Get network component in CN23

Hello,experts,how can i get the network components that display in CN23,i use ''BAPI_NETWORK_COMP_GETDETAIL' before,but i found it will also get the deleted component,so someone can tell me which Function or BAPI except ''BAPI_NETWORK_COMP_GETDETAIL' can achieve this,thank you in advance.

Hi Srinivasa,
For finding the Tcodes use the link below. It has a list of all the SAP Tcodes.
http://www.easymarketplace.de/transactions.php
Table AFAB stores the Network-Relationships.
Hope it helps.
regards,
Raj

Similar Messages

Project details of network ID in CN23

hi guys,
i need to create a report, to extract the details for Project PRs. i need to get the network ID, and together with the project details ( project ID, description etc).
but i were unable to find where the project details located in table, which link to the network ID ( NPLNR which found in EBKN).
the transaction code of viewing the project description for a network ID is CN23.
can any one tell me the tables for the linkage? thanks

Hi
base tables are PROJ and PRPS
from this take WBS element number and
The linking between the tables of network orders and the Purchase related tables are
afko-pronr = prps-psphi
afvc-projn = prps-pspnr
and
aufk-pspel = prps-pspnr
ebkn-nplnr = afko-aufnr for PR link
ekkn-nplnr = afko-aufnr for PO link
mseg-nplnr = afko-aufnr for GR/GI link
Regards
Anji

NotRealizedError: Can not get visual component on an unrealized player

Exception in thread "main" javax.media.NotRealizedError: Cannot get visual component on an unrealized player
     at com.sun.media.BasicPlayer.getVisualComponent(BasicPlayer.java:491)
     at com.sun.media.MediaPlayer.getVisualComponent(MediaPlayer.java:48)
     at com.jbe.core.jdk.test.VideoMetadataTest.main(VideoMetadataTest.java:24)
Unable to handle format: mpeglayer3, 32000.0 Hz, 0-bit, Stereo, Unsigned, 8518.0 frame rate, FrameSize=9216 bits
public static void main(String[] args) throws NoPlayerException, IOException {
          URL url = new URL("file:C:/Video/Test.avi");
          Player player = Manager.createPlayer(url);
          player.realize();
          System.out.println(player.getVisualComponent());
     }This is my error log and my source code. Is there something I am doing wrong.? Please help me resolve this error.
Thanks,
Krishnan

the AirPort Express will no longer allow me to double NAT it and just continues to give me an error that the DHCP range conflicts with the WAN IP address of the base station?
Two possible fixes:
1) Perform a Factory Default Reset on the Express to clear out all the old and conflicting settings, then reconfigure it again.
2) Change the DHCP range settings.
For example, if the Express is now set to provide IPs from say 192.168.1.2 to 192.168.1.200......change the setting to read something like 192.168.5.2 to 192.168.5.200.
2) will likely allow you to bypass 1). But, I would still recommend that you do 1) as it is always a good idea to start from scratch when you are making changes to a device on a network.
Tesserax will have other good ideas for you as well, I am sure.

Startup gets 'Network cable unplugged' on mini-PCI wireless card

I recently installed a Netgear DG834GT wireless router and now have an intermittent problem connecting my Tecra 9100 to it. If the 9100 has been shutdown for a while (like overnight), when I restart I always get 'Network cable unplugged' for the wireless connection. Rebooting a number of times (anything from 3 upwards) I eventually get connected to the router and all then works fine for hours. Even a quick restart at this point (i.e. once the wireless card has connected) does not cause a problem but as soon as I leave the machine shutdown for a length of time it fails again at reboot.
There are no errors in the Event log.
I am using the built in mini-PCI wireless card and have already upgraded to the latest driver.
Any ideas gratefully recieved, at the moment each morning is a 20-30 minute frustration of rebooting trying to get my connection working.
(Running Win2K Professional)

Checking other boards for help (Netgear etc.) it seems that the 'Network cable unplugged' is a common message when wireless connectivity is failing. However, to prove the point, I have disabled the other LAN card (for which I was also getting 'network cable unplugged' but as expected since it was). I still get the same issue with the wireless card, although now the reboots are slightly more predictable - it normally seems to succeed on the third reboot. I guess disabling the other card has changed the startup timing slightly and in that way made things slightly better.
Again, any other suggestions gratefully received. As this seems to be a timing issue at startup, I am suspicious that one of the other things that runs at that time is causing the problem.

Startup gets 'Network cable unplugged' on mini-PCI wireless card (again)

Reposting as previous topic has been locked although has not been resolved. Original post below, please see previous post for more details
I recently installed a Netgear DG834GT wireless router and now have an intermittent problem connecting my Tecra 9100 to it. If the 9100 has been shutdown for a while (like overnight), when I restart I always get 'Network cable unplugged' for the wireless connection. Rebooting a number of times (anything from 3 upwards) I eventually get connected to the router and all then works fine for hours. Even a quick restart at this point (i.e. once the wireless card has connected) does not cause a problem but as soon as I leave the machine shutdown for a length of time it fails again at reboot.
There are no errors in the Event log.
I am using the built in mini-PCI wireless card and have already upgraded to the latest driver.
Any ideas gratefully recieved, at the moment each morning is a 20-30 minute frustration of rebooting trying to get my connection working.
(Running Win2K Professional)

More info : I have found that this is time related rather than related to the number of reboots. It always fails on the first reboot after being shut down for a period of time. At this point, however long I wait the connection never comes up. However, if I wait a few minutes and then reboot, the second reboot will always successfully establish the connection.
On this basis, the problem has become slightly less annoying as I have a workaround - boot once, wait a few minutes and reboot. That being said, any information on how I can isolate this further (e.g. tracing what is running at startup) would be gratefully recieved.

