Reg Generic Extraction

Hi Gurus,
Can any one explain me about generic extraction like,
1) when we go for Generic extraction
2) what is the business scenario
3) generic delta
Please explain me with step by step by choosing some data fields as example for this. One request, plz don't send sap help file as i have it. If any one have screen shots for this plz send me.
Thanks in advance.
Regards
K.M.Reddy

hi,
we go for generic extraxctor when standard cube or datasource do not suite the
requirement.
for eg in satandard sd datasource donot have the field we require then we
go for generic datasource.
if standard datasource do not have shipping point field in datasource then we
can either append the structure or go for generic datasource.
for generic delta refer link.
http://help.sap.com/saphelp_nw04s/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/frameset.htm
regards
pls assign points if helpful.

Similar Messages

Delta for Generic Extraction

Hi all,
Can anyone tell about delta for generic extraction i.e 3 options in detail and when do we use it.
thanks in advance,
chandra sekhar

When you want to customize existing datasources at R/3 sides then you can do that with customer exits.
Suppose if you want to add a column to the existing datasource then you will use append structures (Transaction SBIW-> Edit Data sources - Enhance Datasource) then to fill the column you will write the code in these Exits.
There are 4 types of Exits available.Function Group (XRSA)
EXIT_SAPLRSAP_001 Customer Function Call for Supplying Transaction Data
EXIT_SAPLRSAP_002 Customer Function Call for Supplying Master Data (Attributes)
EXIT_SAPLRSAP_003 Customer Function Call for Supplying Text
EXIT_SAPLRSAP_004 Customer Function Call for Supplying Hierarchies
As you are aware there 4 types since the datasources in R/3 are predefined to fill the data of BW viz, attributes,Text,Hierarchy and Transaction.
Check the below forum discussion for more information..
DataSource Enhancement
Regs
Gopi
Assign point if it helps ...

Generic Extraction creation

HI All,
I want to extract data from two tables from CRM(Z tables).
When I goto RSO2 to create a generic data source it is giving me the options of Extract from View,Extract from Info Set and Extract BY FM.
But when I select Extraction from View it is giving me an option to select from one table only.
HOw can I extract data from two tables?
Please help me
Sridath

Hi,
Check the below links, you will get more info on Generic Extraction.
Generic Extraction:
http://help.sap.com/saphelp_nw70/helpdata/en/28/4c553c42360a40e10000000a114084/frameset.htm
Check the link.
http://www.erpgenie.com/sapgenie/docs/MySAP%20BW%20Cookbook%20Vol%202.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Refer:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Generic Extraction with Table, View, FM & Infoset
Creating a datasource for generic extraction
Generic Extraction
Customer and Generic extraction difference ?
generic extraction
Re: Generic extractors
generic extraction
Reg
Pra

Generic extraction

Hi,
in generic extraction in which scenarios you extract data from table,view,infoset query,FM
sridhar

Transparent Table
If you're wishing to create a generic DataSource based on a single Transparent Table in the source R3/ECC system, then using that table as the source for your generic DataSource would be appropriate because it will expose all of the columns in that table to your generic extraction structure. There is one exception to this and that is, if you have more than one date field (e.g. Created On and Changed On dates) that you're going to use for generic delta. Pool/Cluster tables and structures wouldn't be allowable for this type of generic DataSource setup.
View on Transparent Tables
If your requirement is to create a generic DataSource based on multiple Transparent Tables in your source R3/ECC system, then a view would be appropriate. You can either use SAP delivered views in the source R3/ECC environment or create a custom view. The same exceptions (generic delta on more than one date field, pool/cluster tables and structures).
Function Module
A custom Function Module can be coded for the extraction of data for a generic DataSource. This type would be appropiate if you're extracting data from pool/cluster tables or structures. Another use for a Function Module as the source for a generic DataSource would be if you're going to use more than one data field for a generic delta. Finally, a Function Module would be used if there is some transformational-type logic required to be done on the extracted data before it is passed to BW.
InfoSet Query
An InfoSet (not to be confused with an InfoSet in BW) query in a source R3/ECC environment, is created in tocde SQ01, and is a way of creating "quick-and-dirty" reports with summarized values, derived values, et. al. This can be used as the basis for a DataSource, if the queries are already built. If not, then a Function Module can perform and necessary aggregations, derivations or other transformational-type logic, instead of creating a query. I say this because I'd highly discourage using this as a source for a generic DataSource because InfoSet queries are usually extremely inefficient and can consume a lot of the valuable system resources.

