Get Children of a GridPane and Make them bold

Hello,
i want to set the Children of a Gridpane bold. The Childrens types are text.
private GridPane labelPane = new GridPane();
        final Text text  = new Text();
        final Text text1 = new Text();
        final Text text2 = new Text();
        final Text text3 = new Text();
   labelPane.getChildren().addAll(text, text1, text2, text3);So basically im searching for something like this:
labelPane.getChildren().setFont(Weight.BOLD);Does java somehow recognize, that the childrens are from type text, so we can set them bold?
Because ...
Text test2 ) = new Text();
text2.setFont(...)... wouldn't be a problem. Do i have to choose another way?
Thank you,
regards

This is something you would define using CSS - and then assign the respective style class using getStyleClass().add(styleClassName) either on each individual text node or on the grid pane.
In the lattercase CSS might look like this then (didn't check, might not work):
.boldchildren-gridpane .text {
  -fx-font-weight:bold;
}Edited by: Andipa on 06.11.2012 03:32

Similar Messages

  • Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller?

    Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller? This has never happened to me. I'm not an expert at Illustrator, but I do know some fundamentals.

    Thank you for responding so quickly. No apologies necessary - I know this Forum isn't McDonalds - don't expect an answer to be served up right away. You helped me out with a big issue yesterday.
    I am using a mac - OSX 10.7.5
    I have Adobe Creative Suites - CS5 - Illustrator version is 15.0.2
    The contents I am placing are all  Vector - Illustrator files
    But, I wonder about some of the vector files I work with.  Could a "line weight/thickness" be 'assigned' to the drawing and screw things up? I used 'simple' linear (line) drawings from SolidWorks that have been converted to ai files. It's just weird because I checked the stroke of the drawing and it's not out of line.
    I am attaching part of some box labels. You can see how the drawings, of the products, on the 'left side' are "thick" after embedding them. I think the "Global Logo" was pasted into a template not linked that's why it's okay. But look at the Quiet Thunder logo - it looks terrible. These labels are only 2.25" X 6.5", so its important I keep the images lightweight. 
    Your help is very much appreciated. Thank you!

  • HT2470 how would i go about taking multiple files from documents and make them part of 1 master file

    how would i go about taking multiple files from documents and make them into 1 master file? I want to put all documents associated with this project together for easier access.

    From the finder window, click File, click new folder, you can drag all documents into that Folder making it the master folder. You can ajso drag folders into the Master folder, and have them as sub-folders if you wish to  do that. Either way they will all be in one master folder.

  • Will Match remove duplicate songs and duplicate albums and make them into one?

    I have a ton of songs and albums that are like that. Some albums have differnet artwork too. Will match compare these to itunes and make them all unified?

    The only exception is that If it finds an *exact* duplicate (tags and all), it will not upload it; however, it will still leave both copies in your original library (one will have a little cloud with a line through it next to it).

  • How to keep the Sonogram settings and make them "Sticky"?

    I am a Forensic Audio Examiner and would love to use Soundtrack Pro. Does anyone know how to keep the Sonogram settings and make them "Sticky" so you don't have to reset it every time you open up the project?
    Also the Sonogram loses it's frequency range settings while changing the zoom.
    Where is the feedback link for this application?
    Thanks

    are you talking about the spectrum analysis?

  • HT1473 I recently update my iphone and now is not allowing me to access my contacts, emails etc. When I try to switch it on it has an itunes symbol on the front with the usb plug and an arrow. What do I do to get my contacts etc back and make phone calls?

    I recently update my iphone and now is not allowing me to access my contacts, emails etc. When I try to switch it on it has an itunes symbol on the front with the usb plug and an arrow. What do I do to get my contacts etc back and make phone calls?

    To be more clear:
    Was you phone hacked/jailbroken BEFORE you hooked it up?

  • Would like to know how to take itunes and make them caller tunes on iphone

    would like to know how to take itunes on iphone and make them caller tones

    Then type "create iphone ringtones"  or similar into the google search bar.
    You will find several ways to it.
    If you have a Mac as your signature says, then you have posted in the wrong forum - this is the windows forum - and you can use Garageband to make ringtones.

