Generic Table Control in ABUMN for multiple transfer of assets

Hi Experts,
Problem Description
We are trying to use transaction ABUMN for multiple asset transfer.
We need to transfer more than one assets to multiple assets by quantity
and value.
Our Efforts/Observation
Instead of going ahead with BDC/LSMW, we tried using table control to utilize standard SAP functionality.
For making this happen, we are trying to use the Generic Table control which is available in ABUMN once you click on "Multiple assets" button.
However, even though we are making fields like
EL7, EL8 etc available in the screen (by removing check from the "Invisible" check box), they are in display mode and are not giving me any option to select quantity and value that needs to be transferred from each asset.
We need to assign these fields to some field like quantity/percentage so that they can be used.
If you see, the column header is also blank.
We need to transfer hundreds of assets, hence requesting you to please
fix this urgently so that we can transfer assets and close the quarter.
Thanks in advance for your help and support,
Nitish Gupta
+919867458892

Hi Nitish,
I'm sorry, transaction ABUMN will never get this functionality you requested.
For mass transfer, customers have the possibilities to use batch input on transaction ABUM or BAPI.
Please refer customer to the following note :   216806 New posting transactions and batch input
regards Bernhard

Similar Messages

Table Control In Modulepool with Multiple Selection.

Hi Gurus,
I have 2 Screens. In First Screen Im entering Plant and Date.
In Second Screen I have 10 Radio Buttons along with Table Control.In table control i have 6 columns.I have to add multiple rows according to radio button selection and for every row it has to carry First Screens Plant and Date also.So, In table Controls table it has to store along with radio button,Plant and Date and the Table control Values.
Pls send me the solution asap.
I'l give good points.
Thanks in Advance,
regards,
kumar.ch

Ok,good

Regarding Print of Single Form for multiple Transfer Order ( LT03 )

Hi All,
When user creates Transfer Order and if transfer order items are more than 22 then split of Transfer Order occurrs and multiple TO's get created in system. The standard prog. RLVSDR40 prints form for each TO's , however the requirment is to print only one form for multiple TO ( Actually TO Form containes info. abt delivery, but triggering point should be from TO creation ) .
There is one prog. RLKOMM40 which is used for multiple processing, whether this prog. will be useful for above requirement. Or is there any exit available for above requirement .
Thanks for help.

Hi,
is there any routines used in Copy controls from order - delivery .- re-check once.
as your post, everything seems fine. I didnt see any reason for not creating single delivery.
is it happening only with this customer or respective ship to's? if yes, something gone wrong in CMR - i.e. complete delivery / order combination etcc., ( just an assumption)
Regards,
ReazuddinMD

Table Control: Disabling editing for a column

Hi everyone. Greetings from Buenos Aires, Argentina.
First of all, I want to apologize for this question in case of it has already been made. The forum is too large to read it completely and I really need the answer, if any, to my trouble.
I have a table control inside a screen. In it's PBO, I coded a module to change the table control attributes. I declared a work area like the line of the table control's control in order to loop it. I mean this:
In the TOP of Table Control (I made it by using the wizard) I have this:
CONTROLS: TC_1 TYPE TABLE VIEW USING SCREEN dynpro_number)
And in the PBO module I have typed the following:
MODULE control_change_attrs OUTPUT.
DATA: wa_tc_1 LIKE LINE OF TC_1-COLS.
LOOP AT TC_1-COLS INTO wa_tc_1.
ENDLOOP.
ENDMODULE.
In the (...), I have put code with such a logic that, depending of the contents of certain fields in the dynpro, it will hide (or not) some columns of the Table Control. This part is made correctly.
This logic, also makes (or should make) the table control to disable the input of a column, depending wether a flag is active or not. This flag is activated in other screen's PAI, which is called depending on the contents of the sy-ucomm field of this screen (the one with the table control).
The (...) is something like this (I'll omit some parts):
IF wa_tc_1-screen-name = 'COLUMN_TO_HIDE'.
   IF gv_flag = 'X'.
      wa_tc_1-screen-input = 0.
   ENDIF.
   MODIFY TC_1-COLS FROM wa_tc_1.
ENDIF.
In a PAI module of this screen, I have coded the following:
MODULE user_command INPUT.
CASE gv_ok_code.
   WHEN 'RUN'.
      PERFORM RUN.
    WHEN ...
ENDCASE.
END MODULE.
And in the RUN subroutine, obviusly among other things, I have this:
CALL SCREEN 0150 STARTING AT XX YY.
In a module in the PBO of the screen 0150, I clear gv_ok_code. In a PAI module, this is what I have put:
CASE gv_ok_code.
   WHEN 'ACCEPT'.
      gv_flag = 'X'.
      CLEAR gv_ok_code.
      LEAVE TO SCREEN 0.
WHEN ...
WHEN ...
ENDCASE
The thing is, when the contents of gv_ok_code is 'ACCEPT' and therefore the flag is activated, then the 0150 screen's PAI finishes and the previous screen's PBO is processed, I know for sure (by the mean of the debugging mode) that the table controls's atrributes are correctly modified, and the most important thing, they stay like that... But, the column desired does not gets disabled, at least not until the NEXT PBO (I mean, it gets disabled when I press the Enter key).
Why is happening this?

