Generic Datasource eventhough delta enabled not working
Hi Experts,
I have created a Datasource by creating a Function Module and also this function module i copied and did the changes the function module i used as a template is RSAX_BIW_GET_DATA_SIMPLE
and after creating the thing i have created a generic delta by using LAST_CHANGED_ON date as delta specific field and i have initialized the delta its fine it creating an entry in RSA7
in my first init load i got 4000 records so immly i have done delta again it brought 4000 but when i checked in RSA7 for delta their are no records but still its brining 4000 records ...but as per my assumption it should not get any records becoz we already got the delta.
Thanks and regards
Sreedhar
Hi
Even after making changes to code its still bring all the records with each load.
below i am pasting my code please advise what is that i am doing wrong so that delta is not getting picked up. instead every time its a full load.
FUNCTION ZRSAX_BIW_GET_DATA_SIMPLE.
""Local Interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA TYPE ZDPR_DASHBOARD_T OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
Example: DataSource for table SFLIGHT
TABLES: DPR_DASHBOARD.
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
S_COUNTER_DATAPAKID LIKE SY-TABIX,
cursor
S_CURSOR TYPE CURSOR.
DATA : LF_OBJECT TYPE EVE_TV_OBJECT_GUID.
DATA : LF_DATE TYPE DPR_TV_LAST_CHANGE_DATE.
Select ranges
RANGES: L_R_OBJECT FOR LF_OBJECT .
RANGES: L_R_DATE FOR LF_DATE.
L_R_CONNID FOR SFLIGHT-CONNID.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
buffer input parameters
prepare data selection
Check DataSource validity
CASE I_DSOURCE.
WHEN 'ZDPREXTRACTION'.
WHEN OTHERS.
IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
LOG_WRITE 'E' "message type
'R3' "message class
'009' "message number
I_DSOURCE "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDCASE.
APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
S_S_IF-REQUNR = I_REQUNR.
S_S_IF-DSOURCE = I_DSOURCE.
S_S_IF-MAXSIZE = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'OBJECT_GUID'.
MOVE-CORRESPONDING L_S_SELECT TO L_R_OBJECT.
APPEND L_R_OBJECT.
ENDLOOP.
LOOP AT g_t_select INTO l_s_select WHERE fieldnm = 'LAST_CHANGE_DATE'.
MOVE-CORRESPONDING l_s_select TO l_r_date.
APPEND l_r_date.
ENDLOOP.
ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT (S_S_IF-T_FIELDS) FROM DPR_DASHBOARD
WHERE LAST_CHANGE_DATE in l_R_DATE. "AND
OBJECT_GUID IN L_R_OBJECT.
ENDIF. "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA
PACKAGE SIZE S_S_IF-MAXSIZE.
IF SY-SUBRC <> 0.
CLOSE CURSOR S_CURSOR.
RAISE NO_MORE_DATA.
ENDIF.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF. "Initialization mode or data extraction ?
ENDFUNCTION.
Regards
Sreedhar
Message was edited by:
Sreedhar M
Similar Messages
-
I have copied the 0datasource to Zdatasource.but delta is not working
Hi All,
i have copied the datasource from 0ASSET_ATTR_TEXT to ZASSET_ATTR_TEXT. the init is working fine and the Delta is not working for this.
while coping the datasource i have updated the tables
Roosource, roosourcet, roosfeild. Is that enough,
kindly help me on this
regards
KA
Message was edited by: A K
Message was edited by: A KHi vishnesh,
It is not a generic datasource, i have copied the datasource thru a Zprogram.
and when i run the RSA3 for the F update mode for the Both datasources(Z and 0) they are perfect. but when i run for D mode it is getting the errors for both the daasources.
Regards
KA
Message was edited by: A K -
Generic extractors as delta enabled
Hi Experts,
I am looking for a thread or Blog that describes the steps to enable Generic extractors as delta enabled.
