German character in the file path and failure to compile jsp

Hi,
a customer of mine has installed our product which embeds the tomcat server in a path which contains a german characters ouside the standard en characters (_��), this results in failure to compile the jsp pages, even the example pages that comes with tomcat are failing to compile.
for example if i try to open the numguess.jsp, it fails to compile the file..
Any help greatlly appriciated..
Kind Regards,
K

If your server is running on a Unix derivate, the system might well have UTF-8 by default. Or you might even erroneously have stated in your JSP that it is UTF-8.
If the JSP is ISO-8859-1 (German), then jsp compilation cannot read it (as UTF-8), as illegal multibyte character sequences occur.
Require your customer to save everything as UTF-8, which has its advantages, should the customer go multilingual (Greek, Polish, Bulgarian, Spanish).

Similar Messages

The file path and directory about the .exe file created in LabView, who knows?

I have a project, in the project, VIs and documents(.doc,.txt,.tdms,etc.) in different directories, and when the project run in the labView, it can find the directories and files, but when I created .exe file, I found the directories had changed and I didn't know the directory structure in the file, anyone know it?
Thanks for any reply!
YangAfreet

Have a look at the link in my earlier post:
http://forums.ni.com/ni/board/message?board.id=170&message.id=267439#M267439
LabVIEW Champion . Do more with less code and in less time .

Regarding the Logical Path and file name

Hi all ,
I am using LSMW for creating the BOM of a material .
I am getting problem at step 7 , saying the logical path is pointing to physical directory .
Then i did some R & D . I created the logical path and logical file name using transaction FILE . Then i got the physical path using FM file_get_name.
But when i give those logical path and logical file names , still i am getting prob.... at step 7 of lsmw.
Pls let me know . I did my best unti l now ....
Regards

Hi Raj,
Can you send the Error which you got at Step 7??
It would be of great help if you can send the File Path and the file names you have used.
Regards,
-Syed.

What is the correct way to format file paths and names in the structapp file?

I am trying to create a structured application to export fm files as xml, and probably read the xml back to fm.
In the structured application file (structapp), I need to specify the locations of the various files (DTD, read/write, template, etc). I would like to place these files on a shared server so others can use the same structapp file (that is, a cop of it). What is the correct way to format the file paths and names? Can folders folder names and file names have spaces in them? I tried the following, for example:
\\serverName\shareName\folder 1\folder 2\file name.dtd
I use the same format for the template file and the read/write rules file.
When I try to save an fm file to xml, FrameMaker says that it cannot read the DTD; however, the resulting xml file appears to be well-formed. The DOCTYPE element in the resulting xml is formatted with forward slashes and spaces replaced with %20.
I tried using forward slashes and replacing spaces with %20, but then I get an error about reading the read/write rules.
NOTE: I have another structured application to read xml into fm. This application does not have a DTD file. The template and read/write rules files are specified as above. Except for complaining about a lack of a DTD, the application works fine; it even applies an XSLT in the process. Again, when I DO add a DTD to this latter application, I get the same complaint about not being able to read the DTD.
I am using fully patched FrameMaker 9 in Windows XP.
Thanks,
Van

Hi Van,
The XML parser and FrameMaker are not the same thing. The Error Log says which component created which message. The XSL processor is another option that can throw messages. The "\\server\path\some.dtd" syntax in structapps.fm seems to be fine for some tools, as Internet Explorer with XML tools successfully finds the DTD which appears as "//server/path/some.dtd" in the XML. But apparently Xerxes, the XML parser bundled with FrameMaker, does not like this notation.
If you have a path with a drive letter, "H:\path\some.dtd", FrameMaker turns that into "file:///H:/path/some.dtd". It seems, Xerces would like to see "file:/" in front of absolute paths.
This is what I have in structapps.fm:
Template: \\server\path\projecttemplate.fm
DTD: some.dtd
Read/write rules: \\server\path\projectrules.txt
DOCTYPE: …
Entity locations
Entity search paths
1: \\server\path\
In the structapps.fm I have the DTD without path information. The resulting XML (without XSL postprocessing) then contains just the file name with a relative path back to the book folder (when saving a book as XML). It therefore requires the DTD to be available at this place. I handle this using an event script that fires for NotePreSaveXml and copies the DTD to the folder of the original document.
As I always use XSL postprocessing and using XSLT1 it is not possible to have the doctype-system as a parameter I have this in my XSL stylesheet:
<xsl:output doctype-system="some.dtd" />
For the resulting XML the DTD is expected to be in the same folder as the XML file. This is handled by the same event script as above, it therefore copies the DTD to the source and the target folder.
Bottom line: If you want/have to use UNC paths, you have to do some programming to work around a FrameMaker bug.
- Michael

