Get USRID from P0105 based from KNVP-PERNR...
Hello Experts,
I need to get the USRID from P0105 based from the value that I got in
KNVP-PERNR(Personnel Number). Please give me an example on how to do this.
Also, is the field USRID contains the e-mail addresses of users? Thank you guys
and take care!
Hi Anji,
I tried creating a test program using what you said but it still won't work. Below is the test code:
REPORT z_aris_test_16.
TABLES: p0105.
START-OF-SELECTION.
SELECT userid FROM p0105 INTO p0105-userid.
Similar Messages
-
To fetch the srtfd value from PCL2 based on Pernr
Hi,
is there any function module to fetch field (srtfd ) value from PCL2 based on the pernr. My selection screen is having only pernr as the input and now have to get the srtfd value from PCL2.
Kindly suggest me if any FM or best procees existed.
Thanks,
Murthy.Please somebody reply.
-
Function module to get the sequence numbers based on PERNR & payroll period
Hi,
Right now i am using the function module 'CU_READ_RGDIR' to get the sequence number based on the PERNR. Once i get the data i am filtering based on payroll periods (begin date and end date). Is there any function module to get the sequence number directly based on PERNR and payroll period dates? if so could you let me know.
Thanks
SatyaI think thats the only way
CALL FUNCTION 'CU_READ_RGDIR'
EXPORTING
persnr = p0001-pernr
TABLES
in_rgdir = it_rgdir
EXCEPTIONS
no_record_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
check whether "Pay date for payroll result" with in Start Date and
End date, and "Reason for Off-Cycle Payroll" is initial
LOOP AT it_rgdir WHERE paydt >= v_begda
AND paydt <= v_endda AND
void IS INITIAL
AND ocrsn IS INITIAL
AND srtza = 'A'.
v_seqnr = it_rgdir-seqnr.
ENDLOOP.
Hope this helps.
Thanks
Kiran -
How to get username from Form-based login
I am using form-based login in my web.xml file.
When I attempt to access a protected .jsp page, I get sent to my login page as expected.
When I enter my username/password successfully it forwards me to the .jsp page I was trying to go to, as expected.
From that .jsp page, how do I get the username/password info from the login form? I looked at the session attributes, request attributes, and request parameters, but I don't see anything. Does the form-based authentication remove these variables?
I need the username that is filled out in the login form, so that I can do custom work with it. I cannot ask the user for it again after they login, as that is inefficient and sloppy.Found it.
request.getUserPrincipal().getName() -
Partner functions (R/3- CRM) based on employee number (KNVP-PERNR) or CP
Hi all gurus,
I am trying to replicate an partner-function base on personnel number/employee number for customers from R/3 to CRM.
For those partner-functions only the employee number is filled in KNVP-PERNR (the KNVP-KUNN2, KNVP-LIFNR and KNVP-PARNR are empty).
If I follow the replication process I don't see the employee number getting mapped to the "bapimtcs structure" (in function module COM_BUPA_MWX_CREATE_REL) and therefore those partnerfunctions are not replicated to CRM.
(all employees are entered in HR-R/3 and downloaded to CRM as business partners)
Basically this is exatly the same situation described in the following forum:
[Replicate partner functions (R/3->CRM) base on employee number (KNVP-PERNR) |Replicate partner functions (R/3->CRM) base on employee number (KNVP-PERNR)]
What (function modules/configuration) is necessary to get those partner-functions being replicated to CRM?
Unfortunately I was pretty unable to collect valid solution track.
Thanks in advance,
AndreAHi Andrea,
We were able to solve the exact same issue.
Here are steps used by us to fix the issue :
IMG Settings in CRM :
SPRO>CRM>Basic Functions>Partner Processing> Date Transfer>Distribution of Partner Functions from SAP ECC into CRM>
Partner Function = VE
Funciton = Employee Responsible(00000014) ( can be any other partner function which is a employee)
Usage= CRM
Also make sure the following settings are also done
SPRO>CRM>Basic Functions>Partner Processing> Date Transfer-->Distribution of Partner Functions from CRM into SAP ECC
Funciton = Employee Responsible(00000014)
Partner Function Cat = Employee
Scenario = CRM
R/3 func = VE ( even though you are using the PE partner function in ECCwe use VE here as you know VE is the german version of PE)
Type = MR master record
Also make sure that SAP Notes 1020514 and 1099363 have been applied in ECC.
