When you reload the master data with attributes later, you need to delete the previous transaction data load and reload it, so that the transformation can re-determine the attributes values that writes to the characteristics in data target.
    Hope this help you understand.

  • How to transfer the transactional dat a using ale

    hi to all abap gurus
    i heard that we can transfer the transactional data ( like so data , po data ) using message control technique by ale technology . . can u please give  all steps  in message control technique with one exapmle . i searched in the forum but i did not get answer . pls points will be rewrared for good answers.  if u want to give links pls give exact links .

    Hi ,
           here is the configuration.
    MESSAGE CONTROL (USING EDI / ALE)
    For Purchase order (Message control using EDI and message type ORDERS) – STEPS
    Settings to be done in the Sending system
    From NACE
    Choose Application – EF ( Purchase order), press on condition record
    Output type – NEU – Purchase order / double click ;choose  Purchasing output determination:Doc type/purc org/vendor . Key in the data (Purchasing doc type – NB, Purc organisation – 0001, Venor – vendor11) execute. Key in the data (vendor –vendor11, name – name1, partner function  - VN, Partner – Vendor11,Medium – 6 (EDI), time – 4(send immediately), language – EN).
    Press on output types , choose NEU –Purchase order, double click,  Access sequence 0001(doctype/purcorg/vendor) tick mark the access to condition, go to default values (dispatch time – send immediately, Transmission medium – EDI, Partner function –VN)
    Create RFC destination from SM59 (ZNARA_ALE_EDI).
    Create a port from ZNARA_ALE.
    Create partner profile vendor11 under LI and not LS. PARTNER NUMBER SHOULD BE  SAME AS THAT OF VENDOR SET IN THE CONDITION TYPE.
    In the outbond parameters of the partner profile Vendor11 key in the data (Reciever port -> ZNARA_ALE,
    Basic type –ORDERS05, Message type – ORDERS ) Go to the message control and key in the data (Application – EF, Message type – NEU, Process code –ME10, Transfer immediately )
    Create a purchase order from ME21 with data (Purchasing doc type – NB, Purc organisation – 0001, Venor – vendor11). System will generate an outbond Idoc automatically which can be seen from WE02.
    For Purchase order (Message control using ALE and Message type ORDERS) - STEPS
    To transfer the idoc from Client 555 to 500
    Settings do be done in 555.
    From NACE
    Choose Application – EF – Purchase order, press on condition record
    Output type – NEU – Purchase order / double click ;choose  Purchasing output determination:Doc type/purc org/vendor . Key in the data (Purchasing doc type – NB, Purc organisation – 0001, Venor – vendor11) execute. Key in the data (vendor –vendor11, name – name1, partner function  - VN, Partner – Vendor11,Medium – A (ALE), time – 4(send immediately), language – EN).
    Press on output types , choose NEU –Purchase order, double click,  Access sequence 0001(doctype/purcorg/vendor) tick mark the access to condition, go to default values (dispatch time – send immediately, Transmission medium – ALE, Partner function –VN)
    From SALE create two logical systems and assign them to the respective clients (ZALERECV_N – 500, ZALESEND_N – 555).
    From SM59 create RFC destination with the same name as that of the receiving logical system  (ZALERECV_N).
    From BD 64(distribution model),  create a model view with Technical name ZNARA_PO (message type – ORDERS, Sender – ZALESEND_N, Receiver – ZALERECV_N). Generate partner profiles. Distribute.
    Note that partner profile will be generated under LS.
    Settings do be done in 500.
    From NACE create two logical systems and assign them to the respective clients (ZALERECV_N – 500, ZALESEND_N – 555).
    From BD 64(distribution model), keep the cursor on Technical name ZNARA_PO. Generate partner profiles. Note that partner profile will be generated under LS. Change the process code to ORDE in the inbond parameters .
    Now in client 555, Create a purchase order from ME21 with data (Purchasing doc type – NB, Purc organisation – 0001, Venor – vendor11). System will generate an outbond Idoc automatically which can be seen from WE02. The purchase order details will be updated in 555 thru the inbond idoc.
    IMP data for message control in  Sales order creation.
    Partner profile to be created under KU.
    Outbond parameters in the partner profile (Message type – ORDRSP, Basic type – ORDERS02, partner profile - SP) In Message control (Application – V1, Message type – BA00, Process code – SD10)
    Notes:
    Check the entries in the NAST table to see whether outbond idoc has been created successfully or not
    If you have choosen collect idocs in the partner profile, use trans code BD87 to process them
    Table EDP13 - Partner Profile: Outbound (technical parameters)
    Table EDP21 - Partner Profile: Inbond (technical parameters)
    Please reward if useful.

