Get data at co11n screen exit

I added a tab with enhancement CONFPP07 for co11n screen and i added a field here. I put break-point for my PBO and PAI. I get into both PBO and PAI but there are no global or local variables are filled here. How can i see the values on the screen? For example there is aufnr field. How can i get that aufnr value?

please see the thread below. It's related to this problem also. If i solve one of them, im sure i will solve the other one too..
[Re: Updating my append structure in MVKE at MM02 screen|Re: Updating my append structure in MVKE at MM02 screen]
Edited by: aydnbk on Oct 7, 2011 8:07 AM

Similar Messages

CO11N-Screen Exit

Hi Gurus,
I have a problem. I need to add a new button at the very end of the CO11N screen for some reasons.
Im using CONFPP07 exit.
I m using SAPLCORU_S 5900 screen. I created project, add a button to the layout of the screen and activated them
however, it doesnt seem in my co11n screen. What may be the reason? Thanks in advance....
Edited by: OSMANBIYIK on May 5, 2011 8:31 AM

Hi,
For getting more than 7 fields in OPK0, you need to activate the Switch framework - "/SAPMP/GENERAL". You can do the same using SFW1 transaction.
PLEASE NOTE :
SWF administration for maintenance views, view variants and customizing
tables.
In maintenance views, view variants and customizing tables of the core,
additional fields can exist in an IS solution that must remain switched
off as long as the IS is not active.
In the dictionary it should be possible to assign fields of maintenance
views, view variants and customizing tables to a switch. If the switch
is in off-state, the field is hidden from the maintenance dialog.
Note: This switch should only be maintained for customizing objects for
which a maintenance dialog for maintaining customizing data is
generated.
Regards,
Harish
Edited by: harishkumar.d on May 5, 2011 2:12 PM

Screen-Exit MM01/MM02/MM03 - Problems when I try to retrieve the data saved

Hi guys,
I created a Screen-Exit in the Accounting View of MM01/MM02/MM03 because I need to insert data into the fields of an Append Structure of the table MBEW, that I created.
So, I can insert the data through an User-Exit. I Export to the Memory the data from my Screen-Exit and I modify the Fields content of MBEW inside of this User-Exit.
I need to select these data and show it, because the selection is not automatic. I don't know if it could be automatic.
Inside of the Screen-Exit there are some tables available, but they are empty and I can't retrieve the data because I don't have
the Material Number nor other data of MBEW. When I run MM02, for example, the User-Exit is not started and so
I can't export the data to the Memory and after that to select the data. This User-Exit is only started when I save the data...
I found not any BADI too...
Please, could someone help me?? How I could solve this question?
Thanks a lot!
Regards,
Marcos Fernando Dotta

Hello Marcos,
Please see OSS note 44410 - Integrating cust. - specific fields in matl master.
Kind Regards,
Rae Ellen Woytowiez
Link: [https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=44410]

How can i add field to screen exit ?

ver 4.7
trans. me21n
add field in screen exit .
i implement screen exit MM06E005->SAPMM06E->0111
in the layout i try to add field by pressing
button in the toolbar ( dictionary field window ) ,
but when i press "save" in me21n ,
i get message "No data changed".
i choose in the dialog window
field from structure "ci_ekpodb" , field that i already
been add .
thanks .

Hi
You have to implement the exit to import/export the data into/from screen-exit:
EXIT_SAPMM06E_016 and EXIT_SAPMM06E_018
Max

Screen Exit for ME23n.

Hi Gurus,
I hace created a project in CMOD for adding a tab in the header data.
The screen exit used is the following:
SAPMM06E 0101 CUSTSCR1 SAPLXM06 0101
can anyone guide me as to which runtime structure has the same when i am doin ME22N.
Best Regards,
Navin Fernandes.

Hi, NAVIN
You can find these fields in Structure EKKO, I_EKKO
Thanks and Regards,
Faisal

Screen exit for co11n and problems in writting the PBO and PAI Logic ?

Hi People,
I am developing a screen exit for transaction co11n. I have found the exit ( CONFPP07 ) ... I created a project and have
assigned this exit and activated the project. I have created a field named SHIFT on clicking this field i have to give three
possible values (a,b,c ) and i have to store these values in some table .......... now my problem is in which include i
have to write PBO and PAI logic ... should i have to write pbo logic in the include provided in the exit
EXIT_SAPLCORU_S_100 and PAI in EXIT_SAPLCORU_S_101.......or .........Can any tel me what should i have to do to
meet the requirements... and in which structure i have to add this field so that it gets stored in some table.
Thanks in Advance.

