Generic Extraction-example
hello EXPERTS
I am trying to give one presentation about 'Generic Extraction using View'...I know how to explain the process.But as I donot have project experience,I have never worked with Generic Extraction.
Can any one give an example where they used generic extraction(by view) on SAP standard tables.Its enough if you can mention the fields you used and from which tables you took these fields?
Thanks
S
Hi,
Processing steps for creating the Generic Datasource by useing View:
1.Goto RSo2.
Datasource can be created for
a). Transaction Data
b). Master data Attributes
c). Master data Text
2.Specify Application component(SD/MM..)
3.There are three extraction methods to fill datasource.
i).Transparent table or Database view
ii).InfoSets of the SAP query
iii).Using a Function Module
4.Select extraction method extracts the data from a transparent table or database view.
5.select Extraction from View, then we have to create the View.
a).specify the view name.
b).choose the view type (Database view) from bellow mentioned views.
Database view.
projection view.
maintainance view.
help view.
6. Specify Tables and Join Conditions and define view fields.
7. Assign View to Datasource
8. Once you specify view in Data source, the extract structure willgenerate.
9. then select the filds in selection column.
10. Specify Delta-Specific Field and type.
11. Specify Safety Interval and Delta Type and select Save button.
12. Testing the Generic extraction.
Select Datasource option from menu bar-->select Test Extraction or you can check in RSA3.
Regards,
Suman.
Similar Messages
-
Generic extraction example required
hi guys,
can anybody plz give a real time scenario for Generic extraction, give it in detail, i have to explian the same in interview?
points will be given
thanks and regards..Hi,
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
(navigate with expand left nodes)
also co-pa
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
LO Extraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Check these links:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Re: LO-Cockpit V1 and V2 update
Also Refer this link:
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
FI-CO 'Data Extraction -Line Item Level-FI-CO
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
FI-GL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapgenie.com/sapfunc/fi.htm
FI-SL
http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
Please reward for the same. -
Generic Extraction (or) How to use table in R/3 system as datasource in BW?
Hi all,
Hope all are having a great day
Can any1 tell me the steps, for Generic Extraction.
It will be very helpful, if the steps are as much as simpler as posible.
I know to create a simple cube in BW.
I have this much knowledge, depending on this can any1 tell me the steps for Generic Extraction from R/3.
examples wud be vry useful
Regards,
Souravhi,
Maintaining Generic DataSources
Use
Independently of application, you can create and maintain generic DataSources for transaction data, master data attributes or texts from any kinds of transparent tables, database views, InfoSets of the SAP query or using a function module. As a result, you can make use of the generic extraction of data.
Procedure
Creating a Generic DataSource(RSO2)
1. Select the DataSource type and give it a technical name.
2. Choose Create.
The creating a generic DataSource screen appears.
3. Choose an application component to which the DataSource is to be assigned.
4. Enter the descriptive texts. You can choose any text.
5. Choose from which datasets the generic DataSource is to be filled.
a. Choose Extraction from View, if you want to extract data from a transparent table or a database view. Enter the name of the table or the database view.
After generation, you get a DataSource whose extract structure is congruent with the database view or the transparent table view.
For more information about creating and maintaining database views and tables, see the ABAP Dictionary Documentation.
b. Choose Extraction from Query, if you want to use a SAP query InfoSet as the data source. Select the required InfoSet from the InfoSet catalog.
Notes on Extraction Using SAP Query
After generation, you now have a DataSource whose extract structure matches the InfoSet.
For more information about maintaining the InfoSet, see the System Administration documentation.
c. Choose Extraction using FM, if you want to extract data using a function module. Enter the function module and extract structure.
The data must be transferred by the function module in an interface table E_T_DATA.
Interface Description and Extraction Process Flow
For information about the function library, see the ABAP Workbench: Tools documentation.
d. With texts, you also have the option of extraction from domain fixed values.
6. Maintain the settings for delta transfer where appropriate.
7. Choose Save.
When extracting, look at SAP Query: Assigning to a User Group.
Note when extracting from a transparent table or view:
If the extract structure contains a key figure field, that references to a unit of measure or currency unit field, this unit field must appear in the same extract structure as the key figure field.
