Screen-Exit MM01/MM02/MM03 - Problems when I try to retrieve the data saved
Hi guys,
I created a Screen-Exit in the Accounting View of MM01/MM02/MM03 because I need to insert data into the fields of an Append Structure of the table MBEW, that I created.
So, I can insert the data through an User-Exit. I Export to the Memory the data from my Screen-Exit and I modify the Fields content of MBEW inside of this User-Exit.
I need to select these data and show it, because the selection is not automatic. I don't know if it could be automatic.
Inside of the Screen-Exit there are some tables available, but they are empty and I can't retrieve the data because I don't have
the Material Number nor other data of MBEW. When I run MM02, for example, the User-Exit is not started and so
I can't export the data to the Memory and after that to select the data. This User-Exit is only started when I save the data...
I found not any BADI too...
Please, could someone help me?? How I could solve this question?
Thanks a lot!
Regards,
Marcos Fernando Dotta
Hello Marcos,
Please see OSS note 44410 - Integrating cust. - specific fields in matl master.
Kind Regards,
Rae Ellen Woytowiez
Link: [https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=44410]
Similar Messages
-
I create a project w/iMovie and I have two problems: When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen. I'm uising photos in my project, not video. Help!
You can split a project in two by doing this.
1) Go to the Project Library View.
2) Select your project, and click FILE/DUPLICATE PROJECT. Give it a name like "your project name - part 1".
3) Do this again. This time name it "your project name - part 2"
4) Open Part 1 for editing. Delete everything in the second half.
5) Open Part 1 for editing. Delete everything in the first half of the project.
At the end you should have your original project, plus the same project in two parts. -
It's a Magic Mouse question. I have set this up in Preferences by ticking Swipe between pages with one finger and also Swipe between full-screen apps with two fingers, however when I try to do the latter, the 2 finger swipe will take me from the app that I am on to the dashboard only and not to my other open apps.
I also find that Smart zoom only works with some apps, for instance not with Word docs or email.
How can I correct this please?Just figured out it also does not work with the Mail app.
-
I'm doing a scan around a line by sampling data 360 degrees for every value of z(z is the position on the line). So, that mean I have a double for-loop where I collect the data. The problem comes when I try to plot the data. How should I do?
Jonas,
I think what you want is a 3D plot of a cylinder. I have attached an example using a parametric 3D plot.
You will probably want to duplicate the points for the first theta value to close the cylinder. I'm not sure what properties of the graph can be manipulated to make it easier to see.
Bruce
Bruce Ammons
Ammons Engineering
Attachments:
Cylinder_Plot_3D.vi 76 KB -
My OS is Win200 professional.
I'm running a data acquisition program. I'd got this main dialog which the user selects the input channel.
The child dialog should show the graph.
I'd initialise all the NI_DAQ configuration in the main dialog class. After acquiring the data, I send the matrix to the child window for it to plot. There is no compilation error.
However when I try to plot the data, Windows complained about Acess violation and Memory cannot be accessed error.
I'd attached my program below.
Attachments:
DataAcqDlg.cpp 10 KB
Ch1Dlg.cpp 7 KBWynn:
I believe this problem is occurring because you are using the index operator (brackets "[","]") instead of the functional call operator (parentheses "(",")") in your code to access the matrix.
SigCh1Vect[i] = SigCh1Max[1,i];
The index operator is not defined for the matrix, because the C++ language does not allow a two-argument overload of this operator. Instead you have to use the function call operator for matrices and remember to use the index operator for vectors.
I believe that what is happening is that the compiler is using one of the defined cast operators on the matrix (operator DataType) to convert the symbol "SigCh1Max" into a double pointer. It then interprets the bracket as it would any array index operation. So the compile
r effectively sees:
SigCh1Vect[i] = *(((Real64*)SigCh1Max) + (1,i));
In this case, I believe the comma operator is defined to return the rightmost operand, or "i". Changing your code to
SigCh1Vect[i] = SigCh1Max(1,i);
should fix the problem. Please let me know if any issues exist after this fix.
In the next release of Measurement Studio, I will recommend that the index operator be defined on the matrix classes, even if it simply throws an exception. The existence of this operator will prevent problems like this from showing up.
Hope this helps,
-- Chris W.
Measurement Studio R&D
National Instruments -
I downladed a game then i bought some gold on the game using a credit card. Now when I try to retrieve the gold it says I have to verify then download it. It will not let me. Any suggestions?
