Get symbol timeline to play EVERY TIME the button is clicked?

I have an animation with a button, when the button is clicked a symbol timeline is played from a label at the beginning of the timeline.
After the button is clicked the first time it will not play the timeline again until the page is refreshed.
How can I get the button to play the symbol's timeline any time it is clicked without having to refresh the page?

Yes - you could put your buttons in a group and use $.each.  bellow is how to do it but I am sure there are other ways you could do it.
Here is an example - you have a group div called buttons that contains all your different buttons. (they can have any name since it will look for the children of the buttons div in order from bottom to top of the stack in your buttons div. I add a mouseout or mouseleave on the buttons to send the timelines back to 0.
The symbols are called symbol_1, symbol_2, etc in the example below but you could also make an array of the symbol names like var mySymbols = ['first','second','third','fourth','fifth']; and use sym.getSymbol(mySymbols[i]).play();
var buttons = sym.$("buttons").children();
$.each(buttons,function(i){
          $(this).on("click", function(){
                    sym.getSymbol('symbol_' + i).play();
$(this).on("mouseout", function(){
  sym.getSymbol('symbol_' + i).stop(0);
Below the group div is called btnSummer and had multiple buttons into it.

Similar Messages

  • After upgrading to 8.0 the add-on compatability tool runs and the Getting Started web page loads every time the browser starts.

    After upgrading to 8.0 from 7.0.1 every time I start FF I get the add-on compatibility tool to run and the Getting Started web page loads along with my homepage in separate tabs as well. So far I have tried running the installer again, disabling all add-0ns and custom settings and restarting and turning off automatic updates. Nothing worked there. I got the same behavior each time. I don't know what else to try other than a full uninstall and reinstall. Something I'd like to avoid if it's possible because of the time involved. This is the second time I have posted regarding this issue. The first time I didn't get a response. A solution or a possible workaround would be greatly appreciated if anyone knows of any. As a staff member and a global forum moderator for an anti-virus company I understand how hectic things can be at times but some feedback, good or bad, on this issue would be very welcomed! Regards, Ritchie...

    Hi michaell, thanks for the reply. I tried everything in the Preferences are not saved link you provided and nothing worked there. If creating a new profile will delete all my add-ons and custom settings I might as well just do a complete uninstall and reinstall. That actually would be easier. That article told me how to save my bookmarks though so I don't have to loose those which is nice. I don't know if this makes any difference but there is a discrepancy between the preference file in the article which is: prefs.js and what's showing on my PC which is: prefs with no .js suffix. I tried to rename the file to prefs.js and restarted. No luck there either. It just created another prefs file. I guess we've pretty much exhausted all the avenues to try! I'm just going to go ahead and do a reinstall when I get the time. Thanks so much for your help michaell. I do appreciate the effort. Regards, Ritchie...

  • I recently updated to Firefox 8 and ever since I have done that, I can't get it to open. Every time I click on the icon on my desktop to open it, it crashes. What can I do to fix this?

    I recently updated to Firefox 8 and ever since I have done that, I can't get it to open. Every time I click on the icon on my desktop to open it, it crashes. I have tried all the steps in the Firefox crashes article and I can't figure out what is wrong. How can I fix this?

    please install latest version of Roboform 7.6.2 and try
    * www.roboform.com/support/news

  • Hi i am having a problem with itunes on this computer so i had to remove it and tryed to download it again and now every time the computer comes on i get a notification which says "the program cant start because MSVCR80.dll is missing from your computer

    hi i am having a problem with itunes on this computer every time the computer comes on i get a notification which says"the program cant start because MSVCR80.dll is missing from your computer,try reinstalling the program to fix this problem" but when i click on ok it just keeps popping up 4-5 time and then gone.and i cant dopwnload the itunes again.help

    You need to work through the user tip: https://discussions.apple.com/docs/DOC-6562

  • If connect iPad to my TV every time the clip is finished I have to disconnect and reconnect the iPad for new clip playing.

    If connect iPad to my TV every time the clip is finished I have to disconnect and reconnect the iPad for new clip playing.

    1. Why don't you purchase it from Apple? I'd be wary with eBay sellers - and, after all, Apple posts their stuff everywhere, even if you live in a country without a localized Apple store webpage or local (physical) Apple stores.
    2. when it comes to adapters / cables like these, NEVER purchase ANYTHING non-Apple-manufactured! Most of the cheap(er) knock-offs don't work! That is, don't try to save on going for a cheaper alternative - it most likely won't work.
    Here are the links:
    http://store.apple.com/us/product/MD098ZM/A
    http://store.apple.com/us/product/MC552ZM/B

  • If I add artwork by dragging a jpg to the artwork area after selecting several rows, in some instances a single icon is created in the flipper;  in others one is created for each song. Why? How can I get one image per album every time?