"File Path and Name" field not displaying correctly

Post Author: DaveWoo
CA Forum: General
Hello,Here's my situation: I'm currently upgrading from Crystal Reports for Visual Studio .NET 2003 to Crystal Reports for Visual Studio 2005. I have several reports (programmatically generated using VB.NET) that use the "File Path and Name" special field. Now, in the old version of Crystal Reports (2003), the field properly displayed the original file path and name; however, in the new version (2005), the field displays as "C:\DOCUME1\Username\LOCALS1\Temp\Filename{F2459406-3719-4C8B-917C-4A7055A18C76}.tmp" - in other words, the location of the temporary .rpt file.How do I get the "File Path and Name" field to correctly display the path & name of the original file, like it did in the prior version?- Dave

This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
Ludek

File Path and Name

Hi everyone,
I am scheduling reports in Crystal Reports Server. My reports contain the "Special Field" File Path and Name. However, when the report is sent out via CRS, it prints a different location of where the report actually resides. In CRS, how can I make the file path and name field print the actual location of the report file rather than a rogue location?
Thanks in advance,
Zack H.

Does anyone have any advice on this issue?
Thanks in advance,
Zack H.

HOw to create a text file in the given path and delete it after the use?

Hi all,
I am trying to create a text file at the given path and delete the created file after the use.
I am using following code.:
import java.io.*;
// write binary data as characters
public class RanIO {
                                        public static void main(String f[])
                                                  // First illustrate append
                                                  String lineSep = "\n";
                                                  try {
                                                                 File temp= new File("C:/Ash","cute.txt");
                                                  boolean ch=temp.createNewFile();
                                                  if(ch)
                                                       System.out.println("file created");
                                                  else
                                                  System.out.println("file Not created");
                                                  //writing to file
                                             /*     PrintWriter p = new PrintWriter(new BufferedWriter(new FileWriter("cute.txt",true)));
                                                  p.print("Emp NO");
                                                  p.close();*/
                                                            // Open fileWriter in append mode
                                                                           FileWriter fos = new FileWriter(temp, true);
                                                                           BufferedWriter bw = new BufferedWriter(fos);
                                                                           PrintWriter pw = new PrintWriter(fos);
                                                                           double d=550;
                                                                      // lineSep = System.getProperty("line.separator");
                                                                      pw.print("Hello");
                                                                      //pw.print( lineSep );
                                                                      pw.print( d );
                                                                      pw.close();
                              boolean det=temp.delete();
                                             if(det)
                                                  System.out.println("File deleted");
                                             else
                                                  System.out.println("File not deleted");
                                             } catch (IOException ioe)
                                                            System.out.println( "Append IO error:" + ioe );
My problem:
1)
I am not able to write to the file. I want to know, where i am going wrong.
It is giving error message like
"Canot resolve Symbol: temp,"
But, FileWriter Constructor should accept a File type parameter.
here temp is a file parameter.
If i am not using file=new file();
i can't delete the file after the use. i.e if i use
PrintWriter p = new PrintWriter(new BufferedWriter(new FileWriter("cute.txt",true)));
how can i delete cute.txt after the use?
2)
I am not able to write to the text file. file is created but, a blank file.
"Hello" is not written into the text file.
can anyone help me in this regard
Thanks in advance
Ashvini

