Gereric extractor - help needed badly

Hi Geeks,
I am creating a generic extractor based on a database view for pricing conditions.
I am creating view on table KONP, A508. Also I need to include all the reference tables
needed for amount and quantity fields as well. (other wise causes error R8359 in RSO2)
I am in a strange situation where in for an amount KONP-KBETR (rate) reference table is
a structure RV13A-KONWA (rather than a database table).
In definition phase of view, system does not allow to include STRUCTURES (RV13A), It allows
only transparent database tables.
So I am stuck at a point where in I can not figure out how to pick the correct reference
table & field for KONP-KBETR. Or any work around is available.
Help is needed urgently.
Thanks in advance.
Monica

hi
After u create the view add it to the respective data source and when u save it a structure is generated and that structure can be appended via the append structures button on the top right ...u can append the field from the structure RV13A-KONWA and populated using Exits....
chk out to see if konwa can be used seems to be a possible solution...would make it less painful...if it works
Hope this is helpful
-A Geek

Similar Messages

  • Generic extractor help needed badly.

    Hi Geeks,
    As continuation to questions I posted in the morning.
    1> I have created a generic extractor say ZBW_PRICING.
    2> ZBW_PRICING is based on tables A508 & KONP.
    3> One of the currency fields I am interested in that is
       KBETR has reference field RV13A-KBETR.
    4> Rv13A is a structure not a DB table so I can not give
       reference to RV13A while building view.
    5> So I appended the extract structure with two fields.
       ZZKBETR (rate) & ZZKONWA (currency key) to populate  it  from KONP.
    6> I activated the appended structure as well as extract structure.
    7> In RSA6 when I try to unhide field & save it.
       I get following error.
       The OLTP source still has errors.
       Message no R8417.
    Please help fellows its important for me.
    thanx in advance.
    Monica

    Kunal and Subray,
    I had the same problem while trying to unhide the field.
    I solved the error by giving the proper reference table and field names to the required field in extract structure, which in my case has been a currency field.
    ( Since I have a generic extractor, I changed the Reference Table name to Transparent table name. I changed the field name to corresponding field name within the Transparent table).
    Thank you.
    (Also, I see that Transparent Table name = extract structure name = DataSource name. I think the names might be same for Generice Datasources by default)

  • Urgent Help needed - BADI's in Infospoke

    Hi,
    My Scenario:
    I am pulling data from master data using infospoke into Application server. I need some kind of easy transformations during this stage.
    I got ZSTATE field in my data and I need to restrict my output to only certain states(Ex: NJ,CA, TX , MNetc). Since I can't give those selection conditions in infospoke I need to try BADI. I created a BADI and have target and source structure. Can anyone write me small code for this to eliminate other states and allow NJ , CA, MN, TX etc.
    Source structure: /BIC/CYZZTEST
    target Structure: /BIC/CZZZTEST
    infospoke: ZZTEST
    Field: Zstate
    Class:ZCL_IM_ZZTEST
    Method:IF_EX_OPENHUB_TRANSFORM~TRANSFORM
    Full points to helpful answer!!
    Anil.

    The problem is cross user too - I have two user files on the machine and the same thing happens regardless of which user file I'm working in.
    That points to s 'system-wide' issue.
    Try resetting your SMC.
    Resetting the System Management Controller >>
    Also, you could try booting from your install DVD and see if it does it there. If it does not, it's more than likely a software issue and an Archive and Install should fix it.
    Mac OS X: About the Archive and Install feature >>
    -Bmer
    Mac Owners Support Group - Join us @ MacOSG.com
      Mac611 Mobile Mac Support - about.Mac611.com
       iTunes:MacOSG Podcast | YouTube.MacOSG.com
                       An Apple User Group 
    Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

  • Help Needed Badly. Troubles with exporting video...