Thanks a lot for the response, Max.
I' ve been testing your answer. When I implemented the code that you suggested, after the first PAI, the table control's columns appear as I want.
The thing is, in order to test if the changes in the columns are reflected in the screen after the call of the dynpro no. 0150 (and the obvious return to the first one), I need to be able to select one or more table control's rows (since when I followed the table control wizard, I made it with selection column, and with multiple selection). But, after implementing your code, I'm not able any longer to select any rows.
I click on them, but they don't turn yellow. I commented the call of the module inside the LOOP AT itab... of the PBO and I was able to select them once again, so we're sure the problem is caused because of the call to this new module. But why?
Note: you should know, since the table control is with multilpe selection, the LOOP sentence in the PBO is like this:
LOOP AT itable
       INTO work_area
       CONTROL tc_1
       WITH CURSOR tc_1-current_line.
MODULE change_attribs.
ENDLOOP.
Does that give a hint to you?

How to delete columns in table control (tab Services) for transaction ME51

Hi, gurus!
We're facing this problem in our upgrade: we have a batch input (ME51) in order to create purchase requisitions, but we get an error with the dynpro data (program: SAPMM06B, dynpro: 0102).
We are sure we populate all the required fields in that screen.
The only possible reason we find for that error is the fact that we have two new entries in table control (in tab services=> Current settings there are 67 fixed columns)
We had to add in table T162V (which previously had only 65 columns for each variant): ESLL-SRVMAPKEY y ESLL-EXTERNALID, as described on note 1382685, so table control and table T162V could have same number of fields.
We guess we could solve the batch input error deleting those fields in both table control and T162V, but don't know how.
We really would appreciate any clue.
Thanks in advance.
Best regards,
J. Madariaga

It's an own batch input.
The error is: "Batch input information for dynpro SAPMM06B 0102 does not exist", but the fields in that screen are alright.
And that batch input works fine in another client with same patch level, but without fields ESLL-SRVMAPKEY and ESLL-EXTERNALID in table T162V, so I guess that could be the problem (not sure about it, of course).
Regards,
J Madariaga

Expand Table Control with Fields for Purchase Order Item Overview

Hi Gurus.
Hereu2019s something easy for you, I hope/ think. We just want to additionally show the field u201CMFRPNu201D in the purchase order item overview. See structure MEPO1211 for the table control.
How can we do this? Is it possible without a modification? Is there anything to pay attention to?
Lot's of questions, because we donu2019t find any complete solutions yet. It seems there are no official SAP suggestions for this issue.
Thanks in advance!
Regards
Patric

Is there no one out there who can answer my question?

Data in table control not seen for the Standard Transaction Iview

Hi
I am creating one Standard Transaction Iview for CATS .
While doing print preview in IE 6 , I am not able to see data in Table control(Data Entry Area ).
Can you please provide me the solution for how I can see the data in Table Control
Regards
Ruturaj

Hi David,
I too struggled a lot to find the solution ....atlast got it....It possible by exporting and importing the table control values to Database Index.
1. AT SELECTION SCREEN OUTPUT event triggers when you SAVE and GET the variant.
2. So write the logic in AT SELECTION-SCREEN OUTPUT event.
CONSTANTS: c_vari TYPE char30 VALUE
                         '(SAPLSVAR)RSVAR-VARIANT'.
FIELD-SYMBOLS: <lfs_vari> TYPE ANY.
ASSIGN: (c_vari) TO <lfs_vari>.
IF sy-subrc = 0.
    IF <lfs_vari> IS NOT INITIAL.
      IF ok_code = 'SPOS'.
        EXPORT gt_chars[] TO DATABASE vari(tc) ID <lfs_vari>.
      ELSEIF ok_code = space.
        IMPORT gt_chars[] FROM DATABASE vari(tc) ID <lfs_vari>.
      ENDIF.
    ENDIF.
ENDIF.
In the above logic if OK_CODE is 'SPOS', that is for saving the variant with the name <lfs_vari>.
Similarly if the OK_CODE is other than, 'GET'....that is for retrieving the variant. But in case of getting the variant OK_CODE is not filled with 'GET', but variant will be filled. We should take variant filling as base and do as done above.
It worked for me.....

