Get number of active instances for an orchestration using WMI

I would like to get number of active, ready to run and dehydrated instances for an orchestration in my master orchestration. How can I do this using WMI?
Thanks in advance!!

I have done it recently...its quite simple...
You can use System.Management in a helper library and create a helper method to implement this ->
int instanceCount = 0;
ManagementObjectSearcher searcher = new ManagementObjectSearcher("root\\MicrosoftBizTalkServer", "SELECT * FROM MSBTS_ServiceInstance WHERE ServiceName='<name of your orchestration>'");
foreach (ManagementObject queryObj in searcher.Get())
//Count for Active, Ready To Run and Dehydrated
if (queryObj["ServiceStatus"].ToString() == "1" || queryObj["ServiceStatus"].ToString() == "2" | queryObj["ServiceStatus"].ToString() == "8")
instanceCount = instanceCount + 1;
return instanceCount;
You can pass your orchestration name as a parameter to this method. Additionally you can modify the if conditions to include/exclude instance status.
Make sure to verify the syntax before you use it!!

Similar Messages

Errormessage: "Number of activations exceeded" though I only use 2 devices.

errormessage: "Number of activations exceeded" though I only use 2 devices.
Thank your for helping me with this issue.
I had to reset my mobile phone and my tablet and now this message appears on my mobile phone:
"Number of activations exceeded" though I only use 2 devices.
I use Mantano reader premium.
Kind regards,
Regula

Thank you Dominic, unfortunately your link does not give me the exact help
what to do next.There are only some general links.
Somewhere in the forum I found this:
. If you reach the limit,
contact Customer Service to increase your allowable activations. Please
let us know if these will help in resolving your issue.
Is there an emailadress to contact, sinI am at work and can't chat.
Thank you and kind regards,
Regula
2014-02-17 7:41 GMT+01:00 Dominic Michael <[email protected]>:
Re: errormessage: "Number of activations exceeded" though I only use
2 devices. created by Dominic Michael<http://forums.adobe.com/people/Dominic+Michael>in *Adobe
Digital Editions* - View the full discussion<http://forums.adobe.com/message/6127568#6127568

So where can I get an iPhone 4/4S for sale to use without the contract? Anyone?

So where can I get an iPhone 4/4S for sale to use without the contract? Anyone?

Thank you for letting me know! That is a GREAT deal! I would buy that if I hadn't already spent my $335 I did earlier at the end of November. I found a good deal for a new white iTouch 4 64GB which is an iPhone 4 without the contract only it was in the color I wanted and the biggest capacity of the new line of iPhones. But thank you anyways! Like i said if I hadn't already bought mine I would probably do that one.

How to create an instance for RemoteSession without using create() method

How to create an instance for RemoteSession without using create() method?

What's RemoteSession? Not in the JDK. And does the question have anything to do with concurrency?

Please help how can I get Number of activations changed?

How can I get my iPads reset for number of activations? I have had an original iPad and two iPad 3 and now 3 iPad Air due to defective tablets.They were replaced for technical issues. I keep getting this message on both devices in BAM2 E_AUTH_BAD_DEVICE_KEY_OR_PKCS12
I have not even read the book I originally purchased from BAM. Please help.

They'll know more in the Adobe Digital Editions Forum

Number of SAP instance for IDM 7.1 IdP ? IDM 7.1 SP5 with UI also for 7.2 ?

Hello,
I've just read the SAP NW IDM Identity Provider Implementation Guide. It seems very interesting. One question though : it seems the Identity Provider must be deployed on a NW CE 7.2 system.
So we end up having a NW CE 7.1 Ehp1 for IDM UI with IDM runtime, designtime and database (all on the same server) and we must have another server or another SAP instance for the IdP with CE 7.2 ?
Will IDM 7.1 SP5 UI also be compatible with / be developed for CE 7.2 to avoid another SAP instance ?
Finally will Windows 2008 be officially certified for IDM 7.1 ?
Thanks in advance,
Hervé

Hello Petr, I think this might be a problem. Probably you would be able to do what you want to do within a portal setup, where IdM is providing content to that portal. However, the development would take place in the portal and not per se be a development in the IdM UI. As I understand it the IdM UI is configurable to some extent, but not changeable by customers.
Rgds.
Anders

Getting product state for Anti Virus using WMI.

