Generated Program from transformation

Hi,
I have created a transformation and transported it into production. I had to changed one of the routine on a key figure. The last changed key figure is now executed last in the generated program.
Example:
Start routine: declared global variables X and Y.
Transformation: 3 key figures
A
B
C
Routine is used to calculate A. This value is passed to the global variable X. X is then used in B and passed to global variable Y. Y is then used to calculate C.
When i first created the transformation, the sequence was working well. But after the change in routine on A. The sequence is changed and the generated program has a sequence:
B
C
A
The key figures in the transformation remain in the same order as before.
Is this the way the generated program works. Is there any way to resequence the generated program based on the order of the key figures in the transformation.
Or deleting and recreating the transformation the only way.
Thank you,
Ravi.

if you have just changed the routine then it should not change the execution sequence...
can you make these changes at start routine itself??
Edited by: Sharayu Kumatkar on Apr 23, 2009 11:16 AM

Similar Messages

Delete Generated programs in transformations in SAP BI

Hi Experts,
I am facing an issue while deleting an old include program which was no more used in the transformation.
While deleting the include program its still showing that its used in the generated program.
But the transformation was deleted long back.
Now could some one help me in deleting the generated program and the include.
Thanks in advance.

Hi,
You need to deactivate the Function group and Function Module and delete the include program.
Regards,
Suman

Unable to activate transformation, error generating program

Hi,
We are currently on SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW Release 701 Support Package SAPKW70107
BI_CONT Release 705 Support Package SAPK-70501INBICONT
When I try to activate my transformation between 0PLANT and infosource ZPLANT_TEXT(Generated from 3.x infosource 0PLANT_TEXT), I get the below error message
Syntax error in GP_MET_RSTRAN_MASTER_TMPL, row 0 (-> long text)
Error during generation(Message no. RSTRAN511)
Error when resetting Transformation 06L8E7JA476EMLRHOX35W9KX6TMS8XSX to the active version(Message no. RSO410)
Long Text:
Syntax error in GP_MET_RSTRAN_MASTER_TMPL, row 0 (-> long text)
Message no. RG102
Diagnosis
SQL error 1654 occurred when accessing program GP_MET_RSTRAN_MASTER_TMPL part LREF.
When I check for the program GP_MET_RSTRAN_MASTER_TMPL in SE38 is does not exist.
Can anyone help me figure out this problem?
Thanks

I ran the program RS_TRANSTRU_ACTIVATE_ALL with below parameters
Source System = <logical system name of our src system>
InfoSource (* gen) = 0PLANT_TEXT
Got the error message as
Error generating program
Error generating program
Transfer structure 0PLANT_TEXT_DC NOT activated successfully Activate manually
Long Text:
Message no. RSAR245
Diagnosis
An error occurred during program generation:
Template: RSTMPL80
Error code: 6
Row: 0
Message:
Procedure
Correct the template to remove the problem.
Incase I give the InfoSource (* gen) = ZPLANT_TEXT
I get the message
No Transfer Structure Selected

How to delete the Generated files from application server(open hub)?

hi experts,
when i try to execute process chain the DTP it is giving below dump. Exception CX_RSBK_REQUEST_LOCKED logged.
when i execute the DTP manually and trying to delete the previous request, it is giving for dump ITAB_DUPLICATE_KEY.
so to delete the generated file from application server, how to delete it for specific dates?
Information on where terminated
Termination occurred in the ABAP program "GPD6S3OE0BCVGC6L9DBNVYQARZM" - in
"START_ROUTINE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 2874
of the (Include) program "GPD6S3OE0BCVGC6L9DBNVYQARZM".
The program "GPD6S3OE0BCVGC6L9DBNVYQARZM" was started as a background job.
and when i check the dump it is point out at below code
" Populate the lookup table for 0STOR_LOC
SELECT * from /BI0/TSTOR_LOC
into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
but the programme is syntactically correct only.
how to rectify the issue.
regards
venuscm
Edited by: venugopal vadlamudi on Sep 28, 2010 1:59 PM

hi experts,
We have written start routine to get the storage location text and sending to File located at Application server through OPEN HUB.
here is the code written in the Transformations
In the global section
Text for 0STOR_LOC
    DATA: l_0stor_loc_text TYPE HASHED TABLE OF /bi0/tstor_loc
          WITH UNIQUE KEY stor_loc.
    DATA: l_0stor_loc_text_wa TYPE /bi0/tstor_loc.
and in the code to get the text
" Populate the lookup table for 0STOR_LOC
    *SELECT * from /BI0/TSTOR_LOC*
      into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
      FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
              STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
im sure there is problem with the Routine only. i think i need to change the code if so please provide me the modified one.
thanks
venuscm
Edited by: venugopal vadlamudi on Sep 29, 2010 9:37 AM

