Gerneric Datasources and Outbound Queue

Dear Experts,
I've got some generic Datasources (Delta and Full Update) that work properly with productive BW-System.
Now I'm starting to build up an developement system (wrong order I know) and want to load data using the mentioned Datasources from time to time to get relevant data for testing.
Problem now is, that the generic delta Datasources fail accourding to doublicate keys (loading to dev-system) although in the basic tables for these datasources no doublicate keys are existing (or even are possible due to the table key).
I realized in smq1, that every time when data is transfered to productive BW-System, the counter to the queue for dev-System is incremented. When I delete all the entries in smq1 all the updates for dev-System work fine.
In one of the threads here I read, that generic Datasources do not have outbound queues. (Re: Generic Data Source issue).
So is there any way to turn of the outbound queues for specific (generic) Datasources? I do not want to turn them of in general as we use standard delta Datasources for Controlling.
Or how is the "normal" way to transfer data to a dev-System?
(One more information: productive system is 3.5; dev-system is 7.1.)
Thank you in advance
Kind regards
Philip
Edited by: Philip Munz on Nov 17, 2009 8:50 AM

ok,
after some days of searching and reading I now understand my problem.
For all, who face the same problems in understanding delta-updates, qrfc, rsa7 and so on, please have a look at
http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417800)ID0216771750DB11245246034303112354End?rid=/library/uuid/40427814-376a-2c10-5589-bc1aaa6692c3&overridelayout=true
again thanks for the help
kind regards
Philip

Similar Messages

Compare creation of Datasources and JMS Queues : SAP vs (Weblogic/Websphere

I am used to creating JDBC Datasources and JMS Queues on Weblogic/Websphere thru their Admin applications.
Can someone compare/contrast that process to that on SAP's netweaver ( either using NWA or Visual Administrator).
Thanks

Hi Parag,
For the process of creating JDBC datasources and JMS resources @ SAP NetWeaver you can refer to the documents here on SDN and help.sap.com, and compare that process for yourself, thus not being influenced by others' biased or unbiased opinions.
For NetWeaver 04 and 04s these would be:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b0/6e62f30cbe9e44977c78dbdc7a6b27/frameset.htm">JDBC Connector Service</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/22/cf4e71c46cdb4da31153be96c5389f/frameset.htm">JMS Connector Service</a>
For the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/javaee5">Java EE 5 Edition</a>:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7bb9751d-0e01-0010-febd-c3adce2c408c">Working with Database Tables, DataSources and JMS Resources</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/806e75a0-0e01-0010-2587-fc518de8ac1a">Administration Guide</a> -> section "Application Resources Management" (pages 89-104)
Hope that helps!
Your feedback/findings are very welcome!
-Vladimir

Significance of Inboun and Outbound queue in sales order replication

Hi CRM Leads,
What is the significance of Inbound Queue and Outbound queue in saleas order replication from CRM to ECC.
What exactly happens in Outbound Queue and Inbound Queue.
Thanks,
Sandeep
What

Inbound - Tcode: SMQ2 : Inbound in the context of CRM and this queue shows the business transaction, master data and configuration data that are coming from ECC into CRM .
Naming Convention for Queues
The names of queues for data transfers from an ERP back end to the CRM server are made up as follows:
R3A (from ERP back end to CRM)
    I for the initial data transfer / for Data Synchronization
    D for the delta data transfer
    U for loading to the ERP back end
    R for Defining Requests
    <Object> Name or part of object name, or the name of the higher-level independent object
    <Key> Only delta queues are subdivided by keys
Outbound - Tcode SMQ1 - Outbound in the context of CRM and this queue shows the transactions and data that are going from CRM to ECC
See more on [Using CRM Queues|http://help.sap.com/saphelp_crm70/helpdata/EN/49/2d9d9707361903e10000000a42189c/content.htm] following the link.
Read the [CRM Adapter Framework|http://help.sap.com/saphelp_crm70/helpdata/EN/49/2e33a2a6c51d24e10000000a421937/content.htm] for advanced learning.

Diff. between using inbound queue and outbound queue.