Hi All,
I have seen lot on blogs and discussion on productstate for AV, AS and FW. But none of them give the complete information of product state.
Do MSDN has any link that explains the product state completely. Or any relevant link for this.
Moreover pre Vista os using WMI we can find the version of AS, AV ans FW, but in post Vista OS WMI does not provide the information of version of the product so how we can achieve this in post Vista os.

Have you looked at this?
https://msdn.microsoft.com/en-us/library/jj155489%28v=vs.85%29.aspx
thanks
Frank K [MSFT]
Follow us on Twitter, www.twitter.com/WindowsSDK.

Any way to get number of active sessions

Hi,
          With the deprecation of the HttpSessionContext interface as of Servlet API
          2.1 for security reasons, is there any way to know how many sessions are
          currently active in a given WebLogic instance?
          Thanks,
          Sanjiv


You could make it a singleton. The overhead is nothing ... trust me. Run
          WebLogic through a profiler if you don't ;-)
          Good luck,
          Cameron Purdy, LiveWater
          "Sanjiv Gulati" <[email protected]> wrote in message
          news:[email protected]...
          > Thanks for sharing this technique. Although I haven't used the
          > HttpSessionBindingListener interface myself, this will work as long as I
          add
          > an instance of SessionCounter in each new session. The only modifications
          > I'll add to the code below would be a synchronized block within the
          > valueBound and valueUnbound methods so that modifications to m_cSessions
          are
          > thread safe.
          >
          > The overhead associated with this approach will be the following:
          > 1) For every session there will be an associated SessionCounter, and
          > 2) Serialization of requests that end up invoking the valueBound &
          > valueUnbound methods.
          >
          > But I guess this cannot be avoided.
          >
          > Thanks,
          > Sanjiv
          >
          > Cameron Purdy <[email protected]> wrote in message
          > news:[email protected]...
          > > The only portable implementation is to have all requests go through your
          > > servlet code (or JSP code) and check if the session is new
          > > (HttpSession.isNew). If so, register a value with the session that
          > > implements HttpSessionBindingListener. Something like:
          > >
          > > class SessionCounter implements HttpSessionBindingListener {
          > > // count of active sessions
          > > private static int m_cSessions;
          > > // accessor for count of active sessions
          > > public int getSessionCount() {
          > > return m_cSessions;
          > > }
          > > // this object placed on a session
          > > void valueBound(...) {
          > > ++m_cSessions;
          > > }
          > > // this object removed from a session
          > > void valueUnound(...) {
          > > --m_cSessions;
          > > }
          > > // end class
          > > }
          > >
          > > It is host-local ... meaning it only tracks one host in a cluster.
          > > Actually, it only tracks sessions within one classloader on one host in
          a
          > > cluster, but don't worry about that distinction.
          > >
          > > And no, I've never done it, but it is apparent that you could, if you
          > chose
          > > to:
          > >
          > > 1) Count sessions
          > > 2) Track all session instances
          > > 3) Have session-level events, such as onCreate/onDestroy
          > >
          > > Hope it helps,
          > >
          > > Cameron Purdy, LiveWater
          > >
          > > "Sanjiv Gulati" <[email protected]> wrote in message
          > > news:[email protected]...
          > > > Hi,
          > > >
          > > > With the deprecation of the HttpSessionContext interface as of Servlet
          > API
          > > > 2.1 for security reasons, is there any way to know how many sessions
          are
          > > > currently active in a given WebLogic instance?
          > > >
          > > > Thanks,
          > > > Sanjiv
          > > >
          > > >
          > >
          > >
          >
          >

Can't get past the activation screen for iphone 3Gs

I am trying to activate the iphone 3Gs after switching from blackberry. When I turn the phone on, I get to the "welcome"screen, I choose my country and then given the option to activate through WiFi or iTunes. When I activate through WiFi, I get a message saying that the activation server is unavailable and to try again in a few minutes ( tried it again and was unsuccessful). I then attempt to activate through iTunes and receive a message saying that there is no SIM card in the phone (when there is). I am stuck here with a phone that is not working! I do not know what to do. I took it into Apple for them to check it out and they can't find the problem. Maybe someone has come across this issue and had it resolved? Please share!
Thanks!
MCHS0000

You are asking in a thread that is 18 months old. Whatever.
Here are possible causes for that message:
1. Your antivirus is blocking access to gs.apple.com.
2. Your phone is jailbroken.
3. Your computer has been used at some time in the past to jaibreak some iOS device (not necessarily the phone with the problem), and its network database was corrupted by the hacking software that was used.
4. Apple's activation servers are down (very rare, and never for more than an hour or so).
For 1. try disabling your antivirus.
For 2. & 3. you need to go somewhere other than an apple forum for help. Although you can try deleting lines containing gs.apple.com from your "hosts" file on your computer.
Windows: c:\windows\system32\drivers\etc\hosts
Mac: /etc/hosts

How do I get a device activation code for my ipad 2 so that I can activate Netflix?