Using SQVI To Generate Program in DEV

I have read a lot about the merits of using SQVI for simple queries and then generating the code and assigning to a transaction code so that others can run the query/report. I have found posts in this forum that suggest using SE93 to create a transaction code and assign the SQVI generated program is the only way that an SQVI query can be shared. I certainly hope they were not assuming that users have SE93 in a production environment??
My question is, if I create this query and generate the program in our DEV environment and then assign it to a transaction code, can this be transported from DEV to TST to PRD intact? Will this work?
One other question, when the program is generated does it also create the required authorization checks? I am using USR* tables for this report, nothing considered sensitive, would any additional authorizations be required to allow just about any user to run the transaction?
Disclosure, I am a power user and not an ABAP specialist.
I appreciate a speedy reply if that is possible.
Thanks
Mark

Hi Mark,
I have faced same requirement. I am not sure about transporting to TST and PROD. I done by this way.
After generating SQVI program in DEV , I assigned that program to a transaction and tested in DEV. Later i have regenarated SQVI in Production. then I assigned the generated Program to same transaction in DEV. And transported the Tcode assignment of program to Production..
About authorization , if its not sensitive report, BASIS can restrict at transaction level.
Regards,
Ravi.

RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ''

Hi,
While executing the below code i am getting the error
" RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ' ' am new to ABAP , can anyone kindly help me where i have went wrong ? .
IF ( V_DO_CDS_NAME_MAIN <> '' ).
    ABAP.
        DATA: ref_it_tab TYPE REF TO data,
              ref_wa TYPE REF TO data.
        FIELD-SYMBOLS: <fs_itab> TYPE ANY TABLE.
        FIELD-SYMBOLS: <fs_wa> TYPE ANY.
        FIELD-SYMBOLS: <fs_field> TYPE ANY.
        CREATE DATA ref_it_tab TYPE STANDARD TABLE OF (V_DO_CDS_NAME_MAIN) WITH NON-UNIQUE DEFAULT KEY.
        ASSIGN ref_it_tab->* TO <fs_itab>.
        SELECT * FROM (V_DO_CDS_NAME_MAIN) INTO TABLE <fs_itab> where C1 = V_WORK_ITEM_ID_MAIN.
        CREATE DATA ref_wa LIKE LINE OF <fs_itab>.
        ASSIGN ref_wa->* TO <fs_wa>.
        loop at <fs_itab> assigning <fs_wa>.
            assign component 'CLIENT' of structure <fs_wa> to <fs_field>.
            V_CLIENT = <fs_field>.
            assign component 'C0' of structure <fs_wa> to <fs_field>.
            V_C0 = <fs_field>.
            assign component 'C1' of structure <fs_wa> to <fs_field>.
            V_C1 = <fs_field>.
            assign component 'C2' of structure <fs_wa> to <fs_field>.
            V_C2 = <fs_field>.
            assign component 'C3' of structure <fs_wa> to <fs_field>.
            V_C3 = <fs_field>.
            assign component 'C4' of structure <fs_wa> to <fs_field>.
            V_C4 = <fs_field>.
            assign component 'C5' of structure <fs_wa> to <fs_field>.
            V_C5 = <fs_field>.
            assign component 'C6' of structure <fs_wa> to <fs_field>.
            V_C6 = <fs_field>.
            assign component 'C7' of structure <fs_wa> to <fs_field>.
            V_C7 = <fs_field>.
            assign component 'C8' of structure <fs_wa> to <fs_field>.
            V_C8 = <fs_field>.
            assign component 'MESSAGE_ID' of structure <fs_wa> to <fs_field>.
            V_MESSAGE_ID = <fs_field>.
            assign component 'TIMESTAMP' of structure <fs_wa> to <fs_field>.
            V_TIMESTAMP = <fs_field>.
            assign component 'EXTRACTKEY' of structure <fs_wa> to <fs_field>.
            V_EXTRACTKEY = <fs_field>.
            assign component 'STATEID' of structure <fs_wa> to <fs_field>.
            V_STATEID = <fs_field>.
            assign component 'DEVICE_ID' of structure <fs_wa> to <fs_field>.
            V_DEVICE_ID = <fs_field>.
        ENDLOOP.
    ENDABAP.
ENDIF.