Let me know if you have any issues. This should fix it.
Thanks
Edited by: Venkat_30 on Dec 14, 2011 5:15 AM -
Function Module to retrieve ALL Sales Orders in SAP based from a UserStatus
Can someone know a function module to give me a set of Sales Documents
of a specifc type and a specific System Status.
For example:
CALL FUNCTION '?????'
EXPORTING
txt04 = 'INAC' "specfic status text not the 'E0001' JEST-STAT value.
inact = ' ' "for ACTIVE statuses only.
auart = 'ZMAG' "specifc document type
TABLES
t_vbeln = i_vbeln "result is a list of sales orders based from criteria above
I am thinking it is not as simple as the above. But 2 - 3 FMs will do.
Note: I am not given a choice to SELECT from DB tables VBAK and JEST. They want pure FM calls only. Please reply ASAP.Hi,
i dont think there is any FM as such ..
but in VA05,,, u will get the all the information
reward points if it is useful...
thanks,
Manjunath MS -
Get previous and latest salary from IT0008 Record
Hey guys, i am trying to develop a letter that needs to show an increment, i.e. grab the current and previous records from IT0008..
I have tried a few things:
CALL FUNCTION 'HR_READ_INFOTYPE'
>> this does not get the salary i need.. but gives me dates that i used in:
CALL FUNCTION 'RP_FILL_WAGE_TYPE_TABLE'
>> this is returning the current salary and future salarys (we have some postdated increments in the system) but does not get me the previous no matter what i put in for dates.
also tried:
CALL FUNCTION 'RP_FILL_WAGE_TYPE_TABLE_EXT'
>> same as above.
thoughts? i want to get the last two records as they appear in Pa20/30 for IT0008.
Thanks!
-JasonJason:
My suggestion
SELECT * FROM PA0008 WHERE INTO it_0008
PERNR EQ P_PERNR.
SORT it_0008 BY ENDDA DESCENDING.
READ TABLE it_0008 INDEX 1.
MOVE it_0008 TO WA_LAST.
READ TABLE it_0008 INDEX 2
MOVE it_0008 to WA_PREV.
Obvious, wa_last and wa_prev there are work area LIKE PA0008.
I think this can work fine.
Regards.
José Luis -
How to fetch data from bseg based on 2 internal tables in 1 select query?
hi,
i have bukrs and belnr in one internal table and bukrs and vbeln in another internal table..now if i select from bseg twice using for all entries for fields bukrs vbeln and bukrs belnr twice in 2 select statements its fine..but since bseg is a huge table i want to use select only once..but the problem is that none of the belnrs in the one internal table will have vbeln in another internal table....ie if vbeln is selected from bseg based on belnr in 1 internal table non eof those vbeln will be equal to vbeln on another internal tables..in this scenario even if i take all data from two internal tables into 1 single internal table and then use for all entries on vbeln and belnr of that table ..but i think this will not work because and AND operator will not work because no record will satisfy both vbeln and belnr conditions..even if i use OR operator if the 1st condition satisfies the select clause will not enter into the second clause and all the records will not be fetched...Please help how should i tackle this..Hi vijaya,
no simple select statement solution so far.
As BSEG is a huge table you should try to get the full key values into another internal table first.
SAP avoids direct selections from BSEG.
Pleas consider the use of one of the secondary index tables first:
BSAD : Accounting: Secondary Index for Customers (Cleared Items)
BSAK : Accounting: Secondary Index for Vendors (Cleared Items)
BSAS : Accounting: Secondary Index for G/L Accounts (Cleared Item
BSEC : One-Time Account Data Document Segment
BSEG : Accounting Document Segment
BSID : Accounting: Secondary Index for Customers
BSIK : Accounting: Secondary Index for Vendors
BSIS : Accounting: Secondary Index for G/L Accounts
you may include
BKPF : Accounting Document Header
for restrictions about time and document type.
The last step is a FOR ALL ENTRIES selection from BSEG providing the full key values.
Although you may have even more selects, the overall performance will be much better.