A screen appears in which you can edit the fields of the extract structure.
8. Editing the DataSource:
 Selection
When scheduling a data request in the BW Scheduler, you can enter the selection criteria for the data transfer. For example, you may want to determine that data requests are only to apply to data from the previous month.
If you set the Selection indicator for a field within the extract structure, the data for this field is transferred in correspondence with the selection criteria in the scheduler.
 Hide field
You should set this indicator to exclude an extract structure field from the data transfer. As a result of your action, the field is no longer made available in BW when setting the transfer rules and generating the transfer structure.
 Inversion
Reverse postings are possible for customer-defined key figures. For this reason, inversion is only possible for certain transaction data DataSources. These include DataSources that have a field that is indicated as an inversion field, for example, the field update mode in the DataSource 0FI_AP_3. If this field has a value, then the data records are interpreted as reverse records in BW.
Set the Inversion indicator if you want to carry out a reverse posting for a customer-defined field (key figure). The value of the key figure is then transferred in inverted form (multiplied by 1) into BW.
 Field only known in exit
You can enhance data by extending the extract structure for a DataSource using fields in append structures.
The indicator Field only known in Exit is set for fields of an append structure. In other words, by default these fields are not passed onto the extractor from the field list and selection table.
Deselect the indicator Field Only Known in Exit to enable the Service API to pass on the append structure field to the extractor together with the fields of the delivered extract structures in the field list as well as in the selection table.
9. Choose DataSource ® Generate.
The DataSource is now saved in the source system.
Maintaining Generic DataSources
Change the DataSource
To change a generic DataSource, in the initial screen of DataSource maintenance, enter the name of the DataSource and choose Change.
You can change the assignment of a DataSource to an application component as well as the texts of a DataSource. Double-clicking on the name of the table, view, InfoSet or extract structure takes you to the appropriate maintenance screen. Here you can make changes required to add new fields. You can fully swap transparent tables and database views, but not InfoSets. If you return to the DataSource maintenance and choose Create, the screen for editing a DataSource appears. To save the DataSource in the SAP source system, choose DataSource ® Generate.
If you want to test extraction in the source system independently of a BW system, choose DataSource ® Test Extraction.
Delta DataSource
In the Change Generic DataSource screen, you can delete any DataSources that are no longer relevant. If you are extracting data from an InfoSet, delete the associated query. If you want to delete a DataSource, this must not be connected to a BW system.
For more information about extracting using SAP Query, see Extraction using the SAP Query.
hope this helps.
assign point if so
partha -
When we go for Views and Function Modules for Generic Extraction
Hi Experts,
Can you please explain when we go for extracting the data using Views and when we got using Function Modules using Generic Extraction from R/3 system to BW with examples. And also can you explain when we go for delta for the above both scenarios.
Thanks for you help in advance
RohithHi,
Scenario for Extarction using FM
Imagine the scenario where you need to extract data from
tables having no common field between them and thereby preventing you from creating a view on top of those tables..
Or simply consider tables that are highly unrelatd in terms of fields, but you have a requiremnt to extract data from them.
Also Refer.
create generic extractor based on 2 tables
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Steps.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
http://help.sap.com/saphelp_nw04/helpdata/en/86/1c8c3e94243446e10000000a114084/frameset.htm
Scenario for Extraction using View
If there are more number of tables and data in those tables can be represented using joins then we can use this type of extraction
For more info Refer these links
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
For GEneric Delta refer these links
[generic with delta;
[https://forums.sdn.sap.com/click.jspa?searchID=11388803&messageID=5164737] -
Hi Gurus
Can we use BC in generic extraction ? How?KR
In this case we called as enhancement of the standard datasource. In your example you need 17 fields and you found one standard datasource which is taking care of your fourteen fields. For other three fields you will do the enhancement i.e you will add these three custom fields in the append structure of standard datasource and you will populate these three fields user exit.
Please see this attachment on How to Enhance standard Data source.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
Re: Enhancement
Hope this helps
Thnaks
Sat -
Generic extraction (table,view,functionmodule)
hi
In generic Extaction when we use table and view and function module and sap qu (scenario)
AND
plz send some examples
Please search the forums before postingHi,
when Standard Extractors are not supporting to your requirement then we go with Generic Extraction.
