Generating a report for non-existent apps?

I have 200+ machines on my network and manage mostly through ARD, I am trying to figure out a way to generate a list of computers that DO NOT have a specified app installed. Can this be achieved through either ARD, AppleScript or a combination of both?

well if you send unix command and do some thing like:
ls -al /Applications/Firefox.app
if it's not there , you would get back
ls: /Applications/Firefox.app: No such file or directory
BUT that dosen't tell you what verion is installed.
you could do send unix command:
defaults read /Applications/iPhoto.app/Contents/version.plist CFBundleShortVersionString
if it's installed you'll get back some thing like:
9.2.1
if not installed you'll get back some thing like.
The domain/default pair of (/Applications/iPhoto.app/Contents/version.plist, CFBundleShortVersionString) does not exist

Similar Messages

EWA report for non-abap systems

Hi Gurus,
Good day.
I would like to ask, what are the steps that I'm going to do when configuring an EWA report for non-abap systems i.e portal. Do Ineed to install SMD agents on my non-abap systems and connect to diagnostic agent of solman?
Or do I need to install wily introscope agents on my non-abap systems and connect to diagnostic agent?
It is both? Which one?
It would be also great if you can provide me links/documents in relation to my queries.
Please do note that the current version of solman system is 7.1
Thanks in advance for the help
Virgilio

Hi Virgilio,
To generate an EWA report for Java stack system,
you need to do following:
1. install smd agent (diagnostics agent) on Java stack system
you can install this agent standalone, details see note 1234384.
The installation Guide is also attached in note 1234384.
2. finish Initial Config and Basic Configuration in solman_setup for
solman system, the setting about Enterprise Manager is also included
in these configurations, please ensure EM is running properly.
3. start managed system configuration for the EP system in solman_setup
after selecting the system type 'Java', please finish all steps as
suggested in which step. The Step 'Wily Introscope Configuration' is to
install Introscope Agent which is used for Java stack system. More infor
please read the installation Guide of Enterprise Manager and note
797147.
4. You should be able to see data in Wily Introscope and Workload
analysis via
Root Cause Analysis->End-to-End Analysis->select the system->Workload
Analysis
5. If the EP system is added in a solution, the EWA task for this system
should be shown up in solman's SDCCN.
Also check note: 976054"
Thanks
Regards,
Vikram

Unable to generate Pdf report for crystal 9/10 in Windows 2012 (Standard) server with Times New Roman font. With same font, report getting generated in excel, text, csv format in Windows 2012.

For Times New Roman font in Windows server 2012 R2 (Standard), crystal 9/10 report in pdf format is not getting generated. When we change the font for specific report like Arial, Calibri , Cambria then pdf report getting created.
In Windows 2008 R2, same application worked fine to generate pdf report for TimesNewRoman font and there is no change done in the application which is being used in Windows 2012 R2 server.

Ok, thanks for the reply. You need to contact support or a forum for the Crystal software. Third party products don't usually include Adobe technology, they have their own software. When you contact them, you may want to expand "unable to generate" to give any specific symptoms including any error messages.

Does Solution Manager support Service Report for non-abap?

Does Solution Manager support Service Report for non-abap?
We can schedule and view reports for ABAP but for all the non-ABAP such as J2EE stack (PORTAL) we can not pull out a report.
If the answer is yes please let me know where I can get the documentation of how to setup SLA for PORTAL or non-ABAP.
I found a document on EWA non-abap but non for SLA.

Hi
actually i am in task of setting up ewa for portal.
i had already done with abap components (ewa and sla)
i stronly believe one of the pre-requiste to get sla is EWA.
so i think if u can setup ewa for portal then you can get sla too.
Regards,
Vijay.

Automating a report for non-Crystal Reports users

Post Author: dmdouglas
CA Forum: Formula
I using version 8.5. Several people I generate a specific report for would like to be able to run it themselves rather than ask me to run it for them. As they are not Crystal Report users, is there a command that will ask the user to input information that will be used to generate a report for a specific month when they run the report, rather than having to go into the select criteria to put in the date they want? For example, if they wanted a report for March, they would just have to answer a prompt like "What month?" and the program would put their response in a variable to calculate the period desired for the report.