  • How do I best integrate existing laptops for a new server?  Can I use the existing home folders on the laptops and make them into Network Users?

    How do I best integrate existing laptops for a new server?  Can I use the existing home folders on the laptops and make them into Network Users?

    Yes it will work.  I've done it for a few users in my small office.  As with anything, there are quirks that you may or may not experience.  Most quirks are app-related, due to app developers hard-coding absolute paths into their apps for things like temp files (Photoshop).  Strategies for resolving these sorts of quirks can be found via google.  You would probably have seen these quirks already when using server-based home folders for your kids.  If you haven't noticed them, then you're probably fine.
    The tech note you cited should be fine.  It doesn't explicitly say so, but you'll need to enable ssh on your server, at least temporarily, so you can upload your home folder to the server using scp, rsync, etc.  Don't try to copy the files up to the server via Finder.
    Once all your files are transferred to the server and in the right place, make sure to chown them on the server, so they are owned by the userID you created for yourself on the server.
    As with anything this involved, make a good backup of your laptop first.
    Note I have one user that isn't too happy with the responsiveness of the periodic mobile home syncing.  She has about a decade of e-mail in her home folder, probably 50 to 100 emails per day, many with attachments.  Mobile home syncing takes a long time to check and sync this huge tree of itty-bitty files, eevn with server-side file tracking turned on.  The other users are happy.
    The nice thing about mobile home syncing is that when a user "graduates" to an age where they've earned their own laptop, you can change them from a server home user to a mobile home user, with a minimum of fuss.  Also, if you lose or break a laptop, you can add a new replacement laptop to your network, and pull-down a replica of the home folder from the server, with almost no downtime.

  • How do I merge my iTunes libraries and make them accessible from multiple Systems?

    Our family has several Macs using several versions of OSX.
    My Music collection, mostly converted from my large collection of CDs, is scattered across all the Macs and several hard drives with Systems running OSX 10.6.8, 10.8.5 and 10.9.4.
    The older Macs can not be upgraded to either Mountain Lion nor Mavericks.
    My most organised library is the latest on the Mac running Mavericks. It is tidy ALAC, and has all the correct metadata such as covers, composers, ISBNs etc. So I have started by organising those onto an external 1.5 Tb Hard Drive in a folder called Central iTunes Library.
    I intend to then go through the Libraries on the other hard drives and systems and add them to this central external collection.
    1. Will I be able to open the Central Library (created in iTunes 11.2.2) on the older Macs and Systems directly, by plugging in the hard drive?
    2. Is there a better way than reopening the files from the other Systems and Hard Drives and importing them all over again into the Central Library?
         eg Drag and Drop or File > New or a Dedicated Utility for the purpose
    3. Is sharing from my Mac, the only way to let everyone access the library?
    4. Will the other Macs be able to add to the Central Library once it is shared from my Mac?
    5. How do we manage our various iPhones, iPods and iPads with one central Library?
    6. Are there any hazards to watch out for?
    7. What is the best way to have a duplicated backup of the library?
    Thanks,
    Peter

    The concept of a central library sounds great (in principle), but unless you can all follow the same rules about handling playlist/ folder/ genre naming it can get into a mess. Are you sure you want to see all of your son's & wife's music when setting up iOS syncing? I also suspect your son & wife may have a different opinion about accessing all your music (with it's larger ALAC file size) - they may be happier not sifting through all your tracks to find the ones they like for use on iOS?
    The store authorizes to the Mac not the library - so as you move around on each Mac & use your AppleID to purchase that Mac will get tied to that AppleID. That would be fine accept iTunes has a 90 day limit on changing the Apple ID on a computer. You will have to wait 3 months to switch to using another Apple ID to download music & apps on that device - that also affects apps that sync from iOS for backups.
    Personally I think that users need their own Mac with their own library (& each Mac needs to be backed up), especially if they have their own iOS device that needs syncing to a Mac. Home Sharing is ok for moving files that you want to hear from another library - but it can be bad when a client is on wifi.
    iTunes is designed to be a single user who can share over the network - it isn't intended to be one large bucket for every family member to store media, the Apple ID issue makes this pretty clear to me.
    Your flaky wifi issue sounds like a reason not to rely on anything that requires networking to work too.
    You are correct to worry about the library versions, eventually an iTunes update will alter the library format. Only machines that have that version can open the library - this happened from iTunes 10.7 to iTunes 11.
    See how many 'old libraries' you have in the Music/iTunes/Previous iTunes Libraries/ folder - that indicates how many times iTunes has backed up & upgraded the library. Is that more than expected? Major iTunes versions will need to be performed at the same time to keep it all working with the 'central music library'.
    You may be tempted to access one iTunes library over file sharing on multiple Macs. This can cause problems when one Mac updates something (placing a file lock on the library file). It's hit or miss whether the other Macs can read & write to the library.
    PJRS seems to be using a networked iTunes library - I can't understand how it works with iTunes from Tiger to 10.9? What version of iTunes is used PJRS?