    If I add artwork by dragging a jpg to the artwork area after selecting several rows, in some instances a single icon is created in the flipper;  in others one is created for each song. Why? How can I get one image per album every time?

    If I add artwork by dragging a jpg to the artwork area after selecting several rows, in some instances a single icon is created in the flipper;  in others one is created for each song. Why? How can I get one image per album every time?

  • Having problems us ng my ipod 7g Nike Fitness.  When running when I press the button between the volume buttons, I get a different action almost every time.

    I am having problems using my ipod 7g with Nike Fitness.  When running when I press the button between the volume buttons, I get a different action almost every time. And usually I end up either turrning volume up very high or ending the workout. I need to be able to pause workout, and get spoken feedback regarding time, distance, and pace, that's all. I'm using a Griffin brand armband, that covers all of the buttons.  I've read the online manual.  no help.  I'm just about ready to return it and go back to my 5th gen with its smaller song capacity and no blurry.  Any help or suggestions very welcome.

    Jeff:
    I have had both good and bad experiences with Acronis True Image. I got the recent copy of ATI via a Newegg.com bundle. I haven't tried it yet on any Windows 7 editing systems. ATI installs some services that I would rather not have running in the background.
    What made you change from ATI to ShadowProtect Desktop Edition?
    Are you running Windows 7?
    What do you see as advantages to running ShadowProtect Desktop Edition as opposed to Acronis True Image?
    Thanks

  • I have an Iphone 3gs. I can't get it to sync. Every time I try I get the response 'waiting for changes to be applied'. I've tried doing a reset but it still won't sync. Any ideas?

    I have an Iphone 3GS. I can't get it to sync. Every time I try I get the response 'waiting for changes to be applied'. I do not have voice memos. Any suggestions?

    This is a user forum, not a channel to address Adobe. As your fellow users and volunteers, we'll be happy to help you if we can.
    You can download the CS6 trial version just like anybody else.
    Once you download it, you can install it, input your serial number, register it and apply all necessary updates.
    An alternative, if you know how to access your Adobe account, under My Products you'll find your Photoshop CS6 registration, next to which you should find a link to download CS6 if you originally bought it as a download

  • I cannot download Mavericks. Every time the file download stops a message appears that says the file is damaged and cannot be used to install Mavericks. I delete the file, download again and the same message appears. What can I do?

    I cannot download Mavericks. Every time the file download stops a message appears that says the file is damaged and cannot be used to install Mavericks. I delete the file, download again and the same message appears. What can I do?

    I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
    I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
    Edit: I just removed every project I have from the Media Browser. Still no luck.

  • HT1692 I use an iPhone 5, and want to sync my phone calendar and contacts with Outlook 7 calendar and contacts; twpo problems--I now get dozens of new calendars every time, and my calendar will not syncd at all.; meaning that date entries on Outlook do no

    I use an iPhone 5, and want to sync my phone calendar and contacts with Outlook 7 calendar and contacts; two problems--I now get dozens of new calendars every time, and my outlook calendar will not sync at all.; meaning that date entries on Outlook do not come across ot iPhone.

    It is unusual for the calendar to sync and not the contacts in Outlook. I've worked with Outlook for years. You didn't answer what computer OS you are using. If it is Windows, have you tried to reset the sync history in iTunes? Do that by opening iTunes, go to Edit>Preferences>Devices and click on reset sync history. If you have done this and it doesn't help, then we can try and run scanpst.exe on your Outlook file and see if there are any errors. Search your computer for that file, however it normally resides in one of the Microsoft Office folders in the folder Program files. After that, you can see if it will sync.

  • TS1369 since downloading updates for itunes I get MSVCR80.dll error message every time I try to access itunes?

    Since downloading updates for itunes I get MSVCR80.dll error message every time I try to start i-tunes. can anybody help please.

    Hello aristilus2,
    Thank you for the details of the issue you are experiencing with iTunes.  I suggest removing and reinstalling iTunes for the issue you described.  The following article has steps to do this, and I recommend removing iTunes and all related componenets as outlined in the article:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I have really slow internet, i bought OS X mountain lion & tried for days to download it. my internet cuts every time & the download restarts from the beginning is thr a way to download the software as a "zip" file or from a link not app store?