I was receiving the same error message yesterday, which said There was a problem downloading "The Song Name / Album / Artist". The file seems to be corrupted. To redownload the file, choose "Check for Available Downloads" from the Store menu. The file tries to download five times before this error message appears.
I too, tried to find the file and delete it, but it was no where to be found.
So I gave up for that moment and tried again today and I was able to successfully download the file. Amazing how that works!!! -
I have downloaded and installed the latest version of numbers on my mac. Everytime I save and then try to reopen that document, I receive a message telling me that I need a new version of numbers. Also, when I try to sort the date column, it sorts out of order. The last version sorted fine.
Welcome to Apple Support Communities
When you install the new iWork version, the old iWork version is kept, so it looks like you are opening your old version.
To fix this, open a Finder window, choose Applications in the sidebar and drag the new Numbers version to the Dock, so you can access to it quickly. Open all documents from this version. I don't recommend you to delete the old Numbers version in case you need it.
Respecting to the second question, you will get better answers in the Numbers for OS X forum -
Problem when I try to download the IOS4 for my iPod Touch 2G
Hello guys!
I am from Bella Vista, Buenos Aires, Argentina and I have the following problem:
I have an iPod Touch 2G, I installed the lastestversion of iTunes and every time i connect my device to my pc via usb, iTunes opens and a window apears telling to me that I can update it to IOS 4.0. I clic on Only Download (I want to download the new firmware and update later).
The download starts correctly, but in the middle of the download a error message appears. The window says that a problem occurred with the download, try again later. Error number: 9006 (Unknown).
Questions:
a)- if this error occurs in the middle of the download... Why does not iTunes prompt me an option to continue the current download when I try to do it the next time? (I have to start a new download again when I try to download the firmware again. The firmware size is 300 mb. The error window only shows me an OK button and the transfer is interrupted. When I try to download the firmware again, the download should continue from the part where was interrupted, no start all again. Apple should fix this issue). I have to tell you that I tried several times downloading the firmware and I always got this error window and I really HATE it. Please, gime me a solution for my problem and try to fix the issue that I showed above. (When I'm downloading a firmware version from iTunes and the download is interrupted by a "X" problem or error, when I try to download it again, the download should continue from the part where it was interrupted, no start all again). I will be hoping for a good solution. Thanks and I have to tell you that you manufacture very amazing products. Ipod Touch, one of my favourite Apple's products. My big dream: I want to have an iPhone 4Well!
We have to protest for it.
If an error occurs with the download and we want to try again, the download MUST continue from the part where was interrupted, no start all again. We have to protest for it. Please, Apple Inc, try to fix it. It's very easy to do. If I am downloading a firmware version from iTunes and an error occurs with the download , you should put a button that reads "Continue the download from the interrupted part", no only a "OK" button that finishes the download and I have to start all again when I want to retry. Solve it, please. -
I have images in iPhoto from an older digital camera which did not record the date and time. In iPhoto, with an event selected, I have tried to adjust the date and time by choosing Photo. When I adjust the date and check Modify original files, it makes the date much earlier--in centuries. I now have an event from August 2003 (the date I entered) which reads June 2, 1251 under the event! When I attempt to correct it, it goes back further in time. What am I doing wrong?
(I use iPhoto only to import from my iPhone; I organize all my images, including thousands of RAW files, in folders on a big external drive.)
Why are you using iPhoto at all? use image capture or drag and drop the photos
The problem is that the files I am copying are getting stripped of the EXIF metadata
eliminating iPhoto from your work flow will eliminate one oppertunity to have this happen For photos in iPhoto it is best to export them rather than drag an drop them - this assures your EXIF and IPTC data is correct and uptodate
Why would I be able, over many years, to retain EXIF metadata in photos imported from an iPhone--then one day find that the same workflow strips such photos of EXIF data?
Because exporting is the supported way to "export" photos - I never drag and drop photos out of iPhoto and I never use thrid party programs on the photos in the iPhoto library - try exporting as suggested above and see if that is the solution
LN -
I open a calendar on a vendor website and when i try to change the date Firefox crashes.