AlokHi,
Goto--> RSO2 -> Enter your datasource name->Press on Generic Delta
Select one in Delta Specfied field...
U can set any of the below 3 based on ur reqmnt..
Time stamp or Calender day or numeric Pointer.
How to Create Delta..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Generic.. SAP Help
http://help.sap.com/saphelp_nw2004s/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Generate_a_generic_DataSource
Thanks
(Assign Points if useful..) -
Generic datasource with Delta queue
Hi All,
I 've created a generic datasource on prices tables A* and KONP. Next, I used HowTo document "create generic datasource that uses delta queue", finding the right BTE that could catch prices modification. Up to this point, everything works fine.
I've extracted an Init delta to BW and now, on R/3, in RSA7, I can see a delta queue for my generic datasource.
When I modify price conditions in VK12, BTE works fine and I can see the counter in RSA7 increasing. I also can see new entries in table TRFCQOUT with status READY. (either in SE16 or in SMQ1 )
The problem is :
- in RSA7, if I want to display the posted data, system returns an empty list (whereas the counter is different from 0)
- when I run a delta InfoPackage, no data is sent to BW, but in table TRFCQOUT, status has been changed to READ for entries that previously had status READY (and old entries that had status READ due to a previous delta upload are deleted)
Does anyone has any idea about the reason of the issue ?
Thanks for any help
AJSure, I can.
The problem was in the specific coding that update the delta queue : not all the fields were updated and some of these fields were used as selection criteria in th delta infopackage...
in RSA7, when you try to see the data in the queue, the system only shows you the records that match the selection criterias of your delta IP...so in our case, because of those empty fields, no records were selected...
AJ -
Delta update not working when i change material master data
Hi SAP Guru's
can any body help me in solving my issue.
My issue is i created a data source with a function module to create delta in change date field LAEDA.
.Full upload is working fine based on the selection screen but delta update is not working properly .
it is working as full load run for every first run of the day.
Please can any body help me in this.
What i did in ECC.
I copied the FM 'RSAX_BIW_GET_DATA_SIMPLE to Z function module.
Done a select on three tables and passed the data into e_t_data
In Rso2 i attached LAEDA filed after clicking generic delta field.
after completing the steps in ECC
Any help will be apperitiated .
Thanks in advanceDid you actually change the sold-to party though or just the payer? The sold-to party's price list type controls the price list type value copied into the order header. Even if the payer has a different value, it's not copied to the order header. You can see this behavior in FV45KFKD_VBKD_FUELLEN. If you switch sold-to's then you should get a pop-up that new pricing was carried out; you should also see your new price list type value in the order header and you can use the 'analysis' function at the item level to verify that the correct price was used.
-
Generic Datasource with Delta and functionmodule
Hi together,
who can help me ??
Ihave created a generic datasource with function module and
delta.
the extractor runs well while i use full update and also initialization.
If i start the delta extraction, the extractor crashed with short-dump.
the message is SAPSQL_INVALID_FIELDNAME
What can i do, and what is wrong.
regards
thorsten WeissHi Roberto,
here is the code from the function-module:
FUNCTION zbw_mm_get_eket.
""Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
*" VALUE(I_DSOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE DEFAULT 1000
*" VALUE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SBIW_BOOL DEFAULT SBIW_C_FALSE
*" TABLES
*" I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*" E_T_DATA OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
INCLUDE lrsalk01.
DataSource for table EKET
TABLES: zv_mm_eket.
interne Tabelle für Bearbeitung
DATA: itab_0 TYPE TABLE OF zstr_eket WITH HEADER LINE.
TYPES: BEGIN OF typ_categ,
j_4kbwef TYPE atnam,
/afs/bwel TYPE j_4kbwef,
END OF typ_categ.
