Get source table (xml) constraint in flow control constraint/snp_check_tab

Hello experts,
I wanted to ask a question regarding the constraints of a source table. So I made a constraint where I check 'where varA > 0'. When I test this constraint it gives me 1 error and that's good. But in my Control tab of my interface there are only target table constraints displayed. So when there is a constraint violation in the source table, how do I get this error in the $E table and thus in the snp_check_tab, because I want to do an integration of this check_tab to my own table for logging purposes.
Thanks a lot
Yves

Hi,
In ODI error processing happen on I$ table which in turn gets data from source table(s) .
So if you put a filter then it will not flow into I$ table and hence not in E$ table as well .
At first I was using a filter source side: where result.code > '0000'. This was working fine but not inserting the 'bad' records into the error table. So I was trying to find a solution with a target side constraint, but this doesn't work.
Instead of fileter at source , you can create a constraint at the target side .
Go to model ----> your target table ----> constraint ----> Insert a new condition
Specify code > '0000'
If any record comes with code <='0000' then the same will get captured in the E$ table
Thanks,
Sutirtha

Similar Messages

How to get source table inside Template Mapping code template

Hi guys,
I have the following scenario, I have an table from external database and want to map it to an oracle table. This is done with Template mapping and I selected an Load code template on the execution unit that holds only the external table, this load code template will read row by row from source table and make the inserts into the flow table. I know that oracle use odiRef.getFrom() in order to construct the select statement from the external table. Because i need to do something custom i will need to have a list of the source tables inside the Load code template.
Is this possible?
P.S. I use owb 11gr2.
Regards,
Cipi
Edited by: Iancu Ciprian on Jan 11, 2011 10:58 AM

Hi Suraj,
Thx for your answer!
After posting the message i found in ODI documentation about odiRef other function and this I'm trying now to see if works, will let you know my results ...
I implemented an custom iterator that retrieves the data from an external source and pass it to INSERT commands to execute against flow table. In order that this iterator to work i need the source table name of the current execution unit. Then the iterator is using the that name to get the data from the external entity and retrieve it as an array of Objects, this array of objects will be inserted in the flow table.
Regards,
Cipi

How to get source table name according to target table

hi all
another question:
once a map was created and deployed,the corresponding information was stored in the repository and rtr repository.My question is how to find the source table name according to the target table,and in which table these records are recorded.
somebody help me plz!!
thanks a lot!

This is a query that will get you the operators in a mapping. To get source and targets you will need some additional information but this should get you started:
set pages 999
col PROJECT format a20
col MODULE format a20
col MAPPING format a25
col OPERATOR format a20
col OP_TYPE format a15
select mod.project_name PROJECT
, map.information_system_name MODULE
, map.map_name MAPPING
, cmp.map_component_name OPERATOR
, cmp.operator_type OP_TYPE
from all_iv_xform_maps map
, all_iv_modules mod
, all_iv_xform_map_components cmp
where mod.information_system_id = map.information_system_id
and map.map_id = cmp.map_id
and mod.project_name = '&Project'
order by 1,2,3
Jean-Pierre

How to get source table name

Hi,
I need to know how get a source table name. I need to get a source table name and do some transformation. I am adding the step in IKM to do this and therefore need source table name in there.
<%=odiRef.getSrcTablesList("","[RES_NAME]","","")%> gives work table name (C$_0XXXXX) whereas actual source table name is expected.
Could someone please help?
Thanks.

Hi,
May i add a point?
In IKM level, if u use this API it will always return u C$ table name only since for IKM C$ is the source. You need to capture and use this API in LKM level.
In LKM add a step in Command on target and technology as Jython and try the below code.
mySourceTable= '<%=odiRef.getSrcTablesList("", "[RES_NAME]", ", ", "")%>'
And later in IKM use this variable for ur transformation.
Thanks,
Guru

