Middleware problem -Outbound queue is stuck in SAP R/3 system with message

Hi Middleware gurus ,
We are stuck with a serious issue . We are trying to download Business partners from SAP R/3 4.6c system to SAP CRM 5.2 system using CRM Middleware
Previously we did a successful Initial download of 2 Business partners from SAP R/3 to CRM . Their BP numbers in CRM are 001 and 002 . The Delta load is working fine for the both the BPs which are already downloaded
Now , the real problem is when we are trying to download a new Business partner . When we set the Filter ( BP no 003 ) in MW adaptor object CUSTOMER_MAIN and start the Initial load again , we see that the Outbound queue is getting stuck with message STOP .
There are two queues generated in SAP R/3 system with names MASS_CRM_CUSTOME and R3AD_CUSTOME . The status for both the queues is STOP and when go for details it mentions sapsuck ..SAPMSSY1 -Message no. SR 053.
Even we checked the txn SMW01, the Bdocs message is "Recived ( Intermediate state) " for Bdoc type BUPA_MAIN.
We really dont as to why the Initial load worked fine with 2 BPs and later when want to do more BP Initial Load the Outbound queue is getting stuck
Also , by unlocking the 2nd queue R3AD_CUSTOME we are able to release it , but the first queue MASS_CRM_CUSTOME* is stuck
Please help us urgently
Regards
Dinesh and Ritvij
Email : [email protected]
Mobile -+91=9704933315

Hi Praveen and other Middleware gurus,
We checked on this . Actually the RFC is used for connecting to SAP R/3 system.
We also raised an OSS message on this and found a reply that in transaction CRMM_BUPA_MAP, we can map the required BP . But the SAP support guy recived an error received the error:
An RFC link is not maintained in the Middleware
Message no. CRM_BUPA_MAPPING051
We have set the RFC link , but still the problem continues!!!
Please help further..
Regards
Dinesh and Ritvij

Similar Messages

How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?

Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
Galyna

Hi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1)      Go to System Administration
2)      Go to System Configuration
3)      Go to Portal Content (Right Side Panel), open that folder.
4)      Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5)      That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6)      Choose next
7)      Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8)      Open the Newly Created System.
9)      Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a)      Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b)      Logical System Name - Give the logical name as defined in the backend system
c)      SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d)      SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e)      System Type* - Since we are connecting to R/3, select SAP_R3 system.
f)       System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a)      ITS Description à Give some Description
b)      ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c)      ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
      default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d)      ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a)      Web AS Description -> Give some Description
b)      Web AS Host Name - same as ITS Host Name
c)      Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13)   Select "User Management" property, now fill the required fields like
a)      Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b)      Logon Method - Select UIDPW.
c)      User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14)   Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23)   Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K.

Integration of SAP R/3 system with BOXI3.0 and SAP EP

Hi experts,
I have a requirement like getting data from SAP R/3 system and make it as Xcelsius Dashboard.
So i have installed BOXI3.0, SAP Integration Kit, Live Office, Crystal Report and Xcelsius. Then i have followed this blog /people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication . In this blog explined about how to connect BI System but i want to connect SAP R/3 system.
1. What is purpose of Role import option?
2. What is the type of role i need to import for connecting R/3 system?
3. Do i need to create any specific role for this?
4. How do i integrate Xcelsius dashboard with portal?
Please help me.
Regards,
Kumar.

Hi Kumar,
did you follow the installation guide for the SAP Kit and configure all parts of the publishing ?
if so check all configuration steps to see where it fails.
you can also look here:
Install Part #1
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-1-of-4
Install Part #2
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-2-of-4
Install Part #3
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-3-of-4
Install Part #4
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-4-of-4
SAP Authentication
/people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
Publishing part 1
/people/ingo.hilgefort/blog/2008/09/23/businessobjects-and-sap--publishing-of-crystal-reports-part-1-of-3
Publishing part 2
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-2-of-3
Publishing part 3
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-3-of-3
on the ID : each object receives an ID on BusinessObjects Enterprise. You can look at the documentation and search for the CUID or GUID.
Ingo

