Paused for Flow Control but no flow occurring
10.2.0.2
Our destination database had problems this AM and it was bounced. The capture process on the source went into "Paused for Flow Control" status and never recovered. Here's the process I went through.
1. There was nothing being propagated according to v$propagation_sender.
2. The apply process was running but was not receiving any messages according to v$streams_apply_reader, v$streams_apply_server
3. I stopped and restarted the apply process - no change.
4. I stopped and restarted the capture process and after the dictionary initilization it went back into the paused state.
5. alter logs showed nothing for either database.
6. dbms_propagation_adm.stop_propagation resulted in an ORA-24082
I finally had to run dbms_propagation_adm.stop_propagation with force=>true and restart it for data to start flowing again, albeit slowly.
So the question is - why? Why did I have to forcefully stop the propagation process and restart it when this is all supposed to be seamless? Is this expected behavior that others have run into and the proces you need to perform whenever your destination becomes unavailable for a time period?
Just curious.
Thanks - Brian
I've tried setting up a Streams for schema replication and have run into the "Paused for Flow Control issue". I'm not getting any streams errors so i don't know what's wrong with it.
I'm not that familiar with Streams so i'm not sure where to start to diagnose the problem. I used the Enterprise Manager to set up the streams and tried stopping and restarting the capture process but i'm still getting the "Paused for Flow Control issue". Where is the best place to start to look for a solution?
Thanks!
Similar Messages
-
Streams Help - Stuck in PAUSED FOR FLOW CONTROL
Hi All,
I am brand new to Streams and i'm trying to configure streams between two db's on different machines on the same network. Initially i was getting errors trying to connect to the remote database during Propagation(ORA-02019 connection description for remote database not found ). I think this was due to my db link being created incorrectly. I recreated my db link and i'm no longer getting those messages.
Now everything on my Source db looks like it's running except the Capture state is stuck in PAUSED FOR FLOW CONTROL and nothing is being propagated. The propagation process is enabled and i can see it in the dba_jobs views. I have never gotten this working yet.
Does anyone have general troublshooting tips for this. I have found detailed instructions on how to setup the stream but not much on how to troubleshoot.
Any advise would be greatly appreciated.
nullThis error was due to a 'bad' database link. I'm still not positive why the link was bad but i recreated my db link and tested. After i confirmed it was active I re-setup my capture and propagation processes and all is good now.
thanks, dave -
Wanted Computer Controled Electronic Cards with Software for Motion Control
Hi everybody
Already worked on designing a cnc table to cut sheet materials.
But we don't know enough for electronics. We think a system which is
software driven from pc. So, we look for Wanted Computer Controled
Electronic Cards with Software for Motion Control but we don't know more
which motors, electronic cards and control panel we have to use.
Please help me. Thanks.
Atilla KESKEKLER
Ahmet Bayman Cad. No 10/4 Otosanayi 4.Levent 80650 Istanbul Turkiye
Tel: + 90 212 270 74 00 Fax: + 90 212 270 75 89
www.aareklam.com.tr [email protected]Dear Atilla,
You should contact AutomationSolutions (www.AutomationSolutions.com) to receive help with designing your system. They can spec your motors and help you picking the correct controllers and drivers from National Instruments to control the motors that you want to use. Please let me know if you need more information about the capabilities of Motion Control systems from National Instruments.
Thank You,
Morten Jensen
National Instruments -
Switch Sign For Flow and Switch Type for Flow
Hi Can any one Please make me clear at least with 3 examples how to understand Switch Sign for Flow and Switch Type for Flow
and also the good example with Balance Recurring Account TypesHi Chennai,
Consider an account "Fixed-Assets" supported by movement analysis in Custom1, as follows:
ClosingBalance
OpeningBalance
Additions
Disposals
If you mark the Custom1 member Disposals as SwitchSignForFlow, you will enter positive values in Disposals but HFM will subtract from the other two members to calculate the Closing Balance. You may use this functionality if your client prefers to see all values as positive on the reports.
Using the same example, you might recognize that while Closing and Opening balances are of balance type (they provide a snapshot of the account at a specific instant meaning that you see the same number whether you view the YTD or Periodic values of the account), Additions and Disposals are movements, which means that they accumulate during the same year starting from a zero balance on 1/1/201X and therefore you will see different numbers depending on viewing the YTD or Periodic values of the account. In order to provide with this behavior you have to mark both Additions and Disposals with SwitchTypeForFlow. If you don't they will behave as the underlying account (the Fixed-Assets account) and like the other two Custom1 members, Opening and Closing balance members.
As for the BalanceReccuring, an account of this type behaves like a normal Balance account, but once you input a number in an intermediate period (say June), the same number will be copied to all following periods (July-December) until you override the numbers by explicitly inputting new values. With a normal balance account, all following periods will be empty.
--Kostas -
Just downloaded PDF Editor Pro, version 3.7.0, but it wasn't working. I checked for updates; none, but it showed "an error has occurred." What do I do?
You should check the developer's website.
-
I paused the movie download but did not turn off my IPad. When I returned to complete the download, the "waiting" message has been on the screen for over an hour. How can I complete the download?
I recommend purchasing lion on a USB drive at Apple Store. This will avoid all of the downloading hassles.
Also, be sure you clone your hard drive first. A lot of people want to go back to Snow Leopard and if you choose to do this cloning will make the process very easy. -
Whenever I try to download the newest itunes software, I am sent to the "Thank you for dowloading itunes" page, but no download occurs.
you can try this thread maybe? https://discussions.apple.com/message/16217061#16217061
-
I follow the instructions of swiping up from the bottom for the control panel, but nothing appears. What am I doing wrong or what do I need to be turned on or off?