Regards,
Clemens -
How to process data in the past based from data in the present
hello guys,
i have a problem in my labview programs. how to process data in the past based from data in the present ?
i have a formula self-organizing maps
this formula is looking for D1, D1 is neuron index that will be searched for the smallest value.and the result are D1=2 ,D2=5, D3=17 from calculating with formula .it means the smallest value is 2, "2" from weight [2 2] in file attached.
and then it will be in other formula
it mean [2 2] + 0.5 ( [1 1]-[2 2] ) = [1.5 1.5]
and the weight will be [1.5 2 2 ] in matrix
1.5 3 5
I would appreciate any input/help on solving this
thanks
Attachments:
dika.vi 16 KB
weight.txt 1 KB
data .txt 1 KBHi Ronny Hanks,
Moving your records from internal table into the database table depends upon various scenarios :-
1. If you use INSERT statement.
INSERT <database_table> FROM TABLE <internal_table>.
But in this case, you need to make sure that you don't have any duplicate entries in your internal table that violates data entry into database table, else you will get a dump.
INSERT <database_table> FROM TABLE <internal_table> ACCEPTING DUPLICATE KEYS.
In this case, you are forcefully inserting duplicate records into your database table which may lead to data redundancy in your database table.
2. If you use UPDATE statement.
UPDATE <database_table> FROM TABLE <internal_table>.
This will update the existing records in your database table from the internal table.
3. If you use MODIFY statement.
MODIFY <database_table> FROM TABLE <internal_table>.
This statement works both in combination of INSERT & UPDATE statements.
Existing records (in database table) will be eventually updated/modified and new records (not in database table currently) will be successfully inserted into the database table.
Hope this solves your problem.
Thanks & Regards.
Tarun Gambhir. -
Exchange rate should pick from TCURR based on custom date field added in MIGO
Hi,
In MIGO, FI document get posted by picking exchange rate based on the posting date. Through BADI(MB_DOCUMENT_BADI) we have added a field called translation date in MIGO screen, while doing GRN exchange rate should pick from TCURR based on translation date instead of posting date. We have tried this logic using substitution (GGB1) in FI accounting it is working fine in FB60 & F-02 transaction but it is not working with MIGO transaction. Please suggest some solution for this.
Thanks & Regards
Vinoth Kumar.MHi Maniraj,
This will a modification to existing system and it is not supported directly.
There are 2 notes of SAP for modification of translation date of BKPF.
SAP Note 574583 will activate a BADI kindly refer to it for details.
http://www.stechno.net/sap-notes.html?view=sapnote&id=574583
There is another one but is appilcable if material ledger is active in the system
Regards -
Get week number for day from a list of days within a year..
I am beginning in ORACLE / SQL and wondering how I can use this query to work with a column of Dates that span over a number of years?
Ideally, I would like to use this script to add a number for the week of the year based on this.
Then when a new year begins to start over..
I am referencing an old thread..
TO_CHAR with dates to get week number issue
Here is what I have so far:
I keep getting an error stating "Bind Variable "p_date_beg" is NOT DECLARED"..
Thanks in advance for any help you can provide.
DECLARE
p_date_beg DATE;
BEGIN
SELECT RETRIEVAL_DATE
INTO P_DATE_BEG
FROM OBS_SELECT_LST12_SPG;
WITH TAB AS
(SELECT TO_DATE(TO_CHAR(:p_date_beg,'YYYYMM')||'01','YYYYMMDD') + LEVEL -1 DATE_COL
FROM DUAL
CONNECT BY LEVEL <=TO_NUMBER(TO_CHAR(LAST_DAY(:p_date_beg),'DD')))
SELECT DATE_COL, TO_CHAR(DATE_COL, 'FMDAY') DAY,
(CASE
WHEN TO_CHAR(TRUNC(DATE_COL, 'mm'),'FMDAY') = 'SUNDAY'
THEN TO_NUMBER(TO_CHAR(DATE_COL,'W'))
ELSE CEIL((TO_CHAR(SYSDATE, 'dd') + 1 - TO_CHAR(NEXT_DAY(TRUNC(SYSDATE, 'mm'), 'SUNDAY'), 'dd'))/7)