Hello All,
Can somebody please explain me the diff. between using inbound and outbound queue?Thanks.
Best Regards,
Tushar

Hi Tushar,
I hope you will find the answers here:
/people/somnath.manna/blog/2006/12/21/demystifying-cif
/people/somnath.manna/blog/2006/12/31/demystifying-cif--part-ii
Regards
Alper

Impact of inbound and outbound queue

Hi,
I have created the service request in CRM and replicated to r/3, what is the impact on inbound and outbound queue of R/3 and CRM server.
Thanks in advance

Hi
if the mb doc is passed to R3 ok if not you can come to know in smw01 if it gets bounced to crm you need to check for error analysis why bounced, if it get posted R3 inbound queue to r3 is succefull if get bounced back to crm the out bound of crm is failed then depending up on error analysis you should proceed in order to proceed further how to push the transaction to r3 by clearing the middlle ware struck up
CRM Impact is : succefully sent to r3 using mb docs by out bound quue
R3 : if gets bounced in bound quueue is failed to receive the CRM's out bound so you need to rectify in CRM only.
Reward for useful
Venkat

Messages stuck in QRFC inbound and outbound queues by system error

Hi Experts,
We faced a big problem in our PI server which stopped all the traffic in the iDoc to File interface. Both the QRFC queues (inbound - SMQ1 as outbound - SMQ2) where stuck by a system error.
In IDX5 of PI we saw two inbound iDocs on exact the same date/time of creation. Both iDocs are displayed in SXMB_MONI with the status "Canceled - Since Already Processed". The output files of both iDocs are generetad on the outbound side.
The output files are genereted with a date/time stamp in filename exactly as: "pi_20101106-221812-437.dat" and "pi_20101106-221812-438.dat". So it seems that both processes where running on exact the same time.
When looking into the system error we see the following details:
com.sap.engine.interfaces.messaging.api.exception.DuplicateMessageException: Message Id 00505697-181b-1ddf-babd-68f1ac208528(INBOUND) already exists in duplicate check table: com.sap.sql.DuplicateKeyException: [200]: Duplicate key
This caused that the QRFC queues where both stuck in inbound as outbound with a SYSERROR, so PI stopped and the queues should be reactivated manually.
Does anybody have some idea of the real cause of this error. We really want to prevent such situation in the future.
Thanks in advance!
Best regards,
Joost

Hi Joost,
Are you using an adpater module to avoid the same file name processed by the receiver channel ???
If this is the case change the filename and retest flow otherwise remove the module (ex: localejbs/AF_Modules/MessageTransformBean - Local Enterprise Bean) from the channel check it whether the file getting processed or not...
OR...you have an incorrect module configuration in the receiver channel.
Do not remove the standard SAP module and make sure that you add additional modules before it.
cheers,
Ram.

ODS Delta Process, DataSource and Delta Queue

Hi to all,
loading data from a SAP source system into SAP BW 7.0 via generic 3.x datasource causes problems.
Here is a short description:
The data flow is from a source table using a generic extractor into a target ODS in full update mode.
Update rules should move data from table structure into ODS structure in this way:
Source table structure
CustKey1     Key2
13386          C23
13386          B14
13387          A13
13387          E25
ODS structure
CustKey1     col1     col2
13387          A13     E25
This works pretty well - as long as all records with the same CustKey1 are transfered in the same data package. Data Browser (SE16) shows the situation in ODS-"New data" view (data is not activated):
Request    Data_packet_number     Data_record_number      CustKey1
112           000003                  1.061              0000013386
112           000004                      1              0000013386
112           000004                      2              0000013387
There are two records for CustKey1 0000013386 with
data record 1.061 in data packet 000003   and
data record       1 in data packet 000004.
The obove constellation is the cause for errors in the ODS Delta Queue and subsequent data processing.
I think there may be one solution to solve the problem by changing the Delta Process of the Data Source.
The properties are:
- Record type: Full, delta, before, after images
- Delta type: Delta from delta queue or from extractor
- Serialization: No serialization, serialization of request, serialization of data packages
But how can I change these settings? Transactions RSA2 RSO2 RSO6 RSO8 don't do this.
What is the right delta process to use?
I have tried changing the delta process generating several 3.x datasources with the following delta processes (see table RODELTAM)
- " " (Full-upload)
- AIE
- ADD
Unfortunately with no effect.
Who can help?
Regards
Josef
Edited by: Josef L. on Mar 20, 2009 7:44 PM

hi venkat,
whenever you load a delta from ods to cube , whatever the data changed in ods since last delta will be updated, hence from you case, both req1 and req2 will be loaded to cube.
Assign Points if useful
Ramesh

