Generic Icons on server, others not having problems

At work we have 3 Macs that are all hooked up to the same server. All the Macs are similar, 2-G4 Dual 1.25 GHz and 1 Imac Intel. Out of the 3, only 1, a G4, gets generic icons for Quark, fonts, Illustrator, and photoshop files. Both of the G4s were set up at the same time with the same specifications but when logging onto the server, one "sees" the icons as normal where the other "sees" them as generic.
Is there a setting I need to change on the one Mac that is showing generic icons?
Any suggestions would be helpful?
Imac G4   Mac OS X (10.4.9)  

I also noticed this problem today. And trying to replace the images doesn't help.
Any word from Apple as to why this is occuring would be great.

Similar Messages

  • I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

    I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

    That happened to me for a short period of time after I updated. It didn't do it with all apps, but it did it with a few here and there. Try a few basic standard troubleshooting steps. Close all apps and reset the iPad.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    You can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
    Hopefully it will be something simple, but don't rule out restoring the iOS software, if nothing else works, but start with this easy stuff first.

  • If I ran an ios diagnostic quick test, and was not having problems with my ipod touch before can running that test harm the ipod in any way?

    I chose the wrong category in support before I came to the forum (I chose service request and troubleshooting instead of using ipod with itunes, and they had me run an ios diagnostic quick test. What exactly does that do if I'm not having problems? Can that harm the files or hardware on the ipod if I'm not having any problem with my ipod and don't want to troubleshoot anything on it?

    I have no idea what iOS test you are talking about,. Please provided details.
    I can't imagine that the test would effect the iPod.

  • My OSX10.6.8 only connects to the internet for 5 second intervals??  Modem works fine (husband is not having problem on other computer), restarting doesn't work.  Can browse web just fine for 5 seconds until it disconnects.  Help??

    I am running Mac OSX 10.6.8, but this problem has occurred also while I was running OSX 10.5.  This problem happens about once every two or three months, but seems to occur randomly.  When I try to connect to a wifi network on this computer, it will only connect for approx. 5 seconds before disconnecting, either telling me the password is wrong (which it is not) or a "connection timeout" message.  During this 5 second window, I can access the internet just fine until it disconnects me.  I don't understand why it is doing this.  My router/modem is working fine, my husband is using our other computer without problem.  In the past, restarting my computer a few times seems to do the trick.  But at the time of my typing this, it has not made any difference.  I am currently connected via an ethernet cable, but I would like to go back to being wireless.  Any advice for me?

    Welcome to Apple Discussions!
    I probably can't help much, but I have occasionally had the same problem. You might try going to System Preferences>Network and look at your Airport connection. See if the diagnostics can help.
    Good luck!

  • Anyone NOT having problems with ITunes 8 and latest firmware update???

    I have really been put off updating to ITunes 8. The firmware update appears to be doing well. Is there anyone that uses a MacBook like myself who have had absolutely NO problems with new Itunes and firmware update? Answers on the back of a £50 note....

    Not having issues now that I have updated all i(hardware) firmware to version 2.1, two phones and an iPod Touch, all work fine (So Far) (knocking on wood). As far as iTunes goes I have mixed feelings. It's a bit faster and more stable, however they removed the "Burn CD" ability from the software. That blows a bit as I would make CD's from some of my play lists to play in the car. Yes I can dock my devices in the car, but as a matter of convenience it's easier to fire up the CD when your in a rush.

  • I am not having problems with wifi but ipad will not accept my password in the secure mode. anyone else having the same problem?

    I am having problems with the Ipad accepting my password in the secure mode in Wifi. I can get into wifi when the secure mode is off. This only started when I downloaded the lastest update for the Ipad. Anyone else having the same problems?  I have rebooted the Rotar and still doesn't work.

    I am not.
    Which secure mode are you using with your wireless network - WEP or WPA?
    Have you tried forgetting this network on your iPad, and/or resetting network settings on your iPad? Both will require rejoining the network and the latter will require rejoining every wi-fi network your iPad has access to when returning within range of the network.

  • Anyone not having problems with the QT 7.1 update?