END) WEEK_NOB
END;hi, referring to this link about ISO week, http://www.epochconverter.com/date-and-time/weeknumbers-by-year.php, here is the code:
/* Formatted on 2012/06/13 06:32 (Formatter Plus v4.8.8) */
WITH t AS
(SELECT MIN (TO_DATE ('20120101', 'rrrrmmdd') + LEVEL - 1)
start_date,
1 week_th
FROM DUAL
WHERE TO_CHAR ( TRUNC (TO_DATE ('20120101', 'rrrrmmdd'), 'mm')
+ LEVEL
- 1,
'FMDAY'
) = 'MONDAY'
AND ( TO_DATE ('20120101', 'rrrrmmdd') + LEVEL - 1 <
TRUNC (NEXT_DAY (TO_DATE ('20120101', 'rrrrmmdd'),
'THU'
OR (TO_DATE ('20120101', 'rrrrmmdd') + LEVEL - 1
BETWEEN TRUNC (NEXT_DAY (TO_DATE ('20120101',
'rrrrmmdd'
'THU'
AND TRUNC (NEXT_DAY (TO_DATE ('20120101',
'rrrrmmdd'
'THU'
+ 7
CONNECT BY LEVEL < 15),
v AS
(SELECT t.start_date + 7 * (LEVEL - 1) start_date,
t.week_th + LEVEL - 1 week_th
FROM t
CONNECT BY LEVEL < 53),
u AS
(SELECT '20120501' dt
FROM DUAL
UNION ALL
SELECT '20120502'
FROM DUAL
UNION ALL
SELECT '20120503'
FROM DUAL
UNION ALL
SELECT '20120504'
FROM DUAL
UNION ALL
SELECT '20120505'
FROM DUAL
UNION ALL
SELECT '20120506'
FROM DUAL
UNION ALL
SELECT '20120507'
FROM DUAL
UNION ALL
SELECT '20120508'
FROM DUAL
UNION ALL
SELECT '20120509'
FROM DUAL)
SELECT *
FROM u, v
WHERE TO_DATE (u.dt, 'rrrrmmdd') BETWEEN v.start_date AND (v.start_date + 6);output:
DT START_DATE WEEK_TH
20120501 30/04/2012 18
20120502 30/04/2012 18
20120503 30/04/2012 18
20120504 30/04/2012 18
20120505 30/04/2012 18
20120506 30/04/2012 18
20120507 07/05/2012 19
20120508 07/05/2012 19
20120509 07/05/2012 19 -
Fetch records from Database based on Input value
Hi Experts,
In my mobile application, I have designed one input field with F4 help or input assist. I need to fetch records from database based on that input and need to display records in table.
My question is:
How to fetch the records from database/back end based on the input value and display them as table format as we are doing in SAP ABAP?
Here, I need to fetch the records based on input value available in the UI screen and pass that value to gateway, fetch the records from database and need to bind with table in SAPUI5.
Kindly share the whole process flow with sample code for this requirement. Hope I have explained the requirement in detail.
Thanks In Advance..
Regards,
Arindam Samanta.Hi,
Try something like this.
In this, I am passing From date, To date, RelGrp, RelStr, Uname as input. Then I am storing those values in variables and passing this data in Odata request.
OData.read({ requestUri: "http://xxxx:8000/sap/opu/odata/sap/Z188_PO_SRV/pos?$filter=Docdate le datetime'"
+ todateformat+"T00:00:00' and Docdate ge datetime'"
+ fromdateformat+"T00:00:00' and RelGrp eq '"
+ relcode +"'and RelStr eq '"
+ relstg +"'and Uname eq '"
+ username+ "' "},
function (data) {
console.log(data);
When we are giving correct inputs it will goes to Success function and get the data from back end.
In console we can see the data.
Hope this will helps to you.
Thanks&Regards
Sridevi -
How to create a service entry sheet based from the PO
how to create a service entry sheet based from the PO
Gurus,
I am creating a service entry sheet from the PO but I am getting an error of u201CPlease maintain services or limits Message no. SE029- Diagnosis(You cannot enter data until the PO item has been maintained correctly) u201C
The document type of the PO is standard NB, account assignment category is Q- (Proj make to order) and the item category is D(service). Then I am trying also create a PR using account assignment category is Q- (Proj make to order) and the item category is D(service) but still cannot proceed, a message asking me to enter a service entry number. What I know the process is create a PO(maybe based from PR) then post the GR then create a service entry sheet in ML81N but I cannot proceed. Just creating a PR or PO using those mentioned account assignment and item category and getting an error of need to enter a service entry sheet number.