Hi,
Use the includes in the program SAPLXCOF given in CONFPP07 Exit.
You may use include zxcofzzz ( for Subprograms and Modules )
by creating it upon double click.
Regards,
Wajid Hussain P.

Lightroom requires me to sign in 3 or 4 times whenever I use it. I get confronted with a screen telling my trial has 00 days left and I must license or sign in to continue. If I simply ignore any of these repeated requests, Lightroom immediately exits

Lightroom requires me to sign in 3 or 4 times whenever I use it.
I get confronted with a screen telling my trial has 00 days left and I must license or sign in to continue.
If I simply ignore any of these repeated requests, Lightroom immediately exits
.This happens whether or not I sign in to Creative Cloud before attempting to launch Lightroom.
My subscription is in good standing and Lightroom/ Photoshop are up to date. There are no earlier versions installed.

From what you report it appears that you have a trial version of Lightroom 5 perpetual license version installed. Subscribing to the Creative Cloud package PS CC and Lightroom will not activate this version. Try the following.
1. Uninstall Lightroom using the OS system normal uninstall process. This will not affect your existing Catalog and user files and but will just remove the Lightroom Application.
2. Reboot your computer.
3. Open the Adobe Creative Cloud Application Manager and it should give you the option to download the latest Lightroom 5 install package. Proceed to download and install this version and it should be activated automatically, no requirement to enter any license key like the Perpetual License version. It will automatically link to your existing Catalog files etc.

Screen exit for co11n ?

Hi People,
I got a requirement for developing a screen exit for transaction co11n ..... I want to know what are all the screen exit
available for this transaction ( I have the progrqam that shows the list of ext available for the transaction, but how to find
out thescreen exit in this list ) and the steps to find out the screen exit and the procedure to implement it. ?
Thanks in advance.

Hi,
Use the following link to find the sceen exit.
http://www.sap-basis-abap.com/abap/how-to-find-a-screen-exit-in-a-given-sap-standard-t-code.htm
1. Go to tocode smod.
2. Give the exit name in enhancement
3. You will get function exits, screen area and menu exits for
this enhancement
4. Go to the Screen area
Regards
Guru

HT3224 I am new to Mac and started transferring data from my PC to my new Macbook Pro. Connection was lost once I started and now my Pro is stuck on the 'Transferring Information' screen. How do I get out of this screen to attempt the connection again?

II am new to Mac and was trying to transfer data from my PC to my new Macbook Pro. The connection was lost however and now my Pro is stuck on the 'Transferring you nformation' screen. How do I get out of this screen so I can attempt the connection again? Is it safe to force shut down of my Mac and will it still prompt me through all the setup process again?

Welcome to Apple Support Communities
If your Mac and PC are connected by Ethernet, unplug and plug that cable again. If not, you have to turn off the MacBook by holding the Power button.
In the next startup, try to transfer your files again. It's important not to interrupt the transfer process, because in most cases, you will stop it and you won't be able to resume it

My new iMac had the old data transferred in-store but now it won't accept the password on the first screen. How can I reset this? I can't get past the first screen as a result.

I cannot get past the initial screen on my new iMac. Data was transferred from my old computer so when I turned it on It automatically had my name in the window and asked for the password, but none of my old passwords seem to be accepted. How can I fix this?? It's a new IMac with osx.

Which password isn't working? The one to access the iPad or the one to get your hotmail?
If hot mail, you go into the settings, mail, contacts and calendars and edit your hot mail account. Of if it won't edit, delete it off the iPad, then re-add it with the new password.

Passing data to table control in screen exit - IW33 (IWO000018)

Hi Experts,
I am stuck in middle of a screen exit. Request your kind help on this.
Requirement scenario: -
To add an additional tab named "Estimated Costs" in transaction IW31, IW32, IW33. This tab will include a table control with 4 columns: - Operation, operation short text, Estimated cost and Currency. Columns Operation and Operation short text should show all the operations from tab 'Operations' (that can be fetched from table AFVC based on Routing number of operation as fetched from view CAUFV).
Issue: -
Table control has 4 columns, 2 are non-editable,2 are editable. Data in the non-editable fields is passed correctly, whereas in I/O editable fields, entered data is not retained everytime PBO is called. I have modified the internal table in the PAI event.
Pointers in this direction are highly appreciated.
Best Regards,
Shreya
Edited by: shreya tagra on Apr 29, 2010 5:48 AM