Paused for Flow Control but no flow occurring

10.2.0.2
Our destination database had problems this AM and it was bounced. The capture process on the source went into "Paused for Flow Control" status and never recovered. Here's the process I went through.
1. There was nothing being propagated according to v$propagation_sender.
2. The apply process was running but was not receiving any messages according to v$streams_apply_reader, v$streams_apply_server
3. I stopped and restarted the apply process - no change.
4. I stopped and restarted the capture process and after the dictionary initilization it went back into the paused state.
5. alter logs showed nothing for either database.
6. dbms_propagation_adm.stop_propagation resulted in an ORA-24082
I finally had to run dbms_propagation_adm.stop_propagation with force=>true and restart it for data to start flowing again, albeit slowly.
So the question is - why? Why did I have to forcefully stop the propagation process and restart it when this is all supposed to be seamless? Is this expected behavior that others have run into and the proces you need to perform whenever your destination becomes unavailable for a time period?
Just curious.
Thanks - Brian

I've tried setting up a Streams for schema replication and have run into the "Paused for Flow Control issue". I'm not getting any streams errors so i don't know what's wrong with it.
I'm not that familiar with Streams so i'm not sure where to start to diagnose the problem. I used the Enterprise Manager to set up the streams and tried stopping and restarting the capture process but i'm still getting the "Paused for Flow Control issue". Where is the best place to start to look for a solution?
Thanks!

MERGE Statement - unable to get a stable set of rows in the source tables

OWB Client: 10.1.0.2.0
OWB Repository: 10.1.0.1.0
I am trying to create a MERGE in OWB.
I get the following error:
ORA-12801: error signaled in parallel query server P004 ORA-30926: unable to get a stable set of rows in the source tables
I have read the other posts regarding this and can't seem to get a fix.
The target table has a unique index on the field that I am matching on.
The "incoming" data doesn't have a unique index, but I have checked and confirmed that it is unique on the appropriate key.
The "incoming" data is created by a join and filter in the mapping and I'd rather avoid having to load this data into a new table and add a unique index on this.
Any help would be great.
Thanks
Laura

Hello Laura,
The MERGE statement does not require any constraints on its target table or source table. The only requirement is that two input rows cannot update the same target row, meaning that all existing target rows can be matched by at most one input row (otherwise the MERGE would be undeterministic since you don't know which of the input rows you would end up with in the target).
If a table takes ages to load (and is not really big) I suspect that your mapping is not running in set mode and that it performs a full table scan on source data for each target row it produces.
If you ARE running in set mode you should run explain plan to get a hint on what is wrong.
Regarding your original mapping, try to set the target operator property:
Match by constraint=no constraints
and then check the Loading properties on each target column.
Regards, Hans Henrik

Unable get the table scroll for table control

hai
i unable get horizontal scrolling for table control when the output is dislayed
help me
very urgent