I use a vendor's website to change retails on products that I sell. The default date for the changes is the next day. I can make the changes happen on a future date. When I open the calendar to change the date, Firefox immediately crashes when I click on a future date.
i have had a similar issue that u r describing with my ipad, but wirh a slight variation. my calendar is working fone, but if i try to use the search function, my calendar completely freezes, and the only way i have been able to resolve this is to go into my settinsgs tab, then go to set the date, and set the date to a prior date. for example, i was stuck on jan 7th 2014, and when i changed the date to a date in 2011, the calendar unfroze and allowed me to jump to any date i wanted. i was then able to go into the settings tab and enter and set my ipad to the correct date. there seems to be a defect on the ios i am using, 4.xx, with using the search function in the upper right hand corner. the only way to prevent this is to refrain from using the search function within the calendar.
-
"Primitive Type Returned", when I try to configure the data return type.
I am basically following this tutorial, Getting started with ColdFusion and Flash Builder 4 beta, but instead of using the database provided, I am using SQL Server 2008. I am now stuck on the part titled, "Configuring the data return type". In step 5 of this section, I submit my credentials and then I get a popup titled:
Primitive Type Returned
The operation returned a response of the type "Object".
You may either update server code to fix the returned data or Click OK to set "Object" as the return type of this operation.
I am not sure if "server code" would be my database and/or the Coldfusion code that was provided in this tutorial. I am thinking that its the former, however I am new to both technologies. Would anyone know why FlashBuilder will not strong type this data for me?Hi,
Thanks for your feedback!
The server code here means the ColdFusion code provided in the tutorial.
The "Configure return type" step is performed to change the return type of the function.
If you notice after importing the CFC in the Flash Builder the return type of getAllData was Object but with this step you are trying to change it to a Strong Type.
So context click on the getAllData function,select 'Configure return type', enter "EmployeeSalesData" click NEXT , enter valid RDS credentials in the security dialog and click FINISH.
This should have ideally set your return type to "EmployeeSalesData"(Strong type).
Also if you are extremely new to this i suggest you to pick up a pre-release build of Flash Builder which has a COOL feature which can help you get started pretty fast and simplify most of these workflows.
To avail for the pre-release build please send a mail to [email protected]
Hope this helps!
Thanks,
Balaji
http://balajisridhar.wordpress.com -
Database connection problem when i try store the values in JTable
Hi Sir,
I have a database connection problem when i try to store the data's in a JTable.I think the problem is with in the database connection.I have used 3 vectors here.The database which i have used is
Access.Where the program is compiling well.But when i run it only the first column heading is printed and error message showing that
"Invalid Cursor State".I need to solve this problem.pls. do help me.
I will provide u with the code.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
import java.util.*;
import java.sql.*;
public class DataBaseVector extends JPanel
//Container contentPane=getContentPane();
JScrollBar jsb = new JScrollBar(JScrollBar.HORIZONTAL);
JScrollBar jsb1 = new JScrollBar(JScrollBar.VERTICAL);
Image i1;
String url="jdbc:odbc:Ananth";
Vector col=new Vector();
Vector rows=new Vector();
Vector rdata=new Vector();
Connection conn;
public DataBaseVector()
//super("JTable With ScrollBars");
this.setLayout(new BorderLayout());
UIManager.put("ScrollBar.track",Color.red);
UIManager.put("ScrollBar.thumb",Color.blue);
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
conn=DriverManager.getConnection(url); // Is there any problem here?
Statement st=conn.createStatement();
ResultSet rs=st.executeQuery("Select * from AccountMaster");
// rs is the result set obtained
ResultSetMetaData rsmd=rs.getMetaData();
int cols=rsmd.getColumnCount();
for(int i=1;i<=cols;i++)
col.addElement(rsmd.getColumnName(i));
rdata.addElement(rs.getString(i));
rows.addElement(rdata);
}catch(Exception e)
System.out.println("The Error Message was:"+e.getMessage());
JTable jt=new JTable(rows,col);
int v=ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED;
int h=ScrollPaneConstants.HORIZONTAL_SCROLLBAR_AS_NEEDED;
JScrollPane jsp=new JScrollPane(jt,v,h);
this.add(jsp,BorderLayout.CENTER);
this.add(jsb, BorderLayout.SOUTH);
this.add(jsb1, BorderLayout.EAST);
public static void main(String args[])
JFrame jf=new JFrame();
JPanel frame=new DataBaseVector();
jf.getContentPane().add(frame);
jf.setSize(800,600);
jf.setVisible(true);
Thanx,
m.ananthuThe problem is ResultSet.next() is not called.
Try this and modify the table creation as you need.