Post Author: V361
CA Forum: Formula
Not sure for 8.5, but in later release's you add a parameter, the parameter does the prompting "Sort of", then you set the select statement to use the parameter. Parameters will have ? as part of the field name. ie...
= { ?Date_Parameter}

Query to generate a report for incoming pending payments as per Item Group!

Dear All,
I need a Query to generate a report for incoming pending payments through Item Group.
Please provide me the same.
Thanks in advance..........................
Edited by: Param Deshwal on Nov 22, 2011 7:11 AM

Hi
try this
SELECT T0.[DocNum] as 'Invoice Number', T0.[DocDate] as 'Invoice Date', T0.[CardName], T0.[DocTotal] as 'Invoice Amount', T0.[PaidToDate] as 'Paid Amount',(T0.[DocTotal]-T0.[PaidToDate]) as 'Pending Amount',T3.[ItmsGrpnam] FROM OINV T0 Inner join inv1 t1 on t0.docentry=t1.docentry inner join oitm t2 on t2.itemcode=t1.itemcode inner join oitb t3 on t3.[ItmsGrpcod]=t2.[ItmsGrpcod] where T3.[ItmsGrpnam]=[%0]
Regards,
sudhir B.
Edited by: B.sudhir on Nov 22, 2011 7:28 AM

ISight not working for non-Apple apps under particular user account

I noticed that my iSight built into Macbook Pro 15" is not working anymore for non-Apple apps (Skype and Webex at least) and working for Facetime and Messages Beta under same account.
I tried to test it using different account on OS X with Skype and it is working great!
I'm using 10.7.3.
Any advice?

Hi,
I take it that in System Information the camera is listed under USB items ?
Your speps say OS x 10.7.2
Have you updated to OS X 10.7.3 ?
If you have I would start with that by doing a COMBO Version (Not using Software Update)
This will be everything that has been updated since OS X 107 came out and may catch those hard to trace issues.
Using the FInder > Go Menu > Hold the ALT key and Select the Library that appears > then navigate to Preferences.
In here find the Skype .plist.
Open it with Quick Look.
Can you capture that (Apple/CMD ( or ⌘) + Shift + 4 together (Also tap space bar at the end to get the Window) ) ? and post it here.
I don't use Skype and don't have the .plist to see if it lists the camera.
If it does it might pay to delete the.plist and force Skype to re-***** the hardware. (It also depends how much of your other settings are in there)
In the meantime if you go to the Skype Preferences can you see a Preview of the camera ?
Can you turn Off access to the camera and turn it On again in Skype ?
Skype does use Flash Player to do the Video.
Is Webex a browser led thing that uses Flash ?
If it looks like it is a Flash Issue do you have the GoogleTalk Video Plugin installed (there is a standalone and it is part of Chrome) ?
9:08 PM Saturday; February 18, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Generating a report for clients that are not registered

Hi - Hopefully someone can assist. We are looking to generate a report in SCCM 2012 that will tell us if a client is properly registered, and most recent scan.
I can't seem to find a generic report for this task, so does anyone know if one exists - or how to create a custom one?
Thanks!

what means "properly registered" in your eyes? To me, if it was able to communicate at all--heartbeat; that means it had to have registered. But maybe you have a different criterion.
So I think what you want is simply something like...
select s.Netbios_Name0, max(disc.AgentTime) as LastHeartbeat
from v_r_system s
left join v_agentDiscoveries disc on s.resourceid=disc.resourceid
and disc.AgentName = 'Heartbeat Discovery'
Group by s.Netbios_Name0
order by LastHeartbeat desc
where the most recent heartbeat at the top; and boxes with no heartbeat reported will be null at the bottom. If you don't want to even "see" the boxes that have never reported a heartbeat successfully, then don't left join, use just Join
You could also use v_r_system_valid, instead of v_r_system. As you can tell by the name, _valid means that CM itself has determined those are valid clients; so that might be what you think of as "properly registered".
It all boils down to what means "properly registered" to you, and what you mean by "recent scan". is a recent scan a heartbeat? a software update scan? hardware inventory reported? and what means "recent". the sample above is
reporting on anything and everything regardless of date.
As for default reports, you're saying that the default reports in "Client Status" don't fit your criteria?
Standardize. Simplify. Automate.