    Do I dare update? I've read where many are having problems. Should I wait for a 7.2?
    Geoff

    Geoff,
    MacFixit is an excellent trouble shooting sit. However, do not forget what their business model is: trouble with Macs. If anyONE post a problem, they post a fix. The point is: ONE.
    Please search the Apple discussions and you will find very few reports about problems with QuickTime 7.1. In fact, it's one of the updates with the lowest number of problems in a long time.
    But if you want to watch the grass growing, you better wait untill Apple releases QuickTime 11.8 in April 2024 - and hope it does not cause ANY problems to ANY user in the several million installations worldwide.

  • Is there somebody NOT having problems with OS X Server?

    I fell into the trap of Apple marketing and bought XServe with the intent to replace our Windows Server 2003 with OS X Server. The problem with Windows was that its licensing is expensive and you need to keep track of many different licenses for every single thing you want (SQL Server, Exchange and the like). It is also somewhat complicated to manage.
    My first try was with Leopard 10.5. Oh boy, this didn't work out at all. There were so many problems that even after 10.5.2 I considered seriously moving over to 10.4, which I finally did. I admit that I made some mistakes of my own when I installed 10.5. Most notably of course was the DNS setup, which was not quite right. But there are other known issues (ACL not working for example). So I really trained the setup of 10.4 on my MacBook to the point where I got it right. Then I went forward and reinstalled the 10.4 server, moved over the files and user data.
    So, 10.4. It performs much better, less errors, most of the time it works, especially after all the updates. But still it feels very far from the quality of Windows 2003 Server. I hate to say this, but it is true. I am feeling betrayed by Apple, because after using Macs for several years at home and at work (my MacBook), I felt like this is a superior operating system. Not so when I look at the server. Sure, the security holes are there in Windows Server, but they are not so hard to fill and most of the time I could just forget about it. Not so with OS X Server. It is SOOOOO fragile, it almost feels like a china shop. I never know when it will break for no apparent reason. And the things that are so easy to accomplish in Windows (change your IP address or DNS name) are major tasks for OS X administrators and you never know if you will succeed or need to do a full reinstall. So the cost of administration for OS X will quickly become much bigger than the cost of Windows licenses.
    The last problem, still unresolved, is the VPN service. This should be a no-brainer, but no, not in the case of OS X. Starting VPN and connecting to it disrupts OD and Kerberos so that there is no other way but to restart the server.
    So I am kind of wondering if there are ANY users out there who use the server in a primarily Windows/Linux desktop environment so that OS X Server actually works as intended and doesn't need restarting every day? Now I feel very frustrated about all this.

    Hi there, sorry to hear you are having issues with your OS X Server installation.
    I have not used it with Windows Clients yet, although I have to say for our use, i.e. database (mySQL), mail, Adobe Coldfusion Application Server (CF8 Standard) and Web-Server use, it is the most stable and fastest performing machine ever. It smashes our previous DELL server with Windows 2003 Web Edition in every aspect.
    Also, instead of being prompted to install a patch and re-boot about every two weeks, it runs and runs and runs - and if it ever needs to reboot, all sites are up and running within 2 minutes, I kid you not, this is fantastic for us.
    So yes, there are MORE happy users out there!!
    But granted, you find more people asking for help than praising a running system in support forums, that's kinda obvious I suppose
    Good luck fixing your system! Perhaps worth checking for some professional help in the first round of setup in case you were not used to UNIX systems before? There's a lot to learn coming from Windows I feel, but worth it and in the end usually easily fixed, repaired or even re-installed in a fraction of the time it used to take on Windows, let alone it actually works in the end.
    Best regards,
    Jonas

  • Why is it that everytime I try to download Firefox 4 my Adobe reader can't open it because it is a damaged file? Because of this I am not able to download it. Not sure I want to since I see so many other people having problems with it.

    I will start the process of downloading Firefox 4 and then get the message that my Adobe Reader can't open the file because it is damaged or sent through an e mail. I was not in my e mail when I tried to download the update. This isn't the first time that this has happened. I gave up downloading updates in the past just because I would encounter this same problem.

    When you start the download, are you chooseing Save or Run?

  • Dropbox, mail, and other apps having problems after 10.8.2 upgrade

    Here are a few of the symptons that I have experienced-
    Dropbox came up with a relink request and said the folder had been moved
    Mail shuts down suddenly
    Chrom shuts down suddenly and when I re open, the restore banner shows and then disappears
    within Chrom, the recently closed tabs in HISTORY does not show the tabs that were up when the mysterious shutdowns occur.
    comments please!

