Get Url Command probs

I'm having a strange problem with Flash, I have a Flash
banner which I need to attach the 'GetUrl' command to. That bit is
simple - the code is:
on (press) {
getURL("
http://www.bluesq.com/bet?AFF_ID=21454",
"_blank");
None of the expression boxes are ticked, I've tried them
clicked, unclicked - but still getting the same result.

url?
Hard to fix without seeing the problem.

Similar Messages

Adding a get URL command

I apologize in advance for being completely green to flash.
I've created an html website in dreamweaver. The opening page
has an intro flash movie (an .mov which I compressed in flash
encoder). When the movie ends I want it to automatically go to the
next page. There has to be a simple way to do this, right? I'm a
total newbie so stating anything obvious is really appreciated.
Thanks in advance.

Hello rudyt35,
> I apologize in advance for being completely green to
flash.
>
> I've created an html website in dreamweaver. The opening
page has an
> intro flash movie (an .mov which I compressed in flash
encoder). When
> the movie ends I want it to automatically go to the next
page. There
> has to be a simple way to do this, right? I'm a total
newbie so
> stating anything obvious is really appreciated.
>
> Thanks in advance.
maxi easy way, i guess, will be stretching your movie in
keyframes when importing
it inot flash. So, the last keyframe with your movie can be
visually seen
on a timeline and you can easily type in this very frame (or
the very next
frame) your getURL command.

ACE 4710 http probe get url question

I am trying to create a http probe using the request method get url command. My url contains a question mark and the ACE will not accept the url as is and it strips out the question mark character. Is there a way to make the ace accept a url containg a question mark?
probe http HTTP_PROBE
port 9040
interval 10
faildetect 5
passdetect interval 60
expect status 200 200
open 1
The url I am trying to enter is /psp/epprod/?cmd=login
When I enter it the ACE does as shown below
(config-probe-http)# request method get url /psp/epprod/?
<LINE>
ACE-APP-02/vc_peoplesoft(config-probe-http)# request method get url /psp/epprod/cmd=login
It strips out the ? character.

Hi Nicholas,
To enter a question mark you need to type ctrl+v prior to entering the ?
You enter the control key then lowercase v, then your question mark.
HTH
Pablo

Get URL + load Movie

I am going from one Flash site to another and use the get URL
code just fine getURL("
http://www.site2.com).
When I get to site2 how does one pass loadMovie or other
commands to site2 flash from site 1 with the get URL command? Is
that a case for shared Objects?
Thanks

It looks like you are loading in an external .swf for the
thumbnails and the larger images for each section. If you want to
update a particular section's photos, then you can just replace the
old .swf with a new one with the same name. Your movie will then
use the new .swf when it is called to be loaded.
You should not use getURL() for any of this. GetURL() is used
to load a new .html document into a browser.

Flash get Url not recognised by firefox

I am building a Flash Navbar in Flash MX with the "get URL" command. It works in Internet Explorer but not in Firefox. Has anyone encountered this before and, if so, is there a solution?

A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum. 
The helpers at that forum are more knowledgeable about web development issues. 
You need to register at the mozillaZine forum site in order to post at that forum. 
See http://forums.mozillazine.org/viewforum.php?f=25
You need to post a link to the website or post relevant parts of the code.

ACE Health probe using get URL

Hello,
We are trying to create a health probe for our google search appliances and as part of the URL get there is a question mark but the ACE doesn't like that. Is there a way around this or should it be done differently?
request method get url /searchq? (This is what we want the URL to be)
request method get url /searchq (This is where it thinks i'm asking it for help)
Thanks in Advance.