Hi Mubeen,
While Copying the cotes have come closer otherwise its working fine , i was able to find the error .
There are ten predefined ABAP data types. There are 100 possible type combinations between these elementary data types. ABAP supports automatic type conversion and length adjustment for all of them except type D (date) and type T (time) fields which cannot be converted into each other.
I commented the TimeStamp part where i had given the ABAP Type as D and it started working .
But now i want to display the content of "TimeStamp" field but i am not able to do so .
This is the format in which it has to be displayed 2009.011.915.3353.
Which ABAPTYPE i need to use ?.
i am able to display in this format 20090119153353
regards
Harsha

How to generate XML from EBusiness suite ARXSGPO

Could someone tell me how I can generate XML from the EBusiness Suite Accounts Receivable report ARXSGPO.rdf I understand this report is called by a C program. I have tried changing the concurrent request to output format to XML the result does not resemble XML. Does anyone have any suggestions how I can generate XML from the ARXSGPO report?
Thanks,
Mark

Hi Mark
the next release of XMLP will have last page only support. The problem is that at the template layer you do not know how many lines are going to fit on the page, so you never know what is going to be the last page. The only way around it for now is to specify the number of lines to a page and then check when all the lines have been rendered and then render the remit portion.
I have a sample invoice that does the same, drop me a mail, you can work out the email from my name and the fact I work for XMLP Im sure.
Tim

Generate report from database using .xsl style sheet

I am trying to view test result histories for specific uut serial numbers.
We are logging all test data to the default access database template that was provided with Teststand.
Is there a method of generating reports from the database that match the format of those generated at runtime?
I was surprised to find that the default access database did not contain any gui or pre-made reports matching the xsl style sheets chosen in the report options dialog.
My database skills are weak, I am able to browse the raw data and I see the relationships between some of the tables, but the prospect of recreating one of the xml report formats in access seems daunting. Am I missing something? what is the best way to print a uut report from test data stored in access?

Hello msears,
Thank you for posting on the NI Discussion Forums. Unfortunately there are no tools available in TestStand for directly converting an Access database to a formatted .xsl report. It is possible to have a step in a sequence that reads the information from the database, and create the .xsl report as if it had been generated at sequence run-time, by writing those values directly to Locals.ResultList. Admittedly, this would require some knowledge of Microsoft Access, and the ability to write a program that will extract information from the database, in order to include it as a step in the sequence.
Is there anything stopping you from creating a formatted .xsl report when the sequence is run (instead of trying to create it from previous data stored in an Access database)?
Chris_G
Sr Test Engineer
Medtronic, Inc.

How can I book an employee for a training program from PD?

HI One and All,
Hope all of you Doing well...
I configured Personal Development and Training Event Management.
When I go for Profile Match-up, I found that One employee is lack-off some skills. I have a training program to fill those skills. How can I book that employee for training program from Pofile match-up screen?
Or is there any other way to book an employee for a training program from PD?
Thnaks,
Potru,

Hi Priya,
Thanks for your response, I check the option Generate training Praposals before running the profile match-up. I have created one training Event type (D) and i assigned qualification through A-028 relation.
Here one employee is lack of MS Office excellent skills for Assistant Manager position, I created Training Event (D) called MS Office training and assigned the qualification for this training program.
when I run profile match-up I got an Icon Training praposal (Tree symbol).
and also I have a column called Training , but it is blank.
I want to book that employee for that training progam (MS offcie training program), from Profile match-up screen.
I have selected the employee and I click on the Icon called Further Training. But the message is like Choose a valid line.
How can I send employee for MS Office training from profile match-up screen?
Please guide me...
Thanks,
Potru.