DATA: l_s_data_eket TYPE zstr_eket,
ld_cat_struct TYPE j_4kcsgr,
lt_cat_fields TYPE TABLE OF j_4kcif001,
ls_cat_fields TYPE j_4kcif001,
ls_mara TYPE mara,
l_tabix LIKE sy-tabix,
itab_cat TYPE TABLE OF typ_categ ,
ls_cat TYPE typ_categ,
h_feldsize1(8) TYPE c,"wegen Typ-konflikt im FB
h_feldsize2(8) TYPE c."wegen Typ-konflikt im FB
Auxiliary Selection criteria structure
DATA: l_s_select TYPE rsselect.
Maximum number of lines for DB table
STATICS: s_t_select LIKE rsselect OCCURS 0 WITH HEADER LINE,
s_t_fields LIKE rsfieldsel OCCURS 0 WITH HEADER LINE,
counter
s_counter_datapakid LIKE sy-tabix,
cursor
s_cursor TYPE cursor.
Select ranges
RANGES: l_r_ebeln FOR zv_mm_eket-ebeln,
l_r_ebelp FOR zv_mm_eket-ebelp,
l_r_bsart FOR zv_mm_eket-bsart.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
buffer input parameters
prepare data selection
Check DataSource validity
CASE i_dsource.
WHEN 'ZDS_V_MM_EKET'.
WHEN OTHERS.
IF 1 = 2. MESSAGE e009(r3). ENDIF.
this is a typical log call. Please write every error message like this
log_write 'E' "message type
'R3' "message class
'009' "message number
i_dsource "message variable 1
' function modul was created for DS ' &
'ZDS_V_MM_EKET"!'.
"message variable 2
RAISE error_passed_to_mess_handler.
ENDCASE.
APPEND LINES OF i_t_select TO s_t_select.
Fill parameter buffer for data extraction calls
S_T_SELECT-REQUNR = I_REQUNR.
S_T_SELECT-DSOURCE = I_DSOURCE.
S_T_SELECT-MAXSIZE = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
APPEND LINES OF i_t_fields TO s_t_fields.
ELSE. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF s_counter_datapakid = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
LOOP AT s_t_select INTO l_s_select WHERE fieldnm = 'EBELN'.
MOVE-CORRESPONDING l_s_select TO l_r_ebeln.
APPEND l_r_ebeln.
ENDLOOP.
LOOP AT s_t_select INTO l_s_select WHERE fieldnm = 'EBELP'.
MOVE-CORRESPONDING l_s_select TO l_r_ebelp.
APPEND l_r_ebelp.
ENDLOOP.
LOOP AT s_t_select INTO l_s_select WHERE fieldnm = 'BSART'.
MOVE-CORRESPONDING l_s_select TO l_r_bsart.
APPEND l_r_bsart.
ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
OPEN CURSOR WITH HOLD s_cursor FOR
SELECT (s_t_fields) FROM zv_mm_eket
WHERE
ebeln IN l_r_ebeln AND
ebelp IN l_r_ebelp AND
bsart IN l_r_bsart.
ENDIF. "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR s_cursor
APPENDING CORRESPONDING FIELDS
OF TABLE e_t_data
PACKAGE SIZE i_maxsize.
FETCH NEXT CURSOR s_cursor
APPENDING CORRESPONDING FIELDS
OF TABLE itab_0
PACKAGE SIZE i_maxsize.
LOOP AT itab_0 INTO l_s_data_eket.
l_tabix = sy-tabix.
Lesen Erstellungsdatum aus EKKO
SELECT SINGLE aedat FROM ekko INTO l_s_data_eket-sydat
WHERE ebeln = l_s_data_eket-ebeln.
Lesen Partner aus EKPA
SELECT SINGLE lifn2 FROM ekpa INTO l_s_data_eket-plief
WHERE ebeln = l_s_data_eket-ebeln AND
ebelp = l_s_data_eket-ebelp AND
ekorg = l_s_data_eket-ekorg AND
werks = l_s_data_eket-werks .