Hi,
check out the sample program it might help you
See the following simple ex
*& Module pool ZTEST_TBLCTRL
PROGRAM ZTEST_TBLCTRL.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'TC1'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES: ZFG_SRNO, ZFIH0004.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'TC1'
*TYPES: BEGIN OF T_TC1,
ZSRNO LIKE ZFG_SRNO-ZSRNO,
SCRNAME LIKE ZFIH0004-SCRNAME,
END OF T_TC1.
*TYPES: BEGIN OF T_TC1.
STRUCTURE ZFG_SRNO.
END OF T_TC1.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'TC1'
*DATA: G_TC1_ITAB TYPE T_TC1 OCCURS 0 WITH HEADER LINE,
G_TC1_WA TYPE T_TC1. "work area
DATA: G_TC1_ITAB LIKE ZFG_SRNO OCCURS 0 WITH HEADER LINE,
G_TC1_WA LIKE G_TC1_ITAB. "work area
DATA: G_TC1_COPIED. "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'TC1' ITSELF
CONTROLS: TC1 TYPE TABLEVIEW USING SCREEN 0100.
*&SPWIZARD: LINES OF TABLECONTROL 'TC1'
DATA: G_TC1_LINES LIKE SY-LOOPC.
DATA: OK_CODE LIKE SY-UCOMM,
S_CODE LIKE SY-UCOMM,
MARK.
DATA: T1(10).
*&SPWIZARD: OUTPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: COPY DDIC-TABLE TO ITAB
MODULE TC1_INIT OUTPUT.
IF G_TC1_COPIED IS INITIAL.
*&SPWIZARD: COPY DDIC-TABLE 'ZFG_SRNO'
*&SPWIZARD: INTO INTERNAL TABLE 'g_TC1_itab'
SELECT * FROM ZFG_SRNO
INTO CORRESPONDING FIELDS
OF TABLE G_TC1_ITAB.
G_TC1_COPIED = 'X'.
REFRESH CONTROL 'TC1' FROM SCREEN '0100'.
IF T1 <> SPACE.
G_TC1_ITAB-ZSRNO = T1.
CLEAR T1.
APPEND G_TC1_ITAB.
REFRESH CONTROL 'TC1' FROM SCREEN '0100'.
ENDIF.
*TC1-TOP_LINE = 1.
ENDIF.
ENDMODULE.
*&SPWIZARD: OUTPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MOVE ITAB TO DYNPRO
MODULE TC1_MOVE OUTPUT.
MOVE-CORRESPONDING G_TC1_WA TO ZFG_SRNO.
if sy-subrc ne 0.
*append G_TC1_WA to G_TC1_ITAB.
*endif.
READ TABLE G_TC1_ITAB INDEX TC1-CURRENT_LINE.
IF SY-SUBRC = 0.
G_TC1_WA-ZSRNO = G_TC1_ITAB-ZSRNO.
ENDIF.
MOVE-CORRESPONDING G_TC1_ITAB TO ZFG_SRNO.
REFRESH CONTROL 'TC1' FROM SCREEN '8001'.
*******Below line is the logic for scrolling.
tc1-lines = G_TC1_LINES + 100.
ENDMODULE.
*&SPWIZARD: OUTPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: GET LINES OF TABLECONTROL
MODULE TC1_GET_LINES OUTPUT.
G_TC1_LINES = SY-LOOPC.
ENDMODULE.
*&SPWIZARD: INPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MODIFY TABLE
MODULE TC1_MODIFY INPUT.
*break-point.
MOVE-CORRESPONDING ZFG_SRNO TO G_TC1_ITAB.
MODIFY G_TC1_ITAB INDEX TC1-CURRENT_LINE.
G_TC1_COPIED = 'X'.
REFRESH CONTROL 'TC1' FROM SCREEN '8001'.
MOVE-CORRESPONDING ZFG_SRNO TO G_TC1_WA.
MODIFY G_TC1_ITAB
FROM G_TC1_WA
INDEX TC1-CURRENT_LINE.
G_TC1_COPIED = 'X'.
if sy-subrc ne 0.
append G_TC1_WA to G_TC1_ITAB.
endif.
*modify G_TC1_ITAB INDEX TC1-CURRENT_LINE.
ENDMODULE.
*&SPWIZARD: INPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: PROCESS USER COMMAND
MODULE TC1_USER_COMMAND INPUT.
OK_CODE = SY-UCOMM.
PERFORM USER_OK_TC USING 'TC1'
'G_TC1_ITAB'
'FLAG'
CHANGING OK_CODE.
SY-UCOMM = OK_CODE.
ENDMODULE.
INCLUDE TABLECONTROL_FORMS *
*& Form USER_OK_TC *
FORM USER_OK_TC USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME
P_MARK_NAME
CHANGING P_OK LIKE SY-UCOMM.
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA: L_OK TYPE SY-UCOMM,
L_OFFSET TYPE I.
&SPWIZARD: END OF LOCAL DATA----
*&SPWIZARD: Table control specific operations *
*&SPWIZARD: evaluate TC name and operations *
SEARCH P_OK FOR P_TC_NAME.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
L_OFFSET = STRLEN( P_TC_NAME ) + 1.
L_OK = P_OK+L_OFFSET.
*&SPWIZARD: execute general and TC specific operations *
CASE L_OK.