"If you're on your home screen, where your apps and folders are, you can't."
I can on mine.
For anyone having this issue, take your device out of the case and try it naked before trying a reset, restore or Genius Bar appointment. -
I have just rented a film and clicked the menu button instead of pause. When I go back to the film to rent again it says I have already rented this go to settings and check for downloads. But there is no download option in settings?
It does... Apple TV has a problem with the assignment to the itunes account after updating. Restore to factory settings or unlog and news login to the itunes store helps to see the rented/downloaded film(s).
-
This may be more of a SQL Server Management Studio question, but I couldn't find a SSMS forum...
I've got a database solution that contains several projects. They're just to keep track of changes to stored procedures, triggers, views, etc in a few databases I maintain. There is a problem with two of the projects though. No matter what I do, I can't seem to get them bound to source control right. When I open the solution, I get:
The project file is not bound to source control, but the solution contains source control binding information for it.
With two options, use solution binding and remove solution binding. If I keep the solution binding, everything works fine. But it's really annoying to have to deal with every time I open the solution. If I remove the solution binding, the projects are now unbound again. If I try to fix them (using the change source control or Add Selected Projects to Source Control options under the File->source control menu), I just end up in the same situation. I've even tried deleting the projects and re-creating them from scratch, then re-adding them to VSS. If I open the solution files in a text editor I can see the SCC tags in every project, but these two. Since I can't manually add the tags, and Management Studio itself only seems to want to bind them the wrong way, I'm getting really frustrated.
Can anyone point me toward a way to bind these so they work like the rest?However, that does not appear to be the ONLY cause of the problem. I am a single user and only using TFS2010 and SSMS2008R2. My issue is that I wanted a solution file for each project so that they could managed independently, and a super-solution
file that contained all projects, so that I could perform system-wide searches and cross-checks.
I solved the problem by:
1. Choosing the option to use solution binding, then
2. Adding another project to the solution. This forced the re-write of the solution file.
3. Adding another script to the project. This forced the re-write of the project file.
4. Checking in all changes.
5. Deleting the new script and the extra project,
6 Checking in all changes.
This appears to have solved the problem. -
Receiving error of "an error occurred downloading content. Try again later. It's been doing that for a week but I'm able to watch other items such as YouTube etc
I posted the same sort of problem in the thread
https://discussions.apple.com/message/15562522#15562522
I noticed in my instance that it is HD content that is giving me the same problem, but Standard Definition (SD) content downloads and plays no problem.
Would this be the same with you? Have you been able to download a play an HD rented movie? -
I purchased an iBook and when I try to download it I get sent in a circle. Message pops up that it's already been purchased & I need to go to store to download but it never downloads, stays in pause mode. I have been charged for the book but can't retrieve it. I've successfully purchased books before without trouble.very frustrated
Hi Peggs,
Try this:
Open your iBooks app on your iPad
Select the Store Button at the top
Select Purchased at the bottom
You will see your AppleID on the right at the bottom, then Redeem, then Support
Click on your Apple ID, and when the AppleID window comes up with the options, Sign Out
Then Sign In again and try redownloading your book
Hope this helps!
Cheers,
GB -
I have set up iCloud control panel 3.1 for Windows 7 but when I add contacts on my Windows 7 desktop it is not updating to my iPhone 5 and the same holds true with my Calendar. Any suggestions? Thanks
The version that came with Microsoft Office Home and Business 2010 and says Version 14.0.7106.5003 (32 Bit) and the e-mail I have set up as POP / SMTP. Thanks for your reply.
-
I would have updates for my phone but they paused like 3/4th of the way.. i would have to turn off my phone just so it could finish.. does that happen to anyone else?
The easiest thing to do is a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After that, go to the app in question and tap on it. This should restart the download and finish it, as long as you have a solid internet connection.
-
So i went and updated my iPhone 4S via the settings option from the phone, next thing it asked me to connect to iTunes, i've downloaded the new ios but i've been trying for almost 5 hours, countless problems occur, waiting for iPhone, stuck at verifying, error 0xE0000xx and so on, i've tried changing cables and redownloading iTunes, nothing seems to work. Help.
iOS: Unknown error containing '0xE' when connecting to a Windows PC
Maybe you are looking for
-
I can't create a USB bootable Windows in Boot Camp Mavericks
In Lion I was able to modify the file info.plist in the Package of bootcamp... </array> <key>PreUSBBootSupportedModels</key> <array> removing the ''Pre'' </array> <key>USBBootSupportedModels</key> <array> In Ma
-
How do I remove a program that won't close?
A program called Macprotector downloaded itself onto my Mac, will not close and cannot be deleted, because it remains open.
-
Is there any standard SAP report to see all active,inactive, retiree employ
SAP experts Is there any standard SAP report where I can look all the employees whose employment specific status is 0 (terminated), 1(employee with the company but inactive), 2(retiree), 3(active). please help regards renu
-
while startup i am having this error SQL> startup ORA-02778: Name given for the log directory is invalid any friends plz reply me
-
Z10 camera test using ISO 12233 test page. Results are excellent!
Dear users, I inspected some family pictures of my Z10 and came to a conclusion that there was something fishy with my camera. The edges and corners of the pictures seemed shaded or blurred. I've found the following site http://www.gsmarena.com/piccm