My netflix account requires a device activation code. How do I get one for my ipad?

I agree with zukes. There is no activation code entry, or at least there wasn't when i installed the app. You are using the app from the appstore, as opposed to going in thru safari, right. I do not know where you are from, and maybe the international app is different. But in the us, all you need is your e mail and password from your netflix account.

Limit Number of active sessions for wlan user in Cisco Prime

Is there a way to limit the number of logins from a particular set of credentials in Cisco Prime 2.1? I want to set a maximum of 2 logins from a particular user on the wlan. I have a guest wlan using layer 3 security and an internal wlan using RADIUS (Windows). Would appreciate the help

There is, but it isn't due to PI. It is a function of the WLC itself.
Under Security, there is a Concurrent User Login, set to 0(which is default) it is unlimited logins. This value can be changed to be the number of concurrent logins that work for your situation.
Be advised, this is not a Per WLAN setting, it is a controller wide setting.
HTH,
Steve

Pls hw can i get d enterprise activation password for bb 8320

Tour™ 9630

I understand. i copied the information from the above link. You have to have the correct data plan on your pone or this will not work.
After getting a new BlackBerry® smartphone, one of the first things you’ll want to do is add your email address so you can receive email on your device. Integrating your email address will allow you to receive messages in near real-time, reply and forward, filter message by sender or subject, and much more.
To integrate an email address with your BlackBerry smartphone, just complete the following steps:
1. Locate and click on the Setup folder.
2. Within the Setup folder, click on Email Settings and if prompted, review the Terms of Agreement.
3. A listing of various email providers will now be displayed:
• If you are integrating a Yahoo!, Gmail, AOL or Windows Live email address, highlight the appropriate icon and click Next.
• If you are integrating an email address from another provider, select Other.
4. Provide the email address and password and in most cases, you’re done!
or from the device go to blackberry.com/integrate
and see if you can setup your email from there.
Again, without the dataplan these steps will not work. If you call your carrier, they can help set this up too.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Adding a listener to Active directory for user creation using Java

Hi,
I would like to add a listener to active directory such that when a user is created to the "Users" container, I should be notified or informed. I would like to do this with Java. What should I do ?
Regards,
Anand Kumar D

You should add a NamingListener or a NamespaceChangedListener.

Getting Missing Permissions manifest attribute for several Jar using 11.1.2.1 and JRE 7 update 25