  • How to organize apps into folders and make them stick in iphone 3gs?

    Four hours down the drain! Darn, I decided to finally learn how to organize my apps into folders and do it right. Instead I spent four hours and must have got it wrong.
    I opened iTunes on my MacBook with my iPhone attached. Then clicked on the iPhone in the left side list of my iTunes. Then clicked on apps which brought up a nice page with all my iPhone apps listed in one window on the left and all the pages of the apps that are on my iPhone in the window on the right. So far this is what I think the User Manual and Help said to do.
    At that point I created new folders by dragging one app over another. For example, I would find a photography app and drag it onto another photography app. That automatically created a folder with the name photography. Just what I wanted. I then looked for more photography apps and dragged them to the folder.
    This is not too easy because I had eight pages of apps. At first, I would grab an app on a page and drag it to where I knew the corresponding folder would be and put it into the folder.
    Later I found another way was to use the list of my apps on the right to put them in apps.
    In the end, from what appeared on the screen, it seemed to me that most of my apps were in folders and the folders were either on page one, two, or three. At that point I thought that I should sync the MacBook with the iPhone, I believe, and did so.
    When the sync was finished I took the iPhone off the computer and looked at it. NONE of the folders I created, nor the organization into folders of the apps were on my iPhone!
    Obviously, I did something wrong since the same mess was on the iPhone as before, with apps all over the place and impossible to locate without taking too much time. This after four hours of work looking at a 13 in. laptop screen!
    What I hope is that someone smarter than me will look at what I did and tell me where I went wrong.
    I want the apps on the iPhone to be organized into logical folders so it is easier to find them. Something along the lines of a good database, you know?
    Thank you for reading to the end of this question,

    OK, I spent another afternoon doing the job started yesterday. Last night (could not sleep, so might as well think) I got to thinking that I really must have missed a step or something because all my work was done on the Mac and I did not recall any time when I transferred the new setup with folders to the iPhone.
    Sure enough, when I tried it today I did find that missing step. When looking at the Home Page of the iPhone or any page being worked on, in the lower right hand corner two buttons say
    SYNC APPLY
    I do not recall using the APPLY button on the first day trying this, but I used it this time.
    After making changes, I hit APPLY and the computer began to sync with the iPhone.
    This time, although there is nothing telling the user what is going on, the sync actually makes the iPhone pages to look exactly like the pages created on the Mac.
    Too bad the instructions and help did not say to do things in this way, which is the only correct way, as far as I can tell.
    I have about 155 apps on the iPhone, making the job extra lengthy. However, I never could do it on the iPhone’s tiny screen, even though it is possible, so this was good - working on the larger screen of the MacBook.
    There are also some (undocumented?) tricks in using the MacBook for this task. For example, it is possible to create a folder and then, using the list of all apps on the iPhone that is on the left side of screen, open the folder, click on the check box next to any app you want to put in the folder and it will jump right in!
    If the check box already has a check mark, just click the box to remove it, click again to put the check mark in the box and voila the app takes off for the folder. This also works to just put apps onto a certain page, if you want to do that, but dragging apps around sometimes works better.
    I hope it will not be necessary to do this again because of the time involved, and he need for quite a bit of thinking on how to move the apps and folders around to get everything just where you want it on the iPhone. The work reminded me of an old kids game that has a small square case with, I guess eleven movable numbers, that are all mixed up, and one space that is not filled with a number. You can move the little squares with the numbers around inside the case to try to line the numbers up in order from 1-11 and do it faster than anybody else.
    Well, unfortunately lining up all my apps was like that because each page of the iPhone only holds 16 folders or apps and each folder is limited to 12 apps. Starting with 155 apps it takes too much mouse maneuvering to make the process easy.
    Finally, the automatic folder names are very broad, as in MUSIC, LIFESTYLE, SPORTS and such, so I often just deleted the given categories and put my in my own. Also, some day I may break down the folders more because twelve apps in one folder means the apps are still pretty much out of view.
    I wrote this in case anyone else finds it and has the same irksome product. If I just reinvented the wheel, please do not tell me now.