How can i get a component from frame?

how can i get a JTextField component from the frame?
in my program i use button and text fields, when button is pressed the action listener performs the needed actions: it must take the values in the text fields and do something with them,
for example i have a button - view:
look at the comments
public class _ActionListener_search implements ActionListener {
     private JFrame frame;
     private database dtbs;
     public _ActionListener_search(JFrame frame, database dtbs) {
          this.frame = frame;
          this.dtbs = dtbs;
     @Override
     public void actionPerformed(ActionEvent arg0) {
          if (arg0.getActionCommand().equals("view_person"))
                                        //HERE i want to get values from text fields!
                                        //i need to get JTextField component from frame and use it
view.addActionListener(new _ActionListener_search(frame, dtbs));how can i do it?
is this a correct way?

Encephalopathic wrote:
If you know that you're going to need the data held in them why not give the class that holds them a public method that returns the Strings that they hold.
public String getTextFieldXyzText()
return textFieldXyz.getText();
}Then if your actionlistener has a reference to this class's object, it can simply call the above method.That's what I was thinking. The view has a method getXyzText() and the listener (or some larger, enclosing controller) knows the view.
What I would get away from is a single, switch-board listener hooked to a 100 unrelated buttons.

Urgent !please help!! how to get children component in encodeBegin()?

hello all
how can get children component in encodeBegin()?because when encodebegin the tree is not constituted so i can't get children component,how to solve?
please help!

You aren't providing enough information to know for sure what is going on, but a likely problem is that you're rendering a JSP page with a new component tree for the first time, so the components are getting built as the page executes.
In the EA3 release, this caused a problem, because encodeBegin() was called from the doStartTag() method of the JSP tag (i.e. before the child components have been created). However, in EA4 the call to encodeBegin() was moved to doEndTag(), so the child components should now be getting created already.
In order to debug this any further, we'll need a specific example of what you're doing, and what version of JavaServer Faces you're trying it with.
Craig

I get Network error when I sign in to register my CS5 illustrator. Any ideas how to fix it?

My Adobe ID works fine when I sign in on the Adobe website but when installing my CS5 Illustrator I get network error when I sign in to register my serial number. Any ideas how to fix this?

Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

How can I get the component LTC1060 in the multisim 10 library ?

How can I get the component LTC1060 in the multisim 10 library ?

ahnsei ,
This is a switched capacitor filter - with a variety of configurations for each mode of operation based on the switching frequency. To create a transistor level SPICE model would be unrealistic (which is probably why you haven't found one), so I would suggest looking at the datasheet and specifically, looking at each mode of operation and seeing if you can approximate the filter topology with an expression for the transfer function given in the datasheet (by calcuting based on the switching frequency).
Based on the expression you get, you can use the Multisim component "TRANSFER_FUNCTION_BLOCK" to plug in the correct transfer function and thus approximate the behavior of the filter in the circuit.
This transfer function can be found in the Master database -> Sources -> CONTROL_FUNCTION_BLOCKS. There was a previous discussion giving some additional details on how to setup the transfer function block:
http://forums.ni.com/ni/board/message?board.id=370&thread.id=3987
Regards,
Patrick Noonan
Business Development Manager
National Instruments - Electronics Workbench Group
50 Market St. 1-A
S. Portland, ME 04106
Email: [email protected]
Tel. (207) 892-9130
Fax. (207) 892-9508

How to get Network Printing to work with Brother!!

So i have my BROTHER DCP-7020 printer connected to my Windows machine and i've been sharing the printer on the network with my old iMac 24' which prints perfectly. Now i have the 27' imac and i have no idea why it won't do printing via network, plugging in USB works fine, i've installed the driver but it doesn't look like it did anything. It just worked on my 24' without any hassle, it gets detected in the "Printer Settings" automatically and i dont recall doing anything to get it to work before.
Can anyone give me some tips of why it won't print and what I need to do in order to get network printing to work on my new Mac?
By the way BOTH MACHINE runs SNOW LEOPARD.
Thanks in advance.

Here's the troubleshoot: http://support.apple.com/kb/HT1404
And here is the manual method: http://support.apple.com/kb/HT3049
Hope this helps!

I connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone.

i connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone. what should i do.?

First, you do not have a 3G if you could upgrade it to 6.1.3, because 4.2.1 is the last version that will work on the 3G. So you either have a 3GS or you somehow hacked the phone to install an incompatible version. You can check the model you have by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
Assuming you have a 3GS the most likely reason for your problem is you have a gray market phone that was hacked or jailbroken to unlock it. When you upgraded it you removed the hack, so the phone is now locked to its original carrier.

