Get-ChildItem directory only (not full path) on error output

Hello,
I currently use the snippet below to check for folder permissions, it outputs a CSV file which details Category, Reason and TargetName. When I open my error.csv file I see the 3 columns being populated, but how can I get a 4th column with the directory name
as well? TargetName outputs the complete path to the folder, I want to also include the directory name in the CSV.
$Path = "C:\test"
$errors=@()
get-childitem -recurse $Path -ea silentlycontinue -ErrorVariable +errors | Out-Null
$errors | select -expand categoryinfo | select category,reason,targetname | export-csv -NoTypeInformation -Delimiter “,” .\error.csv
Any help would be appreciated. At this point I dont think getting the directory name only is feasible with my method. I've tried many exampled but cant seem to get it. As easy as it may sound.
Thank you.

Hi jrv,
I plugged in your suggestion as follows:
$Path = "C:\test"
$errors=@()
get-childitem $Path -recurse -ea silentlycontinue -ErrorVariable +errors | Out-Null
$errors | Select TargetObject
It works but I'm still receiving the full path to the directory. How can I get only the directory name?
You cannot use $errors.  It is owned by the system and will give you issues.
If you want a folder name from a full path just use Split-Path
I took the + out for a reason. It was not a mistake and I changed the name of the variable for a reason.  The custom error variable will fill with all errors and will be created new each time this is run. Try it without changing it incorrectly until
you understand what is happening.  Don't just blindly do things because it feels good or because you saw a friend do it.
$Path = 'C:\test'
get-childitem  $Path -recurse -ea silentlycontinue -ErrorVariable myerrors| Out-Null
$myerrors| %{Split-Path $_.TargetObject -leaf }
PowerShell is very easy If you take the time to learn it. If you just guess you will never learn.  Believe me you could never guess how it works short of a course in software engineering.
¯\_(ツ)_/¯

Similar Messages

  • How to get folder(directory path only not file path) from local file system

    Hi Firends,
    How to get folder(directory path only not file path) from local file system , whenevr i will click on browse button.
    Please give reply for this one , if anybody knows.
    Thanks,
    Anderson.

    Hi Anderson,
    if you're using flash.filesystem.FileReference - then it is run in black box - except of filename, size and creation data (and few other properties available after some operation succeeded). This is part of security features in Flash runtime (described in header section):
    http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/net/FileReference .html
    This for example implies that user can download a content to local machine - but that content cannot be loaded back into Flash runtime. For this you would need either Air runtime flash.filesystem.File:
    http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/filesystem/File.h tml
    (so you would created Air runtime based application: desktop or mobile but not web, even as standalone project) or you would need one of 3rd party tools that add file access/file information features to standard Flash runtime applications converted to standalone native applications.
    hth,
    kind regards,
    Peter

  • How do i get past the "do not have sufficient privileges" error message installing flashplayer?

    how do i get past the "do not have sufficient privileges" error message installing flashplayer? i've googled the problem and seen the other solutions and for some reason cannot get any of them to work for me.

    I've recommended several things here in the forums and like you, I've seen zero success.
    Run as Administrator = no luck.
    Take ownership of the c drive = no luck.
    Create a new (admin) account = no success.
    I've even seen one poster who reformatted and reinstalled Window 7, and no luck.
    Frankly, I'm at a total loss.

  • When creating pdf file am getting [700]** Message Msg700 not in .ini file ** error

    I am new to adobe output server. Am getting " [700]** Message Msg700 not in .ini file **, [397]** Message Msg397 not in .ini file **, [125]** Message Msg125 not in .ini file ** " while creating pdf file. Please help on this issue.

    Is this a new form, or one that was working before ?  Has something changed on the system ?
    Those errors dont really mean anything, so need to understand more around what is happening - a snippet from the log file just prior to the errors to see what is going on ?