IF NOT l_s_data_eket-matnr IS INITIAL .
*A Lesen material für Kategoriestruktur j_4kcsgr(F001 oder R002)
CLEAR ls_mara.
CALL FUNCTION 'J_3A1_LESEN_MARA_SINGLE'
EXPORTING
i_matnr = l_s_data_eket-matnr
IMPORTING
e_mara = ls_mara
EXCEPTIONS
param_not_valid = 1
OTHERS = 2.
IF sy-subrc NE 0.
ENDIF.
*E Lesen material für Kategoriestruktur j_4kcsgr(F001 oder R002)
*A Aufsplitten Bestandskategorie
REFRESH lt_cat_fields.
CALL FUNCTION 'J_4KG_SPLIT_CAT'
EXPORTING
client = sy-mandt
csgr = ls_mara-j_4kcsgr
cat_appl = 'S'
cat_value = l_s_data_eket-j_4kscat
NECESSARY_SPECIFIED = ' '
TABLES
cat_fields_tab = lt_cat_fields
EXCEPTIONS
no_category_structure_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE."sy-subrc <> 0
Verarbeitung der Ergebnisse
LOOP AT lt_cat_fields INTO ls_cat_fields.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_SCONFIG'.
l_s_data_eket-zz_bwel_sconfig = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_CONFIG'.
l_s_data_eket-zz_bwel_config = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_COUNTRY'.
l_s_data_eket-j_3abwel_country = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_COUNTRYGRP'.
l_s_data_eket-zz_bwel_coungrp = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_STOCKTYPE'.
l_s_data_eket-zz_bwel_stktype = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_ORDER'.
l_s_data_eket-zz_bwel_order = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_QUALITY'.
l_s_data_eket-j_3abwel_qual = ls_cat_fields-j_4kcatv.
ENDIF.
ENDLOOP."lt_cat_fields
ENDIF.
*E Aufsplitten Bestandskategorie
*A Aufsplitten MAtrix
IF NOT l_s_data_eket-j_3asize IS INITIAL.
CALL FUNCTION 'J_3A_SPLIT_SIZES'
EXPORTING
matnr = l_s_data_eket-matnr
j_3asize = l_s_data_eket-j_3asize
IMPORTING
j_3akord1 = l_s_data_eket-j_3abwel_color
j_3akord2 = h_feldsize1
j_3akord3 = h_feldsize2
EXCEPTIONS
no_grid_determined = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
l_s_data_eket-zz_bwel_size1 = h_feldsize1.
l_s_data_eket-zz_bwel_size2 = h_feldsize2.
ENDIF.
ENDIF."not l_s_data_eket-J_3ASIZE is initial
*E Aufsplitten MAtrix
MODIFY itab_0 FROM l_s_data_eket INDEX l_tabix.
ENDIF."not l_s_data_eket-matnr is initial
ENDLOOP. "itab_0
An Ausgabe-Tabelle übergeben
APPEND LINES OF itab_0 TO e_t_data.
IF sy-subrc <> 0.
CLOSE CURSOR s_cursor.
RAISE no_more_data.
ENDIF.
s_counter_datapakid = s_counter_datapakid + 1.
ENDIF. "Initialization mode or data extraction ?
ENDFUNCTION.
regards
thorsten -
Save-sessions-enabled not working
WLS 8.1SP4
EAR file with WAR file.
CLuster of 2 managed servers.
In-Memory Replication.
save-sessions-enabled set to true in weblogic.xml
save-sessions-enmabled doesnt seem to work. I log into the web app, do work, redeploy the webapp, and the next click in teh web app forces me to log-in again, i.e. my session is lost.
Sam Pullara had a comment in 2003 about it not working with replicated sessions until SP2. I'm on SP4.
Any ideas before I raise a case?
Many Thanks,
Graham.I have checked the support site and this is still a problem in SP3. A pach was available for SP3.