XI testing for two SAP R/3 systems with same system id/logical system

Hi
We are currently in the process of upgrading our R/3 4.7 to ECC 6.0 and plan to maintain dual landscape for DEV & QA (4.7 & ECC 6.0) for a period for testing and maintaining existing applications for fixes etc. The second DEV & QA (upgraded to ECC 6.0) are copy of respective systems and these systems are created automatically under technical systems in SLD by auto update (RZ70).
The question is, can we use the same XI system for testing inbound/outbound interfaces for both the systems i.e 4.7 & ECC 6.0 at the same time. I am aware of the fact that XI Technical/Business sytems dependent on unique logical systems, so we cannot create new business system for the upgraded DEV-II ECC 6.0 system.
For your information, we have two slds (one for XID/XIQ and second one for XIP).
What are the options without disturbing & maintaining the current XI system set up?
1) Can we change current Business systems e.g DEV010 to use new technical system i.e DEV-II ECC 6.0 for testing for a period and switch it back to DEV-I 4.7 technical system?
2) or change logitical system name of DEV-II ECC 6.0 and create new business sytem in SLD without interfering the existing setup and modify/create interfaces to use this new business system?
3) Do we need to refresh cache from time to time in XI ?
4) Any other implications
We will be upgrading XI to PI 7.1 after ECC 6. 0 Upgrade.
Any views on this would be highly appreciated.
Regards
Chandu

Hi
Technical System was created in the SLD automatically after RZ70 configuration in the new DEV-II system. We then modified Business System to use the new Technical system and carried out following steps:
1)     Original Idoc metadata was deleted from XID
2)     The port definition was deleted
3)     A new port definition was created for new system
4)     The metadata for each idoc type used was re-created in IDX2 , using METADATA -> CREATE
5)     This brought in all known versions of the idoc segments, including the 7.1 version.
I have already checked the guides suggested for our upgrade and we are thinking of going ahead with fresh installation and migrating the interfaces.
Regards
Chandu

Monitoring qRFC outbound queues

Hi,
I need a CCMS monitor on qRFC outbound queues (tcode SMQ1), so that I get notified whenever messages gets stuck for some reason.
I tried with MTE class "CCMS_qRFC_Outbound_Queues_Summary", but it stays green, even after several messages are not processed in the outbound queue.
Does anyone have experience with this?

Read SAP Note 441269 - Setting up tRFC/qRFC monitoring in the alert monitor
That should put you in the right direction.
Regards
Juan

Outbound Queue in ECC with CRM Destination

Dear experts
In ECC - t-code SMQ1, outbound queues R3AD_SALESDOxxxx in destination to the CRM system are in SYSFAIL.
I think those queues are created when an ECC user changes or creates a sales document in ECC. But we don't synchronise sales documents between ECC and CRM.
What are the settings to avoid this outbound queue to be created?
Thanks in advance,
Regards, Stephanie

Hello Stephanie.
Please remove the following table entry in your ECC system:
TBE31 (Application components by Publish & Subscribe interface)
- The following entries must exist for a successful data exchange:
                 Event            00501014
                 Obj.class        BUSPROCESSND
                 Fmodule          CRS_SALES_COLLECT_DATA
   Also see Note 490932.
Best regards,
Maggie

Connecting SAP NetWeaver BI System to Visual Composer via BICS

Hy, i find on service.sap.com the possibility to connect SAP NetWeaver BI System with Visual Composer by BICS. What's BICS?and how can create this connection?
Thank's a lot.
Sincerely yours.
Andrea Maraviglia

Hi Neil,
See https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37 (troubleshooting guide): <b>Kernel dump while generating Web Services and Simple Transformation (XSLT) and problems when upgrading the NSP system from SP8 to SP9.</b>
Download the patch (two files) and overwrite the existing ones with them - that solved the problem for me. This is a direct link to the zipfile:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/bugfixdbdriverfornspsystem.zip
brgds
Søren

Acknowledgements between SAP and Webservices systems

Hi , I have integrated a SAP and legacy system ( with webservices ) . I woul dlike to know how i can enchance the integrations with acknowledgements . It would be nice if both the systems know what happened to their sent message. I have gone through the document 'how to handle IDOC acknowledgements' . It only talks about sender and receiver systems being sap systems.
Any design ideas with acknowledgements ? The Syncronous calls are fine cos they get back a response. I would like to know how to deal with IDOC acknowledgemnts and the response from the webservice interface.
Thank you
Sudheer

>>It only talks about sender and receiver systems being sap systems.
No it doesn't talks only about SAP-SAP system.
the last section(i guess last 2-3 pages) explain acknowledgment in case of legacy-SAP system
Please check the last section of that .pdf
Thanx
aamir

BADI_IDM_HR_COMMUNICATION update employee data in the SAP ERP HCM system.