  • I want to open a directory only not a file

    Hai
    have a peace day.
    I have a question. I'm looking for a dialog box where the user can browse for a directory. All I can find is a dialog box where you can open a file.
    Is there one to open a directory? If not, how can I solve this so the user can select a directory?
    Thanks.

    yes man
    sorry for wrong information
    do u any sample code
    i tried but i can't get it
    this is my code
    import java.awt.*;
    import java.awt.event.*;
    import java.io.File;
    import javax.swing.*;
    public class Test extends JFrame {
    JFileChooser chooser = new JFileChooser();
    JButton button = new JButton("show file chooser ...");
    public Test() {
    super("Simple File Chooser Application");
    Container contentPane = getContentPane();
    contentPane.setLayout(new FlowLayout());
    contentPane.add(button);
    button.addActionListener(new ActionListener() {
    public void actionPerformed(ActionEvent e) {
    int state = chooser.showOpenDialog(null);
    File file = chooser.getSelectedFile();
    if(file != null &&
    state == JFileChooser.DIRECTORIES_ONLY) {
    JOptionPane.showMessageDialog(
    null, file.getPath());
    else if(state == JFileChooser.CANCEL_OPTION) {
    JOptionPane.showMessageDialog(
    null, "Canceled");
    public static void main(String args[]) {
    JFrame f = new Test();
    f.setBounds(300,300,350,100);
    f.setVisible(true);
    f.setDefaultCloseOperation(
    WindowConstants.DISPOSE_ON_CLOSE);
    f.addWindowListener(new WindowAdapter() {
    public void windowClosed(WindowEvent e) {
    System.exit(0);
    }

  • Installing Acrobat Reader Plug-In Only (Not Full App)

    I'm curious to know if its possible to load the Adobe Acrobat Reader Plug-in portion only in IE and Firefox. Ideally I'd prefer to not have to install the entire application just to view PDF's in IE/Firefox as I rely on a third party application to view, and manipulate, PDF's outside of the browsers. Yes, I can change the association of .PDF's in Explorer or re-install (or perform a repair installation of) the application to restore the file associations, but if I can avoid installing Adobe Acrobat Reader all together, I'd prefer that route.
    Is this possible or does the application have to be installed?
    Thanks
    Jules

    It needs to be installed.

  • Need to apply payment for delivered items only, not full down payment

    Version: (8.8 PL18)
    Description of requirements: (Be able to handle the right amount of down payment when we copy a sales order to an invoice and there is a back order for some items. It actually works fine when we go on an invoice and we copy from a sales order, the system handles correctly the down payment amount when there is a back order. )
    Valid as of: (29/07/2011)
    Business needs: (They need to apply only the part of the payment for the delivered quantities, not ALL the payment.  In addition, the risk of errors to choose the wrong order is higher when you use the u2018copy fromu2019 function)
    Examples: (When you create a sales order with a down payment and you copy this document to an invoice and there is a back order, the amount of down payments should be adjusted according to the back order as it works now for the u2018copy fromu2019 function)
    Current Workaround:
    (We use the u2018Copy fromu2019 function.)
    Proposed solution:
    (The u2018Copy tou2019 function should work exactly as the u2018Copy fromu2019 function)

    It's not just a licensing requirement. Without the RIKLA you cannot make Reader plug-ins at all. Adobe will vet your proposal and decide if they will permit it, and what license fee you will pay.

  • CC for teams installs trial only, not full programs

    Sent user invite from our Teams Console, user accepted, downloaded Creative Cloud installer on user laptop, all applications are in Trial mode!
    What do I need to do to allow the user to actually use the Teams Creative Cloud License we are paying for. Re-invite, uninstall, have Adobe provide a serial number? This has been the first issue since CC was down for 48 hours.  Appreciate any help with solving this issue.
    Andy

    Just to ad some more info.
    We have full Team CC seats and some that are just Premiere and Media Encoder seats.  It is the Premiere & Media Encoder seats that are the problem. They only show up as trial and request that we upgrade the account to the full CC suite of Aps.
    Andy

  • Getting "Table %TEMPLATE does not fit into window" error

    Hello,
    I am trying to print a form to an old EPSON DFX-9000 dot matrix printer and am getting the error message Table %TEMPLATE does not fit into window".
    This only happens when I go to that printer.  I can print fine to a laser printer.
    I have tried creating a new device type and copying over the format from the laser printer, playing with the format, changing formats, ect.
    I have adjusted the size of the window that my template cannot allegedly fit into but still no luck.  I have checked the height and width of the template and the window many, many times and still get the same error.
    Has anyone seen this before?  Please help.   Thanks.