How to add a new field at a table controll screen change for CIN 2007????

HII EXPERTS
I HAVE TO CHANGE THE SCREEN OF J1IA TCODE . I HAVE TO ADD A NEW FIELD IN THE SCREEN LAYOUT OF TCODE J1IA TABLE CONTROLL.
THANK YOU IN ADVANCE,
PLZ HELP ME OUT AS IT IS VERY URGENT.
SUPRATIK

Hi Supratik,
you can do it by looping at screen structure and append field
dynamically.
see help on 'screen' structure.u will get ur requirement.
Rewards points if helpful.
Regards,
Hemant

Table data getting locked for multiple user for a Z-table updation after EH4 to EHP6 Upgrade

Hi,
We have one new upgraded system at EHP6, earlier system was at EH4 where multiple user can Run one Z T-code and can edit the entries for the Z-table.
This Z-Tcode is calling SM30 internally for updating the Z-Table.
Now in the upgraded system, when one user is into the transation code, and other user runs that T-code, systems throws a POP-UP mesg saying that the data is locked and can be displayed only(can not be edited).
I have debugged the code in both the environment and found that there is one statement Call C_ENQUEUE ID < > field. for which the Sy_Subrc is coming as 2 in the upgraded system which is causing the issue, where as the sy-subrc is 0 in the system at EH4 level.
Can any body tell me why this Z-tcode is not allowing to be accessed by multiple user at same time for Editing(updating the table) .
Regards,
Archana Jha

Hi,
When you create the lock object you can define the keys.
and then you can use those in the ENQUEUE function.
Regards.
regards.

Need ONE Button That Controls Audio/Caption for Multiple Movies

Captiate Version: 3
Flash Version: 9
We created an online course using Captivate 3. The shell is HTML and the captivate (.swf) is embeded to show the content. Because the content inside the captivate movies were too large we had to break up the course into separate pages for loading purposes.
For example:
HTML Page            Captivate File
page001.html         page001.swf
page003.html         page003.swf
page004.html         page004.swf
Now we need a way to use ONE Button to control the Audio/Caption for ALL the movies. The button would be included seperately in the HTML shell along with Captivate movie.
Is this possible? If so please let us know in detail how?
We're open to other ideas. We are somewhat familar with using Captivate variables ect is required.

You can control Captivate SWFs via JavaScript using the CaptivateController. It allows you to control all the standard Captivate variables from HTML.
http://pipwerks.com/2010/08/23/captivatecontroller-updated-to-support-adobe-captivate-5/

How to create BDC for Deletion of Records in Table Control in BDC for PFCG

I have transcation PFCG and have to go to roles of users there.We will upload the users who has to be deleted and it should delete it from the PFCG in one go .Howcan I create a program to delete from the table .If i delete directly from DB table it doesnt show in SAP log how or Who deleted it and the client wants this log which is needed for accountability.
Pls HELP.
George

Hi
You can only indicate the user and all profiles of the user will be deleted.
DATA: BEGIN OF T_DEL_USR OCCURS 0,
                 USERNAME LIKE BAPIBNAME-BAPIBNAME,
      END   OF T_DEL_USR.
DATA T_RESULT TYPE STANDARD TABLE OF BAPIRET2
WITH HEADER LINE.
After loading the users to be deleted:
LOOP AT T_DEL_USR.
CALL FUNCTION 'SUSR_BAPI_USER_PROFILES_DELETE'
    EXPORTING
       USERNAME = T_DEL_USR-USERNAME
    TABLES
        RETURN = T_RESULT.
ENDLOOP.
I'm not sure but perhaps u have to use bapi for commit too: BAPI_TRANSACTION_COMMIT
Max

ERROR WHILE POSTING MIRO FOR MULTIPLE ACCOUNT ASSIGNMENT (ASSET)