Urgent: Problems in Generic Extraction by Function Module

Hi BW Gurus,
I am new to SDN and also new to generic extraction using function module. My requirement is to extract long text(142 char) from CRM to BW as the text is not stored in database table I used function module read_text with in another ZXXX function module copy of (RSAX_BIW_GET_DATA_SIMPLE). In my extract structure I used GUID(char,32), Langu, long text(142 char) and 2 placeholders. Text can be extracted by passing STXH table fields(Tdname, Tdid, Tdobject, Tdspars) to read_text as parameters and i also need to use CRMD_ORDERADM_H field GUID(32 char) to compare 1st 32 chars of tdname(70 char) with Guid to select Guids and loop thru this Guids and for each Guid i need to append lines of text to e_t_data but as i donot know ABAP i unable to write the code for this. Through my friends help i wrote code when i check in RSA3 it is displaying the text but when i replicate into BW and load into data target in monitor the status is red with records initially but afterwards it will be red status again with 0 from 0 records for initial load again.when i check on job logs the errors i have are:
The background job has created a job log file of 2Gb size and it is currently on a infinite loop writing entries into the SAP System Log that it cannot write to the Job log file due to Error 22 for write/read access to a file this is because of the datasource i have created. Please find my Function module and if anyone would please correct FM and send me that will be really great.I appreciate it in advance.
MY Function Module is:
FUNCTION Z_CRMORDERH_STR_TXT.
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE YCRM_TEXT_STR OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
***" EXCEPTIONS     NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
Tables: CRMD_ORDERADM_H, STXH.
Auxiliary Selection criteria structure
data: l_s_select type srsc_s_select.
Maximum number of lines for DB table
Statics: s_s_if type srsc_s_if_simple,
counter
         s_counter_datapakid like sy-tabix,
Cursor
         s_cursor type cursor.
data: i_crmtext type standard table of TLINE .
types: begin of xsreph ,
          GUID type CRMD_ORDERADM_H-guid,
        end of xsreph.
   data: i_guid type standard table of xsreph.
data: I_TEXT type STXH-TDNAME.
data: xempl like YCRM_TEXT_STR occurs 0 with header line.
data: t_tab like dd03l-tabname.
Select ranges
ranges: l_r_guid for CRMD_ORDERADM_H-guid.
         l_r_connid for sflight-connid.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
if i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    case i_dsource.
      when 'yCRM_TEXT'. " for S_SREPH1
      when others.
        if 1 = 2. message e009(r3). endif.
this is a typical log call. Please write every error message like this
        log_write 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                i_dsource   "message variable 1
                  ' '.                 "message variable 2
        raise error_passed_to_mess_handler.
    endcase.
   append lines of i_t_select to s_s_if-t_select.
Fill parameter buffer for data extraction calls
    s_s_if-requnr    = i_requnr.
    s_s_if-dsource = i_dsource.
    s_s_if-maxsize   = i_maxsize.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
   append lines of i_t_fields to s_s_if-t_fields.