    I have really slow internet, i bought OS X mountain lion & tried for days to download it. my internet cuts every time & the download restarts from the beginning is thr a way to download the software as a "zip" file or from a link not app store?

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro 
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?view=discussi ons
    http://www.apple.com/support/macbookpro
     Take it somewhere that has better broadband. The best you can do sometimes is invest in new modem that works with your system instead of the rental etc in most cases.
    Do a Safe Boot.
    Make sure your firewall is set properly. Don't use 3rd party. AV software can get in the way.
    Make sure you are getting the service and a clean strong modem signal - slow is one thing but if it drops off and can't maintain a connection you have hardware issues, not software - and upgrade to a new OS doesn't tend to improve, it may even not work with older networking equipment once you do get it.
     I agree and think electronic only goes too far. And when you do get it: burn the package and manually set it aside first before running the intaller! make a flash memory installer, put it on DVDs too.

  • How do I get a popup to appear every time a download finishes?

    How do I get a popup to appear every time a single download finishes? I want a big popup window. I want it to interrupt me as I'm watching full screen movies. In otherwords, if I download 100 different files, when the first finishes, I get a popup. Second, another popup. Third, you get the idea. I want it to be the opposite of low profile. I want it to be something I can't ignore, something that most people wouldn't want--to be annoying. Like me.

    First place I tried. I've searched online extensively. trying this as last resort. Please don't tell me where to look. I've probably already looked there. I'm hoping someone sees this and knows of an addon specifically and points me there exactly. Otherwise, posting to this question will only dilute its freshness.

  • I reset my macbook pro a few days ago.. and when i started to use it again i noticed all my apps were gone (keynote, iMovie, garage band, etc) i don't know how to get them all back and every time i try it tells me i must buy them.. what do i do?

    I reset my macbook pro a few days ago.. and when i started to use it again i noticed all my apps were gone (keynote, iMovie, garage band, etc) i don't know how to get them all back and every time i try it tells me i must buy them.. what do i do?
    should i come into the actual apple store or can you help online ?

    Hi vickkjayy11 and welcome to Apple Support Communities,
    Just to be clear, we are a peer to peer support community and have nothing official to do with Apple.
    So to your problem, when you say:
    "I reset my macbook pro a few days ago"
    What exactly happened? Did you have a Time Machine backup?
    Read this:
    OS X: About OS X Recovery - Apple Support
    It would help to know the exact model (size and year) and which OS you're using.

  • I have a year old iMac and Macbook, both on 10.7.3.  Every time the iMac goes to sleep I lose wi-fi.  No problem with the Macbook and iPad.  A lot of people seem to have the same problem.  What's the solution?

    I have a year-old iMac and Macbook, both on 10.7.3.  Every time the iMac goes to sleep I lose wi-fi from  Airport Express.  No problem with the Macbook or my iPad.  It seems a lot Mac users are having the same problem.  Is there a solution?  Does Apple have a solution?

    Sometimes there are problems.
    Somethings to try but probably won't help....
    1. Repair Disk Permissions
    2. Startup in Safe mode by holding down the "Shift" key....
    3. Reset the P Ram by holding down the "Command/Option/P/R" keys at the same time...
    The above are standard items to do on any Mac from time to time.
    I repair permissions at least once a month....
    The other 2 periodically as they do straighten things out when they get out of whack....
    Thanks for the feedback.

Maybe you are looking for

  • Keep getting "not responding" error message as DW hangs

    I have had the following problem consistently used DW 12.1, as well as the version that was with CS 5.5. And I am almost sure it has something to do with the html or other code on my pages, but I thought a DW guru might help. Basics First: DW 12.1 wi

  • How can I stop from having my volume system increasing?

    When ever I listen to music my volume increases by itself. How can I stop it from increasing?

  • Xsl:include xsl:import and clob

    I can use xslprocessor.processXSL to perform transformation where the XML and XSL are in CLOBs. However, is it possible to perform transformation if the XML and XSLs are in CLOBs and the XSL have xsl:include and xsl:import? Thanks and Regards, Andy

  • Blank previews in fx and transitions.

    I have loaded imovie6 onto my G4 400mhz mac and it works, but the previews of transitions and fx are blank. Is my computer just too slow? The transitions will apply if I apply them, I just can see them beforehand. Any suggestions? Thanks in advance V

  • FCE 4 codec

    Hi all; new to the community and appreciate the help! I'm using FCE 4 to edit my Contour HD clips. I am wondering what the best Format & Codec options to use for best results (export quality for web and DVD) in the easy setup? The clips are H.264, AA