Here we have Three different types to design generic extractors
Table
View
Function Module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
https://websmp103.sap-ag.de/~sapidb/011000358700007535452002
Hope this will help you.
Thanks
Prasad -
Hi Gurus,
Can any one explain me about generic extraction like,
1) when we go for Generic extraction
2) what is the business scenario
3) generic delta
Please explain me with step by step by choosing some data fields as example for this. One request, plz don't send sap help file as i have it. If any one have screen shots for this plz send me.
Thanks in advance.
Regards
K.M.Reddyhi,
we go for generic extraxctor when standard cube or datasource do not suite the
requirement.
for eg in satandard sd datasource donot have the field we require then we
go for generic datasource.
if standard datasource do not have shipping point field in datasource then we
can either append the structure or go for generic datasource.
for generic delta refer link.
http://help.sap.com/saphelp_nw04s/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/frameset.htm
regards
pls assign points if helpful. -
Hi All,
Could someone please send me some information regarding LIS extraction and Generic extraction.
Thanks in advance,
SekharHi Sekhar,
Please do check the link for step by step for generic xtraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
(navigate with expand left nodes)
also co-pa
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
LO Extraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Check these links:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Re: LO-Cockpit V1 and V2 update
Also Refer this link:
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
FI-CO 'Data Extraction -Line Item Level-FI-CO
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
FI-GL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapgenie.com/sapfunc/fi.htm
FI-SL
http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
How to do basic LO extraction for SAP-R3-BW
1. Go to transaction code RSA3 and see if any data is available related to your DataSource. If data is there in RSA3 then go to transaction code LBWG (Delete Setup data) and delete the data by entering the application name.
2. Go to transaction SBIW --> Settings for Application Specific Datasource --> Logistics --> Managing extract structures --> Initialization --> Filling the Setup table --> Application specific setup of statistical data --> perform setup (relevant application)
3. In OLI*** (for example OLI7BW for Statistical setup for old documents : Orders) give the name of the run and execute. Now all the available records from R/3 will be loaded to setup tables.
4. Go to transaction RSA3 and check the data.
5. Go to transaction LBWE and make sure the update mode for the corresponding DataSource is serialized V3 update.
6. Go to BW system and create infopackage and under the update tab select the initialize delta process. And schedule the package. Now all the data available in the setup tables are now loaded into the data target.
7.Now for the delta records go to LBWE in R/3 and change the update mode for the corresponding DataSource to Direct/Queue delta. By doing this record will bypass SM13 and directly go to RSA7. Go to transaction code RSA7 there you can see green light # Once the new records are added immediately you can see the record in RSA7.
8.Go to BW system and create a new infopackage for delta loads. Double click on new infopackage. Under update tab you can see the delta update radio button.
9.Now you can go to your data target and see the delta record.
find your scenario and find what data sources do you need on R3 side and ensure they are active as well:
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
find your scenario -> data sources -> go to R3 -> sbiw and activate required data source
replicate data sources in BW:
RSA1 -> source systems -> right click on your source system -> replicate
then activate your BC:
service.sap.com/bi -> BI Business Content -> General Information -> SAP BW Business Content - Activation
and execute infopackage (it should be delivered with BC)
Useful links:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
service.sap.com/bi -> BI InfoIndex
sdn.sap.com -> Business Information Warehouse -> How-To guides (under Quick Links)
Hope This Helps.
****Assign Points If Helpful****
Regards,
Ravikanth -
Where to find deltas in generic extraction
hi experts,
could you please explain me tcodes which are used to find the delta data while we go for generic extraction. Also can anyone explain me the full process of extracting the data using
infoset query and function module.
Cheers,
Pragya.Hi
You can define delta's in generic using " calendr day, numeric pointer, time stamp."
Generic Delta
If a field exists in the extract structure of a DataSource that contains values which increase monotonously over time, you can define delta capability for this DataSource. If such a delta-relevant field exists in the extract structure, such as a timestamp, the system determines the data volume transferred in the delta method by comparing the maximum value transferred with the last load with the amount of data that has since entered the system. Only the data that has newly arrived is transferred.