WHEN 'INSR'. "insert row
PERFORM FCODE_INSERT_ROW USING P_TC_NAME
P_TABLE_NAME.
CLEAR P_OK.
WHEN 'DELE'. "delete row
PERFORM FCODE_DELETE_ROW USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME.
CLEAR P_OK.
WHEN 'P--' OR "top of list
'P-' OR "previous page
'P+' OR "next page
'P++'. "bottom of list
PERFORM COMPUTE_SCROLLING_IN_TC USING P_TC_NAME
L_OK.
CLEAR P_OK.
WHEN 'L--'. "total left
PERFORM FCODE_TOTAL_LEFT USING P_TC_NAME.
WHEN 'L-'. "column left
PERFORM FCODE_COLUMN_LEFT USING P_TC_NAME.
WHEN 'R+'. "column right
PERFORM FCODE_COLUMN_RIGHT USING P_TC_NAME.
WHEN 'R++'. "total right
PERFORM FCODE_TOTAL_RIGHT USING P_TC_NAME.
WHEN 'MARK'. "mark all filled lines
PERFORM FCODE_TC_MARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
CLEAR P_OK.
WHEN 'DMRK'. "demark all filled lines
PERFORM FCODE_TC_DEMARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
CLEAR P_OK.
WHEN 'SASCEND' OR
'SDESCEND'. "sort column
PERFORM FCODE_SORT_TC USING P_TC_NAME
l_ok.
ENDCASE.
ENDFORM. " USER_OK_TC
*& Form FCODE_INSERT_ROW *
FORM fcode_insert_row
USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_LINES_NAME LIKE FELD-NAME.
DATA L_SELLINE LIKE SY-STEPL.
DATA L_LASTLINE TYPE I.
DATA L_LINE TYPE I.
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE CXTAB_CONTROL.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <LINES> TYPE I.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: get looplines of TableControl *
CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_LINES_NAME.
ASSIGN (L_LINES_NAME) TO <LINES>.
*&SPWIZARD: get current line *
GET CURSOR LINE L_SELLINE.
IF SY-SUBRC <> 0. " append line to table
L_SELLINE = <TC>-LINES + 1.
*&SPWIZARD: set top line *
IF L_SELLINE > <LINES>.
<TC>-TOP_LINE = L_SELLINE - <LINES> + 1 .
ELSE.
<TC>-TOP_LINE = 1.
ENDIF.
ELSE. " insert line into table
L_SELLINE = <TC>-TOP_LINE + L_SELLINE - 1.
L_LASTLINE = <TC>-TOP_LINE + <LINES> - 1.
ENDIF.
*&SPWIZARD: set new cursor line *
L_LINE = L_SELLINE - <TC>-TOP_LINE + 1.
*&SPWIZARD: insert initial line *
INSERT INITIAL LINE INTO <TABLE> INDEX L_SELLINE.
<TC>-LINES = <TC>-LINES + 1.
*&SPWIZARD: set cursor *
SET CURSOR LINE L_LINE.
ENDFORM. " FCODE_INSERT_ROW
*& Form FCODE_DELETE_ROW *
FORM fcode_delete_row
USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME
P_MARK_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: delete marked lines *
DESCRIBE TABLE <TABLE> LINES <TC>-LINES.
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
IF <MARK_FIELD> = 'X'.
DELETE <TABLE> INDEX SYST-TABIX.
IF SY-SUBRC = 0.
<TC>-LINES = <TC>-LINES - 1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " FCODE_DELETE_ROW
*& Form COMPUTE_SCROLLING_IN_TC
text
-->P_TC_NAME name of tablecontrol
-->P_OK ok code
FORM COMPUTE_SCROLLING_IN_TC USING P_TC_NAME
P_OK.
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TC_NEW_TOP_LINE TYPE I.
DATA L_TC_NAME LIKE FELD-NAME.
DATA L_TC_LINES_NAME LIKE FELD-NAME.
DATA L_TC_FIELD_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <LINES> TYPE I.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get looplines of TableControl *
CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_TC_LINES_NAME.
ASSIGN (L_TC_LINES_NAME) TO <LINES>.
*&SPWIZARD: is no line filled? *
IF <TC>-LINES = 0.
*&SPWIZARD: yes, ... *
L_TC_NEW_TOP_LINE = 1.
ELSE.
*&SPWIZARD: no, ... *
CALL FUNCTION 'SCROLLING_IN_TABLE'
EXPORTING
ENTRY_ACT = <TC>-TOP_LINE
ENTRY_FROM = 1
ENTRY_TO = <TC>-LINES
LAST_PAGE_FULL = 'X'
LOOPS = <LINES>
OK_CODE = P_OK
OVERLAPPING = 'X'