we will do our selection based on what is in the p table for the
infoobject
else.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    if s_counter_datapakid = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
    LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GUID'.
        MOVE-CORRESPONDING L_S_SELECT TO L_R_GUID.
        APPEND L_R_GUID.
      ENDLOOP.
      case i_dsource.
        when 'YCRM_TEXT'. " for S_SREPH1
          t_tab = 'CRMD_ORDERADM_H'.
      endcase.
      select GUID
      from (t_tab)
      into table i_guid where   PROCESS_TYPE = 'ZACI' and ( OBJECT_ID < '0000000042').
     select tdname from stxh into i_text where tdobject = 'TEXT'.
     if sy-subrc ne 0.
       message e009(r3).
this is a typical log call. Please write every error message like this
       log_write 'E'                  "message type
                 'R3'                 "message class
                 '009'                "message number
                 i_dsource   "message variable 1
                 'No master data found'.           "message variable 2
       raise error_passed_to_mess_handler.
     endif.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
     open cursor with hold s_cursor for
     select (s_s_if-t_fields) from CRMD_ORDERADM_H
                              where GUID in L_R_GUID .
                               ENDIF.
Fetch records into interface table.
named E_T_'Name of extract structure'.
   fetch next cursor s_cursor
              appending corresponding fields
              of table e_t_data
              package size s_s_if-maxsize.
    IF SY-SUBRC <> 0.
     CLOSE CURSOR S_CURSOR.
     RAISE NO_MORE_DATA.
   ENDIF.
as we are doing this only once can use the select statement.
***data: crmtext like tline occurs 0 with header line.
**data: i_crmtext type standard table of TLINE.
**data: i_guid type standard table of xsreph.
data: l_guid type THEAD-TDNAME.
data: st_guid type xsreph.
data: st_crmtext type TLINE.
data: lan type THEAD-TDSPRAS.
lan = 'E'.
loop at i_guid into st_guid.
l_guid = st_guid-guid.
CALL FUNCTION 'READ_TEXT'
   EXPORTING
   CLIENT                        = SY-MANDT
     ID                            = 'A002'
     LANGUAGE                      = lan
     NAME                          = l_guid
     OBJECT                        = 'CRM_ORDERH'
   ARCHIVE_HANDLE                = 0
   LOCAL_CAT                     = ' '
IMPORTING
   HEADER                        =
   TABLES
     LINES                         = i_crmtext.
EXCEPTIONS
   ID                            = 1
   LANGUAGE                      = 2
   NAME                          = 3
   NOT_FOUND                     = 4
   OBJECT                        = 5
   REFERENCE_CHECK               = 6
   WRONG_ACCESS_TO_ARCHIVE       = 7
   OTHERS                        = 8
e_t_data-guid = l_guid.
loop at i_crmtext into st_crmtext.
move lan to e_t_data-langu.
move st_crmtext-tdline to e_t_data-description.
append e_t_data.
endif.
endloop.
clear: st_guid,l_guid.
refresh: i_crmtext.
endloop.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
endif.
ENDFUNCTION.
please Gurus as I donot know ABAP i appreciate if anyone would write a FM based on requirement and send me that will be really great this is my request. I gurantee of award points for good answers.
Regards
Kishore