Application hangs for non existing value

Hi,
At the DB level I tried to query non existing value from the table, query came out with "no rows selected" . But when I try to do the same from front end, application hangs! I just checked in the statspack report it shows like query is taking more cpu time to execute. what could be the reason for this?
when I join the v$session,v$sql to get the currently running query on database, it shows the query which try to execute from the application as active.
why it is hanging in application and why not in DB?
can any one brief me on this regard? why does application hangs for non exsting value?
With Regards
Boo

Hi,
At the DB level I tried to query non existing value from the table, query came out with "no rows selected" . But when I try to do the same from front end, application hangs! I just checked in the statspack report it shows like query is taking more cpu time to execute. what could be the reason for this?
when I join the v$session,v$sql to get the currently running query on database, it shows the query which try to execute from the application as active.
why it is hanging in application and why not in DB?
can any one brief me on this regard? why does application hangs for non exsting value?
With Regards
Boo

More Lion issues - Throwing Console errors for non-existent application

Again, with the bad side of Lion.
I was receiving all kinds of console errors in Lion with TweetDeck and Adobe AIR apps so I de-installed these applications and removed them from the system. However, Apple's fantastic Lion Operating System still is complaining about them even though they are not to be found.
In the console I am getting sandbox errors on locations and files that are non-existent. Below is a snapshot of the error messages, and the directory referred to: /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.... and the others DON'T EVEN EXIST!!
How do I keep this from happening? Why does the OS go after this when it's been removed?????
8/20/11SaturdayAugust 5:30:14.113 PM    mdworker32    kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
8/20/11SaturdayAugust 5:31:11.000 PM    kernel    nstat_lookup_entry failed: 2
8/20/11SaturdayAugust 5:31:44.239 PM    com.apple.SecurityServer    Session 100071 created
8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ .fl89CB8354, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/.fl89CB8354, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ .fl89CB8354, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:32:01.234 PM    Preview    snapshot of document took: 0.00030899 secs, calling unblockUserInteraction
8/20/11SaturdayAugust 5:32:01.318 PM    Preview    writing of document took: 0.083616 secs, success = YES
8/20/11SaturdayAugust 5:32:42.333 PM    rpcsvchost    sandbox_init: com.apple.msrpc.netlogon.sb succeeded
8/20/11SaturdayAugust 5:32:42.483 PM    sandboxd    ([66316]) smbd(66316) deny job-creation
8/20/11SaturdayAugust 5:32:42.583 PM    rpcsvchost    sandbox_init: com.apple.msrpc.srvsvc.sb succeeded
8/20/11SaturdayAugust 5:32:42.609 PM    smbd    anonymous connected to path /var/rpc/ncacn_np
8/20/11SaturdayAugust 5:32:53.587 PM    sandboxd    ([66320]) rpcsvchost(66320) deny mach-lookup com.apple.distributed_notifications@1v3
8/20/11SaturdayAugust 5:34:53.329 PM    smbd    anonymous connected to path /var/rpc/ncacn_np
8/20/11SaturdayAugust 5:39:32.429 PM    mdworker32    kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.

Don't know how you de-installed but you didn't fully uninstall them. If you did not have an uninstaller supplied with the applications, then here's what you need to consider in order to fully uninstall:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.