IMPORTING
ENTRY_NEW = L_TC_NEW_TOP_LINE
EXCEPTIONS
NO_ENTRY_OR_PAGE_ACT = 01
NO_ENTRY_TO = 02
NO_OK_CODE_OR_PAGE_GO = 03
OTHERS = 0.
ENDIF.
*&SPWIZARD: get actual tc and column *
GET CURSOR FIELD L_TC_FIELD_NAME
AREA L_TC_NAME.
IF SYST-SUBRC = 0.
IF L_TC_NAME = P_TC_NAME.
*&SPWIZARD: et actual column *
SET CURSOR FIELD L_TC_FIELD_NAME LINE 1.
ENDIF.
ENDIF.
*&SPWIZARD: set the new top line *
<TC>-TOP_LINE = L_TC_NEW_TOP_LINE.
ENDFORM. " COMPUTE_SCROLLING_IN_TC
*& Form FCODE_TC_MARK_LINES
marks all TableControl lines
-->P_TC_NAME name of tablecontrol
FORM FCODE_TC_MARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME.
&SPWIZARD: EGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: mark all filled lines *
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
<MARK_FIELD> = 'X'.
ENDLOOP.
ENDFORM. "fcode_tc_mark_lines
*& Form FCODE_TC_DEMARK_LINES
demarks all TableControl lines
-->P_TC_NAME name of tablecontrol
FORM FCODE_TC_DEMARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: demark all filled lines *
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
<MARK_FIELD> = SPACE.
ENDLOOP.
ENDFORM. "fcode_tc_mark_lines
*& Module D20XX_INIT OUTPUT
text
MODULE D20XX_INIT OUTPUT.
*if screen-name = 'ZSRNO'.
SCREEN-INPUT = 0.
SCREEN-COLOR = 0.
MODIFY SCREEN.
endif.
ENDMODULE. " D20XX_INIT OUTPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
*CLEAR R1_REF.
DO 30 TIMES.
APPEND G_TC1_ITAB.
ENDDO.
DESCRIBE TABLE G_TC1_ITAB LINES TC1-LINES.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module TAB1_INIT OUTPUT
text
MODULE TAB1_INIT OUTPUT.
ENDMODULE. " TAB1_INIT OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module MESSAGE INPUT
text
MODULE MESSAGE INPUT.
OK_CODE = SY-UCOMM.
S_CODE = OK_CODE.
CLEAR OK_CODE.
if S_CODE = 'DELE'.
loop at G_TC1_ITAB.
if G_TC1_ITAB-scrname = 'X'.
delete g_tc1_itab.
endif.
endloop.
ELSEIF S_CODE = 'SAVE'.
G_TC1_WA-ZSRNO = T1.
MOVE-CORRESPONDING G_TC1_WA TO ZFG_SRNO.
REFRESH CONTROL 'TC1' FROM SCREEN '0100'.
ENDIF.
ENDMODULE. " MESSAGE INPUT
*& Module DELETE_RECORD INPUT
text
MODULE DELETE_RECORD INPUT.
IF MARK = 'X' AND S_CODE = 'DELE'.
DELETE TABLE G_TC1_ITAB FROM ZFG_SRNO.
DESCRIBE TABLE G_TC1_ITAB LINES TC1-LINES.
ENDIF.
ENDMODULE. " DELETE_RECORD INPUT
*********************Screen modules*********************
PROCESS BEFORE OUTPUT.
*&SPWIZARD: PBO FLOW LOGIC FOR TABLECONTROL 'TC1'
MODULE TC1_INIT.
*&SPWIZARD: MODULE TC1_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TC1_CHANGE_COL_ATTR.
LOOP AT G_TC1_ITAB
INTO G_TC1_WA
WITH CONTROL TC1
CURSOR TC1-CURRENT_LINE.
*&SPWIZARD: MODULE TC1_CHANGE_FIELD_ATTR
MODULE TC1_MOVE.
MODULE TAB1_INIT.
MODULE TC1_GET_LINES.
ENDLOOP.
MODULE D20XX_INIT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
*&SPWIZARD: PAI FLOW LOGIC FOR TABLECONTROL 'TC1'
*BREAK POINT.
LOOP AT G_TC1_ITAB.
CHAIN.
FIELD ZFG_SRNO-ZSRNO.
MODULE TC1_MODIFY ON CHAIN-REQUEST.
MODULE TC1_MODIFY.
ENDCHAIN.
MODULE MESSAGE .
MODULE DELETE_RECORD.
ENDLOOP.
MODULE TC1_USER_COMMAND.
*&SPWIZARD: MODULE TC1_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TC1_CHANGE_COL_ATTR.
MODULE USER_COMMAND_0100.
please check out the link below for more information it might help you
http://help.sap.com/saphelp_sm32/helpdata/en/9f/dbac9f35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d1/801c7b454211d189710000e8322d00/content.htm
http://www.sapbrainsonline.com/REFERENCES/ABAP_SYNTAX/SAP_ABAP_SYNTAX.html
*********please reward points if the information is helpful to you*************