Hi Guys,
I am using SAP identity management 7.1 and ERP ECC 6.0 EHP4. I amanage to pull data from HCM into identity store and create an account in active directory.
I am now trying to update employee data in the SAP ERP HCM system with the email address using Business Add-In (BAdI) Implementation BADI_IDM_HR_COMMUNICATION of BAdI definition BADI_EXTEND_IDENTITY.
I do not know how to call the BADI from SAP identity management.
Can you please help as i need this to finish the user provisioning ?
Many thanks

Hi Scott,
Thank you very much for your help.
I am working on trying those steps. I will let you know the result.
in this document you sent me above they mentionned "see IC-supervisors-guide.pdf that is delivered within the installation.
I did a full search on the install and could not find it.
Have you seen this file before ?
Many Thanks

Messages stuck in QRFC inbound and outbound queues by system error

Hi Experts,
We faced a big problem in our PI server which stopped all the traffic in the iDoc to File interface. Both the QRFC queues (inbound - SMQ1 as outbound - SMQ2) where stuck by a system error.
In IDX5 of PI we saw two inbound iDocs on exact the same date/time of creation. Both iDocs are displayed in SXMB_MONI with the status "Canceled - Since Already Processed". The output files of both iDocs are generetad on the outbound side.
The output files are genereted with a date/time stamp in filename exactly as: "pi_20101106-221812-437.dat" and "pi_20101106-221812-438.dat". So it seems that both processes where running on exact the same time.
When looking into the system error we see the following details:
com.sap.engine.interfaces.messaging.api.exception.DuplicateMessageException: Message Id 00505697-181b-1ddf-babd-68f1ac208528(INBOUND) already exists in duplicate check table: com.sap.sql.DuplicateKeyException: [200]: Duplicate key
This caused that the QRFC queues where both stuck in inbound as outbound with a SYSERROR, so PI stopped and the queues should be reactivated manually.
Does anybody have some idea of the real cause of this error. We really want to prevent such situation in the future.
Thanks in advance!
Best regards,
Joost

Hi Joost,
Are you using an adpater module to avoid the same file name processed by the receiver channel ???
If this is the case change the filename and retest flow otherwise remove the module (ex: localejbs/AF_Modules/MessageTransformBean - Local Enterprise Bean) from the channel check it whether the file getting processed or not...
OR...you have an incorrect module configuration in the receiver channel.
Do not remove the standard SAP module and make sure that you add additional modules before it.
cheers,
Ram.

Need to know how to check the outbound queue in SAP for data flow into CRM

Hi Specialist's,
I have changed an entry in Customer Master Data in Sap r/3 and this change has come fine to CRM system.I checked the inbound BDOC in CRM ( Trn:SMW01) and it has come fine into CRM system.I am also able to see the affected field in CRM with new value.
I need to know how to check this from SAP side i.e. I have checked the outbound IDOC list (WE02) but could not find the record.
Is there any other way in SAP that i can check?
Also please let me know if there is any other way except IDOC in SAP to send data from R/3 to CRM?
Usefull answers will definitely be rewarded with points .
Thanks,
Abhinav.

Hi Abhinav,
There are no IDOCs generated in R/3 for replication. R/3 system calls BAPI and Function modules remotely on CRM system which are part of the Adaptors provided for middleware.
Try to deregister the outbound queues in R/3 (Transaction SMQS) and see if you get an entry in the Outbound Queue (Transaction SMQ1). I have not tried this.
If you don't get any entry in the outbound queue then definitely there would be some FM at R/3 end which would be calling CRM system remotely.
<b>Reward points if it helps.</b>
Regards,
Amit Mishra