ResultSetMetaData rsmd=rs.getMetaData();
int cols=rsmd.getColumnCount();
while(rs.next()) {
for(int i=1;i<=cols;i++)
col.addElement(rsmd.getColumnName(i));
rdata.addElement(rs.getString(i));
rows.addElement(rdata);
Hope this helps -
Add a custom-field in the table MARC and manage it in MM01/MM02/MM03
Good day to all of you!
I have this task: To add a custom-field to the table MARC. This custom-field will be managed through the MM01/MM02/MM03 transaction as follows:
In the Basic Data 1 or Basic Data 2 the custom-field data will be added. Let's say the field is MATNR OBSOLETE.
I have searched and implemented the things in customizing: Made a copy of function group MGD1, added the field on the screen.
MY PROBLEM! How to manage it??? When the user enters MM01/MM02/MM03 and update this field, the field should be updated in MARC.
1. I am not sure that this custom-field should be on Basic Data1 or Basic Data2.They want it at plant level.
2. How to manage the data transfer from SAP Standard Program and my Custom Function Group.
PLs: Do not paste me link to sap technical site with that example, because there takes the custom fields and UPDATE a CUSTOM TABLE. I need to update MARC!
All the documentations i have read until now tell you how to add the field, ONLY the first part of the SOLUTION.
Any help, pls?
Good day and thank you!Hi Alex,
In which way you are trying to update that custom filed. Have you written any logic in EXITS/BADIS?
http://pavelgk.pbworks.com/f/6729224-Implement-Screen-Exit-for-MM01-Adding-New-Fields-in-Screen.pdf
and
Just read the OSS note mentioned earlier.
Symptom
You want to integrate customer-specific fields in material master maintenance.
Other terms
SAPLMGMM, RMDATIND, ALE, CI_MMH1, EXIT_SAPLMGMU_001
Solution
To add customer-specific fields to an existing material master table (such as MARA or MARC) , you can proceed as follows as of Release 3.0C:
1. Use an append structure to add the fields to the required table in the Dictionary (this is not a modification; for details, see the SAP document "ABAP/4 Dictionary"). In Release 3.x, the length of the field names must be the same as the standard five character fields. This is necessary because of dynamic assignments. As of Release 4.0A, the lengths of the field names can be longer than five characters. If the changes of the fields should be recorded in the change document and taken into account during ALE distribution, set the 'Change document-relevant' indicator for the corresponding data elements. For table MARA in Release 3.x, you must also enhance the database view MARU because the database changes are carried out using this view. This small modification is no longer necessary as of Release 4.0A because the database view MARU is enhanced automatically when you enhance table MARA or the include EMARA (which is the data part of table MARA).
2. Enhancing online maintenance in customized material master maintenance:
Define a subscreen with your customer-specific fields in a customer-specific function group created as a copy of the standard function group MGD1.
In Customizing, assign this subscreen to a maintenance screen using the "Copy customized material master" function. For details, see the Implementation Guide (IMG). As of Release 4.0A, program COPYMGD1 is available. You can use this program to create customer-specific function groups as required. This program is also incorporated in the Customizing function 'Configure customized material master'. Ensure that each field of the subscreen has a field statement in the flow logic, otherwise the data is not transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
If you want these fields to be subject to standard field selection, you must add new entries for them to the central field table for material master maintenance (T130F):
Application examples for standard field selection:
The field is mandatory and is to be flagged with a "?".
The field belongs exclusively to the purchasing user department. Purchasing data and MRP data are both contained on one screen. However, the MRP controller is not to see the purchasing data.
The following data is required for each field:
a) Field name (T130F-FNAME)
b) Field selection group (T130F-FGRUP)
Here, you should use a standard field group if the customer field is subject to the same field selection as the standard fields of the standard field group. If it is not, use a customer-specific field group.
You must then check and, if necessary, modify the attribute of the field group using the function "Maintain field selection for data screens" in Customizing under "Logistics Basic Data -> Material Master".
Field groups 111 through 120 that are not used in the standard system are reserved as customer-specific field groups. As of Release 3.0F, additional customer field groups are available. (For details, see the IMG).
c) Maintenance status (T130F-PSTAT)
List of the user departments that may maintain the field. You can display possible values by using the input help for the maintenance status field in the Customizing activity "Configure Material Master" when maintaining logical screens.
d) Reference (T130F-KZREF)
This indicator must be set if the field from the reference material should be proposed during creation with reference.