ORA-30926: unable to get a stable set of rows in the source tables

hi,
I am loading data from source table to target table in a interface.
Using LKM incremental update .
In the merge rows step , getting the below error.
30926 : 99999 : java.sql.SQLException: ORA-30926: unable to get a stable set of rows in the source tables
please help as what should be done to resolve this.

Below is the query in the merge step...
when i run from SQL also, same error
SQL Error: ORA-30926: unable to get a stable set of rows in the source tables
30926. 00000 - "unable to get a stable set of rows in the source tables"
*Cause:    A stable set of rows could not be got because of large dml
activity or a non-deterministic where clause.
*Action:   Remove any non-deterministic where clauses and reissue the dml.
merge into     TFR.INVENTORIES T
using     TFR.I$_INVENTORIES S
on     (
          T.ORGANIZATION_ID=S.ORGANIZATION_ID
     and          T.ITEM_ID=S.ITEM_ID
when matched
then update set
     T.ITEM_TYPE     = S.ITEM_TYPE,
     T.SEGMENT1     = S.SEGMENT1,
     T.DESCRIPTION     = S.DESCRIPTION,
     T.LIST_PRICE_PER_UNIT     = S.LIST_PRICE_PER_UNIT,
     T.CREATED_BY     = S.CREATED_BY,
     T.DEFAULT_SO_SOURCE_TYPE     = S.DEFAULT_SO_SOURCE_TYPE,
     T.MATERIAL_BILLABLE_FLAG     = S.MATERIAL_BILLABLE_FLAG,
     T.LAST_UPDATED_BY     = S.LAST_UPDATED_BY
     ,T.ID     = TFR.INVENTORIES_SEQ.NEXTVAL,
     T.CREATION_DATE     = CURRENT_DATE,
     T.LAST_UPDATE_DATE     = CURRENT_DATE
when not matched
then insert
     T.ORGANIZATION_ID,
     T.ITEM_ID,
     T.ITEM_TYPE,
     T.SEGMENT1,
     T.DESCRIPTION,
     T.LIST_PRICE_PER_UNIT,
     T.CREATED_BY,
     T.DEFAULT_SO_SOURCE_TYPE,
     T.MATERIAL_BILLABLE_FLAG,
     T.LAST_UPDATED_BY
     ,T.ID,
     T.CREATION_DATE,
     T.LAST_UPDATE_DATE
values
     S.ORGANIZATION_ID,
     S.ITEM_ID,
     S.ITEM_TYPE,
     S.SEGMENT1,
     S.DESCRIPTION,
     S.LIST_PRICE_PER_UNIT,
     S.CREATED_BY,
     S.DEFAULT_SO_SOURCE_TYPE,
     S.MATERIAL_BILLABLE_FLAG,
     S.LAST_UPDATED_BY
     ,TFR.INVENTORIES_SEQ.NEXTVAL,
     CURRENT_DATE,
     CURRENT_DATE
     )

MERGE error : unable to get a stable set of rows in the source tables

Hi,
For an update, the following MERGE statement throws the error-unable to get a stable set of rows in the source tables:
MERGE INTO table2t INT
USING (SELECT DISTINCT NULL bdl_inst_id,.......
FROM table1 ftp
WHERE ftp.gld_business_date = g_business_date
AND ftp.underlying_instrument_id IS NOT NULL) ui
ON ( ( INT.inst_id = ui.inst_id
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.ric = ui.ric
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.isin = ui.isin
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.sedol = ui.sedol
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.cusip = ui.cusip
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
WHEN MATCHED THEN
UPDATE
SET INT.inst_id = ui.inst_id, INT.ric = ui.ric
WHEN NOT MATCHED THEN
INSERT (inst_key, ......)
VALUES (inst_key, ......);
To determine the existence of a record, first check if any match is found on the first key, if not then search for the second key and so on.
Now two records with differenct first key, i.e. inst_id, can have the same ric(second key). On a rerun, with the target table already populated, the code fails. The reason is it finds duplicate entries for the second key.
Any suggestions on how to make this work?
Thanks in advance.
Annie