How to generate a report for all Analyses which conatins a specific column

Hello Experts
I am trying to generate a report of all Analyses which contains a specific column. We are currently using OBIEE 11.1.1.7.0.
I have tried to use the command line options using ./runcat.sh, but did not find any arguments that can filter the analyses by a specific column used.
Any help is much appreciated.
Regards
Rakesh

Hi Rakesh,
SampleApp has your answer: everything is available for free, just copy/paste and run on your own instance.
http://slc02ojw.oracle.com:7780/analytics/saw.dll?Dashboard&PortalPath=%2Fshared%2F10.%20Lifecycle%20and%20Admin%2F_port…
(as long as this instance will be up...)
In the dashboard named "10.31 Webcat Analysis" you have a columns to analysis report where you select the presentation column and you get all the reports using it.
This dashboard require a script to be run on your catalog, it will parse it and extract all the column info (and many other interesting things) and load it in a database. The scripts are simple and well documented, so you can easily adapt them to your own environment.
If you want the script there is no miracle solution: download SampleApp and extract it (it's not small, but with all the great content it has we can't complain about that ...).

Malfunction in generating word report out of an app (using the report generation toolkit)

I placed in my program some features that generate a word report with some graphics and text using the report generation toolkit. When I'm in the developing system everything works. But the point is that I have to create an exe for a user and in testing this the report is not generated (and no error msg occurs). Does anyone handeled this problem already and could give me some hints? Thx.

Hi muchalla,
the report generation toolkit for MS office depends on the version of MS Office (not the OS). You must generate your application for the version of MS Office or use some dynamic technic.
The different versions of the llbs you need are on the CD in a subfolder called compability.
Here I have asked if some ideas to do this will work. Until now I haven't got the time to verify it by myself.
You will find here more information about using the report toolkit with applications.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Inserting the default value for non existing date

hello,
i am designing a matrix report for payslip for month wise in oracle 6i report builder.
in that i want to display per day working hours of the month.
i m using following query for achieving my goal :
select a.paycode,b.empname,c.departmentname,to_char(a.dateoffice,'DD') dateoffice,a.shiftattended,round(decode(a.hw,0,a.mannual_hours,a.hw),0) hw,
a.ISMANNUAL,A.STATUS
from tbltimeregister1 a,
     tblemployee b,
      tbldepartment c
where a.paycode=b.paycode and
(a.hw >0 or a.mannual_hours is not null ) and
a.departmentcode='D05' AND
a.departmentcode=c.departmentcode and
a.dateoffice between to_date('01/12/2012','dd/mm/yyyy') and to_date('31/12/2012','dd/mm/yyyy')
ORDER BY A.PAYCODE,A.DATEOFFICEit is displaying the hours for the date in b/w date ranges exist in master table.
my problem is that if any date of a month is not in master data ,it should display the given date in DD format with 0 hours , A(absent) status, and null shift by default.
pl tell me how to modify my query for getting my desirable result.
Thanking You
Regards
Vishal Agrawal