How to get network IP camera of images or media ?

Please tell me how to use jmf to get network IP camera of images or media?
if you can provide source code, send me please
my e-mail: [email protected]
thanks!!⊙ω⊙

Hi
m also doing almost same work..wht u r tryied to do. I got the JMF-code, which capture video from webcam & split it in to Frame. But don't know how to capture video from ip-camera.....Can u help me...???

WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037

I have couple of VMs Server 2012 R2 RTM on Hyper-v Host running the same OS.
All machines including host and VM that is not in domain have an error in Windowsupdate.log:
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
FW and UAC are off on all. There are posts on web discussing the same error but most of them connect this to WSUS or Config Manager. And it is clear because we are touching Windowsupdate.log when troubleshooting WSUS. And because WSUS on 2012 is BUGGY this
error confuses too.
Finally, as mentioned earlier I deployed NEW server 2012 not from SYSPREP and did not place it to the domain. Updated the machine from MS update. Everything is OK beside the same error about COST :).
So now it is clear it has nothing to do with WSUS or Configuration manager. It indicates to some Network issue. But there is no clear answer. Some suggest just to ignore the error if everything is OK. But I would like to have a clean log. And it is just
interesting what could cause the problem. Is it Hyper-V stuff or Server 2012 itself. Anyway I guess I am doing right by posting a question on HV forum since here are people that should know 2012 .
Thanks.
see the log below
2013-12-16 20:32:03:610 752 b44 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2013-12-16 20:32:04:047 752 b44 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2013-12-16 20:32:04:047 752 b44 PT   + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, Server URL =
https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx
2013-12-16 20:32:04:047 752 b44 Agent Reading cached app categories using lifetime 604800 seconds
2013-12-16 20:32:04:047 752 b44 Agent Read 1 cached app categories
2013-12-16 20:32:05:016 752 b44 PT   + SyncUpdates round trips: 2
2013-12-16 20:32:06:422 752 b44 Agent   * Found 0 updates and 14 categories in search; evaluated appl. rules of 449 out of 701 deployed entities
2013-12-16 20:32:06:422 752 b44 Agent *********
2013-12-16 20:32:06:422 752 b44 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates Id = 2]
2013-12-16 20:32:06:422 752 b44 Agent *************
2013-12-16 20:32:06:422 752 b44 IdleTmr WU operation (CSearchCall::Init ID 2, operation # 20) stopped; does use network; is not at background priority
2013-12-16 20:32:06:422 752 b44 IdleTmr Decremented PDC RefCount for Network to 0
2013-12-16 20:32:06:422 752 b44 IdleTmr Decremented idle timer priority operation counter to 1
2013-12-16 20:32:06:422 752 ba0 AU >>## RESUMED ## AU: Search for updates [CallId = {5393115A-5840-4CB4-9C66-F68034E75DF8} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2013-12-16 20:32:06:422 752 ba0 AU   # 0 updates detected
2013-12-16 20:32:06:422 752 ba0 AU #########
2013-12-16 20:32:06:422 752 ba0 AU ## END ## AU: Search for updates [CallId = {5393115A-5840-4CB4-9C66-F68034E75DF8} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2013-12-16 20:32:06:422 752 ba0 AU #############
2013-12-16 20:32:06:422 752 ba0 AU All AU searches complete.
2013-12-16 20:32:06:422 752 ba0 AU AU setting next detection timeout to 2013-12-17 22:55:28
2013-12-16 20:32:06:422 752 ba0 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2013-12-16 20:32:06:422 752 ba0 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

Hi pob579,
Sorry for the late .
I want to know if your network connection indicates " unidentified network ".
If that is the case , you can try the step below :
    open the "local group policy"
    expand local computer policy -->computer configuration -->windows settings -->security settings
--> network list manager policies
    in the right pane you will see Unidentified Networks , double click it , then you can configure the
Location Type when the network connection is unidentified
    If there is domain , you need to change the same entry in "Domain Policy"
    after that please restart your computer
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Tried both ways in the Wiki, still can't get network printing work

Hi,
I have tried both the client and server ways following the Wiki, still could not get network printing work.
For the first way, I tried to put either the host name or the ip address (starting with 192) of the remote printer into /etc/cups/client.conf. But both Okular and Evince failed to see the printer in the dialog.
For the second way, with cups-browsed running, it only managed to discover printers in my local network (ip starting with 137) which I have no access. I tried to manually add the printer using its ip, but it still did not work.
What can I do? I have spent hours trying to work it out but failed. I would appreciate a lot your help. Thanks.

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? Ones with a green checkmark are solved.

I keep getting network error on Facebook on my iPad

My Facebook was working fine on my Wi Fi but in the last week I keep getting network error when trying to logon to Facebook from my iPad & iphone 5s. I have time warner road runner digital cable. How do I fix it?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Get network component in CN23

Similar Messages

Maybe you are looking for