    Hello, I created this account pretty much just for this problem, and I'm running under a very tight timeline so please if someone could give me an answer it would be very much appreciated. I have spent 8 hours over the past two nights as well as 4 hours today reworking, trying different things and combing the online community for any others experiencing these problems and/or solutions, so I am extremely stressed and tired if you could bare with me. So here it is:
    I am editing and compiling a theatre production into a movie. I shot the show three times using a Canon HV30, imported the footage on a school computer (iMac, using iMovie '06), exported it in quicktime onto an external HD, brought it onto my computer (which, stupidly, has no firewire). The total file size was 7 hours of footage (85GB), and as a result my HD has about 300MB left on it, and has been excruciatingly slow. I have finished editing the movie, and I am now attempting to share it. All of the sources I have read tell me to share it in Media Browser, which will be accessible from iDVD. I attempted this many times, however I received multiple different error messages, only after watching it 'working' for 4 hours. Some have said that there was no virtual memory left (even after emptying the cache), some said that there wasn't enough HD space left, the exporting had encountered an error, error messages -50, -49, -48, and -47, and the most prominent one that I have been receiving told me that there had been a "parameter error" or something.
    After researching online, I found that the '-50' error messages had to do with exporting to a MSDOS HD, which made sense because I was attempting to export to my iPod (formatted in Windows). My latest efforts have been trying to export it onto my HD, which is formatted for OSX, and has 350GB left on it. And yet, all of the problems persist (including error -50...?) any help would be greatly, greatly appreciated, as the DVD was due two days ago.
    -Sean

    +"Alright, so I moved over the footage and deleted it off the internal..."+
    Did you move the Events using iMovie? If not, the project pointers become invalid, and you would get the error you did. While moving the event using iMovie, you don't need to "delete" anything!
    Couple of options for you to recover from this.
    A> (Slower) Move the Events back to the internal HD, and use iM to move the Event to the Ext HD.
    B> (Faster, but convoluted) Create an alias for the specific Event folder (now on your ext HD/iMovie Events folder) under your local HD's iM Events folder. IM will now be able to "see" the files on the internal HD, even though they're stored on the Ext HD.
    From the Help File: "To keep an item at its original location and put an alias for it in a new folder, hold down the Command and Option keys while you drag the item."
    Sorry you're having to jump through hoops to get this working...

  • Eclipse error | Help needed badly

    Hi,
    My Eclipse was working properly a couple of days back but suddenly It's stopped working and gives me an error : "workspace does not contain a main type,Do you have a public void run method"
    Now,I think the problem Is some how the jar's that I'm trying to upload aren't getting uploaded.
    I say this because a strange problem has arised and I think this might have to do with Eclipse giving the above error.
    This Is what I do to create a new java project
    -Open eclipse
    -save files to workspace
    -click on new > java project
    -Then,give the project a name and then click finish
    -after that I create a new class by right clicking on the project folder > new > class >give the class a name and then click finish.
    -after that I open workspace(thats on my desktop) click on the project folder make a new folder name It "lib" and upload the jar that I need for the project.
    -after this I go back Into eclipse and right click on the project folder and hit refresh,now I see the folder"lib" containing the jar Inside It.
    -I right click on the jar file and select "add to build path",and now theres the Issue comes In.
    I want the jar to Into the reference librarys,because the last time I got the jar In the reference library It worked.
    But this time I can't even manage to find where the reference library Is.
    so when I click on add to build path the jar Instead of appearing in the reference library (which Isn't there) just dissapears.
    I really need to fix this,because I cant test and write code until Its fixed.
    heres a snapshot of how my eclipse framework looks : [http://www.flickr.com/photos/38561743@N03/4122304046/sizes/o/]
    I tried to solve this on my own for hours and hours but It just Isn't working.
    please guys help,I need to solve this.
    Thanks,
    Edited by: Parastar on Nov 21, 2009 7:26 AM
    Edited by: Parastar on Nov 21, 2009 7:27 AM

    Parastar wrote:
    okay guys,I'v tried the eclipse forums for about 24 hours now.
    but no response,those guys are really really slow.
    please,some one here help me out.Quit begging. You've already been told this is not the place for this question. You're complaining about not getting an answer there, and begging people here to answer, as if that vindicates your decision to post here in the first place. But you haven't gotten your solution here either. Which is worse--no answer there, or a bunch of answers that don't help you here?

