Get the DC name for "Personal Information" - "Ethnicity, Disability & .."
Hi all,
Does anyone know what is the correct DC to enhance "Personal Information" -> "Ethnicity, Disability & .." in ESS?
THanks
Best regards,
Xiang Li Heah
Hi Xiangli,
i guess this is the DC used for "Personal Information". please check this in your NWDS Inactive DCs Tab..........ess/<country-specific>/additionalpdata.
Regards,
Anil.
Similar Messages
-
How to get the owner name for the file in ftp using abap ?
Hi folks ,
How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
but doest work out me . Helping in this regard highly appreciated ...
Thanks and regards,
Swarupa VanarchiHi
dont you have used the os user while calling the FTP_CONNECT FM?
Hope you are not talking about the user executing the FTP program.
Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
May be i am going too far with if and elses here as your question possesses no clarity.
Plz elaborate your requirement before anybody can help.
Regards
sateesh -
C Programming: How can we get the filesystem name for a given file-path?
C Programming: How can we get the filesystem name for a given file-path?
Say I have a filepath=/mnt1/file1
Using some OS API like stat, can I get the Filesystem /mnt ?
Thanks in advance,
-VEnter the command up to the point of entering the file path and add a space, then drag the file into the terminal window. It will fill out the path.
If you need to go further into the contents of the Application package, you can continue with /Contents...
Another way is to start typing and then hit Tab to auto-complete. It will stop where it can't determine the next letter.
So, type /App tab and it will fill in /Applications. Type a / and start with the name of the app, then tab and it should complete. Continue till you have the correct path.
Spaces will be replaced with \<space>, so, App Store would end up as /Applications/App\ Store.app -
Hi ,
I have a table so many constraints on so many columns. I need to know which column has which constraint plsql dev?? like below...
table_name -------- col_name ------ constraint_name_of_that_col
xxxxxx xxxxxxx xxxxxxxxxxxxxxxx
or else please let me know how can i get the corresponding col_name for a particular constraint name???My be this can give you a help:
[code]
SELECT *
FROM ALL_CONSTRAINTS
WHERE R_CONSTRAINT_NAME IN (SELECT CONSTRAINT_NAME
FROM ALL_CONSTRAINTS
WHERE TABLE_NAME = 'TABLE_NAME'
[/code] -
How to add get the field name for a newly added site column.
I have the following:-
Enterprise wiki site collection inside SharePoint server 2013.
I added a new site column of type managed metadata.
I opened the enterprisewiki.aspx page layout using the SP designer, to add the newly added site column to it.
But I have noted that to add any site column I need to know the field name , for example the default wiki category column is referenced inside the page layout as follow:-
<Taxonomy:TaxonomyFieldControl FieldName="Wiki_x0020_Page_x0020_Categories" EmptyValueDescriptionForTargetTemplate="<%$Resources:cms,enterwiki_nocategories_assigned%>" DisableInputFieldLabel="true" runat="server"/>
<b>
So my question is how I can know the field name for my newly added site column?
Thanks in advance for any help.
RegardsHi,
The “FieldName” should be the internal name of the column, you will find it at the address bar at the “Site Columns”->”Edit Column” page:
Best regards,
Patrick
Patrick Liang
TechNet Community Support -
Just new to this and unable to find answers
My solution
Public Function GetTableColumnNames() As Boolean
Form1.ListBox1.Items.Clear()
_MDFFileName = String.Format("{0}.mdf", _DatabaseName)
_sqlConnectionString = String.Format("Data Source=(LocalDB)\v11.0;AttachDBFileName={1};Initial Catalog={0};Integrated Security=True;", _DatabaseName, Path.Combine(_DatabaseDirectory, _MDFFileName))
Dim cn As New SqlConnection(_sqlConnectionString)
'put the table name in brackets in case it has spaces in it
Dim SQLString As String = "SELECT * FROM [" & _TableName & "]"
Try
cn.Open()
Dim cmd As New SqlCommand(SQLString, cn)
Dim rdr As SqlDataReader =
cmd.ExecuteReader(CommandBehavior.KeyInfo)
Dim tbl As DataTable = rdr.GetSchemaTable
'This shows all of the information you can access about each column.
For Each col As DataColumn In tbl.Columns
Form1.ListBox1.Items.Add(col.ColumnName)
Debug.Print("col name = " & col.ColumnName & ", type = " & col.DataType.ToString)
Next
'Get each column.
For Each row As DataRow In tbl.Rows
Form1.ListBox1.Items.Add(row("ColumnName"))
Next
rdr.Close()
Catch
MessageBox.Show("Error opening the connection to the database.")