965354 wrote:
hello,
select a.paycode,b.empname,c.departmentname,to_char(a.dateoffice,'DD') dateoffice,a.shiftattended,round(decode(a.hw,0,a.mannual_hours,a.hw),0) hw,
a.ISMANNUAL,A.STATUS
from tbltimeregister1 a,
tblemployee b,
      tbldepartment c
where a.paycode=b.paycode and
(a.hw >0 or a.mannual_hours is not null ) and
a.departmentcode='D05' AND
a.departmentcode=c.departmentcode and
a.dateoffice between to_date('01/12/2012','dd/mm/yyyy') and to_date('31/12/2012','dd/mm/yyyy')
ORDER BY A.PAYCODE,A.DATEOFFICEit is displaying the hours for the date in b/w date ranges exist in master table.
my problem is that if any date of a month is not in master data ,it should display the given date in DD format with 0 hours , A(absent) status, and null shift by default.
pl tell me how to modify my query for getting my desirable result.Your problem isn't exactly clear to me. How do you pass the dates to be compared to the DateOffice column? It will be better to ensure the Master table contain data for each date (with some default values) and you will not have to tweak your sql.
Below is a possible solution:
select *
from
select a.paycode,b.empname,c.departmentname,to_char(a.dateoffice,'DD') dateoffice,a.shiftattended,round(decode(a.hw,0,a.mannual_hours,a.hw),0) hw,
a.ISMANNUAL,A.STATUS
from tbltimeregister1 a,
     tblemployee b,
      tbldepartment c
where a.paycode=b.paycode and
(a.hw >0 or a.mannual_hours is not null ) and
a.departmentcode='D05' AND
a.departmentcode=c.departmentcode and
a.dateoffice between to_date('01/12/2012','dd/mm/yyyy') and to_date('31/12/2012','dd/mm/yyyy')
union
select a.paycode,b.empname,c.departmentname,to_char(&date_variable,'DD') dateoffice,null,round(decode(a.hw,0,a.mannual_hours,a.hw),0) hw,
a.ISMANNUAL,'A'
from tbltimeregister1 a,
     tblemployee b,
      tbldepartment c
where a.paycode=b.paycode and
(a.hw >0 or a.mannual_hours is not null ) and
a.departmentcode='D05' AND
a.departmentcode=c.departmentcode and
ORDER BY A.PAYCODE,A.DATEOFFICEIf this is not what you are looking for, then
1. Post a script that helps us to create the Tables required in your query
2. Some sample data. That includes the data for master table that has missing dates (4-5 rows should suffice)
3. The expected results from the sample data you posted.
Please do not forget to mention your version:
select * from v$version;

EWA reports for non abap systems

Hello gurus,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD (data source SLd)and assigned Logical component to java system.
>>> But when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system in the SMD.
In the SMD i can see just the abap systems for which the EWA are being already generated.
(i have done also configuration>>connecting managed sytem to the SMD, but i still cannot connect my Portal system to SMD)
Do you have any idea, what i have done wrong?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system , EP SPS 19
Thank you very much for your points!!

Hello Jagan,
I was following the enclosed guide from the note: 976054, but it doesn't help to solve my issue.
And when i want to permorm the setup for the managed systems,(http://<host><port>/smd -> diagnostic setup->managed systems ->setup wizard) i can not see there my Portal systems, just the abap systems.
Do you have any idea?
Thanks,
Best regards
Slavomir

Generate DB reports for many Schema's automatically.

Hello,
I am using ORACLE DB 11g R1 & RHEL 5.
I have a DB server the MAIN SERVER in which i have many schema's and i have scheduled a crontab job to take a backup of each schema
on a daily basis. The same backup file (.dmp) is then imported to a BACKUP SERVER machine for the same schema name.
The bottom line is i am trying to keep a backup server ready with me with the data uptill the last day. So if the
main server goes down due to some reason the developers can connect to the backup server and continue working.
Meanwhile i can analyse and bring the main server up again.
I want an idea buy which i can keep both the server machine ( MAIN & BACKUP ) in the sync of the data and
i should be able to generate a report automatically every day which schema has been backedup & imported.
If they have failed then for what reason.
Please advice me some proper solution. If you have other ideas let me know.
I want a proper system which will keep the data of MAIN & BACKUP server the same and if the MAIN server goes down
it should be able to connect to BACKUP server and continue.
Thanks in advance.

The same backup file (.dmp) is then imported to a BACKUP SERVER machine for the same schema name.Is it forcibly imported every day ? Why ? Why not import it only when you need to ?
OTOH, if the export and import processes are automated and self-running you have already resolved your "problem".
However, is it really a requirement to have an alternate (aka "BACKUP") Development server ? Is it a requirement to have this synchronised with the schema and data of the primary Development server as of the end of the day ? What does your development team lose if it is, say, a few days behind ? Can they not reapply their changes ? How many developers and how many daily changes put together justify the cost of this mechanism ?
(How about Production ? How is it protected ?)
Hemant K Chitale

Generating a report for non-existent apps?

Similar Messages

Maybe you are looking for