  • HELP NEEDED BADLY, creating Block Avoider game.

    Could anyone please help me with creating a game called block avoider, i have a link here to show what the game should look like. I need alot of help with it so if anyone is good a coding and see`s this as an easy project helping me would be greatly appreciated.
    LINK TO SIMILAR GAME:
    http://scratch.mit.edu/projects/timo4932/82326

    We can help, but we won't do it for you. Start the game, and post a question if you are stuck and need help.

  • Tiger Help Needed Badly - won't start

    Please can someone help.
    My macbook has died!
    I was restarting the computer because there was an update and the mac told me too. And then in the middle of restarting it froze. I tried everything (held down the start key, tried it with the option button held down too, reset the battery - the works) but all I get is a black screen. I went searching for my system disc to do the repair thing but I can't find it anywhere. What should I do?? I tried calling apple care but they said they don't sell tiger anymore.
    Does anyone know where I could get one?? I bought leapord but I don't want to use it cos' I'm scared it will wipe all my files and give me no option to run a repair/ first aid on it.
    Any suggestions are greatly welcomed.
    Louisa

    Hi Louisa, and Welcome to the Discussions!
    Apple may supply an original System disc for a small fee, you'll need the Serial# of your Book.
    Try this first...
    http://docs.info.apple.com/article.html?artnum=106214

  • Router Help Needed Badly!!!!!!!!!!

    My nephew moved in to go to college and he needs to add his laptop to our wireless router.  We have tried to have him set it up like I set up my laptop.  It keeps telling him it is the incorrect password.  I have even tried resetting to the default settings.  Still nothing worked.  Please, please help us.  He is having to use a really weak network that has a lot of problems.

    First of all you need to check the wireless settings (SSID and Security Key) of your Router.
    Login to the Linksys Setup Page by typing 192.168.1.1 in the address bar...The default password is "admin" in the lower case.
    Go to Wireless Tab and note down the SSID....Click on the subtab wireless security and note down your network key.
    Now search for your network and connect it on the laptop. 

  • Help needed badly Insert text data from xml files into tables

    Hi all, I have asked to do insertion of text from a xml file into tables upon receiving using pro*c. i've done quite an amount of research on xml parser in c but there wasn't much information for mi to use for implementation...
    Guys don't mind helping me to clarify few doubts of mine...
    1. Where can i get the oracle xml parser libs? Is it included when i installed oracle 8i?
    2. Is there any tutorials or help files for xml parser libs where i can read up?
    I need the xml parser to recognise the tags, followed by recognising the text after the tags.
    eg. xml format
    <studentID> 0012 </studentID>
    <student> john </student>
    <studentID> 0013 </studentID>
    <student> mary </student>
    text willl be inserted into tables like this:
    studentID | student
    0012 | john
    0013 | mary
    by the way i'm using oracle 8i on HP-UX. Thanks in advance.

    I can answer one of of your questions at least
    1. Where can i get the oracle xml parser libs? Is it included when i installed oracle 8i?You need the XML XDK. You can use http://www.oracle.com/technology/tech/xml/xdkhome.html as your starting point. I believe the 9i version works for 8i.
    I have no pro*c experience so I can't offer any other suggestions regarding how to do this in pro*c.

