How to Print File Path and File Name at the bottom of the Report?

Hi guys,
I have situation where i have to display my file path where i save my file. For example: U:\Reports\Monthly_Reports\Compay_xyz.jsp
also, after the file path line if its possible i would like to display the date where the last modification done on the file.
I read one of the post and some one suggested that use srw.get_report_name() but since i am a new to Reporting i am not sure how to use it.
Can anyone describe me little bit in detail please?
Thank You.

Hi,
Your logic seems to be fine and you should put it in the additional plsql code section "After displaying the page". But you may have to check you syntax by compiling it. You cannot use "LINEFEED". It should be '<br>'. This is the line break in html. Please check your type declaration. Also some ';' is missing after some statements.
Hope that helps.
Thanks,
Sharmila

Similar Messages

How to get file name on the base of extension

hi
reply me
how to get the filename on the base of extension from the
current directory......
for example
i create file with the "igg" extension and save in the folder
where the exe file of director save....
i want when exe run then exe file read filename of the
define( "igg" ) extension with out path just name of the file with
igg extension
tel me how
regards
farhana khan

Here's a solution that requires no xtras:
on GetFilesWithExtension(aFolderPath, aExtension)
-- INPUT: <aFolderPath> should be a valid string
folder path
-- <aExtension> may be a string file extension,
without the
-- dot. For example: "txt" or "igg"
-- OUTPUT: Returns an error symbol or a linear list of file
names
-- in the given folder. If an extension is given, only
-- files with the given extension will be listed. If not,
-- all files and folders will be listed.
vFileList = []
if not stringP(aFolderPath) then
return #stringPathExpected
end if
vIgnoreExtension = not stringP(aExtension)
vDelimiter = the itemDelimiter
the itemDelimiter = "."
n = 0
repeat while TRUE
n = n + 1
vFileName = getNthFileNameInFolder(aFolderPath, n)
if vFileName = "" then
exit repeat
end if
if vIgnoreExtension then
vFileList.append(vFileName)
else if the last item of vFileName = aExtension then
vFileList.append(vFileName)
end if
end repeat
the itemDelimiter = vDelimiter
return vFileList
end GetFilesWithExtension
You can also use
Buddy API's baFileList,
which allows you to do wildcard searching.

How to print file name and date on document

How can we print the file name and date, like in the old days, on a document as a header or footer?

Not the print dialog for iWork but in the app itself. Here is Pages:
Regards,
Colin R.

How to specify file names for the generated code in wscompile

Hi,
We want to follow a certain file naming conventions for the artifacts generated by wscompile.
How is it possible to set the name for the service interface file, service implementation file etc....
This is possible in AXIS ant task Wsdl2Java. How do we do it for wscompile.
thanx

Thanks Chris and c. Under Description I'm presented with three Names for the profile: ASCII, UniCode and Mac Script. ASCII and Mac Script are the same name for the profile, with nothing being in the UniCode Name box. Which do I change -- both?
Am I going to screw things up in Photoshop if I change these names to something I can comprehend? Looks like I may just have to make a sticky-note list of the cryptic profile names with my own descriptive name as a reference. Thanks.

Individual report path with defined file name from the report settings in Testsand 2012

Hi,
I have following task:
I want to test stand 2012 in each sequence to change the path of the report file. But the naming of the file is to be maintained as these settings can be made from TestStand into the report (DisplayName + _Report_ [<FileDate>] [<FileTime>] <unique>. <File Extension). I can not find now, however, the / callback parameter on which the components are assembled path and file in TestStand.
While I can read about the callback "GetReportFilePath" the path and file name, and with the expression: Parameters.ReportFilePath = "c: \ \ electro \ \ SHARE \ \ test protocols \ \ Test Logs \ \" change the path, but the file name will no longer be formed from the settings of TestStand.
I have the suspicion that I'm just not accreting at the right place. Can someone please give me a hint?
greeting Michael
Greetings Michael

See Oracle Metalink,
..Oracle Portal Technical Forum,
....Subject: PORTAL - uploading files (file attachments) with file names.
This message thread outlines javascript code that automatically captures the filename during an upload.

How to get file name of the form attachment?