Hello,
You need to typ CRTL+v prior to entering the ?
That's the Control key then lowercase v, then your question mark.
Hope this helps,
Sean

Question about WEBAPI URL commands

Hi,
In Visual Composer I'm making a drilldown from table 1 (output from BW query 1) to table 2 (output BW query 2, but same filters as query 1). In my first table I have many keyfigures, in my 2nd table I just want to display that keyfigure with more detail based on the selection from query 1.
Since I can't filter on keyfigure level in VC itself I need one WEBAPI (url command) to do one additional filtering since I don't want to show all keyfigures in query 2 / table 2. I have been testing this first with supplying the WEBAPI string with the fixed (hardcoded) values and this works fine. It looks as follows :
'FILTER_IOBJNM=44RHE9MINFGXEBEXOI7S7UKE6;FILTER_VALUE=44VSUXQJNO2MG4CLOAF5M503I
The first string is the name of my keyfigure structure in my query, the 2nd string is the technical name of the keyfigure on which I want to restrict. Like it said, supplying the command url values hardcoded words so I thought i was finished...
Now I wanted to pass the right selected value from table 1 via the VC in the FILTER_VALUE field.
It looks as follows now :
'FILTER_IOBJNM=44RHE9MINFGXEBEXOI7S7UKE6;FILTER_VALUE=@KF_key'
But this doesn't seem to work although @KF_key contains the right value. KF_KEY should give the right technical keyfigure name.
Am I using the right syntax in the FILTER_VALUE part ? I have seen some topics on this forum where people also use the & symbol in some parts but I don't get it up and running
thanks
Message was edited by:
Double U

Suddenly it works.
The correct syntax :
'FILTER_IOBJNM=44RHE9MINFGXEBEXOI7S7UKE6;FILTER_VALUE='&@KF_key&''

How to get the command button component id in bean class?

Hi All,
I'm using adf 11g.
I'm having three command button , which have some similar code to use on fire of these buttons.
if it possible to catch the component id in bean , i can use the code with little parameter passing .

Hi,
You can get the command button from the actionEvent (if you are writing a generic actionListener) and from it, you can get the Text of the command button. Using which, you can process accordingly.
If the text also same, then set some client attribute for the command button (check out [url http://docs.oracle.com/cd/E21764_01/apirefs.1111/e12419/tagdoc/af_clientAttribute.html]af:clientAttribute), and from the actionListener, get the client attribute using getClientAttribute method and process accordingly.
-Arun

How to get ALL command line parameters

Hi,
Is there possibility to get all command line parameters which
Flex builder invokes when I press RUN button ?
I am asking because I want to create mxmlc ant task with the
same parameters as Flex builder.
I wrote something like that below but I have a problem with
invoking remote function, it seems that poduced SWF inf flex
builder an my script (below) arent the same - and mayby have some
security differences.
Any Ideas how to get all compiler argumets from flex builder
quote:
<mxmlc
file="${flex.src}\main.mxml"
output="${flex.output}\main.swf"
services="${path.tomcat.root.WEB}/flex/services-config.xml"
context-root="${path.tomcat.root}"
use-network="true"
keep-generated-actionscript="false"
debug="false"
locale="en_US"
incremental="true"
>

<load-config
filename="${FLEX_HOME}\frameworks\flex-config.xml"/>
<source-path path-element="${FLEX_HOME}\frameworks"/>
<compiler.source-path path-element="${flex.src}"/>
<compiler.library-path dir="${FLEX_HOME}\frameworks"
append="true">
<include name="libs" />
<include name="../bundles/{locale}" />
</compiler.library-path>
</mxmlc>

Hi,
Try -dump-config compiler argument, which will write all the
currently set configuration values. Please find more details at the
URL below.
http://www.quilix.com/node/9
Hope this helps.

URL command

I'm experienced in SSIS and some simple scripting using the Script Task. But completely new to URL commands. I have the need to download some data via a web service using a URL command. I can type this command into a web browser and it does something.
Does SSIS allow me to run a URL command somehow?... thinking Script Task. I'm so new to URL commands that I'm not even sure how to ask the question. All I know is that I have a certain URL command that I can type into a browser and I want to do the same using
SSIS. I hope my question makes sense.

You can use Webservice Task in SSIS for this
see
http://www.bidn.com/blogs/BillBrannen/bidn-blog/619/ssis-web-service-task-step-by-step
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Looks like something I should dig into. Not being familiar with what a web service is... not sure how to ask my question. I believe the particular URL I am typing into the browser is a web service. It gets some data in a csv format and I get a prompt in
the browser that asks me to open or save this csv file. That is what I want to automate using SSIS by configuring the file save location. But before I do the output file configuration, I want to see if SSIS likes the URL I typed in. Should I be able
to type in this same URL and hit Test Connection and expect it to come back OK?... because right now when I hit Test Connection, I get this error (I've also provided the login and the password required by this web service URL.)
TITLE: Microsoft Visual Studio
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
BUTTONS:
OK
Am I limited to typing in a URL that ends in .asmx?WSDL.... because the URL that I'm trying to type in goes something like h t t p s://whatever.com/blahblah/moreblah?<param1>=val1.... I'm getting the sense that this isn't the kind of URL that this
task likes.
Should I be able to work with a URL like this in SSIS?