I suppose it has to do with the code you have written. Please post a relavant snippet of your flow logic.
regards,
Aabhas

P.O change if i change only screen exit field the data is not saving

Hi ,
In the purchase order header custom tab i am added a screen exit field .In the purchase order creation mode the screen exit field is saving.But in the change mode if i am changing only the screen exit field then it is showing as 'no data to save' and not saving .But at the same time if i am changing some standard field with the screen exit field then both the field is saving.
I have to activate any field to save the screen exit field.Please let me know any exit to be activated for saving the data.
With Regards,
Ambrose

Hi
Pls keep a break-point in the PAI of Screen exit and check, whether it stops in change mode
Regards
Madhan D

Screen Exit for adding custom fields in Additional Data tab in ME21N

I need a screen exit or whatever other method for adding custom fields to the additional data tab at header level.
I also need a similar exit for adding a filed at item level.
Thanks in advance
Martin

Hello,
1st find badi or exit and then create screen ...and assign the screen group and screen no for that implementation....some steps i can give u i did with SPRO tcode....
please check it for VA02
SPRO u2013 SAP Reference IMG --- Logistics General --- Basic partner u2013 customers -- Control u2013 Adaption of customers own masters data element u2013 prepare modification of customer free enhancement of customer master record
1)Screen group                                  description
        zs                                           creating badi      --- (save)
       click on (label tab pages) u2013 new entries
       number u2013 10 , function code u2013 zs10 , description u2013 func ---(save) u2013(back)
2)select (FM_CUSTOMER_ADD) u2013 copy
     Implementation name u2013 ZAS
     (desc u2013 impl for cust) u2013 (save)
    interfaceu2014(check_add_on_active) double click on it
3)the above screen appear -- write the code in it u2013 (save) --- (activate) u2013 (back) u2013 (save)
     -- (activate) u2013 (back)
   Business adds in customer sub screens
4)select (FM_CUSTOMER_ADD) u2013 copy
     Implementation name u2013 ZAS1
     (description -- cust) u2013 in attribute u2013 (give screen group name)
5)go to interfaces (GET_TAXI_SCREEN) double click on it
   (save) --- (activate)
6)(SAVE) --
    Goto SE38 -- CREATE PROGRAM WITH NAME (ZQW) type module pool
     Goto SE51 -- Prog : ZQW
       Screen : 200 (Create)
      Goto layout u2013 design the screen
7)save u2013 activate
   then goto transaction : va02
For User Exit's
goto to tcode->status->program name->double click on that,
then goto to-> attribute take the package name and
Goto SMOD tcode ->Utilities->give the package name and F8
then a list of exits will display for that tcode as well as that package.
u can check the table MODSAP
u can check the table MODACT
For BADI's,
1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
2)Goto to tcode->status->program name->double click on that program will display's
then press crtl+F then cl_exithandler
Thank u ,
santhosh

How can we get date period in out put screen as a header (PLS Urgent)

Hi frdz,
In ad hoc reports client want to get date field in out put screen as per selection screen date priod.
Kindly let me know how can we get the same.
EX: My report selection peiod is 01.01.2006 to 31.12.2006
The same above date I want to get in out field screen header.
Thanks,
$ Lakshmi
Message was edited by:
Lakshmi

see if this link helps http://support.apple.com/kb/ht1212
you will probably have to restore the iphone as new.

Screen Exit for VA01/02 Additional data tab B

Hi
i am working on screen exit for Additional Data Tab B to add custom fields.I have included the fields in VBAK table using append structure(is there a way to include fields using Include Structure?).
Also i have seen in many threads that SAPMV45A program and 8309 is the screen number to do the changes.
I am new to this Screen exits can someone tell me how to add these fields in that tab?i dont understand what to do from here.
give me step by step process or any link to do this.

hi
but does it ask me for ACCESSKEY?
i must not change the standard thing. i need to implement in Exits only.i have seen in SAPMV45A there are 2 exits exit_**_002 and 003 which can be used for PBO and PAI.
but i am confused on how to bring the fields into ADDITIONAL DATA TAB B without changing standard directly?

Get data at co11n screen exit

Similar Messages

Maybe you are looking for