How do I programmatically get the display name for a view object in Java?

When you define a view object, there is a display name that is configured. I would like to retrieve that in Java. Can someone tell me how?
Thanks, -Klaus

Klaus,
you can use the attribute definitions which you get using
getAttributeDefs
AttributeDef[] getAttributeDefs()This method is accessible via the vo.
If you need this information in a bean, you can use EL like you see if you drop a vo on a page.
Timo

Similar Messages

How to get the DISPLAY name for a page in 309

How do I get hold of the page DISPLAY name in Portal 309?
I need it for the purpose of created a custom greeting and page menu tree.
I can get the main internal name, but not the user friendly display name. It must be stored somewhere!
Regards,
John

Did you find an answer for this? I am attempting to do the same thing. I want to create a portlet with all available pages to a user. I can not seem to find the display name table.
[email protected]

How to get the display name of the dropdownlist?

How can i get the display name of the dropdownlist.
I want to have value as other data not the same as display name.
In that case is there any easy way to get the display name of the selection from the dropdownlist.

I usually just use a hashmap to store the value and label, if I want to retrieve the label again later.
          HashMap bleh = new HashMap();
          bleh.put(dropDownValue, "Drop Down Label"); //Item value (any object), Item Label (String)
          Iterator it = bleh.keySet().iterator();
          while (it.hasNext()) {
               Object key = it.next();
               SelectItem selectItem = new SelectItem(key, bleh.get(key));
          //And then later, when you want to retrieve the label
          bleh.get(itemValue); //The item value of the label you wantThe value is easy to get because the selected item(s) from the list will be set to the value(s) the user selected. You should have a getter in your bean for that.
CowKing
Message was edited by:
IamCowKing

How to get the owner name for the file in ftp using abap ?

Hi folks ,
How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
but doest work out me . Helping in this regard highly appreciated ...
Thanks and regards,
Swarupa Vanarchi

Hi
dont you have used the os user while calling the FTP_CONNECT FM?
Hope you are not talking about the user executing the FTP program.
Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
May be i am going too far with if and elses here as your question possesses no clarity.
Plz elaborate your requirement before anybody can help.
Regards
sateesh

C Programming: How can we get the filesystem name for a given file-path?

C Programming: How can we get the filesystem name for a given file-path?
Say I have a filepath=/mnt1/file1
Using some OS API like stat, can I get the Filesystem /mnt ?
Thanks in advance,
-V

Enter the command up to the point of entering the file path and add a space, then drag the file into the terminal window. It will fill out the path.
If you need to go further into the contents of the Application package, you can continue with /Contents...
Another way is to start typing and then hit Tab to auto-complete. It will stop where it can't determine the next letter.
So, type /App tab and it will fill in /Applications. Type a / and start with the name of the app, then tab and it should complete. Continue till you have the correct path.
Spaces will be replaced with \<space>, so, App Store would end up as /Applications/App\ Store.app

How to change the display name for Gmail aliases?

I have a Gmail account with multiple aliases. They look like this:
Joe User <[email protected]> (Primary)
Support <[email protected]> (Alias)
Billing <[email protected]> (Alias)
Works great. I'm trying to set up Apple Mail on my new MacBook to support the aliases as well. I am able to input the e-mail aliases, but the display names for all are 'Joe User' which defeats the purpose of having the aliases.
I have to imagine I can do this. Can someone help me out?
Regards,
Dave

Anyone came here, refer to this post.
http://h30499.www3.hp.com/t5/Community-Feedback-Suggestions/change-of-display-name/m-p/6667672/highl...

How should i get the delta data for those new object's previous delta data?

Hallo all,
i have 2lis_11_vahdr and i am using a standard and loading delta! now i have appended some new fields in the datasource then in infosource then in ods and infocube..! now how should i get the delta data for those new object's previous delta data???
Jimmy

Hi,
After appending new fields in the datasoure.It is not possible to delta load, u should have to load everything
Thanks,
Shreya

ERROR - JBO-25005: Object name for type View Object is invalid

Hi All,
I am getting this error "JBO-25005: Object name for type View Object is invalid" while executing my VO query in Controller code. Can any one please tell me the reason behind this error?
I am creating a VO dynamically and .xml file of a VO is placed in a proper directly. Please let me know some inputs to resolve this.
Thanks & Regards,
-Abm

I found the below explanation for the error mentioned. Check if your package name, Object names confirm to the standard specified
JBO-25005: InvalidObjNameException
Cause: An attempt has been made to associate a business component name with an object for which it is not valid.
Action: The name should be a valid Java identifier with no spaces or punctuation. Names are of the format myProjectPackage.BusinessPackage.BusinessComponent

JBO-25005: Object name for type View Object is invalid

Hi All,
my workflow page is not opening when i try to open it by using some different responsibility.
Its throwing an error message:
JBO-25005: Object name for type View Object is invalid
any suggestions?
Thanks,
NSP

Hi NSP,
Check if any personalization been done at responsibility level , that might be causing the issue .
Also check the AOL functions as well .
--Keerthi

How do i programmatically get the current version of a file?

I asked this same question in the SP2013 forum and I haven't been able to determine the solution. So I posting this here, to maybe get more eyes on this issue.
...I am basically trying to programmatically get the current version of a document in a library, then determine if its a major or minor version, in code. I have tried doing this, to get the current version but I keep getting an empty string returned.
var versions = item.File.Versions;
string currentVersion = string.Empty;
foreach (SPListItemVersion version in item.Versions)
DateTime lastMod = version.Created;
foreach (SPFileVersion fileVersion in versions)
if (fileVersion.IsCurrentVersion == true)
currentVersion = fileVersion.ToString();
Does anyone know what am doing wrong, and how to get this resolved? I really appreciate the help. Thanks

Why not just get the SPListItem and look at it's Version property? That'll be the latest version.
No need to go into the Versions collection etc. When you get a list item you get the current version as standard.
w: http://www.the-north.com/sharepoint | t: @JMcAllisterCH | YouTube: http://www.youtube.com/user/JamieMcAllisterMVP

Where does "Skype Comunity" get the display name?