Can not get URL using GetPageContext().getRequest().getRequestURI()

Hi guys,
I am coding a web application using ColdFusion 8.
The situation is as follow:
- I type https://mypage.com/aaa/bbb.html on web browser where aaa and bbb.html does not exist in my web folder.
- And this will drive the error 404 PageNotFound occurred, in the code that processing error 404, I tried to get URL aaa/bbb.html by using GetPageContext().getRequest().getRequestURI() but the result of this command is my created 404 error page.
- I also tried to get URL by using CGI, but also couldn't get it.
Can you guys show me the way to get URL when no page is found error occurred?
Thank you very much in advanced!

No screen wrote:
- I type https://mypage.com/aaa/bbb.html on web browser where aaa and bbb.html does not exist in my web folder.
- And this will drive the error 404 PageNotFound occurred, in the code that processing error 404, I tried to get URL aaa/bbb.html by using GetPageContext().getRequest().getRequestURI() but the result of this command is my created 404 error page.
ColdFusion will know nothing of https://mypage.com/aaa/bbb.html! As the requested page is HTML, the web server will respond to it, without involving ColdFusion. The ColdFusion function GetPageContext() is therefore irrelevant.

What are REQUEST_NO and PAGENO parameters in WebAD url commands?

Hi,
I cannot find any documentation on what are REQUEST_NO and PAGENO parameters in WebAD url commands and how to use them.
Like in this case:
http://..../sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&REQUEST_NO=0&CMD=PROCESS_VARIABLES&SUBCMD=VAR_SUBMIT&...
Will appreciate any hints!
Vitalik

This is a pretty normal thing to have to do, even on a form you can't guarantee all the values will be returned (unchecked checkboxes for instance won't ever send a value).
In my code I am checking to see if these params are in
the url or not:
arg1 = request.getParameter("arg1");
if(arg1 == null)
do something1;
arg2 = request.getParameter("arg2");
if(arg2 == null)
do something2;
Just change your logic a little:
// If the param is passed, get the value ...
if (request.getParameter("arg1") != null)
arg1 = request.getParameter("arg1");
else // No parameter "arg1" passed ...
// do something

Help on URL Commands

Hi,
I have an HTML program, in which I have created a button.
On this Button, I am executing my URL.
Our problem is when the user clicks the button, my url getting executing & he can see the entrie link on the address bar with all the variables and filters which has been set.
Is there anyway to disable the address bar through url commands by which user cannot see the url.
I have also created the logoff button on the template which i have created. Can anyone please help in code how to logoff / disconnect from BW.
Regards
Ramesh Ganji

Hi Ramesh,
if you know a little of java script, you can easily do this. You can make the address bar of window disappear using a one line of code. Give it a try, if it fits yr needs.
Regards,
Purvang

For some reason I cannot download and install the latest version of iTunes. 11.0.2. Could you help please? Each time I try, I get a command box saying 'The feature you are trying to download is on a network resource that is unavailable. Click Ok to try ag

For some reason I cannot download and install the latest version of iTunes. 11.0.2. Could you help please? Each time I try, I get a command box saying 'The feature you are trying to download is on a network resource that is unavailable. Click Ok to try again or enter an alternate path to a folder containing the installation package iTunes.ms in the box below.
Please help!
Many thanks in advance
Ben Bentley
West Midlands
UK

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Whenever I close down Photoshop CS5 I get the message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the get info command in Finder to unlock the file or change permission on the file or enc

Whenever I close down Photoshop CS5 I get the message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the get info command in Finder to unlock the file or change permission on the file or enclosing folders." What on earth does it mean? How can I stop this message from appearing?

See here:
I cannot save recent images.

Get Url Command probs

Similar Messages

Maybe you are looking for