  • Help Needed Badly | BlackBerry INC000025111306 | BlackBerry PlayBook - Tablet button does not work, almost stuck, copper under screen, seventh repair

    I was really Humilitated my RIM on this Ticket whcih i rasied.
    1) I bought a new tablet in last november in 2 months i had a Charger issue 
    2) They said this charger issue we cannot replace with new tablet and gave me a refurbished Tablet to me .
    3) Which also had same charging issue and they exchanged 2 more tablets and the last tablet which was given to me by RIM have a safety concern
     - 1 Small mesh of wire is poping out from the Tablet 
     - Power Button is very hard and its not that easy to press,
    So i raised the above ticket and was esclated internally with RMA as well and i got an update from the esclation agents that we will reply back in 2 Days i waited almost 3 weeks and called 2 times in this 3 weeks for an Update asking for a new tablet so that atleast once in all i can jeep a good 1 Tablet.
    But they never bothered to call me and today i called them again and RIM gave me a call back mentioning we cannot give a new tablet we can again check this tablet repair it and give it back , If we cannot repir then give a replacement new/Old tablet,
    I was wondering how can a tablet from RIM can go out without such safety concern ? How a mesh of wire can comeout of tablet so what safety norms RIM is follwoing for customer.
    AM i not humilitated? since after taking all these struggle tto get a good tablet i have been considered as bad.
    What RIM have to say for this, I am planing to take this to Legal department to follow how i can get a justice for this.

    I would have deleted this but can't find a delete?
    At any rate. got the Blackberry going again but it reset it and lost all the info, pictures and so forth.. oh well. at least it is still working.
    Thanks.

  • IPS event query ** Help needed badly**

    Greetings all. Apologies for the dramatic headline but I'm in a bit of a time crunch.
    I have a 4215 running 6.0(3)E1. The device is inline. Below is an event which triggered,
    ========================
    evIdsAlert: eventId=1184881408377311643 severity=low vendor=Cisco
    originator:
    hostId: xyz
    appName: sensorApp
    appInstanceId: 380
    time: 2007/09/24 15:11:25 2007/09/24 15:11:25 UTC
    signature: description=Recognized content type id=12673 version=S149
    subsigId: 0
    sigDetails: Recognized content type
    marsCategory: Info/Misc
    interfaceGroup: vs0
    vlan: 0
    participants:
    attacker:
    addr: locality=any a.a.a.a
    port: 80
    target:
    addr: locality=any b.b.b.b
    port: 51095
    os: idSource=unknown relevance=relevant type=unknown
    actions:
    deniedFlow: true
    context:
    fromAttacker: <stuff>
    riskRatingValue: attackRelevanceRating=relevant targetValueRating=medium 50
    threatRatingValue: 15
    interface: fe2_1
    protocol: tcp
    ========================
    I have an external application which pull this same event from the sensor using a query *like* the following,
    wget --user foo --password hoo http://a.b.c.d/cgi-bin/event-server?events=evAlert
    I'm able to pull most of the event information but not all. What I can't seem to get from query is the " deniedFlow: true" value. I'm seeing something like,
    ></attack></participants><actions></actions></evAlert>
    Notice the "deniedFlow: true" information missing between action.
    Is my wget-ish query missing some arguments which is preventing me from pulling all the same information I can see from the CLI?
    Thanks in advance.

    The problem is that you are using the 5.x-style event-server and so you do not see all of the event fields. You need to change the app to pull from the "sdee-server" and then you will see all of the event fields:
    http://a.b.c.d/cgi-bin/sdee-server?events=evAlert

  • Which version of flash player should i be using to play games on facebook,help needed badly

    Help....how do I get right flash player download for kindle to enable me to play games in facebook

    What OS?
    What browser?

  • Auto Reply help needed badly!