Problem in calling order import concurrent program from BPEL

Hi all,
Iam doing a sales order creation in oracle apps using Apps Adapter.
I have successfully inserted the order into the interface tables using an Apps adapter.
Now I need to run Order Import program from BPEL to move the data from interface tables to the base tables for which i use another Apps Adapter.
When I invoke the OEIMP concurrent program from BPEL ,request id is returned.But the concurrent program fails showing incomplete parameters.
But it works when I invoke it from the front end in oracle apps.
I think the problem lies in passing the inputs to the concurrent program from the BPEL.
Any help to solve the issue will be appreciated.
Thanks,
goutam

Previously, I was passing the values to the concurrent program variables through ASSIGN component,which resulted in some namespace issues.Then I replaced it with TRANSFORM component.
Also,First I assigned the values to the concurrent program variables as 'Vision Operations'(operating_unit), 'Online'(order_source) ,No (validate_only), No (validate_desc_flex) which are mandatory and just left non mandatory variables without assigning values.
I changed those values as *'204','0','N','N'*. And also set non mandatory variables value as EMPTY.
After doing all these I found the concurrent program catches all the parameter values correctly, and the records got imported from interface tables to the base tables.Thus the sales order got created successfully.
Thanks,
goutam

Need to change auto generated text from pdf report

I have implemented pdf but it generated text from the autogenrated xml.
If I need to change that text then what should I want to do for that?
Following is my xsl file and the generated output in pdf.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:fo="http://www.w3.org/1999/XSL/Format"
xmlns:fn="http://www.w3.org/2005/xpath-functions">
<xsl:output method="xml" indent="yes" encoding="utf-8" omit-xml-declaration = "yes" />
<xsl:template match="/">
<fo:root>
<fo:layout-master-set>
<fo:simple-page-master master-name="my-page">
<fo:region-body margin="1in"/>
<fo:region-before extent="1in" background-color="silver" />
</fo:simple-page-master>
</fo:layout-master-set>
<fo:page-sequence master-reference="my-page">
     <fo:static-content flow-name="xsl-region-before">
<fo:block height="150px" width="1024px" background-color="blue" >
<fo:external-graphic width="340px" src="http://localhost:9000/web-determinations9000/images/logo.png"/>
</fo:block>
</fo:static-content>
<fo:flow flow-name="xsl-region-body">
<fo:block >
<xsl:apply-templates mode="dump" select="/session/entity/instance/attribute"/>
</fo:block>
</fo:flow>
</fo:page-sequence>
</fo:root>
</xsl:template>
output from pdf -
What is Student Id?=
65.0
Is scored more than 80% true%=
true
What is Student Name?=
asf
What is lastname?=
asdf
Is student eligible for gold medal?=
true
If i want "what is student id?" text to only student Id then what change I need for that?

Hi,
Following is the code sample for your understanding:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:fo="http://www.w3.org/1999/XSL/Format"
xmlns:fn="http://www.w3.org/2005/xpath-functions">
<xsl:output method="xml" indent="yes" encoding="utf-8" omit-xml-declaration = "yes" />
<xsl:template match="/">
<fo:root>
<fo:layout-master-set>
     <fo:simple-page-master master-name="my-page">
          <fo:region-body margin="1in"/>
          <fo:region-before extent="1in" background-color="silver" />
     </fo:simple-page-master>
</fo:layout-master-set>
<fo:page-sequence master-reference="my-page">
     <fo:static-content flow-name="xsl-region-before">
          <fo:block height="150px" width="1024px" background-color="blue" >
          <fo:external-graphic width="340px" src="http://localhost:9000/web-determinations9000/images/logo.png"/>
          </fo:block>
     </fo:static-content>
     <fo:flow flow-name="xsl-region-body">
          <fo:block>
          <xsl:apply-templates mode="dump" select="/session/entity[@name='global']/instance[@label='global']"/>
          </fo:block>
     </fo:flow>
</fo:page-sequence>
</fo:root>
</xsl:template>
<xsl:template match="/session/entity[@name='global']/instance[@label='global']" mode="dump" priority="100">
     <fo:block margin-top=".5cm" margin-left=".1cm" border-start-style="solid">
          Student ID:<xsl:value-of select="attribute[@id='var_student_id']/number-val"/>
     </fo:block>
</xsl:template>
</xsl:stylesheet>Thanks,
Aakarsh