Annie
You've spotted the problem (that two records have the same RIC). MERGE doesn't allow that; each record in the data being updated is only allowed to be updated once.
Is there a PK column (or columns) that we can rely on?
What you can try is to outer join FTP to INT. Something like:
MERGE INTO INT int1
USING (
    select columns_you_need
    from (
        select ftp.columns -- whatever they are
               , int2.columns
               , row_number() over (partition by int2.pk_columns order by int2.somecolumns) as rn
        from   ftp
        left join int int2
        on (the condition you used in your query)
    where rn=1
) s
WHEN MATCHED THEN UPDATE ...
WHEN NOT MATCHED THEN INSERT ...So if you can restrict the driving query so that only the first one of the possible updates actually gets presented to the MERGE operation, you might be in with a chance :-)
And of course this error is nothing to do with any triggers.
HTH
Regards Nigel

ORA-30926: unable to get a stable set of rows in the source table

When user are trying to open a form getting below error.
com.retek.platform.exception.RetekUnknownSystemException:ORA-30926: unable to get a stable set of rows in the source tables
Please advice
Edited by: user13382934 on Jul 9, 2011 1:32 PM

Please try this
create table UPDTE_DEFERRED_MAILING_RECORDS nologging as
SELECT distinct a.CUST_ID,
a.EMP_ID,
a.PURCHASE_DATE,
a.drank,
c.CONTACT_CD,
c.NEW_CUST_CD,
a.DM_ROW_ID
FROM (SELECT a.ROWID AS DM_ROW_ID,
a.CUST_ID,
a.EMP_ID,
a.PURCHASE_DATE,
dense_rank() over(PARTITION BY a.CUST_ID, a.EMP_ID ORDER
BY a.PURCHASE_DATE DESC, a.ROWID) DRANK
FROM deferred_mailing a) a,
customer c
WHERE a.CUST_ID = c.CUST_ID
AND a.EMP_ID = c.EMP_ID
AND (a.PURCHASE_DATE <= c.PURCHASE_DATE OR
c.PURCHASE_DATE IS NULL)
and a.drank=1;
The query you've posted is behaving according to the expectations. The inner select is returning one row and the outer is returning two as the
WHERE a.CUST_ID = c.CUST_ID
AND a.EMP_ID = c.EMP_ID
AND (a.PURCHASE_DATE <= c.PURCHASE_DATE OR
c.PURCHASE_DATE IS NULL)
conditions are seeing two rows in the table customer.
I've added the a.drank=1 clause to skip the duplicates from the inner table and distinct in the final result to remove duplicates from the overall query result.
For eg, if you have one more row in the deferred_mailing like this
SQL> select * from DEFERRED_MAILING;
CUST_ID EMP_ID PURCHASE_
444 10 11-JAN-11
444 10 11-JAN-11
then the query without "a.drank=1" will return 4 rows like this by the outer query.
CUST_ID EMP_ID PURCHASE_ DM_ROW_ID DRANK C N
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
It'll return the below even if we use distinct on the same query(i.e. without a.drank=1)
CUST_ID EMP_ID PURCHASE_ DM_ROW_ID DRANK C N
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
which contains duplicates again.
So, we need a combination of distinct and dense here.
btw, Please mark the thread as 'answered', if you feel you got your question answered. This will save the time of others who search for open questions to answer.
Regards,
CSM

Ora-30926 : unable to get a stable set of rows in source table

Dear All
When I try to load my cube I get the error "ora-30926 : unable to get a stable set of rows in source table".
Any idea? Googling for this error did not return any solutions.
My env:
source: Oracle 10g (10.2.x)
Target: Oracle 11g (11.1.0.7)
I am using warehouse builder 11.1.0.7 on Linux
thank you

Carsten / neashton
Thanks for your help. Duplicate rows were the issue.
I finally debugged the problem to my time dimension.
The OWB wizard generated time dimension contains only date, but no time.
Unfortunately, for me to uniquely identify my data, I need to include time also (detailed in how do I include 'Time' in a time dimension? .
Since Carsten was the first one to answer this, I am awarding the points to him.
thanks a lot both of you
Edited by: T2 on Jun 2, 2009 4:01 AM