Gerneric Datasources and Outbound Queue

Dear Experts,
I've got some generic Datasources (Delta and Full Update) that work properly with productive BW-System.
Now I'm starting to build up an developement system (wrong order I know) and want to load data using the mentioned Datasources from time to time to get relevant data for testing.
Problem now is, that the generic delta Datasources fail accourding to doublicate keys (loading to dev-system) although in the basic tables for these datasources no doublicate keys are existing (or even are possible due to the table key).
I realized in smq1, that every time when data is transfered to productive BW-System, the counter to the queue for dev-System is incremented. When I delete all the entries in smq1 all the updates for dev-System work fine.
In one of the threads here I read, that generic Datasources do not have outbound queues. (Re: Generic Data Source issue).
So is there any way to turn of the outbound queues for specific (generic) Datasources? I do not want to turn them of in general as we use standard delta Datasources for Controlling.
Or how is the "normal" way to transfer data to a dev-System?
(One more information: productive system is 3.5; dev-system is 7.1.)
Thank you in advance
Kind regards
Philip
Edited by: Philip Munz on Nov 17, 2009 8:50 AM

ok,
after some days of searching and reading I now understand my problem.
For all, who face the same problems in understanding delta-updates, qrfc, rsa7 and so on, please have a look at
http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417800)ID0216771750DB11245246034303112354End?rid=/library/uuid/40427814-376a-2c10-5589-bc1aaa6692c3&overridelayout=true
again thanks for the help
kind regards
Philip

CIF Queue gettign stuck in 'ready' state

Hi,
I am facing a problem in using CIF functionality while transferrting Master data and transaction data from R/3 to APO.
I have selected inbound queue processing for APO system and have also registered the queue in APO.
But when I actually CIF any data, it gets stuck in the outbound queue of the R/3 system in 'Ready' state.
Then I always need to manually activate the queue in SMQ1 to transfer the data to APO.
The same thing happens during online transfer of transaction data.
I want the data to be transferred automatically rather tahn activating the CIF queue each time.
Please help.
Thanks,
Ameet

Hi Ameet
Please following setting.
1. User setting
-R/3 T-CD CFC2 (For debuf Area, please check whether your user has "R" or not)
-APO T-CD /SAPAPO/C4 (For debug, please check whether your user has "R : debug on" or not)
2. Queue scheduler setting in both system
Inbound scheduler
T-CD SMQR please make sure whether you have inbound scheduler setting.
If there is not, you can create it by hitting Registration button.
"Registration" => Queue Name CF*, and lest of it can be leave as default.
Outbound scheduler
T-CD SMQS
Please make sure you have entry to your SCM system.
Type should be "R". If it is not R, outbound scheduler is not activated.
So please select entry and and hit registration button again. Then type will change
to "R".
I hope this help your problem.
Keiji Mishima

Material Master in R/3 - unintended outbound queue to SRM

Dear Experts,
sorry to intrude your mail boxes and thank you very much in advance for any pointers.
I am facing a problem with respect to Materials (material masters).
We have a newly created SAP system connected to our SRM. In this newly created SAP System, the generation/migration of material masters happens for a large number of materials currently. This generation and migration of material masters in this R/3 system has nothing to do with SRM and is only required for the operations within the R/3 system.
But for some reason, all these materials that are being created in this R/3 system, are trying to "make their way" into the SRM, but actually this is not required. As a result, the outbound queue of the R/3 system is completely plugged.
Can you help me understand, which setting could be responsible for the fact, that the material masters are trying to get into SRM. Can this be setting on R/3 or on SRM side and which settings can that be?
Thank you very much.

Hi
Have you scheduled any job SMOF_DOWNLOAD PROGRAM ?
Muthu
Edited by: Muthuraman Govindasamy on Sep 5, 2010 3:10 AM

STOP Status in Outbound Queue

Dear experts,
We have the following queues in our outbound SMQ1 in the ISU-CCS system.
Queue Name
MASS_CRM_CONNOBJ*
R3AD_CONNOBJ*
Destination
NONE
CMQ60TRUST
The queues are stucked when we try to perform initial download from CRM, to extract data from ISU. The further error message that we got in the outbound queue is:
Set by Host name: usahstxu; Transaction: ; Report: SAPMSSY1
Please help!! I'm desperate! This is really urgent Points will be rewarded!!
Edited by: homoSAPien on Jan 7, 2008 8:30 AM

oh well
there is another note too!
SAP note: 574774
well why we need to apply that note to CRM server need to be find out.. me also.. has the same question but never care to figured out... but now i ll do that..
this is my mail address : [email protected] if you found it.. please let me know if i found it then i ll mail you..
Regards
Naeem

Middleware problem -Outbound queue is stuck in SAP R/3 system with message

Similar Messages

Maybe you are looking for