Hi,
The statement <b>RAISE NO_MORE_DATA</b> should be active (uncommented) in your code. Otherwise, the infinte loop occurs.
See also, the Siggi's blog:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
BTW, was it your thread here:
Re: Urgent: problems in extracting Long Text
Best regards,
Eugene

Generic Extraction (or) How to use table in R/3 system as datasource in BW?

Hi all,
Hope all are having a great day
Can any1 tell me the steps, for Generic Extraction.
It will be very helpful, if the steps are as much as simpler as posible.
I know to create a simple cube in BW.
I have this much knowledge, depending on this can any1 tell me the steps for Generic Extraction from R/3.
examples wud be vry useful
Regards,
Sourav

hi,
Maintaining Generic DataSources
Use
Independently of application, you can create and maintain generic DataSources for transaction data, master data attributes or texts from any kinds of transparent tables, database views, InfoSets of the SAP query or using a function module. As a result, you can make use of the generic extraction of data.
Procedure
Creating a Generic DataSource(RSO2)
       1.      Select the DataSource type and give it a technical name.
       2.      Choose Create.
The creating a generic DataSource screen appears.
       3.      Choose an application component to which the DataSource is to be assigned.
       4.      Enter the descriptive texts. You can choose any text.
       5.      Choose from which datasets the generic DataSource is to be filled.
                            a.      Choose Extraction from View, if you want to extract data from a transparent table or a database view. Enter the name of the table or the database view.
After generation, you get a DataSource whose extract structure is congruent with the database view or the transparent table view.
For more information about creating and maintaining database views and tables, see the ABAP Dictionary Documentation.
                            b.      Choose Extraction from Query, if you want to use a SAP query InfoSet as the data source. Select the required InfoSet from the InfoSet catalog.
Notes on Extraction Using SAP Query
After generation, you now have a DataSource whose extract structure matches the InfoSet.
For more information about maintaining the InfoSet, see the System Administration documentation.
                            c.      Choose Extraction using FM, if you want to extract data using a function module. Enter the function module and extract structure.
The data must be transferred by the function module in an interface table E_T_DATA.
Interface Description and Extraction Process Flow
For information about the function library, see the ABAP Workbench: Tools documentation.
                            d.      With texts, you also have the option of extraction from domain fixed values.
       6.      Maintain the settings for delta transfer where appropriate.
       7.      Choose Save.
When extracting, look at SAP Query: Assigning to a User Group.
Note when extracting from a transparent table or view:
If the extract structure contains a key figure field, that references to a unit of measure or currency unit field, this unit field must appear in the same extract structure as the key figure field.
A screen appears in which you can edit the fields of the extract structure.
       8.      Editing the DataSource:
        Selection
When scheduling a data request in the BW Scheduler, you can enter the selection criteria for the data transfer. For example, you may want to determine that data requests are only to apply to data from the previous month.
If you set the Selection indicator for a field within the extract structure, the data for this field is transferred in correspondence with the selection criteria in the scheduler.
        Hide field
You should set this indicator to exclude an extract structure field from the data transfer. As a result of your action, the field is no longer made available in BW when setting the transfer rules and generating the transfer structure.
        Inversion
Reverse postings are possible for customer-defined key figures. For this reason, inversion is only possible for certain transaction data DataSources. These include DataSources that have a field that is indicated as an inversion field, for example, the field update mode in the DataSource 0FI_AP_3. If this field has a value, then the data records are interpreted as reverse records in BW.
Set the Inversion indicator if you want to carry out a reverse posting for a customer-defined field (key figure). The value of the key figure is then transferred in inverted form (multiplied by 1) into BW.
        Field only known in exit
You can enhance data by extending the extract structure for a DataSource using fields in append structures.
The indicator Field only known in Exit is set for fields of an append structure. In other words, by default these fields are not passed onto the extractor from the field list and selection table.
Deselect the indicator Field Only Known in Exit to enable the Service API to pass on the append structure field to the extractor together with the fields of the delivered extract structures in the field list as well as in the selection table.
9. Choose DataSource ® Generate.
The DataSource is now saved in the source system.
Maintaining Generic DataSources
        Change the DataSource
To change a generic DataSource, in the initial screen of DataSource maintenance, enter the name of the DataSource and choose Change.
You can change the assignment of a DataSource to an application component as well as the texts of a DataSource. Double-clicking on the name of the table, view, InfoSet or extract structure takes you to the appropriate maintenance screen. Here you can make changes required to add new fields. You can fully swap transparent tables and database views, but not InfoSets. If you return to the DataSource maintenance and choose Create, the screen for editing a DataSource appears. To save the DataSource in the SAP source system, choose DataSource ® Generate.
If you want to test extraction in the source system independently of a BW system, choose DataSource ® Test Extraction.
        Delta DataSource
In the Change Generic DataSource screen, you can delete any DataSources that are no longer relevant. If you are extracting data from an InfoSet, delete the associated query. If you want to delete a DataSource, this must not be connected to a BW system.
For more information about extracting using SAP Query, see Extraction using the SAP Query.
hope this helps.
assign point if so
partha