Finally
cn.Close()
End Try
Return _Success
End Function -
How to get the DISPLAY name for a page in 309
How do I get hold of the page DISPLAY name in Portal 309?
I need it for the purpose of created a custom greeting and page menu tree.
I can get the main internal name, but not the user friendly display name. It must be stored somewhere!
Regards,
JohnDid you find an answer for this? I am attempting to do the same thing. I want to create a portlet with all available pages to a user. I can not seem to find the display name table.
[email protected] -
How to get the context name for a proxied servlet container
I have been using tags to build links for applications that use Tomcat and I was wondering if tags that detect the host url can be used if the servet container is behind a proxy.
For example let's say that the Tomcat context is called
app_under_test
but this url is proxied as
testing.host/beta_testing.
All urls built by the application should be http://testing.host/beta_testing/... not http:localhost:8080/app_under_test/...
The only way I can think of to do this is to have a property file with a proxy url property that is used to build all application links.
Is there a way of doing this that would not require a property file?
Thanks for any ideas and pointers,
-=beekyHi,
1.Goto transaction SM37.
2. Select the Job
3. Click on "Step" tab in the Application tool bar.
4. You'll see the program name under "Program Name/Command" in the list displayed.
<REMOVED BY MODERATOR>
Regards,
Shiny
Edited by: Alvaro Tejada Galindo on Feb 1, 2008 1:20 PM -
File upload script not getting the file name for larger files
Hi
I have the following code (see extract below) and find that
when the size of the file to upload is larger than about 300kb the
code does not grab the file name. Consequently the upload fails.
The code works fine when the file size is smaller.
The code in the form page is:
<form
action="UploadAttachment.asp?SubjectName=<%=Request.QueryString("SubjectName")%>&VersionN umber=<%=Request.QueryString("VersionNumber")%>&QualificationName=<%=Request.QueryString(" QualificationName")%>"
method="post" enctype="multipart/form-data" name="form1">
<input name="file" type="file" size="100">
<input name="Upload" type="submit" id="Upload"
value="Upload">
</form>
The code in the UploadAttachment.asp page is:
<%
'Grab the file name
Dim objUpload, strPath, SQLString
Set objUpload = New clsUpload
'there is a problem that this next line doesn't grab the file
name if file is too large.
strFileName = objUpload.Fields("file").FileName
etc.
%>
If you have any idea how to resolve this I'd be grateful.
NeilHi
I have the following code (see extract below) and find that
when the size of the file to upload is larger than about 300kb the
code does not grab the file name. Consequently the upload fails.
The code works fine when the file size is smaller.
The code in the form page is:
<form
action="UploadAttachment.asp?SubjectName=<%=Request.QueryString("SubjectName")%>&VersionN umber=<%=Request.QueryString("VersionNumber")%>&QualificationName=<%=Request.QueryString(" QualificationName")%>"
method="post" enctype="multipart/form-data" name="form1">
<input name="file" type="file" size="100">
<input name="Upload" type="submit" id="Upload"
value="Upload">
</form>
The code in the UploadAttachment.asp page is:
<%
'Grab the file name
Dim objUpload, strPath, SQLString
Set objUpload = New clsUpload
'there is a problem that this next line doesn't grab the file
name if file is too large.
strFileName = objUpload.Fields("file").FileName
etc.
%>
If you have any idea how to resolve this I'd be grateful.
Neil -
How do I programmatically get the display name for a view object in Java?
When you define a view object, there is a display name that is configured. I would like to retrieve that in Java. Can someone tell me how?
Thanks, -KlausKlaus,
you can use the attribute definitions which you get using
getAttributeDefs
AttributeDef[] getAttributeDefs()This method is accessible via the vo.
If you need this information in a bean, you can use EL like you see if you drop a vo on a page.
Timo -
Regarding finding the table name for a field in R12 forms
Hi all,
I need to know how to find the table name for a field in R12. I am working on extracting the employee information but i need to know how to get the table names for the fields.
Thank you,
rajPlease see these threads.
How to find table name in ebs
How to find table name in ebs
E-Business tables
E-Business tables
Thanks,
Hussein -
Hi all,
i need to get the region name for a selected page, but i don't know how to do it.
Does it exist a method called 'GetRegionName' or 'GetRegionId'?
Thanks
bye,
Simonai have a page with 2 tabs and i need to get the unique name or the unique id of every tab. According to their values i have to show some information...
-
Getting the variant name when the report program is run in background
Hi All,
How to get the variant name for the report program when run in background? My requirement is to create an email attachement with the name 'variant.XLS', where variant = selection screen variant, when the report program is run in background. The system field SY-SLSET holds the variant name only when run online.