Hi Guys,
We created a PO for asset with multiple account assignment. And we immediately do IR instead of GR.
While doing IR it is giving error
1) Quantity delivered is zero - Warning message
2) Account 245350 requires a Transaction Type or is Invalid - Error message
what may be the problem. how can we eliminate and post it
Regards
palani

Hi,
I would assume the G/L account you used was not properly set up. Did you get the same problem if you try to change to another G/L account? Perhaps, get your FI specialist to look into this G/L account-related error and verify it.
Cheers,
HT

Table control bdc for mb1a

Hi All,
Can anyone tell me is table control BDC possible for MB1A tcode
Thanks in advance.

well there may be 2 cases,
1. if ur batch manahement is active and the batch is determined internally,in that case it is not possible.
2.However if ur batch management is not active,then a bdc can be written.
But i would suggest u use an LSMW and record using the BAPI method,SAP provides good standard BAPI's.

Reg : class for creating table control

hi everyone,
             is there any class for creating table control?my requirement is
              created 2 custom containers,one for alv display and other for table control display.
For alv i used cl_gui_alv->set_table_first_display,likewise any class for creaitng table control?????????
pleas find me a solution......
                  thanks in advance......

Hi,
You can use the class CL_TABLECONTROL for creating table control and the method SET_VALUES shall be used to fill values for tha tabcntrl.
Else, you can use the Table Control Wizard to create the tabcntrl easily.
Regards,
Renjith Michael.

Problem in Search help in Table control

Dear ABAPers,
I am using the Table control.In that i am using F4 help.the F4 Value should be based o the
another field in the Table control.how to do this.
Thanks & Regards,
Ashok.

I had a similar requirement. In this table control the values for the F4 help for the shipping conditions depend on the vendor the user selects in the first column.
Here is my code:
PROCESS ON VALUE-REQUEST.
FIELD gs_pod_screen-ship_cond
    MODULE f4_ship_cond.
MODULE f4_ship_cond INPUT.
PERFORM f4_pod_shipping_conditions.
ENDMODULE.                 " f4_ship_cond INPUT
FORM f4_pod_shipping_conditions .
DATA: lt_return TYPE TABLE OF ddshretval,
        ls_return TYPE ddshretval,
        lv_line   TYPE i,
        lv_vendor TYPE bu_partner,
        ls_shlp   TYPE shlp_descr,
        ls_selopt TYPE ddshselopt,
        ls_if     TYPE ddshiface,
        lv_c(132) TYPE c.
* where on the table control did we hit F4?
GET CURSOR LINE lv_line.
READ TABLE gt_pod_sales
       INTO gs_pod_screen
       INDEX lv_line
       TRANSPORTING vendor.
CHECK NOT gs_pod_screen-vendor IS INITIAL.
* the possible values always depend on the vendor => build it every time
* get the search help parameters first
CALL FUNCTION 'F4IF_GET_SHLP_DESCR'
    EXPORTING
      shlpname = gc_shlp_shipcon
    IMPORTING
      shlp     = ls_shlp.
* now we have to set restrictions based on the vendor
CLEAR ls_selopt.
ls_selopt-shlpname = gc_shlp_shipcon.
ls_selopt-shlpfield = gc_name_vendor.
ls_selopt-sign      = gc_i.
ls_selopt-option    = gc_eq.
ls_selopt-low       = gs_pod_screen-vendor.
APPEND ls_selopt TO ls_shlp-selopt.
* set the field for the output
READ TABLE ls_shlp-interface INTO ls_if
       WITH KEY shlpfield = gc_name_ship_cond.
IF sy-subrc EQ 0.
    ls_if-valfield = gc_field_shipcon.
    MODIFY ls_shlp-interface FROM ls_if
           INDEX sy-tabix TRANSPORTING valfield.
ENDIF.
* pass in the base date and call the search help
CALL FUNCTION 'F4IF_START_VALUE_REQUEST'
    EXPORTING
      shlp                = ls_shlp
    TABLES
      return_values       = lt_return.
READ TABLE lt_return INTO ls_return INDEX 1.
IF sy-subrc EQ 0.
    gs_pod_screen-ship_cond = ls_return-fieldval.
ELSE.
    CLEAR gs_pod_screen-ship_cond.
ENDIF.
* transfer the value
MODIFY gt_pod_sales
         FROM gs_pod_screen
         INDEX lv_line
         TRANSPORTING ship_cond.
ENDFORM.                    " f4_shipping_conditions
Hope that helps,
Michael

Generic Table Control in ABUMN for multiple transfer of assets

Similar Messages

Maybe you are looking for