To get the delta, generic delta management translates the update mode into a selection criterion. The selection of the request is enhanced with an interval for the delta-relevant field. The lower limit of the interval is known from the previous extraction. The upper limit is taken from the current value, such as the timestamp or the time of extraction. You can use security intervals to ensure that all data is taken into consideration in the extractions. After the data request was transferred to the extractor, and the data was extracted, the extractor then informs generic delta management that the pointer can be set to the upper limit of the previously returned interval.
The delta for generic DataSources cannot be used with a BW system release prior to 3.0. In older SAP BW releases, the system does not replicate DataSources for master data and texts that were made delta-enabled using the delta for generic DataSources.
Determining the Generic Delta for a DataSource
1. Choose Generic Delta.
2. In the subsequent dialog box, specify the delta-determining field and the type for this field.
3. Maintain the settings for the generic delta:
a. Specify a security interval.
The purpose of a security interval is to make the system take into consideration records that appear during the extraction process but which remain unextracted (since they have yet to be saved) during the next extraction.
You have the option of adding a security interval to the upper limit/lower limit of the interval.
A security interval should only be specified for the lower limit when the delta method results in a new status for changed records, in other words, when the status is overwritten in BW. In this case, duplicate data records that could arise in such a safety interval have no affect on BW.
b. Choose the delta type for the data to be extracted.
The delta type is used to determine how extracted data is interpreted in BW and which data targets in which it can be posted.
With the delta type additive delta, the record to be loaded for summarizable key figures only returns the change to the key figure. The extracted data is added in BW. DataSources with this delta type can supply both ODS objects and InfoCubes with data.
With the delta type New Status for Changed Records, every record to be loaded returns the new status for all key figures and characteristics. The values are overwritten in BW. DataSources with this delta type can write the data into ODS objects and master data tables.
4. Save your entries.
Delta transfer is now possible for this DataSource.
After generating the DataSource, you can see this from the marking for the field Delta Update on the DataSource: Customer Version screen.
In systems from release 4.0B, you can display the current value of the delta-relevant field in the delta queue.
Example for Determining the Selection Interval for a Generic Delta
Safety Interval Upper Limit
The delta-relevant field is a timestamp.
The timestamp that was read last is 12:00:00. Delta extraction begins at 12:30:00. The safety interval for the upper limit is 120 seconds. The safety interval for the delta request is: 12:00:00 to 12:28:00. Upon completion of the extraction, the pointer is set to 12:28:00.
Safety Interval Lower Limit
The delta-relevant field is a timestamp. After images are transferred. In other words, the record is overwritten with the status after the change in BW, for example for master data. Any duplicate records that appear have no effect upon the BW system.
The last changed timestamp is 12:28:00. Delta extraction begins at 13:00. The safety interval for the lower limit is 180secs. The safety interval for the delta request is: 12:25:00 to 13:00:00. Upon completion of the extraction, the pointer is set to 13:00:00.
source: help.sap.com
Hope it helps
kalyan -
Deltas for generic extraction.
Hi,
if i want use time stamp & calday for my generic extraction , i can use uppercase and lower case, wher can i give timings suppose want run deltas for 10am-10.30am.
regards
anithaHi,
Security interval upper limit The delta-relevant field is a timestamp.
The timestamp that was read last is 12:00:00. Delta extraction begins at 12:30:00. The security interval for the upper limit is 120 seconds. The selection interval for the delta request is: 12:00:00 to 12:28:00. When the extraction is finished, the pointer is set to 12:28:00. Security interval lower limit The delta-relevant field is a timestamp. After images are transferred. In BI the record is overwritten with the post-change status, for example, for master data. Any duplicate data records do not affect BI. The last read timestamp is 12:28:00. Delta extraction begins at 13:00. The security interval for the lower limit is 180 seconds. The selection interval for the delta request is: 12:25:00 to 13:00:00. When the extraction is finished, the pointer is set to 13:00:00. -
Reagrding Generic Extraction Delta
hai
Can anyone explain in detail with example or reak time scenarios about "Generic delta extraction for '0calday'" , "Generic Delta extraction for Numaric Pointer" , "Generic Delta extraction for timestamp" individually ..