Automate monitoring of inbound and outbound queues

Hi,
I think It would be better to go for standard CCMS monitoring, if you dont have very specific requirements.
Yes, we can easily sent out emails for CCMS alerts. You can either use the auto-reaction method
CCMS_Send_Alert_to_ALM (Note 617547 - RZ20: Sending alerts as mail and SMS) or the one
CCMS_OnAlert_Email_V2 (Note 939616 - CCMS auto-reactions: Help with troubleshooting)
Regards,
Francis

Vamsee,
Go for CCMS - if you want to send the alerts to your technical support team. This provides active monitoring for SYSFAIL status and also for long running queues in SMQ2.

Help with status of inbound/outbound queues

Hello SDN XI experts!
I hope one of you can offer some assistance with an XI issue we have, as we currently have no XI resource on site and we're stuck in dire straits!
We have had some problems with our inbound and outbound queues in XI, and a search of the net and SDN hasn't helped yet. Basically, if I go in to transaction SMQ1 or SMQ2, I can see that there are files (or do you call them messages?) are building up in our queues with the status READY. To process these files through XI, I am going in to transaction SMQ1 and SMQ2 periodically, and activating the queue. This sets the status to RUNNING, and the files/messages are processed successfully.
What I'm after is how do I either:
a) set the queues so that they are always in status RUNNING;
b) schedule a job to activate the queues periodically; or
c) is there some other thing I am missing?
Sorry if this is a bit vague, but I have no experience of XI at all. If I haven't provided enough info, please ask some questions. Anything you can do to help would be great as I'm manually doing this ten times a day and it's getting tiresome!

Thanks for all your help guys, it's much appreciated as I have ZERO experience with XI...
I have uploaded a screenshot of SMQR to the web, apologies for the quality, but I only have MS Paint on this desktop:
http://img405.imageshack.us/img405/7202/smqrws8.jpg
Luckily, some files have started to queue up again, so I could take some more screen shots! Here is the view of SMQ2:
http://img166.imageshack.us/img166/7086/smq2mv6.jpg
And then when I double click a queue, you see this screen with the queue in the status READY:
http://img248.imageshack.us/img248/3935/smq22ed6.jpg
Until I go in to SMQ2, double click the queue, highlight it and press activate, the files/messages will just stay in XI. After I press the Activate button on the application toolbar in the third image, the files are processed successfully. i.e. If you go in to SXMB_MONI they have a little chequered flag next to them.
Thanks for all your time guys, points will be awarded if you can help me out!

QRFC and tRFC outbound-queue

in SXMB moni entries,
when the message is
for example inbound: IDOC and outbound: AENGINE, the queue seen is a tRFC outboud-queue,
and when inbound: IDOC and Outbound: PE, the queue seen is a
qRFC outbound-queue
can u explain me why this>?
but nowhere i can see inbound-queues in the MONI. means XBTI* or XBQI*...
can u explain me why?

Hi,
Please see the below link
Eo/EOIO?BE - Queue - ? - /people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
Please go through these links
For queues in message mapping
/people/venkat.donela/blog/2005/06/09/introduction-to-queues-in-message-mapping
Here are the Queues for Asynchronous Message Processing
http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/94553b4d53273de10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f078394a-4469-2910-c4bf-853c75674694
Regards
Chilla