Please help.thanks!HI,
Process for Creating Service Entry Sheet
Transaction Code : ML81N
1)To open the respective Purchase Order, Click on the u2018Other Purchase Orderu2019, then enter the Purchase Order No.
2)Click on the u2018Create Entry Sheetu2019 icon(3rd Icon on Top-Left)
3)Give Short Text (e.g. R/A Bill No. 1) and top service entry sheet number also generated.
4)Click u2018Service Selectionu2019 Icon on the Bottom of the Screen.
5)For the 1st Time, when we are making Service Entry Sheet for a respective Purchase Order, we need to u201CAdopt Full Quantityu201D by clicking the Check box next to it, then Enter. (*For the next time, no adoption is required, just continue)
6)Select the respective Services by clicking on the Left Hand Side, then Click u2018Servicesu2019 (Adopt services) icon on the Top.
7)Give the completed Quantity, then Click u2018Acceptu2019 icon(a green flag on the top)
8)Save .
9)Service Entry Sheet is SAVED and account posting made.
Hope, it is useful for you,
Regards,
K.Rajendran -
Exclude a table from time-based reduction
Hi,
Iu2019d like to exclude a table from time-based reduction. How can I do this ? Is there any manual how to do customizing in TDMS ?
Regards
p121848Thank you Markus for your annotation.
AUFK is technically declared as an Master Data Table, but stores orders. Standard
TDMS provides a reduction of this file and in the client copies we did via TDMS a lot of records disappeared when we selected time-reduction.
Now we fond out that some Transactions as OKB9 or KA03 refer to old internal orders. So we would like to maintain the customizing, to exclude AUFK from reduction. But this is not possible in activity TD02P_TABLEINFO, because no changes can be done to the tables, which have got the transfer_status 1 = Reduce.
You can manipulate the Transfer-Status in file CNVTDMS_02_STEMP before getting to activity TD02P_TABLEINFO, but I wonder whether this is the way one should do.
Any idea ?
Regards p121848 -
Error when querying REST web services from web-based InfoPath form 2013 environment
Error when querying REST web services from web-based InfoPath form 2013 environment, we are trying to consume REST web service in InfoPath form ( SharePoint 2013 version)
http://spapp/sites/litigation/Intake/_api/web/lists/getbytitle('Email%20Profiles')/items(1)
it works in preview but does not when it is published. because of claim based authentication i m getting below error
The form cannot run specified query, the underlying connection was closed. An expected error occurred
same works in 2010 environment .. are we missing anything in 2013 servers?? please let me know how we can resolve it.. thank you
gurueveryone face this issue, nothing in event viewer, its easy to reproduce error at ur end also..
just you need to use below web service in infopath and populate some data on form load like id = 1 pull the title and try to set in form any field...the
list has one item thats all
guru
Maybe you are looking for
-
HOW do I subtotal a filtered column?
I can't seem to subtotal any columns if they have been filtered. If you use the SUM function, it still calculates all of the chart's rows. How do I only add up the filtered set? Thank you! -Chris
-
Hi I am trying to edit test partner script from eca script, but i am getting one error 'ecatt error ECATT_STORE_BLOB(2) saving of blob denied for security reasons. you may not be in the edit mode of ecatt ' when i click on ok button it is telling err
-
HP OJ Pro 8500A not printing barcodes on boarding passes accurately
Recently upgraded to this model. I travel weekly and have never had this problem. Have tried adjusting settings to 'best'quality with no luck. The rest of the print quality is perfect but the barcodes required for scanning have some grey bars / secti
-
Macbook Pro Screen not working properly?
I have a 2012 Macbook Pro without retina display. About a month ago some little kid was playing basketball out by the park where I was using it and the basketball bounced off the rim and hit my computer and broke my LCD screen So I brought it to a re
-
Job SEND_SYSTEM_RELATIONSHIP_TO_SUPPORT aborts
Hi all, for some reason the Job SEND_SYSTEM_RELATIONSHIP_TO_SUPPORT (Step: AI_SC_SEND_SYSTEM_RELATIONSHIP) aborts at every execution. The Job Log looks like: - Job started - Step 001 started (Program AI_SC_SEND_SYSTEM_RELATIONSHIP, Variant , Username