Get original data from input after being parsed by formatter

Hello.
How do you get the original input value from a TextInput after it's been formatted using a Spark Formatter?
Thank you.

Hello Loring
Please check Where Used List for /SAPAPO/OM_PEGID_GET_ORDERS in SE37. You will see the sample code within standard SAP program.
Also do read Function Module documentation for this FM, this has special mentioned that -
It is designed specially for use in APO and should not be used for
standard tasks, in particular selecting orders by pegging area.
Hope this will help.
Thank you
Satish Waghmare

Similar Messages

HT201250 I have an Time Capsule (1 TB) and do not know how to get my data from it after reformatting my hard drive.

Due to multiple problems with Lion, I decided to reformat my hard drive with Snow Leopard (10.5.8) and now am unable to retrieve my data from my time capsule (1T). I tried to import but ended up with 342 pictures of mainly clip art and downloads from emails. Help. I don't know how to get to the time capsule. When I open time capsule, it shows only the dates since I reformatted on Sunday.

I don't think this helped me! I am afraid to do the Terminal thing if it can't be undone! I cannot afford to lose the time machine backups. When I open the time machine now, it shows only backups from Sunday when I reformatted the disk!!!
I did open disk utility which is as follows:
                              Capacity: 464.8 GB (499,113,885,696 Bytes)
                              Available: 441.6 GB (474,187,837,440 Bytes
                               Used: 23.2 GM (24,926, 048,256 Bytes)
                               Number of Files: 634,969
                              Format: Mac OS Extended (Journaled)
                              Owners Enabled: Yes
                              Number of Folders: 159,926
It gives me the option to restore, but then wants a source and destination. Is this the right place to be? I have Version 10.5.8.

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn that app back on. Would there be any way I would be able to get the data from that app?

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn the app back on. Would there be any way I would be able to get the data from that app onto my phone? Is it possible to put an old back-up on my phone?

LukaPetranovic wrote:
Hello anita4323.
I hope this will help you with your problem:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
You can restore your backup whenever you want from iTunes or iCloud, depending where you made it.
Let us know if you succeeded or need any further help.
I believe you are missing the point. The OP has already restored from back up, but failed to include a specific app in the back up and is trying to recover data for it, which in this case is not possible.

How get selected data from oracle data as per give input

sir i use Sun Java Studio Creator with oracle 10g
my direct want user give input through both listbox , textbox or string variable
how i pass this input in sessionbeen query and page give data in table as per user need
please give me step and code
this is urgent
thank's

You would get hierarchical data from a functrion in the same way as you would any data. Create a function returning a cursor and then use your SQL statement to open the cursor. Very simplistically:
Create Function My_Func Return Sys_Refcursor As
   l_cur Sys_Refcursos
Begin
   Open l_cur For
      'select EMPNO,ENAME,SYS_CONNECT_BY_PATH(ename, '/') "Path"
       from EMP
       start with MGR is null
       connect by prior empno=mgr';
   Return l_cur;
End;
Then, whatever calls the function would walk through the cursor an do whatever.
Jhn

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/

How can I get a family member back after being removed from family share?

How can I get a family member back after being removed from family share?

See [[Replace your Sync information]] but read the cautions carefully.
* also see [[firefox Sync is not working]]
It is always a useful precaution to make manual bookmarks backups
* see [[Backing up and restoring bookmarks]]
The above article also explains about the autobookmark backups that firefox generates, but be sure to make manual backups as you work, it is very easy to overwrite the wrong set of backups.
I am not entirely certain what firefox is doing in your case, perhaps the synced Netbook does not have the expected set of bookmarks on it.
Presumably sync may be uninstalled or disabled like any other add-on
*see [[Uninstalling add-ons]]

How do I get routing data from the Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application.

I have a tableView displaying a list of contacts from a Cloud Database. After selecting a contact, I push to a programmatically created MKMapView. Then I display the initial region (the view) that includes the users current location (starting point) and their selected destination (end point).
Now I want to display annotations (as described in the Location Awareness Programming Guide) that displays polylines which will represent the turn-by-turn navigation IN MY OWN APPLICATION, and not in the Map App currently used in IOS6.
Due to licensing and its becoming depricated in IOS 6, I do not want to get routing data from the Google Maps API. How do I get routing data from the IOS 6 Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application?
I checked out Stack Overflow and other forums which basically left me with the impression that this is not possible. I also checked out the TomTom iPhone Mobile SDK User Guide from the TomTom Developer Portal and am still confused. It must be possible to retrieve routes, since the Map App can display turn-by-turn directions. How can I retrieve turn-by-turn data that I may display as a route within my own application?

Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change.
I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
for her (using Linux) and...
got a new error code. Darn I was so sure I had found a clever solution this time lol.
Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
first so I could put them back if needed) to her new PC and the PC would not boot.
It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll.
ntdll.dll however seems necessary for Win7 to boot.
So what I am wondering now is:
Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
dll's path to the files it needs?
Willing to try any other options or settings you may have come up with as well.
Thanks again for your reply and my apologies for not answering sooner.

How to get the data from Pooled Table T157E.

Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.

create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil

Get the Data from a DataSource

Hi,
I start with JMF. I use a processor to get DataSource from an audio file. Until there, all runs very well.
But after that, I would like to get the raw data of my DataSource to aplly a filter on these data and after that, to create a new DataSource with filters data and play these data with my processor.
I searched in the API documentation of JMF but I did'nt find the solution to get the raw data of my DataSource !
Someone could help me ? and give me an idea of how to proceed ?
Thanks for yours answers.
Sylvain.

Hi,
It seems no one has replied to this post. I have a sample code that can help getting raw data from a DataSource. Here it is:
          PushBufferDataSource source = null;
          source = (PushBufferDataSource)processor.getDataOutput();
          /* Now we can retrieve the PushBufferStreams that will enable us to
          * access the data from the camera
          PushBufferStream[] streams = source.getStreams();
          camStream = null;
          for (int i = 0; i < streams.length; i++) {
          /* Use the first Stream that is RGBFormat (there should be only one */
          if (streams.getFormat() instanceof RGBFormat) {
               camStream = streams[i];
               RGBFormat rgbf = (RGBFormat)streams[i].getFormat();
               converter = new BufferToImage(rgbf);
               break;
Please let me know whether it helped solving your problem..
Suresh

Could not load data from database after adding a query

Dear all,
I have a working crystal reports 2011 report. This report get its data from a BW 7.01 system provided by three bex queries. Everything works as expected but not I have to add a fourth query to the report then I get the following messages:
I try to translate it because I user the german version:
INFORMATION: In this report a stored procedure is used. Ensure that no SQL expression was added and no grouping on server side will be done.
WARNING: Data could not be load from the database.
WANING: Invalid argument provided. Details: The key figure structure isn't a valid field for report generation. Use instead the real keyfigures with teir units.
Has anyone an idea what can be the reason for my issue?
Thanks and regards!

hi Gerrit,
a couple of questions...
1) are you adding all 3 queries (and then the 4th) in the same data connection or are each of these additional queries in a subreport?
2) if all 3 queries (and then the 4th) are in the same data connection are you linking them?
3) most importantly, if you create a brand new report off of the 4th query, is it successful?
it's been quite a while since I've worked with bex queries but in general adding multiple queries (or stored procs or commands or combinations thereof) to the same report is probably not a good idea. there ends up being a lot of processing happening in the crystal reports designer itself as a large virtual record set is created by the individual queries.
-jamie

What is the easiest way to get the data from the mailmerge to form Pages files that can be saved separately?

Using Iwork 09 I have spent several hours setting up a mail merge from a spread sheet in Numbers to create receipts for my customers from a Pages template.
After the merge I am left with one long Pages document that will not save as separate files; one per customer, it will only save the whole document of several receipts.
What is the easiest way to get the data from the mailmerge to form Pages files that can be saved separately?
Many thanks in advance.
Richard

Mr. Clark,
You will probably be more pleased with the iWork apps when you begin to learn your way around. Until you learn such basic things as how to print only one page of a document, you will probably continue to be disappointed.
Does your Print dialog look like this:
Or like this:
If it looks like the first one, then you will want to click this expander control:
Regards,
Jerry

Deleting original video from ipad after editing in imovie

Hi everyone. I am new to imovie on the ipad and I have just bought a GoPro Hero 2 to take some video.
My problem is that the video I am taking is in large clips. The camera is on for about 20 mins at a time and the useful footage is about 5 - 45 sec long each clip. I am planning to make about a 5 min movie but as you appreciate the amount of footage I take to get 5 mins of the good stuff is huge.
I want to know if I can make a project of multiple clips, that I want, but delete the original video which is 98% rubbish and clogging up the ipad? This process is going to take some time so I just want to get what I want ready for editing and delete the excess.
I tried to delete the original footage from iphoto after I edited out the stuff I wanted but then the project footage was lost.
I apologize if this has been answered or if this is a basic question but as I said this is all new to me. Any help would be appeciated.
Thanks in advance.