  • Pass transaction data from an InfoProvider to the BPC within BW

    Hi Gurus,
    I need to pass transaction data from an InfoProvider to the BPC Real-Time InfoCube, but I need to do from BW, and not from the BPC Excel interface.
    The reason is that I want to make the whole process in one step, and at the beginning of the process the end-user has to introduce some parameters in the BW, as we are launching the process chain from a transaction.
    Therefor I copied the process chain /CPMB/LOAD_INFOPROVIDER and tried to introduce the different parameters that are normally delivered by the prompt in the excel interface.
    Can anybody help? Does anybody know what parameters for each process type have to be introduced, in what form and if all the process types are needed?
    Making it with a normal BW transformation is also not an option, as we don't want to change from plan mode and stop people from planning.
    It is very important for my end user to do everything in one step, without having to enter the BPC Excel interface.
    Thanks in advance.
    Cheers,
    Àlex

    Hi Frank,
    I have checked and we have many processes in SM50 available for the job to use. Sometimes there are no other jobs running in the BW System except for the 2 jobs but still the 2nd job waits for the first to finish.
    I did another check on transaction code SM58 in BW System. Here it shows all the transactional RFC queues that is being generated by the 2 jobs. I saw that only TRFC queues are able to execute at one time. I am not sure if this is the problem but is it possible to set the number of queues that can be executed at one time to more than 2? If yes, where can I find such a setting?
    This is quite urgent as this problem causes all my jobs to end very late.
    Thanks.
    Shunhui.

  • Error 7 occurred when generating the data transfer program

    Hello All ,
    In Master Data Load Process Chain ,  we get error like
    1. System Response
        Caller 09 contains an error message.
    Diagnosis
    Error 7 occurred when generating the data transfer program for the requested InfoSource.
    System Response
    The data transfer is terminated.
    Procedure
    Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
    Note : We faced this issue for two days now . Just repeating the load make it success .
    If any one faced and fixed this issue . Please let me know .
    Thanks in advance .

    Hi,
    . Initially goto transaction SE38, Run the program RSDS_DATASOURCE_ACTIVATE_ALL. Give your Datasource name, and source system and check the check box for "Only Inactive objects".
    This will actiavate the given datasource.
    2. Replicate the datasource in RSA1.
    3. Try to schedule the infopackage for the datasource which you have activated now.
    4. IF infopackage runs through, Repeat the process for all datasources ie uncheck the check box, which means it will activate all datasources for the source system.
    Also make sure that there will be enough Back Ground Processor available....
    Reduce the parallel process
    Thanks
    BVR

  • Generate Master data IDOC using report-RPCEMDU0_CALL (Tcode-PC00_m10_OTEM)

    Hi All,
    Can anyone please explain me the functionality of report RPCEMDU0_CALL  (Tcode-PC00_m10_OTEM). This is used to generate master data idocs. Any documentation would be really helpful.
    Also is there any way to alter the idoc data before sending. Please let me know.
    Thanks in advance.
    Regards,
    Priti Thakur

    Standard Doc[ for this transaction.|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/f6/2318b13cf011d2a62900104b56737d/frameset.htm]
    There are few threads in SDN and ittoolbox to discuss about the problems but nothing much!
    To alter the format...explore the program. You can use the "Enhancement" part to add your custom logic to add columns to interface internal table. To access the enhancement...go to the program and press the 6th button from left ..the swirl button or press Shift + F4. Then activate enhancements ...to do the necessary coding as required.
    Also try the user exit:
    Note 1515497 - OT: Selection of a Provider - Customization User Exits
    As per this note, there is a contact info of SAP Developer...if the note and the info is helpful and you need help related to that note or that functionality contact them.
    Edited by: Amosha on Jun 22, 2011 10:31 AM

Maybe you are looking for

  • BETWEEN DATE Query help

    Dear Experts, I am new to PL/SQL and need your expert advice and help on below query, SELECT * FROM SCHEMA.TABLE WHERE DATETIME BETWEEN (TO_DATE('SYSDATE-1 07:00:01','MM/DD/YYYY, HH24:MI:SS')) AND (TO_DATE('SYSDATE-1 14:59:59','MM/DD/YYYY, HH24:MI:SS

  • Error message in returning a book using Digital Editions

    Recently I have been unable to return books through Digital Editions to the eLibrary when I've borrowed them.  I get the following error message:  E_BAD_LOAD_ID.  When I go into the eLibrary, it no longer shows the book as checked out to me, but in D

  • How do I save a running sequence file

    Part of my testing requires a large number of variables to be passed to and from the UUT within TestStand. I can store some of these variables in the station globals, but I'd like the option to store others in the sequence files at run time and save

  • I have an iMac, two iPhones and an iPad. I am moving to Australia. Can I use iCloud to be able to access everything I own?

    I have tons of photos, music, files, etc. I want to be able to access them in AU. But I can't bring the devices with me. Is iCloud a good solution for this?

  • Tiger DVD Player Crashing!

    So all of a sudden when I put a DVD movie in my eMac, DVD Player opens for like 2 seconds & then I get the typical Crash. I click retry and it crashes again. I know the DVD Drive itself is good because I can watch a DVD with VLC. I went to look for A