    Please help me if you would!
    I used the auto reply in Oct. when I went on holidays. I clicked on Remove when I got back, but it is still going!
    I really hope someone can help me, as this is driving me & everyone else quite mad!
    Amiably, Jacquie

    I have the same problem. Here is what I tried ( but it didn't work ) maybe it will help you??
    Goto Mail "preferences" then select "rules". Delete the one you don't want.
    If you have a .mac account, go to that instead of your Mail application, goto "preferences" and I think it's under "other"... the one all the way on the right. Make sure the "autoreply" box is not checked.
    I tried both of these with no luck and just posted a similar question. Hope we both find someone to help us!
    -Chrissie

  • Help needed badly with coloring of specific cells in a tble

    I have an existing table and when this code, it colors all the cells in a column. Hoe can I use the funktion getCellRenderer: to color only one cell at a time and implement it in an already existing table.
    THX for any help I can get :)
    ColorRenderer cell=new ColorRender();
    // for(int i=0;i<table.getModel().getColumnCount();i++){
    // TableColumn mod=this.getColumn((this.getModel().getColumnName(i)));
    mod.setCellRenderer(cell);
    And ur ColorRender calss should override DefaultTableCellRenderer like this
    class ColorRenderer extends DefaultTableCellRenderer {
    protected int align;
    public ColorRenderer(int align) {
    this.align=align;
    public Component getTableCellRendererComponent(JTable table,
    Object value, boolean isSelected, boolean hasFocus, int row,
    int column) {
    setHorizontalAlignment(align);
    super.getTableCellRendererComponent(table, value, isSelected,
    hasFocus, row, column);
    if(col==4){
    setBackground(Color.cyan);
    return this;
    }

    Here's a bit of Friday Fun: before you run this code, what do you think the table will look like?
    What will it look like as you click and drag on it to select cells?
    import java.awt.*;
    import javax.swing.*;
    import javax.swing.table.*;
    public class X {
        static class R extends DefaultTableCellRenderer {
            public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
                Component that = super.getTableCellRendererComponent(table, value, isSelected, hasFocus, row, column);
                Color bk = that.getBackground();
                that.setBackground((row + column)%2==0? bk.darker() : bk.brighter());
                return that;
        public static void main(String[] args) {
            JTable table = new JTable(20,10);
            table.setDefaultRenderer(Object.class, new R());
            JFrame f = new JFrame("X");
            f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            f.getContentPane().add(new JScrollPane(table));
            f.setSize(400, 300);
            f.setLocationRelativeTo(null);
            f.setVisible(true);

  • Sorting Issue Help Needed Badly

    *+{color:#000000}*Hello All,*+*
    I am having a small piece of code in my project that retrieves file names from a directory applying filename filter. Well i am happening to get them fine in sorted order. But when i implement that program in other machine it happens that all the file names are in unsorted order. I applied several sorting techniques Collator, SortedSet etc. no luck+</stro
    Any could help me on this. By the way my development machine has JDK 1.6 while implementing system has only JRE1.5 which comes embedded with jBase. Consider i have nothing to do with jBase thats another team's project.{color}+*
    FilenameFilter fileNameFilter = new SEPITFilenameFilter(".JPG");
    String slideURLs[] = slideBase.list(fileNameFilter);
    slideURLs = Storage.sortStringsInAscending(slideURLs);
    public static String[] sortStringsInAscending(String[] array)
    Collator collator = Collator.getInstance();
    CollationKey collationKey[] = new CollationKey[array.length];
    for(int k=0; k<array.length; k++)
    collationKey[k] = collator.getCollationKey(array[k].trim());
    int i=0;
    boolean swapped = true;
    while(swapped)
    swapped = false;
    i++;
    for(int j=0;j<(array.length-i);j++)
    int comparator = collationKey[j].compareTo(collationKey[j+1]);
    if(comparator > 0)
    String tempString = array[j];
    array[j] = array[j+1];
    array[j+1] = tempString;
    swapped = true;
    return array;
    }

    Well, if you simply want to sort the file names themselves, build a List and then call Collections.sort(). String already has a comparator built-in that will sort them ascending for you.
    If you want to customize things, write a Comparator. Then call Collections.sort().
    - Saish

Maybe you are looking for