Please also send some documents or forums or weblog or screen shots to [email protected] now
Thanks
Bye
mohammedDear shylaja,
can you please send the documents related to generic extraction to [email protected] &/ to [email protected] ?
hope you will help.
Waiting for your reply.
Regards
Vinay -
HI could you pls explaing generic extraction delta mechanism
I know what is delta . but i couldnt differentiate when we go for time stamp and numeric pointer
i have the document for how to generic delta but inthat it is mentioned about how to use . but i want to know when shoudl i use time stamp and numeric pointer
all answers would be rewardeHi Dolly,
Here the changed records can be isentified by :
1. Based on the date of creation or last change ( Delta based on 0Calday)
2. Based on the record number ( Numeric Pointer )
3. Based on time of change ( Timestamp)
real time examples would be
1. Master Record creation like customer ID creation
2. Timesheets in SAP PS
3. Invoive details / Sales Order Details.
Here is a weblog from Siggi for Generic Delta Extraction with Function Module.
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Check previous posts as well.
Generic delta
Data Warehousing
regards
@jay -
Generic Extraction business Requirement, through function module,
Generic Extraction business Requirement, specifically through function module and source code in function module.
Dear Karthik,
Go to transaction SBIW -> Generic Datasource -> Maintain Generic Datasources -> Choose Master/Transaction Data -> Maintain proper entries (Application Component, Descriptions) -> Extraction by FM if you want to extract using FM.
Maintaining Generic DataSources - Independently of application, you can create and maintain generic DataSources for transaction data, master data attributes or texts from any kinds of transparent tables, database views, InfoSets of the SAP query or using a function module. As a result, you can make use of the generic extraction of data.
Creating a Generic DataSource
1. Select the DataSource type and give it a technical name.
2. Choose Create. The creating a generic DataSource screen appears.
3. Choose an application component to which the DataSource is to be assigned.
4. Enter the descriptive texts. You can choose any text.
5. Choose from which datasets the generic DataSource is to be filled.
a. Choose Extraction from View, if you want to extract data from a transparent table or a database view. Enter the name of the table or the database view.
After generation, you get a DataSource whose extract structure is congruent with the database view or the transparent table view.
For more information about creating and maintaining database views and tables, see the ABAP Dictionary Documentation.
b. Choose Extraction from Query, if you want to use a SAP query InfoSet as the data source. Select the required InfoSet from the InfoSet catalog.
After generation, you now have a DataSource whose extract structure matches the InfoSet.
For more information about maintaining the InfoSet, see the System Administration documentation.
c. Choose Extraction using FM, if you want to extract data using a function module. Enter the function module and extract structure.
The data must be transferred by the function module in an interface table E_T_DATA.
For information about the function library, see the ABAP Workbench: Tools documentation.
d. With texts, you also have the option of extraction from domain fixed values.
Maintain the settings for delta transfer where appropriate.
7. Choose Save.
Note when extracting from a transparent table or view:
If the extract structure contains a key figure field, that references to a unit of measure or currency unit field, this unit field must appear in the same extract structure as the key figure field.
A screen appears in which you can edit the fields of the extract structure.
8. Editing the DataSource:
Selection
When scheduling a data request in the BW Scheduler, you can enter the selection criteria for the data transfer. For example, you may want to determine that data requests are only to apply to data from the previous month.
If you set the Selection indicator for a field within the extract structure, the data for this field is transferred in correspondence with the selection criteria in the scheduler.
Hide field
You should set this indicator to exclude an extract structure field from the data transfer. As a result of your action, the field is no longer made available in BW when setting the transfer rules and generating the transfer structure.
Inversion
Reverse postings are possible for customer-defined key figures. For this reason, inversion is only possible for certain transaction data DataSources. These include DataSources that have a field that is indicated as an inversion field, for example, the field update mode in the DataSource 0FI_AP_3. If this field has a value, then the data records are interpreted as reverse records in BW.
Set the Inversion indicator if you want to carry out a reverse posting for a customer-defined field (key figure). The value of the key figure is then transferred in inverted form (multiplied by 1) into BW.