What are the roles in CRM implementation Project(all generic extractions)

Hi Gurus,
Now I am placed from a support project from BW (CRM) implementation project(all are generic extractions).
& I am also new to implementation project.
what are the neccessary steps to be taken when we are implementing BW for CRM.
Gurus please clarify my doubts.
1. what are the steps in implementation project in detail(as a developer).
2. what are the sizes of the cubes,ODS & How to decide them.
3. what are the neccessary steps for Master data & Transaction data.
4.How to make the functional specifications for Infoobjects,cubes,ODS,Remote cubes,Multiproviders.
5.can we change to delta loads to full loads if yes what happens to existing data.
6.How flat file extraction used in the case of crm& how to do ascii format.
7.What are the steps to be taken when we are creating Queries & Reports in BW CRM.
It's very urgent.
thanks = points.
Bwcheta.

1. what are the steps in implementation project in detail(as a developer).
U have to basically to the techinal design after understnading the functional designs and implemnet the same( creating infoobjects, datatargets, datasources, queries etc.). Then u have to load data and do the unit testing on the same.
2. what are the sizes of the cubes,ODS & How to decide them.
Completely the business reqmnet and the data that the client wants to load.
3. what are the neccessary steps for Master data & Transaction data.
U have to understand ur master data and transaction data on the basis of whch u have create ur infoobjects and load data in them and finally in the datatarget.
4. can we change to delta loads to full loads if yes what happens to existing data.
Sure u can do that by choosing Full update in the infopkg. It will just load the complete data instead of changed records.
*Hope it helps.

When we go for Views and Function Modules for Generic Extraction

Hi Experts,
Can you please explain when we go for extracting the data using Views and when we got using Function Modules using Generic Extraction from R/3 system to BW with examples. And also can you explain when we go for delta for the above both scenarios.
Thanks for you help in advance
Rohith

Hi,
Scenario for Extarction using FM
Imagine the scenario where you need to extract data from
tables having no common field between them and thereby preventing you from creating a view on top of those tables..
Or simply consider tables that are highly unrelatd in terms of fields, but you have a requiremnt to extract data from them.
Also Refer.
create generic extractor based on 2 tables
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Steps.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
http://help.sap.com/saphelp_nw04/helpdata/en/86/1c8c3e94243446e10000000a114084/frameset.htm
Scenario for Extraction using View
If there are more number of tables and data in those tables can be represented using joins then we can use this type of extraction
For more info Refer these links
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
For GEneric Delta refer these links
[generic with delta;
[https://forums.sdn.sap.com/click.jspa?searchID=11388803&messageID=5164737]

Generic Extraction Delta Loads

Hi Experts,
I am facing problem is I want to extract the data in Generic Extraction in View, Suppose my requirement is I want to delta loads every 1 hour per day, how can i do, Generic Extraction possible are not delta records.
Note:- LO Extraction is possible like we have update mode we can scheduled hours in everyday, But Generice Extraction possible are not.
Please provide me solutions ASAP.
Thanks in Advance......
Regards,
Bharathi.

There are various delta method
1.calday.
2.time stamp.
3.Numeric pointer.
For youe requirement Time stamp will work.
Please check weather you have any field related to time.
Thanks,
Saveen kumar

Deltas in generic extraction

how can we set delta updates in generic extraction?can any one help in this

Hi Praveen,
Please do check the link for step by step for generic extraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
(navigate with expand left nodes)
Check these links:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
<b>For Generic:</b>
>Go to Tcode : RSO2,
>There give the name of data source which you want to create like transaction data source or master data attribue or Text data source.
>enter
>again in the next screen you need to give application like SD or MM etc
>in the same screen need to select table/view or infosetquery or function module. these are different ways of creating data sources.
>Give the name for the same like if u r creating data source on table give the name of table.
>click on Generic delta which will there in application tool bar and fill the required columns in that screen like type of delta and all
>continue and save
>it will give all the fieds
>enable the check boxes based on your requirement like selection or hide or field only..
>save
Hope This Helps.
Regards,
Ravikanth

BC in Generic extraction

Hi Gurus
Can we use BC in generic extraction ? How?