Middleware problem -Outbound queue is stuck in SAP R/3 system with message

Hi Middleware gurus ,
We are stuck with a serious issue . We are trying to download Business partners from SAP R/3 4.6c system to SAP CRM 5.2 system using CRM Middleware
Previously we did a successful Initial download of 2 Business partners from SAP R/3 to CRM . Their BP numbers in CRM are 001 and 002 . The Delta load is working fine for the both the BPs which are already downloaded
Now , the real problem is when we are trying to download a new Business partner . When we set the Filter ( BP no 003 ) in MW adaptor object CUSTOMER_MAIN and start the Initial load again , we see that the Outbound queue is getting stuck with message STOP .
There are two queues generated in SAP R/3 system with names MASS_CRM_CUSTOME and R3AD_CUSTOME . The status for both the queues is STOP and when go for details it mentions sapsuck ..SAPMSSY1 -Message no. SR 053.
Even we checked the txn SMW01, the Bdocs message is "Recived ( Intermediate state) " for Bdoc type BUPA_MAIN.
We really dont as to why the Initial load worked fine with 2 BPs and later when want to do more BP Initial Load the Outbound queue is getting stuck
Also , by unlocking the 2nd queue R3AD_CUSTOME we are able to release it , but the first queue MASS_CRM_CUSTOME* is stuck
Please help us urgently
Regards
Dinesh and Ritvij
Email : [email protected]
Mobile -+91=9704933315

Hi Praveen and other Middleware gurus,
We checked on this . Actually the RFC is used for connecting to SAP R/3 system.
We also raised an OSS message on this and found a reply that in transaction CRMM_BUPA_MAP, we can map the required BP . But the SAP support guy recived an error received the error:
An RFC link is not maintained in the Middleware
Message no. CRM_BUPA_MAPPING051
We have set the RFC link , but still the problem continues!!!
Please help further..
Regards
Dinesh and Ritvij

Data Source combine - Customer Invoice and Outbound Delivery Item Details

Hello,
I need create report where getting the outbound delivery item details ( like ship date, quantities, product, identified_stock)
and also need invoice number ( customer invoice number) which is available in the Customer Invoice Header or Detail source.
But try to create combined data source not able to join Customer Invoice and Outbound Delivery Item Details.
Since after adding any one of them as first datasource and try to add another data source from above then it doesn't shows up.
Anybody have idea how to get the invoice information (invoice number) and shipping data.
Thanks,
Viral.

Hi Viral,
you only can comine data sources of the same access context. The customer invoice data sources have access context "company" and the outbound delivery sources have "site" or "sales". So unfortunately, you can`t combine these data sources.
Best regards,
Andreas

CRM 5.0 outbound queues to Mobile sales

Hi all,
We have upgraded from CRM 3.0 to CRM 5.0.
I am looking at the outbound queues in SMQ1 that are bound to Mobile sales Sites and am not finding any data bundles other than the name of the Replication Object name in the LUW's of these queues.
But in CRM 3.0 I am able to see detailed data bundles for any of the queues.
Does this mean no data is actually being passed from CRM to Mobile Sales.
At this point of time I dont have my commstation up and running to verify this. So I am curious to know how else can I check this?
Thanks.

Hi KP,
This is the default behaviour in 5.0...the queues are fine and you can go ahead with the sync using Conntrans.
Regards,
Ankan

Message is getting struck in outbound queue

Hi All,
I am doing a simple FILE to FILE scenario . The message is getting struck in SMQ2 (inbound queue). If i go to inbound queue and manually UNLOCK the queue entry then only the message is getting delivered . This is a new installation and we are on PI 7.0 .Please let me know if we have to so some configuration .

Hi !
Check if your queues are registered in the SMQS transaction (for outbound queues) or SMQR (inbound). Go there, then enter the queues you need or reactivate them. They should be activated to process the message automatically whenever they receive something.
Try this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/96/8412417301ee6fe10000000a1550b0/frameset.htm
Regards,
Matias.

Outbound Queue stacking up for old destination

Hi Gurus,
I am implementing APO in a client and since the native integration (CIF) uses the same RFC structure as BW I need to keep an eye on BW processes as well.
The problem here is that they´ve migrated to BW7, killing the old 3.5 but leaving the logical system registered.
Now what is happening is that I found >4million queues in SMQ1 to this nowhere destination, which kills my CIF performance.
We´ve started to clean this garbage but the stack keeps adding up from regular goods movement transactions. The BASIS and BW team is not helping much so:
I need to find where I set the relationship between theses transactions and the destination so it does not go to the outbound queue.
thanks for the help!

Hi Anand,
Please go to SMQ1 and in qname enter cf* and then execute.
In the error screen press F8 and then select all PPM related queues and delete.
After that run IM after correction and do run CCR report for the reconcilation by tcode :/SAPAPO/CCR .
Manish

Gerneric Datasources and Outbound Queue

Similar Messages

Maybe you are looking for