Field only known in exit
You can enhance data by extending the extract structure for a DataSource using fields in append structures.
The indicator Field only known in Exit is set for fields of an append structure. In other words, by default these fields are not passed onto the extractor from the field list and selection table.
Deselect the indicator Field Only Known in Exit to enable the Service API to pass on the append structure field to the extractor together with the fields of the delivered extract structures in the field list as well as in the selection table.
9. Choose DataSource -> Generate.
The DataSource is now saved in the source system.
Maintaining Generic DataSources
· Change the DataSource
To change a generic DataSource, in the initial screen of DataSource maintenance, enter the name of the DataSource and choose Change.
You can change the assignment of a DataSource to an application component as well as the texts of a DataSource. Double-clicking on the name of the table, view, InfoSet or extract structure takes you to the appropriate maintenance screen. Here you can make changes required to add new fields. You can fully swap transparent tables and database views, but not InfoSets. If you return to the DataSource maintenance and choose Create, the screen for editing a DataSource appears. To save the DataSource in the SAP source system, choose DataSource -> Generate.
If you want to test extraction in the source system independently of a BW system, choose DataSource -> Test Extraction.
· Delta DataSource
In the Change Generic DataSource screen, you can delete any DataSources that are no longer relevant. If you are extracting data from an InfoSet, delete the associated query. If you want to delete a DataSource, this must not be connected to a BW system.
Also visit :[Data Extraction from SAP Source System | http://help.sap.com/saphelp_nw04/helpdata/en/28/4c553c42360a40e10000000a114084/content.htm]
Regards,
Naveen. -
Hi all,
I would like to have some links r docs to mail about DB view extraction. I am stuck in it. I would like to know it from how to create a view and till how do i recognize a delta field in the given 2 tables.
my mail ID is [email protected]
Thanks and regards.hi pradeep,
Maintaining Generic DataSources
Use
Independently of application, you can create and maintain generic DataSources for transaction data, master data attributes or texts from any kinds of transparent tables, database views, InfoSets of the SAP query or using a function module. As a result, you can make use of the generic extraction of data.
Procedure
Creating a Generic DataSource
1. Select the DataSource type and give it a technical name.
2. Choose Create.
The creating a generic DataSource screen appears.
3. Choose an application component to which the DataSource is to be assigned.
4. Enter the descriptive texts. You can choose any text.
5. Choose from which datasets the generic DataSource is to be filled.
a. Choose Extraction from View, if you want to extract data from a transparent table or a database view. Enter the name of the table or the database view.
After generation, you get a DataSource whose extract structure is congruent with the database view or the transparent table view.
For more information about creating and maintaining database views and tables, see the ABAP Dictionary Documentation.
b. Choose Extraction from Query, if you want to use a SAP query InfoSet as the data source. Select the required InfoSet from the InfoSet catalog.
Notes on Extraction Using SAP Query
After generation, you now have a DataSource whose extract structure matches the InfoSet.
For more information about maintaining the InfoSet, see the System Administration documentation.
c. Choose Extraction using FM, if you want to extract data using a function module. Enter the function module and extract structure.
The data must be transferred by the function module in an interface table E_T_DATA.
Interface Description and Extraction Process Flow
For information about the function library, see the ABAP Workbench: Tools documentation.
d. With texts, you also have the option of extraction from domain fixed values.
6. Maintain the settings for delta transfer where appropriate.
7. Choose Save.
When extracting, look at SAP Query: Assigning to a User Group.
Note when extracting from a transparent table or view:
If the extract structure contains a key figure field, that references to a unit of measure or currency unit field, this unit field must appear in the same extract structure as the key figure field.
A screen appears in which you can edit the fields of the extract structure.
8. Editing the DataSource:
 Selection
When scheduling a data request in the BW Scheduler, you can enter the selection criteria for the data transfer. For example, you may want to determine that data requests are only to apply to data from the previous month.
If you set the Selection indicator for a field within the extract structure, the data for this field is transferred in correspondence with the selection criteria in the scheduler.
 Hide field
You should set this indicator to exclude an extract structure field from the data transfer. As a result of your action, the field is no longer made available in BW when setting the transfer rules and generating the transfer structure.