  • Getting values from a table and concatenate them

    Hi All,
    I think somebody out there should be able to help me.
    I have a list of contract numbers the user has to type in.
    I've created a table where user can add as many rows as needed. Each row is a contract number.
    Once completed, I have to concatenate all of the contract numbers, separated with commas, so that I can send them to a floating field within a text box.
    It should look like this.
    .....1234, 2345, 3456 and 5678 (assuming these four values were keyed in by the user in the table form)
    Anybody can help me explaining how to concatenate the values and put them into the floating field?
    Thanks in advance.
    Rafael

    You can concatinate them easily but getting them into a floating field on the same form will be an issue. The floating field can only be filled when th eform is rendered and data is placed on the form. Floating fields are not interactive...so after the data load they are turned into text....they are not even fields anymore.

  • How can I merge a few projects (not events)and make them 1 long movie?

    I made a whole movie in separated parts- each saved as a project and now i want to merge them. After i combine them into one long project i will need to finalize the edit.
    What is the best way to do that??
    now it is:
    first part-  saved as project 1
    second part-saved as  project 2
    ...-...etc
    I tried to copy all clips and effects from one project and paste them in the next one  but the music timelines get mixed...some of the titles marks disappear and the i movie crashed and quited a few times even though i did it in small portions of about 15 seconds each time ...

    Unfortunately no, in order to do this: SMALL ADJUSTMENTS TO BE DONE IN THE SECOND PART (such as changing the lenth or type of a transition- these are changes that are hard to predict before i see all parts of the movie one after the other)
    You'll have to work back and forth between the Part 2 original project before it gets exported. iMovie doesn't let you combine projects together in an editable, mix and match kind of way. That's one reason it's so inexpensive as compared to a program like Final Cut Pro X which has some ability to combine projects in an editable format. But it's expensive and has a steep learning curve, most likely not an option for many. So it's an unfortunate limit you have bumped up against.

  • It is possible to get data from Excel file and put them in BusinessObject Entreprise?

    Hi everybody,
    How i can get the information (data table) from a excel file?
    I just want to open a file excel in BusinessObject Entreprise XI. It is possible?
    Thanks

    What is BI launch pad?
    BI platform includes BI launch pad, a web application that acts as a window to business information
    about your company. In BI launch pad, you can perform the following tasks:
    • Access Crystal reports, Web Intelligence documents, and other objects and organize them to suit
    your needs
    • View information in a web browser, export it to other business applications (such as Microsoft Excel
    and SAP StreamWork), and save it to a specified location
    9 2012-03-14
    Getting Started
    • Use analytic tools to explore the business information in detail
    The features of BI launch pad vary by content type, and various applications are available in BI launch
    pad, if you have the appropriate licenses. For information about the features in your BI platform
    deployment, contact your system administrator.
    plz download this file and u can get you answer
    http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CCMQFjAA&url=http%3A%2F%2Fhelp.sap.…

  • FILES: how do I get rid of EXEC status and set them to open with "none"?