Hierarchy load - Error RSAR 683 Syntax error in generated program, row 0

Hi guys,
When I load the hierarchy on ZMATERIAL (load from 0MATERIAL hierarchy - source system BW), I have this error message : RSAR 683 Syntax error in generated program, row 0.
I have found several SAP notes, especially [Sap Note 944842|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler], but the implementation on our system does not change anything.
We are working on BW3.5 SP12.
Can anyone could tell me what to do ?
Will this issue be solved once we upgrade until SP18 as it is mentionned in the SAPNote ?
Thanks,
Alexandra
Edited by: Alexandra Guillaux on Apr 1, 2009 4:36 PM

Hello Alex,
after implementing the corrrection part of note 944842 via SNOTE, plaese also:
1. replicate datasource
2. activate transfer structure (report RS_TRANSTRU_ACTIVATE_ALL)
3. activate infoobject (make dummy change to description
of infoobject etc, save and activate it, remove change and save and
activate it again).
Hope it could resolve the incident.
Thank you & Best regards,
Vince

Calling Concurrent program from OAF-PDF Outtput not in English

Hi ,
I've successfully done "Calling Concurrent Program from OAF" once i clicked the button which i have in my page it generates RequestID and that shows request page,In that when i click "Output" icon the PDF file is opened.
But in that PDF file it shows the datas in the different language.
For example Emp name column is shown as
ΚΙΝΓ
ΧΛΑΡΚ
ΣΧΟΤΤ
ΦΟΡ∆
ΣΜΙΤΗ
ΑΛΛΕΝ
Αδαµσ
Σεντηιλςελ
Σαραϖανα Χ
Σεενυ
Σαβενα
Ηαριkindly help me...
Regards,
Saro

Hi Hussein,
Here I've shown the details of log file
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXCON module: XXCON
Current system time is 29-DEC-2010 11:37:23
+-----------------------------*
*| Starting concurrent program execution...*
+-----------------------------*
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
Report Builder: Release 10.1.2.3.0 - Production on Wed Dec 29 11:37:29 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Executing request completion options...
------------- 1) PRINT   -------------*
Printing output file.
Request ID : 5865903
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 29-DEC-2010 11:37:33
Regards,
Saro

Problem in transporting generated program of SAP Query

<h5> Hi all,
I created a SAP query in development server and generated the program for the same, I transported the infoset and the user group etc. to the next server but couldnot transfer the program, since the program is not a Z Program, so coudlnot save it and capture it in request so that the same can be transported.
What could be the possible solution for the same????
Regards, </h5>

Yep, this gets a bit tricky. Remember that SAP Query is designed as an end-user tool. To this end, the creation of queries could be done in a productive environment. The maintenance of infosets could be restricted to Development systems only. I know that some sites do not allow this.
Through the use of authorisations, you could appoint an administrator to generate the queries in PRD for the users.
The name of the ABAP is a combination of the query name, infoset and the client number (I think - going from memory). You could possibly change the package name of the generated program and then attach it to a transport, but it becomes very messy and I wouldn't recommend it.

Call ABAP program from Unix script passing dynamic filename

Hi,
Does anyone know if it is possible to call an ABAP program from a Unix script passing a dynamic filename to the ABAP program?
We are receiving a file from an external company and on receipt of the file want to call an ABAP program passing the filename. The filename is made up of File ID, Date and Time which we need to read in the ABAP program. We usually use Events to trigger a program which is fine when the filename if static however since this filename will be dynamic we cannot do this. In addition we cannot just rename the file to a static name in the Unix script as we need to know the value of the date and time from the file ID in the ABAP program. I can change the ABAP program to check our /in directory for a Filename that starts with the fixed File ID however I thought there must be a better way of doing this. We want the external company to put this information in a file header record but they don't want to change the file contents. Any ideas would be appreciated.
Thanks,
Sinead.

You could follow the following method
1.Let the external file reside in the SAP application layer in a defined path e.g. /usr/sap/tmp/interface/working/
2.Write an ABAP program which will include the following steps:-
i) read all files in the file path using function module EPS_GET_DIRECTORY_LISTING
ii) Read the data from files existing in the directory using OPEN_DATASET statement
iii) After the files have been read move the files to another directory e.g. /usr/sap/tmp/interface/backup/ or you can delete the file.
3.Schedule this program to be executed depending on the frequency of the external file being generated.

Generated Program from transformation

Similar Messages

Maybe you are looking for