Apparently, you get the problem if you deploy the app with context-root = '/'.
I have raised a case to see if a patch is available for SP4. -
How to disable 'Hello'tried about loop:enabled -not working
I have the new version of Mozilla Firefox and it starts up with 'Hello' that allows video talking. I have tried to amend about:config, loop:enabled to disable it but this does not work, each time I start up my machine 'Hello' is back.
Any suggestions? Could the fact that my History clears daily mean the change to Hello is not being saved?hello DivaDiva, are you referring to the current hello promotion on the firefox start page? this is different from the actual feature itself which you can disable through the loop.enabled preference & will be featured on the homepage for just a few days...
-
0PM_ORDER_ATTR Delta is not working with AEDAT time stamp
Hi Experts,
I was trying to do a delta master data load for 0PM_ORDER_ATTR with AEDAT at delta filed with time stamp but its not working for me. The changed records are not comming in the delta load.
But if i do a full load with with the date selection with the same AEDAT then its working.
Is there anything wrong with the setting? Is delta supported for 0PM_ORDER_ATTR with AEDAT? M i missing anything?
Help will be appreciated.Hello,
I have the same problem.
The safety margin is set to 0. So It should work, but maybe we have to set it to 1. I will test it tomorrow.
If anybody has an idea, please let us know.
Regards,
bBe -
Hello All,
Full updates are working for the mentioned datasource 0CRM_SRV_REQ_INCI_H
But i am not able to get any delta records to the delta queue and i have checked all the possibilities
Working on CRM 7.0 EHP1 and connected to a BI 7.02 system
Delta for Master data attr like product and BP is working
I cant debug with RSA3 as it wont allow me to choose delta mode and debug(i have done the initialization successfully)
I have checked all the delta pre requisites and its driving me crazy now
I just need some pointers to actually nail this and will be thankfull for any
SuyashHi Sayush,
Did you hear back from SAP then on this delta issue.
Thanks & Regards,
Anu -
Generic Data Source delta is not extracted
Hi,
There is a problem in extracting the delta records using Generic Data Source. Delta records ( New / Modified records ) are not posted in the RSA7.
I'll Explain you the Scenario I have done. Created a generic data source in R/3 using view. In the view there is a field Sales Order No. I have enabled the delta update for this field. In the generic delta i have chosen delta type as Numeric pointer.
Extracted the entire record using full update and after initializing the Delta, it extracts the delta record well ie. it only extracts the sequence of Sale Order No. First I extracted nine records(i.e 10001 to 10009) using full update. again I entered a record in underlying table with sale order no as 10011-10013. It extracts those records into BW system. Then again I made an entry in the table with sales order no 10010. But the record is not extracted. Even though I tried of specifying safety lower limit as -3. Still it not extracting the record(10010).
And what if I posted a value of sale order 10014 with the same. what should I do?? Help on this plz.
--Durai.SHi SVS,
Thanks for your reply.
I followed this in my scenario. But I don't understand why it is not extracting? even I specified the safety limit of upper and lower values in the generic delta.
Here the below explanation shows that the delta record can be extracted even if the pointer value is greater than the posted value.
Numeric pointer (last extracted value 10011; Data in underlying table (Max value = 10025) )
Data would be extracted from a min-value of 10010 (lower limit adjusts the last counter 10011 by specified value u2013 1)
max-value of 10020 (after adjustment for upper safety limit u2013 by 5). The current pointer would now indicate 10020 in
RSA7.
--Durai.S -
Delta does not work after upgrade
Hi,
After upgrading to EHP1, dataSource 0TCT_DS02 retrieves only data for full requests but Delta cannot work anymore.
Any ideas?
Thanks
SantiHi,
Check this note and apply it. 1472057: AC:Extractor Modification: Virtual Cube call and Init loads
After it, start a new delta init after the implementation of this note.