    I dropped my laptop and damaged the drive. My computer forensic friend salvaged specific files.
    Transfered to a FAT32 drive and then copied to Mac.
    Most of files are fine with the exception of some setings files that showed up as Unix executables. The few original files that I have to compare them to, show "Document" as the file "Kind" and the "open with" shows "none" in Get Info
    When I look at the contents of the files they look fine. How do I get rid of the EXEC status and set them to open with "none"?
    Any help would be greatly appreciated.
    These are settings files for a set of .wav samples for an AU drum plug-in.

    If you have xcode installed, you might want to find out what the type and creator code for these files should be. Since the files have visited a FAT32 file sytem, you will have lost all resource forks as well as type and creator HFS+ meta data.
    So assuming you do have xcode, create a new AU drum plug-in file then in the terminal:
    <pre style="padding-left: .75ex; padding-top: .25em; padding-bottom: .25em; margin-top: .5em; margin-bottom: .5em; margin-left: 1ex; max-width: 80ex; overflow: auto; font-size: 10px; font-family: Monaco, 'Courier New', Courier, monospace; color: #444; background: #eee; line-height: normal">/Developer/Tools/GetFileInfo newfile</pre>
    Then use:
    <pre style="padding-left: .75ex; padding-top: .25em; padding-bottom: .25em; margin-top: .5em; margin-bottom: .5em; margin-left: 1ex; max-width: 80ex; overflow: auto; font-size: 10px; font-family: Monaco, 'Courier New', Courier, monospace; color: #444; background: #eee; line-height: normal">/Developer/Tools/SetFile -t '(insert type)' -c '(insert creator)' oldfile</pre>
    If there's a lot of these you might automate the process using the find command.
    Cole

  • Can I develop an iOS app that can download multiple free iBooks that I publish and make them available within the iBooks app?

    Is it possible for a self-developed iOS app to download iBooks from our server and make the books available to the iBooks app?
    My organization is evaluating publishing some free training manuals / textbooks as iBooks made with Apple's "iBooks Author" software. We don't necessarily want to use the iTunes Store for distribution because of the semi-sensitive nature of the content. To distribute the books to users with iPads, we've thought of using MDM software, a webpage, or an iOS app. The reasoning behind an iOS app is that the app would be a "download manager", making it much easier for a user to download all 42 books all at once. A user would install our "free training manual download manager" iOS app and use it to authenticate to a our server app that would serve the books, the end result being the books available via the iBooks app.
    Thanks,
    Ted

    Hi Kappy,
    Actually Apple lets self-publishers distribute iBooks outside of the iTunes Store, as long as the iBooks are free (no cost to user).
    What I'm wondering is if it's possible for a custom iOS app to side-load iBooks so that they're available to a user within the iBooks app.
    If not, we'll either post the iBooks for download from our website or we'll use MDM software to push the iBooks to MDM-enrolled iPads.
    Ted

Maybe you are looking for

  • After upgrade mail won't work or open at all

    Mail starts to open and says it is upgrading, then stops and fails. i need help quick. Please! Thanks ELLEN Rochester, NY MacbookPro (2009) 17" iOS YOSEMITE: 10.10.3 iphone 6+  iOS 8.3 ipad2 (os 8.1) AppleTV shuffle ipod

  • I have lost most of my purchased music!! HELP!

    I open up my iTunes on my laptop (windows 7), then plug in my iPod. (My iPod is only 2nd generation, I need to get a new one!! : P) It starts to sync automatically. I think - 'ok dont worry, just carry on!' When it has finished syncing/charging, i go

  • CachedLogonsCount On Domain Controllers

    Guys, This maybe a simple one, but I haven't been able to find any documentation with regards to it: Is there any issue in setting the CachedLogonsCount value on a domain controller to 0?  We'd like to do this to satisfy security audits.  I assume th

  • What's the difference between using java directly in JSP and java bean

    What is the difference if I use java code directly in JSP or use java bean in JSP? Which class to use for receiving the passed parameter from html or java script? Any difference for java code and java bean in the way receiving the passed data? How ca

  • Once again the Updater Fails to update on my Mac

    I went through this on the last update and finally was able to download the entire revised app. I continue to get a message that states that the app has been modified and can't be updated. I have updated reader for  years with no problems until the l