    Have you tried starting in Safe Mode and see if the problems still occur?
    Restart holding the "shift" key.
    (Expect it to take longer to start this way because it runs a directory check first.)

  • On my 8500 a plus some apps say they cannot connect to server. others have no problem. Any ideas?

    HP officejet pro 8500 a plus with windows Vista.
    Since day one trying to use screen on printer to access apps I can access some and other "kids only for example" will say "the printer is unable to access the server. Check your internet connection and try again" It does this on about 40% of the apps pre loaded on printer from turn on. The other open up just fine and I can print them off.
    Any ideas?

    I have seen this problem but I don't know the solution to it.
    But you can also manage your Apps, including printing them at eprintcenter.com.
    Click on Add Printer (upper left area of page) and sign up your printer there. You will need the printer code; if you don't have it, click on How do I find the printer code? (in blue) under where you enter it and follow the instructions.
    Once you are in, go to the My Print Apps section and select the App you want to look at. You can schedule delivery of apps so that they print out on the days and time you choose.
    I work on behalf of HP.

  • Having problems with security certificates-can't access sites

    I just installed Firefox & am not having problems which result in security certificate error messages. I cannot access Facebook; Pandora, etc.

    Which SSL error message do you get?
    Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
    *https://support.mozilla.com/kb/Secure+Connection+Failed

  • After I modify a photograph, it's thumbnail appear as a generic icon, why? iMac 10.10.2

    When I open a folder containing photos displayed as picture thumbnails, after editing a photo (in Elements 13), when I save the changes, the thumbnail picture disappears and is replaced by a generic icon.  My computer is an iMac 5K running 10.10.2

    Thanks for trying to help. 
    I am using Icons view but the problem is the same in any of the view options. 
    I tried changing the size of the icons it makes no difference. 
    I will try to include two screenshots to show the issue.
    Screenshot 1 shows the finder folder open with 11 photo thumbnails in it. 
    Screenshot 2 shows the same folder after I have modified some of the photos using PSE 13.  I changed several of the photos and two of their thumbnails are now generic icon thumbnails whilst others have normal picture thumbnails.

  • I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud.  I get a message on my phone that says " the URL you are requesting is not found on this server".  Pics and videos have been deleted too.

    I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud.  When I restored my phone from icloud, half of my pics and videos have been deleted, the pics that were restored on my phone are very blurry, and the videos won't play.  I get a message on my phone that says " the URL you are requesting is not found on this server".  I have erased and reset my phone twice, but every time I do it, more pics and videos are deleted.  I have backed up to icloud and iphoto, however, some of the pics are no longer on iphoto either.  Is there someway to get the videos to play on my phone again?  Make the photos not as blurry as they are now and to restore the pics and videos that have been lost?  I really would love to have them back, this phone is supposed to be the best and right now it doesn't seem to be.  Please help if you can.

    I too have noticed that once i restored from iCloud. Pictures blurry and videos wont play!
    Need help too!!

  • I have an Ipad 2 and are having problems sending out emails in one of my email address. I always get a message reading the email was not sent because the server does not allow relaying. This is an email account POP3. I have no such problem with gmail.

    I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
    Richard.

    Welcome to the Apple community.
    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Maybe you are looking for

  • Error in timestamp conversion

    I use an attribute definede oracle.jbo.domain.Timestamp but when I use the getTime() method I get an incorrect result (meaningless, sometime it reverse the natural time direction). How can I solve that issue ? TIA Tullio

  • The Letter É

    I am programmatically generating my .hhc file from Excel VBA and in English, everything is perfect.  When I try to create my French one, that's when it implodes. For example, I have the following sample page which works and shows up correctly in Robo

  • Files are being used by another application?

    I recently tried to update my 5.5 gen 80GB ipod by putting some pictures on it the other day, but when I tried to eject it, it told me that it couldn't because some files were being used by another application. I unsynced the pictures from it but it

  • Hiding .jsp name in the address bar

    hello , first i want to describe my problems.i have a .jsp file and i want to replace the .jsp name to another name in the address bar. i want to hide the .jsp name in the address bar. can u give an example code.then i understand more details. thanks

  • Issues with Oracle in a new location.

    Hello - I recently had to change the computer name of a Windows 2003 SP2 test server. Among other software installed was Oracle 10g r2. There were issues with Oracle in its new location where it was trying to reference the old computer name. I assume