KR
In this case we called as enhancement of the standard datasource. In your example you need 17 fields and you found one standard datasource which is taking care of your fourteen fields. For other three fields you will do the enhancement i.e you will add these three custom fields in the append structure of standard datasource and you will populate these three fields user exit.
Please see this attachment on How to Enhance standard Data source.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
Re: Enhancement
Hope this helps
Thnaks
Sat

Generic extraction (table,view,functionmodule)

hi
In generic Extaction when we use table and view and function module and sap qu (scenario)
AND
plz send some examples
Please search the forums before posting

Hi,
when Standard Extractors are not supporting to your requirement then we go with Generic Extraction.
Here we have Three different types to design generic extractors
Table
View
Function Module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
https://websmp103.sap-ag.de/~sapidb/011000358700007535452002
Hope this will help you.
Thanks
Prasad

Generic extraction example required

hi guys,
can anybody plz give a real time scenario for Generic extraction, give it in detail, i have to explian the same in interview?
points will be given
thanks and regards..

Hi,
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
(navigate with expand left nodes)
also co-pa
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
LO Extraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Check these links:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Re: LO-Cockpit V1 and V2 update
Also Refer this link:
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
FI-CO 'Data Extraction -Line Item Level-FI-CO
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
FI-GL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapgenie.com/sapfunc/fi.htm
FI-SL
http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
Please reward for the same.

Generic Extraction-example

hello EXPERTS
I am trying to give one presentation about 'Generic Extraction using View'...I know how to explain the process.But as I donot have project experience,I have never worked with Generic Extraction.
Can any one give an example where they used generic extraction(by view) on SAP standard tables.Its enough if you can mention the fields you used and from which tables you took these fields?
Thanks
S

Hi,
Processing steps for creating the Generic Datasource by useing View:
1.Goto RSo2.
Datasource can be created for
a). Transaction Data
b). Master data Attributes
c). Master data Text
2.Specify Application component(SD/MM..)
3.There are three extraction methods to fill datasource.
    i).Transparent table or Database view
    ii).InfoSets of the SAP query
    iii).Using a Function Module
4.Select extraction method extracts the data from a transparent table or database view.
5.select Extraction from View, then we have to create the View.
   a).specify the view name.
   b).choose the view type (Database view) from bellow mentioned views.
      Database view.
      projection view.
      maintainance view.
      help view.
6. Specify Tables and Join Conditions and define view fields.
7. Assign View to Datasource
8. Once you specify view in Data source, the extract structure willgenerate.
9. then select the filds in selection column.
10. Specify Delta-Specific Field and type.
11. Specify Safety Interval and Delta Type and select Save button.
12. Testing the Generic extraction.
Select Datasource option from menu bar-->select Test Extraction or you can check in RSA3.
Regards,
Suman.

Regarding Generic Extraction

Hi Experts,
I m new to SAP BW, I need a information regarding Generic Extraction as the senario is follows.
I created a table with fields,
Customer Id (PK), name, age ***, address
and i maintained five records in it.
i created a generic master data attributes data source using above table
i replicated the data source in bw and run the full update and it is succussful.
Now my requirement is to add 5 more records in the above table and i hav to get those records in bw using delta update.
So, can any one can explain how to maintain delta for that generic datasource and how to run delta update in step-by-step process
regards,
Ramakrishna

Check the PDF doc..on how to create generic delta..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Check this doc for more
http://www.ko-india.com/content/weblogs/generic_delta_explained.pdf
Regards,
R.Ravi
Assigning Points is the way of saying Thanks in SDN!

Reg Generic Extraction

Similar Messages

Maybe you are looking for