Hi all
I'm in the deployment test phase for some apps on forms 11.1.2.1 from Windows to Linux.
My client laptop is running Java 7 Update 25.
Before putting things to run on the application server, i resigned some jar files apart from jabob, using sign_webutil.
Now i have issues on practical every jar specificed on my config section:
For example:
Missing Permissions manifest attribute for: http://192.168.1.8:8888/forms/java/frmwebutil.jar
Missing Codebase manifest attribute for: http://192.168.1.8:8888/forms/java/frmwebutil.jar
Missing Permissions manifest attribute for: http://192.168.1.8:8888/forms/java/frmall.jar
Missing Codebase manifest attribute for: http://192.168.1.8:8888/forms/java/frmall.jar
Missing Permissions manifest attribute for: http://192.168.1.8:8888/forms/java/frmwebutil.jar
Missing Codebase manifest attribute for: http://192.168.1.8:8888/forms/java/frmwebutil.jar
Missing Permissions manifest attribute for: http://192.168.1.8:8888/forms/java/frmall.jar
Missing Codebase manifest attribute for: http://192.168.1.8:8888/forms/java/frmall.jar
Missing Permissions manifest attribute for: http://192.168.1.8:8888/forms/java/frmwebutil.jar
Missing Codebase manifest attribute for: http://192.168.1.8:8888/forms/java/frmwebutil.jar
Missing Permissions manifest attribute for: http://192.168.1.8:8888/forms/java/frmall.jar
Missing Codebase manifest attribute for: http://192.168.1.8:8888/forms/java/frmall.jar
Missing Codebase manifest attribute for: http://192.168.1.8:8888/forms/java/webfigoicons.jar
Missing Permissions manifest attribute for: http://192.168.1.8:8888/forms/java/keyfilter.jar
Missing Codebase manifest attribute for: http://192.168.1.8:8888/forms/java/keyfilter.jar
Missing Permissions manifest attribute for: http://192.168.1.8:8888/forms/java/FJCalendar.jar
Missing Codebase manifest attribute for: http://192.168.1.8:8888/forms/java/FJCalendar.jar
Missing Permissions manifest attribute for: http://192.168.1.8:8888/forms/java/jcalendar-1.3.2.jar
Missing Codebase manifest attribute for: http://192.168.1.8:8888/forms/java/jcalendar-1.3.2.jar
Missing Permissions manifest attribute for: http://192.168.1.8:8888/forms/java/looks-2.0.1.jar
Missing Codebase manifest attribute for: http://192.168.1.8:8888/forms/java/looks-2.0.1.jar
Missing Permissions manifest attribute for: http://192.168.1.8:8888/forms/java/lablediconbutton.jar
Missing Codebase manifest attribute for: http://192.168.1.8:8888/forms/java/lablediconbutton.jar
Missing Permissions manifest attribute for: http://192.168.1.8:8888/forms/java/icepdf.jar
Missing Codebase manifest attribute for: http://192.168.1.8:8888/forms/java/icepdf.jar
Missing Permissions manifest attribute for: http://192.168.1.8:8888/forms/java/FormsGraph.jar
Missing Codebase manifest attribute for: http://192.168.1.8:8888/forms/java/FormsGraph.jar
Missing Permissions manifest attribute for: http://192.168.1.8:8888/forms/java/frmwebutil.jar
Missing Codebase manifest attribute for: http://192.168.1.8:8888/forms/java/frmwebutil.jar
Missing Permissions manifest attribute for: http://192.168.1.8:8888/forms/java/jacob.jar
Missing Codebase manifest attribute for: http://192.168.1.8:8888/forms/java/jacob.jar
Missing Permissions manifest attribute for: http://192.168.1.8:8888/forms/java/lablediconbutton.jar
Missing Codebase manifest attribute for: http://192.168.1.8:8888/forms/java/lablediconbutton.jar
com.sun.deploy.security.BlockedException: El usuario ha denegado los privilegios de código
    at sun.plugin2.applet.Plugin2ClassLoader.getPermissions(Unknown Source)
    at sun.plugin2.applet.Applet2ClassLoader.getPermissions(Unknown Source)
    at java.security.SecureClassLoader.getProtectionDomain(Unknown Source)
    at java.security.SecureClassLoader.defineClass(Unknown Source)
    at java.net.URLClassLoader.defineClass(Unknown Source)
    at sun.reflect.GeneratedMethodAccessor2.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at sun.plugin2.applet.Plugin2ClassLoader.defineClassHelper(Unknown Source)
Etc. etc.
What's wrong? Was it a mistake to resign jar files?
How to correct this one ...?
Help will be greatly appreciated ....!

As always, it is highly recommended that before installing any software, you should read the documentation. Please take a look at the Java Plugin Release Notes for the version you installed. It will explain what you are seeing and why you are seeing it. As for Oracle Forms specifically, as mentioned, patches have been created for the latest Forms versions. However, at this time, what you are seeing in the console will not prevent your application from running. It is just a warning. In future versions, this may change.
Java SE 7 Update Release Notes
This will be very important information if you decide to create your own jar files. For example, to include images, java beans, etc.

In BAM, how to get activity ID for the running instance in the orchestration.

I am trying to add document reference URL to the active instance in the orchestration for the activity which is already started.
Please let me know how to get such activity ID.
Thanks
Jagadeesh
Jagadeesh RS

Are you using TPE to set up the Activity Tracking or BAM API. If you are using TPE then identify what has been set as the Activity Id in the BTT file. If the Message Id is used then use "BTS.InterchangeID" [refer
http://msdn.microsoft.com/en-us/library/aa562116.aspx] on the received message to get the Activity Id.
If however you've mapped the Activity Id in BTT to the InstanceId then use
"Microsoft.XLANGs.Core.Service.RootService.InstanceId"
to get the activity id.
Regards.

Get number of active instances for an orchestration using WMI

Similar Messages

Maybe you are looking for