1. Ask on the iMovie forum, that's the best place for iMovie help.
2. When you get there, ask about export settings. Sounds like that's where the issue is.

How to get the data from a cluster table to BW

Dear All,
I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
In SE11 Transaction the Cluster (table ZES) is showing invalid table.
I referred some Forums, but no use.
Can any body tell me procedure to get the data from a cluster (table ZES) ?
Waiting for you results.
Thanks and regards
Rajesh

HI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh

Why do we get the data from a view to a report.

hi
why do we get the data from a view to a report. is it possible to get the data from a view in all the cases?

hi Jyotssna,
Suppose you are planning to get the data from multiple tables then you got to specify seveal condtions and make use of joins which results in poor performance in fetching the data . In order to improve the performance we make use of views where the conditions of different tables are defined and the data is fetched accordingly.
Regards,
Santosh

Unable to get the data from the stored procedure

Hello Folks,
I have this stored procedure and am trying to get the data from the table stage_bill but for some reason i am not sure its not pulling the data.Am a beginner in pl/sql Can any one please help to find out. I can give the code below.
create or replace procedure Load_FADM_Staging_Area_TEST(p_data_load_date date) is
-- local variables
v_start_date                date;
v_end_date                  date;
-- cursor starting
CURSOR c_get_data
IS
SELECT
   a.batch_id
,a.beginning_service_date
,a.bill_id
,a.bill_method
,a.bill_number
,a.bill_received_date
,a.bill_status
,a.bill_type
,a.change_oltp_by
,a.change_oltp_date
,a.client_datafeed_code
,a.client_id
,a.created_date
,a.date_of_incident
,a.date_paid
,a.deleted_oltp_by
,a.deleted_oltp_date
,a.duplicate_bill
,a.ending_service_date
,a.event_case_id
,a.event_id
,a.from_oltp_by
,a.oltp_bill_status
,a.review_status
,'HRI' schema_name
, sysdate Load_date
,'ETLPROCESS001' Load_user
,v_start_date as Row_Effective_Date
,null Row_End_date
from stage_bill a
where
--created_date >= to_date('20101031 235959', 'YYYYMMDD HH24MISS')
created_date >= v_start_date
and
--created_date <= to_date('20101111 235959', 'YYYYMMDD HH24MISS')
created_date <= v_end_date
and not exists
(select
b.batch_id
,b.beginning_service_date
,b.bill_id
,b.bill_method
,b.bill_number
,b.bill_received_date
,b.bill_status
,b.bill_type
,b.change_oltp_by
,b.change_oltp_date
,b.client_datafeed_code
,b.client_id
,b.created_date
,b.date_of_incident
,b.date_paid
,b.deleted_oltp_by
,b.deleted_oltp_date
,b.duplicate_bill
,b.ending_service_date
,b.event_case_id
,b.event_id
,b.from_oltp_by
,b.oltp_bill_status
,b.review_status,
b.schema_name,
b.Load_date,
b.Load_user,
b.Row_Effective_Date,
b.Row_End_Date
from STG_FADM_HRI_STAGE_BILL_TEST b)
-- cursor o/p variables
v_batch_id                  stage_bill.batch_id%TYPE;
v_beginning_service_date    stage_bill.beginning_service_date%TYPE;
v_bill_id                   stage_bill.bill_id%TYPE;
v_bill_method               stage_bill.bill_method%TYPE;
v_bill_number               stage_bill.bill_number%TYPE;
v_bill_received_date        stage_bill.bill_received_date%TYPE;
v_bill_status               stage_bill.bill_status%TYPE;
v_bill_type                 stage_bill.bill_type%TYPE;
v_change_oltp_by            stage_bill.change_oltp_by%TYPE;
v_change_oltp_date          stage_bill.change_oltp_date%TYPE;
v_client_datafeed_code      stage_bill.client_datafeed_code%TYPE;
v_client_id               stage_bill.client_id%TYPE;
v_created_date          stage_bill.created_date%TYPE;
v_date_of_incident    stage_bill.date_of_incident%TYPE;
v_date_paid         stage_bill.date_paid%TYPE;
v_deleted_oltp_by     stage_bill.deleted_oltp_by%TYPE;
v_deleted_oltp_date    stage_bill.deleted_oltp_date%TYPE;
v_duplicate_bill     stage_bill.duplicate_bill%TYPE;
v_ending_service_date   stage_bill.ending_service_date%TYPE;
v_event_case_id        stage_bill.event_case_id%TYPE;
v_event_id            stage_bill.event_id%TYPE;
v_from_oltp_by         stage_bill.from_oltp_by%TYPE;
v_oltp_bill_status   stage_bill.oltp_bill_status%TYPE;
v_review_status     stage_bill.review_status%TYPE;
v_schema_name        varchar(50);
v_Load_date          date;
v_Load_user            varchar(50);
v_Row_Effective_Date   date;
v_Row_End_Date         date;
Begin
if p_data_load_date is null then
    select (sysdate - 7), (sysdate - 1) into v_start_date, v_end_date from dual;
elsif p_data_load_date is not null then
   select (p_data_load_date - 7), (p_data_load_date - 1) into v_start_date, v_end_date from dual;
else
    raise_application_error('-20042', 'Data control - GetDataControlAuditData : Date parameter must be a date of this or a previous week.');
end if;
-- cursor c_get_data loop begin
OPEN c_get_data;
    LOOP                                                       -- cursor c_get_data loop begin
      FETCH c_get_data
       INTO
        v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
   v_Load_date,
   v_Load_user,
   V_Row_Effective_Date,
   v_Row_End_Date;
    EXIT WHEN c_get_data%NOTFOUND;
insert into STG_FADM_HRI_STAGE_BILL_TEST
batch_id
,beginning_service_date
,bill_id
,bill_method
,bill_number
,bill_received_date
,bill_status
,bill_type
,change_oltp_by
,change_oltp_date
,client_datafeed_code
,client_id
,created_date
,date_of_incident
,date_paid
,deleted_oltp_by
,deleted_oltp_date
,duplicate_bill
,ending_service_date
,event_case_id
,event_id
,from_oltp_by
,oltp_bill_status
,review_status
,schema_name
,Load_date
,Load_user
,Row_Effective_Date
,Row_End_Date
values(
       v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
v_Load_date,
v_Load_user,
v_Row_Effective_Date,
v_Row_End_Date ) ;
COMMIT;
    END LOOP;
    CLOSE c_get_data;