    Hi James,
    You need to see the width and height of the Page Format which you have set in Form Attributes of your smartforms.
    What ever you create should be within this width and height .
    So accordingly adjust the width and height of your windows and components within them
    Regards,
    Dep

  • Getting descriptor version does not match runtime version error

    Thanks,
    I am Using Adope Air SDK2.0 and Runtime Air 1.0.7,
    i have created one HelloWorld application using Adope sample
    code.
    When i am trying to run this using commands :
    i have used : adl HelloWorld.html
    i am getting this error:
    invalid application descriptor: descriptor version does not
    match runtime version
    Plz help me out.. :-)

    The issue I had in Flashbuilder4 has been solved.
    The easiest but possibly not the neatest was too copy the AIR 2 Beta SBK folders and files, then paste the over the flex4.0 sdk file structure. Achieves the same thing and I assume that you have copies of the SDK else where, if you need to roll back.
    The other thing is to make sure the -app.xml that flex creates has the correct 2.0beta description.
    Cheers
    Elliot

  • HT204266 When i sign in App Stores (or Settings iTunes & AppStores), I get an message: "Could not sign in - unknown error"

    help me!!

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

  • Buffering table not up to date error message when creating a Cart

    Hi Folks,
    We are getting a 'Buffering table not up to date' error message when attempting to create a Cart. The error message only happens to the one end user ID only with the others not getting this error, therefore suggesting that my SRM org plan set-up is correct.
    Has anyone come across this previously and what checks are available in the system to resolve this? As mentioned, the attribute check is okay and I have also removed the user ID from the SRM org plan and reassigned again but this has not corrected the problem. We are on SRM 5.
    Thanks. Mike.
    Message:
    Buffering table not up to date
    Method: GET_STRUCTURE_PATHS_UP of program CL_BBP_ES_EMPLOYEE_MYS========CP
    Method: IF_BBP_ES_EMPLOYEE~GET_RL_UNIT_IDS of program CL_BBP_ES_EMPLOYEE_MYS========CP
    Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS_IDS of program CL_BBP_ES_EMPLOYEE_MYS========CP
    Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS_ID of program CL_BBP_ES_EMPLOYEE_MYS========CP
    Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS of program CL_BBP_ES_EMPLOYEE_MYS========CP
    Form: USER_DETAIL_GET of program SAPLBBP_SC_APP
    Form: GLOBAL_FILL of program SAPLBBP_SC_APP
    Form: SC_INIT of program SAPLBBP_SC_APP
    Function: BBP_SC_APP_EVENT_DISPATCHER of program SAPLBBP_SC_APP
    Form: APP_EVENT_HANDLER of program SAPLBBP_SC_UI_ITS
    Edited by: Mike Pallister on Nov 5, 2008 11:44 AM

    Please advise on this problem.  When I try to check the Approval Overview tab for these two shopping carts.
    I got a dump.can anyone help me.
    Information on where terminated
        Termination occurred in the ABAP program "CL_BBP_ES_EMPLOYEE_MYS========CP" -
         in "IF_BBP_ES_EMPLOYEE~GET_RL_UNIT_IDS".
        The main program was "SAPMHTTP ".
        In the source code you have the termination point in line 35
        of the (Include) program "CL_BBP_ES_EMPLOYEE_MYS========CM008".
        The termination is caused because exception "CX_BBP_ES_INTERNAL_ERROR" occurred
         in
        procedure "/SAPSRM/IF_PDO_DO_APV_EXT~GET_AGENT_DETAILS" "(METHOD)", but it was
         neither handled locally nor declared
        in the RAISING clause of its signature.
        The procedure is in program "/SAPSRM/CL_PDO_DO_APV_EXT=====CP "; its source
         code begins in line
        1 of the (Include program "/SAPSRM/CL_PDO_DO_APV_EXT=====CM00E ".