Note: You cannot yet use Customizing to enhance table T130F; you can use only transaction SE16 (Data Browser) or transaction SM31. Future releases will include a separate Customizing function for maintaining customer-specific fields. See Note 306966. By implementing this note you can add entries to table T130F within Customizing. This type of maintenance is possible as of Release 4.5B.
You may change the entries for standard fields only with regard to the reference data and field selection group. Changing other data for standard fields constitutes a modification. Therefore, you cannot use the Customizing function "Assign Fields to Field Groups" to change this data.
In addition, you must not add new standard fields to table T130F.
3. If you want to maintain customer-specific fields using data transfer by direct input or via ALE distribution, proceed as follows:
Add the fields to central field table T130F (see above).
Add the customer-specific fields to the data structures for the data transfer (for example, BMMH1 for the main data).
Also, add the customer-specific fields to the tables in which the incorrect data is stored during direct input. These tables have the same name as the corresponding master data table and also have the suffix _TMP.
For example: If you add customer-specific fields to table MARA, you should add the same fields to table MARA_TMP.
If you use ALE, you must also add fields to the IDoc. To process enhanced IDocs, you can use enhancement MGV00001 with customer exit EXIT_SAPLMV01_002 for creating the IDocs and customer exit EXIT_SAPLMV02_002 for posting the IDocs.
Prior to Release 3.0E, enhancing structure BMMH1 constitutes a modification. In this case, you must add the new fields tot the end of the structure before the last field (SENDE = record end indicator).
As of Release 3.0F, structure BMMH1 contains the customer include CI_MMH1, which is part of the enhancement MGA0001. Here, you must proceed as follows:
a) Add the customer-specific fields to include CI_MMH1.
The names of the fields in CI_MMH1 must be identical to those of the corresponding fields in material master tables MARA, MARC and so on.
Important: The fields must be CHAR type fields. Therefore, create CHAR type data elements whose lengths are identical to the output length of your fields in table MARA and so on. Use these data elements in include CI_MMH1, but use the field names from table MARA and so on.
b) Activate include CI_MMH1.
c) If you have not used customer structure ZMMH1 before, create it as a copy of structure BMMH1 and delete the standard fields that you do not require. You are not permitted to delete field STYPE and include CI_MMH1 when doing this. If you have already used structure ZMMH1, add include CI_MMH1 to it.
d) Activate structure ZMMH1. This also adds the customer-specific fields to ZMMH1.
Run program RMDATING. This program generates routines which are supplied to your customer-specific fields from the input file. As of Release 4.5A, you also need to activate the routines/function modules generated by program RMDATING (especially, the MAT_MOVE_BMMH1_XXXX modules). Details about this subject (especially the procedure when using customer structure ZMMH1) are described in the IMG for transferring the material data under item 'Maintain Transfer Structure'. Also, check the declaration of structure WA in program RMMMBIMC to see whether it is declared with sufficient length. If necessary, enhance the declaration (for the time being, this still constitutes a minor modification).
In addition, lengthen domain DI_DATA with CHAR 5000. As of Release 3.1H, this has already been done.
Important: When using customer-specific fields, you can use only structure ZMMH1 to transfer the data. Otherwise, after the next SAP upgrade which contains new standard fields in structure BMMH1, the input files no longer match. If you want these new standard fields to be transferred, add them after your customer-specific fields (the order of the fields in structure ZMMH1 does not need to be the same as the order of the fields in BMMH1).
If you want foreign key dependencies or fixed domain values to be checked, or another check for a customer field, this is possible up to and including Release 3.0D only by modifying the corresponding check function modules. As of Release 3.0E, you can use function exit EXIT_SAPLMGMU_001 (SAP enhancement MGA00001) for these purposes.
If you want to use engineering change management to schedule future changes for your customer-specific fields or you want to use the 'Display at Key Date' function, execute program GENERATE in addition. This program generates the necessary assignments for interpreting the change documents. With regard to engineering change management, you must read Notes 60281, 60973, and 48962.
To date, it is not possible to integrate customer-specific tables in material master maintenance without making a modification. However, you can create customer-specific development objects containing the essential additional logic. You can then integrate these development objects in your system as part of only a minor modification.
check this link. It may helps you to solve your issue.