I just registered to the support comunity forums and wondering from where this site gets my display name. I have never entered it myself. I have no options to change it. I have no confirmation emails. The other weird thing is that this name is corresponding to one of my email boxes never revealed to skype. What is that all about??? Could someone kindly explain please.

I'm working on the project but the Telecom team is asking for this information. I can only guess on the reasons why he needs this information at this point. I do know he asked for it and deemed it "necessary." Hence the question to the boards. My PoC in Telecom is administering the MDM.

How can i get the column name   for assigned constraint name from the user_constraints   table?????

Hi ,
I have a table so many constraints   on so many columns. I need to know which column has which constraint plsql dev?? like below...
table_name -------- col_name ------ constraint_name_of_that_col
    xxxxxx              xxxxxxx              xxxxxxxxxxxxxxxx
or else please let me know how can i get the corresponding col_name for a particular constraint name???

My be this can give you a help:
[code]
SELECT *
FROM   ALL_CONSTRAINTS
WHERE R_CONSTRAINT_NAME IN (SELECT CONSTRAINT_NAME
                                                           FROM   ALL_CONSTRAINTS
                                                           WHERE TABLE_NAME = 'TABLE_NAME'
[/code]

How to add get the field name for a newly added site column.

I have the following:-
Enterprise wiki site collection inside SharePoint server 2013.
I added a new site column of type managed metadata.
I opened the enterprisewiki.aspx page layout using the SP designer, to add the newly added site column to it.
But I have noted that to add any site column I need to know the field name , for example the default wiki category column is referenced inside the page layout as follow:-
<Taxonomy:TaxonomyFieldControl FieldName="Wiki_x0020_Page_x0020_Categories" EmptyValueDescriptionForTargetTemplate="<%$Resources:cms,enterwiki_nocategories_assigned%>" DisableInputFieldLabel="true" runat="server"/>
<b>
So my question is how I can know the field name for my newly added site column?
Thanks in advance for any help.
Regards

Hi,
The “FieldName” should be the internal name of the column, you will find it at the address bar at the “Site Columns”->”Edit Column” page:
Best regards,
Patrick
Patrick Liang
TechNet Community Support

How do you get the column names for a given table from an SQL LocalDB programmatically in Visual Basic.

Just new to this and unable to find answers

My solution
    Public Function GetTableColumnNames() As Boolean
        Form1.ListBox1.Items.Clear()
        _MDFFileName = String.Format("{0}.mdf", _DatabaseName)
        _sqlConnectionString = String.Format("Data Source=(LocalDB)\v11.0;AttachDBFileName={1};Initial Catalog={0};Integrated Security=True;", _DatabaseName, Path.Combine(_DatabaseDirectory, _MDFFileName))
        Dim cn As New SqlConnection(_sqlConnectionString)
        'put the table name in brackets in case it has spaces in it
        Dim SQLString As String = "SELECT * FROM [" & _TableName & "]"
        Try
            cn.Open()
            Dim cmd As New SqlCommand(SQLString, cn)
            Dim rdr As SqlDataReader =
            cmd.ExecuteReader(CommandBehavior.KeyInfo)
            Dim tbl As DataTable = rdr.GetSchemaTable
            'This shows all of the information you can access about each column.
            For Each col As DataColumn In tbl.Columns
                Form1.ListBox1.Items.Add(col.ColumnName)
                Debug.Print("col name = " & col.ColumnName & ", type = " & col.DataType.ToString)
            Next
            'Get each column.
            For Each row As DataRow In tbl.Rows
                Form1.ListBox1.Items.Add(row("ColumnName"))
            Next
            rdr.Close()
        Catch
            MessageBox.Show("Error opening the connection to the database.")
        Finally
            cn.Close()
        End Try
        Return _Success
    End Function

How do i get the display back for Facebook after Lion installation?

I just installed Lion and tried to go to Facebook. Nothing is displaying properly there. Do you know how to fix that?

Do you work for Apple? So what you are telling me: it doesn't matter if I payed for it once, Apple is so low tech or just could care less about its customers that I am going to have to come out of pocket again. What is the point of the 90 day technical support that Apple offers with the Lion upgrade when it is purchased if the technical support just says...sorry, we can't help you with this problem.?
I am going to have to come out of pocket for a lot more than just the iLife collection that Apple has a copy of my purchase, which validates my request, yet Apple is not going to help me out. If that is the case, this would have to be the worst customer service I have ever gotten.
You are correct that it is my fault that my apps are gone because I did the clean install and did not think to back up my app.s, but is Apple hurting that much for money that it needs to squeeze money out of people that delete software by mistake? I have gotten two app.s for free from other small time app writers to put back on this computer after the Lion upgrade just by emailing them what happened and my info.
What about the freezing problem my iMac is having after I performed the task Apple tech supt told me to, which didn't work and created a new problem. You didn't address the freezing issue. You stating what I already said and adding a snooty comment to the end of it, while not offering any real help or advice pertaining to my questions, has been a waste of my time and an inconvenience to me that was not need. How about you think next time, before you type.
If anyone else would like to point out that I messed up or that I have no choice but to pay again, please hold your comments and allow those who might have a suggestion or answer to post, so I can get the help I asked for. Thank you, and thank you QuickTimeKirk for the speedy reply.

How do I programmatically get the display name for a view object in Java?

Similar Messages

Maybe you are looking for