Maybe you need something else, like
CREATE OR REPLACE PROCEDURE load_fadm_staging_area_test (
p_data_load_date DATE
) IS
v_start_date   DATE;
v_end_date     DATE;
BEGIN
SELECT NVL (p_data_load_date, SYSDATE) - 7,
         NVL (p_data_load_date, SYSDATE) - 1
INTO   v_start_date,
         v_end_date
FROM   DUAL;
MERGE INTO stg_fadm_hri_stage_bill_test b
USING      (SELECT *
              FROM   stage_bill
              WHERE created_date BETWEEN v_start_date AND v_end_date) a
ON         (b.bill_id = a.billl_id)
WHEN NOT MATCHED THEN
    INSERT     (batch_id,
                beginning_service_date,
                bill_id,
                bill_method,
                bill_number,
                bill_received_date,
                bill_status,
                bill_type,
                change_oltp_by,
                change_oltp_date,
                client_datafeed_code,
                client_id,
                created_date,
                date_of_incident,
                date_paid,
                deleted_oltp_by,
                deleted_oltp_date,
                duplicate_bill,
                ending_service_date,
                event_case_id,
                event_id,
                from_oltp_by,
                oltp_bill_status,
                review_status,
                schema_name,
                load_date,
                load_user,
                row_effective_date,
                row_end_date
    VALUES     (a.batch_id,
                a.beginning_service_date,
                a.bill_id,
                a.bill_method,
                a.bill_number,
                a.bill_received_date,
                a.bill_status,
                a.bill_type,
                a.change_oltp_by,
                a.change_oltp_date,
                a.client_datafeed_code,
                a.client_id,
                a.created_date,
                a.date_of_incident,
                a.date_paid,
                a.deleted_oltp_by,
                a.deleted_oltp_date,
                a.duplicate_bill,
                a.ending_service_date,
                a.event_case_id,
                a.event_id,
                a.from_oltp_by,
                a.oltp_bill_status,
                a.review_status,
                'HRI',
                SYSDATE,
                'ETLPROCESS001',
                v_start_date,
                NULL
END load_fadm_staging_area_test;Whenever you code a cursor and a loop, ask yourself. Do I need that?
Regards
Peter

Get original data from input after being parsed by formatter

Similar Messages

Maybe you are looking for