Thank you Ram,
But, i want to create a text file in Append mode.
for that i used
FileWriter fos = new FileWriter(temp,true); But, it is not accepting FileWriter constructor in
this format. if i use
FileWriter fos = new
FileWriter("c:/ash/cute.txt",true); it works fine. !!!!!Here's the javadoc
public FileWriter(File file,
boolean append)
throws IOExceptionConstructs a FileWriter object given a File object. If the second argument is true, then bytes will be written to the end of the file rather than the beginning.
Parameters:
file - a File object to write to
append - if true, then bytes will be written to the end of the file rather than the beginning
Throws:
IOException - if the file exists but is a directory rather than a regular file, does not exist but cannot be created, or cannot be opened for any other reason
Since:
1.4
Are you using jdk.13 or lower ?
>
ONe more doubt, Does flush method deletes a file?
if not, then i need to use
File temp=new File("c:/ash/cute.txt");
FileWriter fos = new FileWriter(temp,true); //which
is again a problem
if(temp.delete())
out.println("File is deleted");
}I don't know whether i am taking it wrong ! or
anything wrong with my coding ! but, after creating
and writing data into a text file. I must delete it
as it contains confidential informations.
Regards,
Thanks.'flush' writes to a file immediately. Else you should explicitly call 'flush' to write contents from buffer to underlying source.
javadoc again
PrintWriter
public PrintWriter(Writer out,
boolean autoFlush)Create a new PrintWriter.
Parameters:
out - A character-output stream
autoFlush - A boolean; if true, the println, printf, or format methods will flush the output buffer
cheers,
ram.
Question; What do you gain by opening a file, writing to it and deleting it in the same program ?

Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

Hi Experts,
I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
custom path and file created from FILE tcode.
Thanks & Regards,
Anusha.

Hi Anusha,
Please give as below.
I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
Regards,
Pavan

How to Print File Path and File Name at the bottom of the Report?

Hi guys,
I have situation where i have to display my file path where i save my file. For example: U:\Reports\Monthly_Reports\Compay_xyz.jsp
also, after the file path line if its possible i would like to display the date where the last modification done on the file.
I read one of the post and some one suggested that use srw.get_report_name() but since i am a new to Reporting i am not sure how to use it.
Can anyone describe me little bit in detail please?
Thank You.

Hi,
Your logic seems to be fine and you should put it in the additional plsql code section "After displaying the page". But you may have to check you syntax by compiling it. You cannot use "LINEFEED". It should be '<br>'. This is the line break in html. Please check your type declaration. Also some ';' is missing after some statements.
Hope that helps.
Thanks,
Sharmila

How to set the file path dynamically based on sytem, username, and date

Hi All,
My requirement is upload the data into one structure like xyz that is related to t.code MCSZ.
file will be in UNIx SERVER .
PATH IS: /sapif
file name is xy789 load .txt
I have to write code in one user-exit
how can i set the file path for this.
shall i put hard code file path?
because i have to writecode in user-exit.
plz tell me how to set the file path based ons syetem, username, date
Thanks in advance
Ram.A

Concatenate the field SY-SYSID, SY-UNAME and SY-DATUM for the file path

Enable and Disable the file paths

Hai i have two file paths one logical file path and other is physical file path.
I took two radio buttons.
How can i enable and disable the file paths by using these radio buttons.
When i select the 1st radio button then 1st file path is in enable and second file path in disable mode similarly for the second radio button also.
It is very urgent .
With Regards,
Prasad.Tallapudi.

i answered in your other post....here is the code again....
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: logfile type string default 'Z_DATALOAD',
FILE(128) TYPE C DEFAULT 'nittest.txt' LOWER CASE.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_LFILE RADIOBUTTON GROUP G1 USER-COMMAND C1 DEFAULT 'X',
P_PFILE RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
at selection-screen output.
if p_lfile eq 'X'.
    loop at screen.
      if screen-name = 'LOGFILE'.
        screen-input = '1'.
        endif.
        if screen-name = 'FILE'.
          screen-input = '0'.
          endif.
          modify screen.
      endloop.
    endif.
    if p_pfile eq 'X'.
      loop at screen.
      if screen-name = 'LOGFILE'.
        screen-input = '0'.
        endif.
        if screen-name = 'FILE'.
          screen-input = '1'.
          endif.
          modify screen.
      endloop.
      endif.
if the problem gets solved...please close both the posts

Adding the file name and path to a document

Is there a way to automatically generate the file name and path (i.e. 'P:\ARF530\BACKGROUND\diagram.ai') to a document without having to copy and paste from the explorer window?