Hi,
is there anybody who is able to help me with the following problem???
I started my process from Workspace ES and as a first step I attached one locale file (IMG.JPG or IMG.TIF e.g.) as a form attachment. I used "Attachments" bookmark in the Workspace ES.
I need to get file name of attached file in the process!!!
I tried to use "getTaskAttachments" component to get file name of form attachment but without success. This component successfully obtained attached file an stored it in the variable (type list, subtype document) but didn't produce all file attribute informations such as basename or Content Type:
Is there some possibility to obtain file name (including file extension) by using "standard" tools and components of ALC?
Thanks for your suggestions.

Hi LekomDev,
I faced the same situation some time back and this is what I know.
Based on the file type few of the attributes will or will not be populated. (This is what the official documentation says about Document attributes)
The file name that you are looking for would mostly be in 'name' attribute of Document object. The 'wsfilename' attribute is the atrribute which gets used to show the file name into Attachments tab of the workspace.
So, if you are just interested in knowing the filenames then 'name' attribute is the place that you are looking for.
But if you are trying to solve an issue in which Attachments against a Task isn't showing the filenames properly then you would need to copy the 'name' attribute value into 'wsfilename' attribute and then the Attachmetns against a Task would have the correct names.
Tip: Use the Record and Playback option of the workbench to inspect the Document variable and you would see all of the values for a Document variable at desired step in your orchestration.
hope this helps,
cheers,
Parth Pandya
Blog: http://livecyclekarma.wordpress.com

How to modify file name with the press of a radio button

Hello,
I have a simple task that I am having some trouble completing. This is what my program is doing:
My VI takes 3 angles between -180 and 180 and computes the XYZ coordinate using a mathscript node. Then every time I press Trigger, the current 3 angles and their corresponding XYZ coordinate are written to a spreadsheet file.
I need to tweak the VI some more to accomplish the following:
The first time I select the radio button Point (or Line), I would like the spreadsheet file name to be "Point001" (or "Line001"). Then I want to press the Trigger 10 times, write to that file just created, "Point001" (or "Line001"), and after the 10th Trigger, I would like the radio button Point (or Line) to become automatically unselected.
The next time I select the radio button Point (or Line), I would like the spreadsheet file name to now be "Point002" (or "Line002"). Then I want to press the Trigger again for 10 times, write to that file just created, "Point002" (or "Line002"), and after the 10th Trigger, I would like the radio button Point (or Line) to become automatically unselected, again.
And so on...
Basically, I am trying to increment the filename Pointxxx each time I select the radio button. I want to write to that file 10 times, at which point the radio button Point automatically becomes unselected.
I hope it is clear to what I am trying to do. Any help would be appreciated.
r15
Attachments:
Untitled 1.vi ‏67 KB

I attached my working VI.
Now, the problem is that Trigger is saving to a different file each time as opposed to having the 10 Triggers save to one file.
This is what is happening now:
When I have the radio button Point (or Line) selected:
Trigger (1st time) saves to "point1" (or "line1")
Trigger (2nd time) saves to "point2" (or "line2")
Trigger (3rd time) saves to "point3" (or "line3")
Trigger (10th time) saves to "point10" (or "line10")
Then, Point (or Line) is deselected.
What I need is the following:
When the radio button Point (or Line) is selected
Trigger (1st time) saves to "point1" (or "line1")
Trigger (2nd time) ALSO saves to "point1" (or "line1")
Trigger (3rd time) ALSO saves to "point1" (or "line1")
Trigger (10th time) saves to "point1" (or "line1")
Then, the radio button Point (or Line) is deselected.
Next time I select Point, I want the Triggers to write to "point2".
Can you fix this for me?
Thank you
r15
Attachments:
Test.vi ‏71 KB

I was able copy the hardrive of my old macbook from "My Passport" onto the desktop on an older iMac. but i dont know how to make my hardrive and user name be the main one since someone had used it in the past and had their info on the comp. please help!

I recently broke my 2008 macbook. i was able to use an external hardrive to back up my data onto My Passport. I was going to buy a new computer but a friend told me sher had an older version of the iMac. (not sure how old but it doesnt have a camera if that helps) i was able to hook it up and turn it on but i ran into a few problems. 1) the "authentic" user or whatever it says is someone who previously used the computer. i added me as a user but im not sure how to make me the main user. 2) after hooking up My Passport, i was able to drag my files and copy them to the desktop.(i think i did it correctly) now, i dont know how to make my hard drive and applications and iformation the "main " info. The current apps on the iMac are super old versions of iTunes and iPhoto and such. 3) while trying to open the apps from my macbook on the iMac, it said it didnt have the right software to open these apps.
I am so computer illiterate so someone please help!!! Also, i do not have internet in my new apartment yet so if there is a way to make this happen without using the internet that would be preferred. sorry for the horrible spelling and poorly written paragraph.
THANK YOU!!