Thanks
Sravan -
Error in adding custom fields to mm01/mm02/mm03 trx
Hello People,
To add my custom fields in the basic view tab of MM01 transaction, i have performed the following steps:-
1. Inserted the append structure in MARA table with the required fields.
2. Copied function group 'MGD1' to 'ZMGD1' and then set the layout of screen '0001' as per my requirement.
3. Then i made changes in spro as
SPRO->Logistics-General->Material Master->Configuring the material master->define structure of data screens for each screen sequence and inserted my program name( of function group 'ZMGD1') and screen number(0001) in 21(Std ind.(short) tab pages)->7(Basic Data 1)->8(sequence).
Now, if i click on SPRO option (view data screen), then i can see my fields added in basic data view...
but when i execute 'MM01/MM02/MM03' trx there my added fields do not appear....
Does anyone know where i am missing out??
Please suggest...
Thanks in advance..
Rgds,
AbhiHere are some notes I have from when I recently added a new screen/subscreen to Material Master transactions. Hopefully this information will help you.
This guide should be used in conjunction with OSS note 44410 and IMG notes Logistics->Logistics Material Master->Material->Configure Customized Material Master.
Online Maintenance.
1. Add fields to append structure ZAEMARA.
Use data dictionary maintenance u2013 SE11
2. Generate table MARA.
3. Add fields to view MARU and generate.
Use data dictionary maintenance u2013 SE11.
4. Create new sub-screen or add new fields to screen SAPLYMM1 9001.
Use Screen Painter u2013 SE51.
Change flow logic to add fields to field: statement and to add any validation required. Generate screen.
If this is the first time additional data has been added to material master it will be necessary to create a new function group and associated programs. See Configure Customised Material Master paragraph Requirements.
5. If new sub-screen, add to Customer main screen.
Transaction OMT3.
Double click on u2018Std industry sequenceu2019.
Choose customer screen and Details.
Change the first occurrence of 0001 (blank screen) to new screen number.
Save.
Back arrow.
Click on Transport button and choose required transport.
6. To include in 'Copy with Reference' processing - MM01, add new MARA fields to table T130F. (in each client)
Use Transaction SM31. (make a copy of another ZZ field by typing over existing name).
Add to transport manually:- R3TR TABU T130F + individual keys
7. Test Material create, change, display. -
How to activate the new fields on material master(MM01/MM02/MM03) for existing Materials
Hi,
We have a requirement to add some custom fields as a new tab in additional data option(Descriptions, Unit of measure, etc.) in Basic data of Material master (MM01/MM02/MM03). I have successfully added and these custom fields and they are not part of standard(MARA, MARC) but a custom table and the updates are also done in custom table.
For new materials, I can see the new tab in additional data screens of basic data view and I could successfully create/change/display using MM01/MM02/MM03. However I cannot see the new tab/fields for existing materials in the system in all 3 tcodes (MM01/MM02/MM03). This is not a main view in material master so that I can extend it by MM01.
Is there any setting or mass generation program I have top perform so that I can see and maintain these new fields for existing materials. Appreciate any leads or help on this.
Thanks,
HarryHello Harry,
Goto t.code SPRO ---> Display IMG ---> Logistics - General --> Material master --> Configuring the material master --> Create program for customized screens
Use the above path and create the screen and assign it to the sequence using the below link as reference.
**************** - Tips - Implementing screen exits for MM01/MM02/MM03
Regards,
Thanga
Maybe you are looking for
-
How do I transfer applications from AirPort Time Capsule to my new SSD?
Hi, I wonder how to transfer my applications, Logic Studio etc, from the AirPort Time Capsule to my new SSD on the iMac. I can't do a complete restoration beacause the SSD is to small, only 255 GB. I have Mountain Lion. Thomas
-
Do I need to reinstall the OS because my screen looks like this?
The link below is a screenshot of my laptop screen. My MacBook has been doing this every 3-4 weeks for the past year or so. When it does this, sometimes it'll beep every couple of seconds too. It won't allow me to control the mouse or keyboard anymor
-
Trying to diagnose a problem long-distance re: browser window
My elderly mother lives 900 miles away, and is having trouble opening her browser (Firefox). She is using a Powerbook G3, running 10.2.8 with 256 RAM, and uses Firefox for Internet access using a broadband connection through a cable modem. Over the l
-
HP connection manager not installed
I changed my OS and i installed all the driver of my model from hp forum but my wifi is not working and HP connection manager is not installed.
-
How do i update these drivers? I looked on the website and there was none is this computer outdated to far?