 Inversion
Reverse postings are possible for customer-defined key figures. For this reason, inversion is only possible for certain transaction data DataSources. These include DataSources that have a field that is indicated as an inversion field, for example, the field update mode in the DataSource 0FI_AP_3. If this field has a value, then the data records are interpreted as reverse records in BW.
Set the Inversion indicator if you want to carry out a reverse posting for a customer-defined field (key figure). The value of the key figure is then transferred in inverted form (multiplied by 1) into BW.
 Field only known in exit
You can enhance data by extending the extract structure for a DataSource using fields in append structures.
The indicator Field only known in Exit is set for fields of an append structure. In other words, by default these fields are not passed onto the extractor from the field list and selection table.
Deselect the indicator Field Only Known in Exit to enable the Service API to pass on the append structure field to the extractor together with the fields of the delivered extract structures in the field list as well as in the selection table.
9. Choose DataSource ® Generate.
The DataSource is now saved in the source system.
Maintaining Generic DataSources
Change the DataSource
To change a generic DataSource, in the initial screen of DataSource maintenance, enter the name of the DataSource and choose Change.
You can change the assignment of a DataSource to an application component as well as the texts of a DataSource. Double-clicking on the name of the table, view, InfoSet or extract structure takes you to the appropriate maintenance screen. Here you can make changes required to add new fields. You can fully swap transparent tables and database views, but not InfoSets. If you return to the DataSource maintenance and choose Create, the screen for editing a DataSource appears. To save the DataSource in the SAP source system, choose DataSource ® Generate.
If you want to test extraction in the source system independently of a BW system, choose DataSource ® Test Extraction.
Delta DataSource
In the Change Generic DataSource screen, you can delete any DataSources that are no longer relevant. If you are extracting data from an InfoSet, delete the associated query. If you want to delete a DataSource, this must not be connected to a BW system.
For more information about extracting using SAP Query, see Extraction using the SAP Query.
if helpfull assign points
regards,
yunus -
Hi,
What scenarios you use RDA when you are extracting data from Generic Extraction among table, view, FM, or SAP Query. Could you please explain with your experiences with examples.
Regards,I got your question .
There are datasources delivered by SAP and those cab be used by for doing the RDA .
The way to check which datasource are RDA enabled .
1. Go to Se11 . Tabele name - ROOSOURCE
2. Give the name of the datasource and see the value in REALTIME . if it supports the box you fill find
filled in the table entries /
You use real-time data acquisition if you want to transfer data to BI at frequent
intervals (every hour or minute) and access this data in reporting frequently or
regularly (several times a day, at least). The DataSource has to support real-time
data acquisition. The option to support real-time data acquisition is a property of
a DataSource.
DataSources that are released for real-time data acquisition cannot be
used for standard data transfer (scheduled staging).
Rest i am not sure we can create a generic data source and make that RDA enabled .
Assign marks is the best way to appreciate help
Maybe you are looking for
-
UCM Server libraries and application failed during startup
When i am going to start UCM_Server managed server (a instance of UCM) from Administrative Console, server started but application startup failed. Similarly, when i start this server using startManagedWebLogic startup script, server as well as applic
-
Iphoto library acces in iMovie
Hello, I have a problem with iphoto browser in iMovie or Mail. I have several iPhoto library. For example, if I open iphoto Libray 2012 in iphoto, I can see in imovie browser correct photo, movie. But if I open iphoto library 2015 un iPhoto, I see in
-
When trying to update my iPad to version iOS 7.0.04 I keep getting 'Unable to Verify Update' message 'Because I am not connected to the Internet'. I am connected. I have reset iPad, reset Internet connections but to no avail?
-
Having trouble creating noise source with PWL Source
Hello, I am using a text file (attached) that has random values on the voltage collum, so I expected to obtain a noise source when I imported this file to my PWL source. Yet, all I see is a sawtooth kind of pattern. Could anyone help me create the no
-
ITunes not recognizing itouch error code 0eX800000A
Up until recently there was no problem with connection but now when I try to connect my iTouch 2nd gen iTunes does not recognize it and a window comes up saying "iTunes could not connect to this iPod because an unknown error occured (0xE800000A)" I