You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.

Printing file name at bottom of the page

how can i print file name at the bottom of every page in keynote ?

No automated way, although you could add a textbox to the bottom of your master slide(s)

Obtaining file name from the file path given

hi,
how to obtain file name from the file path given

Hi bharath,
1. PC_SPLIT_COMPLETE_FILENAME
2.
DATA : path LIKE pcfile-path.
DATA : extension(5) TYPE c.
path = filename.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
* CHECK_DOS_FORMAT =
IMPORTING
* DRIVE =
extension = extension
name = name
* NAME_WITH_EXT =
* PATH =
EXCEPTIONS
invalid_drive = 1
invalid_extension = 2
invalid_name = 3
invalid_path = 4
OTHERS = 5
regards,
amit m.

How to place file names with thumbnails?

I have several thousand images that need to go online but I cannot for the life of me figure out how to add file names to the thubnails. Every bit of documentation I've read talks about adding it to the larger images only. I figured that part out but can't I have file names for the thumbnails too?

Bummer. I was hoping for a secret key to take me there. I have too
many images that can be scanned via thumbnails and for the detail
shots they can go larger. There is no way I can use this as it is with
9000+ images that need to be gone through quickly. Thanks for the
answer.
Mark

Path and File name of the attachment

Hello Srm Guys,
Where should be the Path and File name of the attachment are stored for a shopping card Item.
Thanks
Ram

Hello Ram,
Execute the function module BBP_PROCDOC_ITEM_GETDETAIL by providing the item guid,object type . Now it will populate the et_attach importing parameter with the attatchement details.
In the ET_ATTATCH internal table , the field PHIO_FNAME/PHIO_PATH_FILE provides the physical storage location of the document.
Hope this info will be helpful.
Regards,
Mani

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper)

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
thank you

Pages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
How will the script determine where the author's name begins and where it ends?
How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
How will the script recognize the year of publication?
For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
Best of luck.
Regards,
Barry

How to not append '.PART' to the file name of the currently downloading file, and just download the file with its normal filename

In Windows, when Firefox (I'm currently using 7.0) downloads a file, it appends ''.PART'' to the file name of the currently downloading file and just renames it to its original file name after it finishes downloading.
I sometimes like to watch a currently downloading video file, so it will be better if Firefox just downloads the file to its actual filename (like what Opera does), so I can easily double click the incompletely downloaded file and watch it with the video player assigned to that file extension, rather than the awkward ''Right click -> Open With -> Choose Default Program'' route with .part files.
Does anyone know how to set Firefox to do this?

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox and prevents Firefox from renaming the .part file.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
* http://kb.mozillazine.org/Unable_to_save_or_download_files

How to incorporate File name and timestamp automatically into select and save file dialog box?

Hello,
i am trying to incorporate the file name which is inputed by the user along with the timestamp into the selected and save file dialog box. Can you help?
Thanks
Solved!
Go to Solution.

You can pass a default file name to the 'File Dialog' Express VI.
Use the 'selected path' output to open the file.
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness
Attachments:
FileDialog.vi ‏21 KB

How to insert the file name to the start and the end of a SQL file by a powershell script

I just began to learn powershell script and I have a problem that I cannot figure out. I have a lot of .sql files. I need to insert its file name to the beginning of the file (After USE statement) and the end of the file (before the last END statement). Is
there anybody knowing how to do this?
Thanks so much
Regards

Actually, I want to add a insert SQL statement to the beginning of the file and the end of the file. Only the file name is a variable and different among
different files. All the other sql statements are the same and can be hard coded. Hopefully it helps –
The problem I think is that I want to add the same thing (except the file name) to hundreds of sql files and only the file name is different. I do not want
to add it manually and want to use a script to add it –

How to Print File Path and File Name at the bottom of the Report?

Similar Messages

Maybe you are looking for