  • Can not refresh server manager Error:0x8007045b

    OS: Windows 2012 R2 Core
    Services: Hyper V
    I was trying to remote reboot and the session hung. No worries I decided I could just reboot the next morning. So I rebooted the next day but when I go into server manager I get
    an errror can not refresh server manager Error:0x8007045b. Did some research found suggestions to fix it using a DISM.exe /Online /Cleanup-image /Restorehealth.
    But then I get an error 1115 A system Shutdown is in progress. I attempt to fix this issue using pskill winlogon but the issue pursistest. I have restarted the server several times now. Not sure how to fix this.
    Thanks in advance,
    Jake

    Hi,
    In addition to the above information,
    Checkout the below thread for similar discussion,
    http://social.technet.microsoft.com/forums/windowsserver/en-US/a700e9f6-4491-4c70-8bd0-d9d3111e2f70/windows-reboot-error
    Regards,
    Gopi
    JiJi
    Technologies

  • "not all variables bound" error in a BI publisher report

    Hi, I'm getting a "ORA-01008: not all variables bound" error in my BI publisher report. The SQL query looks like this:
    select
    ...--a bunch of rows
    from
    tbl1,tbl2,...,tblk
    where
    ...--and conditions performing inner joins
    and
    (('*') in &p_SomeParameter or tbl3.SomeValueOfSameType in &p_SomeParameter)
    Yet, when I comment out this last and condition, it works. Also, the default value for this parameter is ('*'). I get this error even when just trying to look the xml data itself. Has anyone seen "ORA-01008: not all variables bound" caused by a BI-Publisher report before?
    Why haven't I gotten a reply to this? Did I make myself clear enough? The query runs fine in Toad. Therefore this means that BI Publisher is mangling the query before it has a chance to be processed by the Oracle RDBMS. Therefore I want to know why BI Publisher is mangling my select query and causing the RDBMS to return a "not all variables bound" error.
    Message was edited by:
    user586835

    Try, (use ':' instead of '&')
    (('*') in :p_SomeParameter or tbl3.SomeValueOfSameType in :p_SomeParameter)
    )

  • Content is not allowed in Prolog error while configuring File to Mail

    Hi Expert,
    I have a scenario where I have to pick up a file from FTP using sender File adapter and send this file as an attachment using Receiver Mail adapter.
    There are 3 requirements :
    1) File name of the attachment in the Mail should be same as the File picked from FTP.
    2) The Mail content should be "Please find attached the <Filename> for your reference.
         i.e The content has to be dynamic
    3) Subject of the Mail should be dynamic e.g : Apple_<Filename>
    I am facing the following issues :
    1. Since single File is picked up,the file is going as an payload and not as an attachment.As a result when i am doing message mapping,i am getting the error saying "Content is not allowed in prolog" in SXMB_MONI or Runtime workbench.
    2. Since we have dynamic requirements, i have to Use "Use Mail Package" option.It implies that i have to use Message Mapping.But if i use Message Mapping,i get the error "Content is not allowed in prolog".
    I understand that most of the experts would ask me to write UDF's, but if i use UDF i am getting the "Content is not allowed in prolog" error.
    Thanks
    Saurabh

    Hi Saurabh
    Try using PayloadSwapBean:
    http://help.sap.com/saphelp_nw70/helpdata/en/6b/4493404f673028e10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/content.htm
    "Content is not allowed in prolog" could be caused by some encoding issue.
    Regards,
    Giuseppe

Maybe you are looking for

  • Internet does not work after Installation of Oracle10g on SuSE 10 Enterpris

    Hi, I installed SUSE 10 then configured the network services using network manager as it did not work by just putting the DNS servers and router address. The internet was working fine till I installed Oracle 10g. It somehow modified my DNS address fr

  • Transfer of PIR from ECC to APO - Time stamp

    Hi Friends, We are transferring Planned Independent requirements from ECC to APO through CIF. In APO Product view Forecast requirements Date is sync fine with ECC date however the time is setting default to 03:00:00 am. we want the time to be set to

  • MacBook Pro 15" Mid 2012 says only supports Windows 7

    Hi there, I have Windows 8 already running on my MacBook Pro 15" Mid 2012 and now I am trying to install the latest drivers. But when I download the drivers via the Boot Camp Assistant it claims my MacBook only supports Windows 7. I did the manual do

  • Static IP Assignment Not Working With Hostname Entry on Client Machines

    Hello: I'm working through the Oreilly OSX Server book to get my server skills up and, hopefully, to prep for the certification exam. I'm running into a weird little problem though. I have gone through the forums here and I've checked other resources

  • Problem with activation subVI

    Hello everybody!!! Who tells me, why the subVi doesn't start pushing  ok botton?? Thanks a lot!!!! Solved! Go to Solution. Attachments: problem.jpg ‏187 KB