Hi,
So to select the directory, in the WHNE-BUTTON-PRESSED trigger write,
     :<block_name>.<path_item_name> := GET_FILE_NAME(' ', NULL, NULL, 'Choose any directory.', OPEN_FILE, FALSE);
     IF SUBSTR(:<block_name>.<path_item_name>, LENGTH(:<block_name>.<path_item_name>)) != '/' AND SUBSTR(:<block_name>.<path_item_name>, LENGTH(:<block_name>.<path_item_name>)) != '\' THEN
          :<block_name>.<path_item_name> := :<block_name>.<path_item_name> || '\';
     END IF;and to open the file, write,
DECLARE
FT_File TEXT_IO.FILE_TYPE;
BEGIN
IF SUBSTR(:<block_name>.<path_item_name>, LENGTH(:<block_name>.<path_item_name>)) = '/' OR SUBSTR(:<block_name>.<path_item_name>, LENGTH(:<block_name>.<path_item_name>)) = '\' OR :<block_name>.<path_item_name> IS NULL THEN
     MESSAGE('Please Enter file name before continue');
     MESSAGE('Please Enter file name before continue');
     RAISE FORM_TRIGGER_FAILURE;
END IF;
FT_File := TEXT_IO.FOPEN(:<block_name>.<path_item_name>, 'w');
END;Regards,
Manu.
If my response or the response of another was helpful or Correct, please mark it accordingly

How do I put the file name and path into either the header or the footer?

I need to keep track of pdf documents as their names or locations sometimes change. I need to show both file name and path, preferably in the header. I would also like it to refresh automatically when I change, say, the file name, but that's not as essential as the basic function of showing the file name and path.

You will need to do this with a text field and a Javascript that executes on open.

Specify the output file path and print name when printing pages

hi,
how can i Specify the output pdf file path and print name when i am using the function PrintPagesSilent from AcroAVDoc Object.
My Code :-
Acrobat.AcroAVDoc doc = new Acrobat.AcroAVDoc();doc.Open(path,
"temp");

Dear Irosenth,
i try with different format (doc, docx, xls, jpg, bmp and txt) and it working successfully, but it give an random name for the file which saved in default folder for Adobe PDF print.
you can use the following function:
private void PrintPDF(string[] inputfilepath){
foreach (string path in inputfilepath){
Acrobat.
AcroAVDoc doc = new Acrobat.AcroAVDoc();doc.Open(path,
"temp");
Boolean v = doc.PrintPagesSilent(0, ((Acrobat.AcroPDDoc)(doc.GetPDDoc())).GetNumPages() - 1, 0, 0, 1);doc.Close(1);
and calling it by the following code:
PrintPDF(System.IO.Directory.GetFiles("c:\\t\\printjob"));
copy all files that you want to convert in side the mentioned path and run it program, then check the defualt print path for Adobe PDF printer.
test it and reply me. thanks again

[svn] 3037: Update flex-config. xml files used by the team and qa webapps to use the {targetPlayerMajorVersion} token instead of a hardcoded player version in the library-path and external-library-path .

Revision: 3037
Author: [email protected]
Date: 2008-08-29 06:54:15 -0700 (Fri, 29 Aug 2008)
Log Message:
Update flex-config.xml files used by the team and qa webapps to use the {targetPlayerMajorVersion} token instead of a hardcoded player version in the library-path and external-library-path. This will allow the correct playerglobal.swc to be located when the target player version is set in the flex-config.xml or passed to mxmlc or compc.
Modified Paths:
blazeds/trunk/apps/team/WEB-INF/flex/flex-config.xml
blazeds/trunk/qa/resources/config/flex-config.xml

Unfortunately I don't have the
"org.eclipse.swt.win32.win32.x86_3.1.2.jar" file. On my computer
the folder is not set up the same way (C:\Program Files\Adobe\Flex
Builder 2\plugins) instead it is set up as (C:\Program
Files\Adobe\Flex Builder 2\metadata\plugins) but I've looked in
everything and that file just isn't in there. I've re downloaded it
twice. Still not there. Is there anything else i can do.

German character in the file path and failure to compile jsp

Similar Messages

Maybe you are looking for