Best approach to get the source tables into Target

Hi
I am new to Goldengate and I would like to know what is the best approach to get the Source tables to be replicated into the target (oracle to oracle) before performing the initial load without using exp/expdp . Is there any native Goldengate utility which i can use during the initial load or before that will create the tables on the target before loading the data ?
Thanks

i dont think so, for the initial load replication your struncture should be available at target machine. once your machines are in sync then you can use goldengate ddl setup for automatically replicate the table with data.
Batter approach for you to create a structure on target machine using export improt. In export use conect=metadata_only for copy the structure only.....
like
EXPDP <<user>>/<<password>>@connection_string schemas=abc directory=TEST_DIR dumpfile= gg.dmp Content = metadata_only logfile= gg.log

Source table has an xml column that I need to query before splitting into 2 tables.

Hi
I have a source table with an xml column that I need to query on the nodes and then depending on what data is in the node then to split it into 2 different tables. I don't think I can use conditional split so I am looking at just a straight Execute SQL Task.
Has anyone got any ideas on any other way of doing this?
Thanks for the help in advance.
Dave

Hi TheDish,
Your goal arguably can me accomplished using pure T-SQL only encompassing XPath or XQuery.
E.g. the XQuery would retrieve the nodes as explained in http://sqljudo.wordpress.com/2013/12/02/xpath-for-the-sql-server-dba/
And then you may want to use the WHERE clause to extract - insert the nodes that go to one or another table.
I don't see why SSIS is necessary, but you can run the same queries in two Data Sources, or Execute SQL Tasks (that capture a resultset).
Arthur
MyBlog
Twitter

Row should get added in the target as soon as the data in the source table

I have done the following:
* The source table is part of the CDC process.
* I have started the journal on the source table.
Whenever I change the data in the source, I expect the target to get a new row added with a new sequence number as the surrogate key. I find that even though the source data changes, the new row does not get added.
Could someone point out to me why is the new row not getting added?

Step 1 - Sequence Number
create a sequence in your rdbms namely
CREATE SEQUENCE SEQUENCE_NAME
MINVALUE 1
MAXVALUE 99999
START WITH 1
INCREMENT BY 1
YOU can use the above sequence in your mapping in this way
schema_name.sequence_name.nextval executed on Target option .
Next select only Insert option for sequence column .
Click on the Source datastore and in the Properties panel you will find an option called " Journalized Data Only " . Now whenever this interface runs , only the journalized data gets transferred.
The other way to see the journalized data from the source side is right click on the source datastore under the model which is journalized and now go to " changed data capture " and then to " journal data .. "
Now you can see only the journzalied data.
As CDC creates as trigger at the source , so whenever there is change in the source it gets captured at the target whenver you run the interface above interface with Journalized data only option.
I hope iam clear and elaborate now.
Thanks

Re: getting the source tables into models in designer

Hi all
i need help while extracting the source table's to ODI designer
my source: Oracle
Question:
i have given the source schema information. with that information i created logical and physical schema in topology manager.
And trying to create a model to extract source tables to ODI.
As i don't have all tables in the same schema (some tables were coming from different users and i don't have the information of those users) am unable to see the those tables when in selective reverse tab.
i requested them to give select privileges for those tables in the schema which am using.
after getting the select privileges for those tables.
will i would be able to see those tables in selective reverse tab?
Could some one guide me steps in this.
Thanks

917704 wrote:
Hi Alastair
firstly thank you for your reply.
my soure is oracle erp.
i cannot create physical/logical schemas for that user bez as it is head user in oracle erp, i dont have the access for that user.Hi, I've done change data capture from ebusiness suite using ODI, what we did was this :
get a 'read only' database account set up in the ebiz suite database, this is your connecting user and your work schema (for CDC objects).
grant select any table, or be more specific if you wish on the objects you need to read data from to ODI, then connect as your read only user but map the physical schemas as you wish.
Back to your original question, a model can only have one logical schema, which in turn maps to one phyiscal schema - so I think your stuck needing to read across more than one schema on the source system.

Get source table (xml) constraint in flow control constraint/snp_check_tab

Similar Messages

Maybe you are looking for