Any pointers to this will be highly appreciated.
Thanks and regards,
Nilesh.Hello Nilesh,
Please find the algo:
1. Call the FM: GET_JOB_RUNTIME_INFO to get the background job details.
2. Select data from TBTCP using these details:
DATA:
FP_EVENTID TYPE BTCEVENTID
FP_EVTPARM TYPE BTCEVTPARM
FP_ACTIVE TYPE BTCXPGFLAG
FP_JOBCNT TYPE BTCJOBCNT
FP_JOBNM TYPE BTCJOB
FP_STEPCNT TYPE BTCSTEPCNT.
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
EVENTID = FP_EVENTID
EVENTPARM = FP_EVTPARM
EXTERNAL_PROGRAM_ACTIVE = FP_ACTIVE
JOBCOUNT = FP_JOBCNT
JOBNAME = FP_JOBNM
STEPCOUNT = FP_STEPCNT
EXCEPTIONS
NO_RUNTIME_INFO = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
* Error calling FM: GET_JOB_RUNTIME_INFO
ENDIF.
DATA: FP_VARIANT TYPE BTCVARIANT.
SELECT JOBNAME JOBCOUNT STEPCOUNT VARIANT
FROM TBTCP
INTO TABLE L_IT_TBTCP
WHERE JOBNAME = FP_JOBNM
AND JOBCOUNT = FP_JOBCNT
AND STEPCOUNT = FP_STEPCNT.
IF SY-SUBRC = 0.
SORT L_IT_TBTCP BY JOBNM JOBCNT STEPCNT.
READ TABLE L_IT_TBTCP INTO L_WA_TBTCP INDEX 1.
IF SY-SUBRC = 0.
FP_VARIANT = L_WA_TBTCP-VARIANT.
ENDIF.
ENDIF.
Hope this helps.
BR,
Suhas -
How to get the JNDI name of an EJB from within itself
Hello,
I'm trying to find a way to get the JNDI name of a session bean from
within itself.
In the application I'm working on we need to support multiple
customers. In order to do that, each EJB has a normal home and remote
interface, a base class bean implementation and different children
bean implemetations for each customer (when the logic for the
customers is different). JNDI is used to get the proper implementation
based on the customer.
I've got an EJB that provides some services that are the same for all
customers, except for the fact that it contains one variable that
should have a different value depending on the customer. I don't want
to creat subclasses just for that. What I want is to be able to get
the JNDI name and set the variable based on the it.
Is there a way to get the JNDI name for the EJB from within itself?
TIA
MJHi Pradeep,
Please try referring to this post which is discussed earliar and seems its also answered.
http://forums.adobe.com/thread/504861
Thanks,
Bhasker Chari -
Why can I not use the channel name, which is obtained from the function of DAQmx Task, as the input of the channel name for the function of Get Channel Information of DAQ?
Not a lot of details here, but my guess is this isn't working for you because you are wiring in the task to the Active Channels Property and not the actual Channel Name. I have attatched a screenshot of what I believe you are trying to do. The Task has 2 channels in it, so I need to index off one of the channels and wire it into the active channels input of the Channel Property node. Then I can read information about that channel
Attachments:
channel_name.JPG 69 KB
Maybe you are looking for
-
Issues Missing files & duplicate files and not enough screen space
Hello everyone, I'm using a 1.67 Ghz 15 in tibook with 1 gig of ram I had issue yesterday, missing files, I was in the rating/keywords panel scrolling through my images, one was a bit soft so I deleted it using the command delete combo. Somehow all o
-
Discoverer Viewer - date picker is missing
Hi, I have a report with the date parameter. It is based on the item of date type. If I run it in the Discoverer Plus then the parameter has the date picker next to the filed as expected and I can choose the date from the calendar. Running the same i
-
How to read and save the following XML-Doc?
Hi all, I have a XML-Document: <root> <employees> <emp1> <ename>Test1</ename> <empno>1</empno> <sal/> <ord> <item>1</item> </ord> </emp1> <emp2> <ename>Test2</ename> <empno>2</empno> <sal>1000</sal> <comm>200</comm> <ord> <item>3</item> </ord> </emp2
-
i'm looking for a simple way to create a no-frills flash slideshow. currently, i'll put my images on a layer and use frames to expand the timeline so each frame is left on long enough for viewing. is there a simple way where i can just put 15 images
-
Where do I find replies to my question and /or request for help?
I've stated my problem and have requested assistance in solving it. How do I follow up in finding replies when they appear if they do?