Regards,
Fran. -
Delta is not working for custom appended fields (ZAKNA1) form R/3 to CRM
Hi, This question pertains to Customer Master (KNA1) replication from R/3 4.7 to CRM 5.0 system via middleware.
Standard fields are working fine. The custom fields also replicate fine during initial load and request loads however, delta is does not seem to be working. Any ideas or suggestions highly appreciated...Thank you.
Best regards,
---ManoharHello,
it's a long way since you post this question. I'm facing a similar problem. When i enter XD02 and change only something in the classification system, the trigger for CRM update doesn't happen. Only if i change also a master field...
I needed the force the trigger so he can update correctly when the system is only changed in the classification system.
At the time (3 years ago...:)) did you remember if you found a workaround for your problem??
Thanks,
Best regards, -
Hi all
I have a question on delta extraction. I initialised the first extraction for the DS 2lis_11_vahdr and to test the delta process created a few sales orders after that. and when i check in RSA3 in the OLTP sys. it shows the number of records as in the initialised state the newly created records are not shown in the total numbers.
i also tried a delta extraction from my BI system and it shows teh number of records extracted as 0. But if i delete the extract structure in and fill them again the number of records now is increased.
is there any setttings that i have to do either of the systems to get the delta process going?
Thanx in advance
SujaiI tried a delta extract manually and no records were updated. The extraction monitor status is green and has the following message
No new data since the last delta update
Diagnosis
The data request was a delta update, meaning, the data basis in the
source system has not changed since the last update.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
In R/3 i have the datasource displayed in RSA7 and in LBWQ i Have the following entries.
Queue Name Destination Entries
MCEX11 NONE 56,416
MCEX12 NONE 41,836
MCEX13 NONE 12,971
MCEX17 NONE 147
MCEX17_1 NONE 102
Should there be a destination described here??
Kindly help as this is getting a little urgent....
Sujai -
Fn touchpad Disable/enable not working on Msi GE70 20E
I recently got a MSI GE70 2OE 011NE with Windows 8, when i got it the Fn key wasnt working properly, some of the shortcuts worked, but to disable/enable touchpad didnt, i then downloaded the touchpad driver from this website, and then it worked.. then i updated to windows 8.1.. and after that once again it didnt work, but now it seems like the fn key doesnt work at all.. and my touchpad was disabled when i updated, wich means i cannot enable the touchpad again now.
i tried both touchpad drivers from this site, for both win 8 and win 8.1, wich didnt work.
What can i do to make the fn key work ?
update: apparantly some of the fn short cuts works.. for ie. sound, brightness and backlight keyboard brightness.. just not the enable/disable touchpad :(Try doing the EC reset procedure....
1. Turn notebook off.
2. Remove AC adapter.
3. Remove battery.
4. Let the notebook sit there for about 20 minutes.
5. Come back, insert battery.
6. Add AC adapter.
7. Power on and see if its working now.
Maybe you are looking for
-
Using OSX 10.8 DW CS6 when I click "live" it says "flash plugin" "not found".
Using DW CS6 when I click "live" it says "Flash Plugin was not found. To view Flash content in Live View install the Firefox Flash Plugin from www.adobe.com." My default browser is Chrome. DW uses Chrome as the primary browser. (FFox is secondary.) I
-
Hai Friends, Following is my requirement: My input is Plant and Date in select-options. When the plant entered for single entry i should display the text Plant : 1100 in my output. When it is entered as range both the text plant and the value should
-
I need information about sending a signal to Flexmotion board
how can I create a VI which will send a signal (like sine wave)to Flexmotion board
-
HELP : Inventory Cube - Missing routines in transformation
Hi all, Im working with BI 7.0 and i've activated Inventory Cube from Business Content. Checking the the entire data flow i saw that there were a lot of missing routines in the transformations from datasource to the cube (UM, BX and BF). My question
-
Difference between rsnast00 and rseout00
hi, Can any one say me the difference between RSNAST00 and RSEOUT00.