GetFloatProperty gives wrong result for values out of range

Hi
When the method setFloatProperty is called by setting the float values out of the range,then calling getFloatProperty does not give NumberFormatException.
Float value set more the MAX_VALUE of float returns infinity when getFloatProperty is called.Similar problem occurs with setDoubleProperty.This behavior is confusing.can anyone help me out.
Regards
saroj13

Throwing a NumberFormatException would never make sense in this situation. The exception indicates that you are trying to convert a String to a number, but the String does not contain a valid number. eg. "as3"; when a conversion was attemted would throw a NumberFormatException.
Floats and Doubles in Java comply with the IEEE 754 standard which mandates the behaviour of the types.
Could you explain why you find this confusing?
Hope this helps.

Similar Messages

Week function gives wrong result for last week in year

Week(CreateDate(2011,12,25)) returns 51 - correct
Week(CreateDate(2011,12,26)) returns 53 - wrong
It looks like all last weeks of the year are 53 whereas the next year with 53 weeks should be 2015.
See http://tuxgraphics.org/toolbox/calendar.html for example.
I am running CF9 on Windows 7 with Java V6 update 29.
This is causing me a problem. Any ideas for a workaround?
Doug

Here is my general solution for my cfc which seems to work for all dates up to 2100 at least.
Hope it can help if you need a Week function to replace the CF one.
<cffunction name="getISOWeekNum" access="public" returntype="Numeric" hint="Gets ISO week number in which date occurs.">
 <cfargument name="date" type="date" required="true" hint="Date for which you wish to know the week number">
 <cfset var weeknum = 0>
 <cfset var isLeap = isLeapYear(Year(date))>
 <cfset var dayInWeek = dayOfWeek(date)>
 <cfset var isoDayOfWeek = iIf(dayInWeek GT 1, dayInWeek - 1, 7)>
 <cfset var nearestThur = dateAdd("d", 4 - isoDayOfWeek, date)>
 <cfset var fourthDayOfYear = createDate(year(nearestThur), 1, 4)>
 <cfset var fourthDayInWeek = dayOfWeek(fourthDayOfYear)>
 <cfset var fourthIsoDayOfWeek = iif(fourthDayInWeek GT 1, fourthDayInWeek - 1, 7)>
 <cfset var firstThur = dateAdd("d", 4 - fourthIsoDayOfWeek, fourthDayOfYear)>
 <cfset var lastWeek = iIf(fourthDayInWeek EQ 8 OR (isLeap AND fourthDayInWeek EQ 7), 53, 52)>
 <cfset var firstIsoDayOfFirstWeek = dateAdd("d", -(fourthIsoDayOfWeek-1), fourthDayOfYear)>
 <cfset var firstIsoDayOfLastWeek = dateAdd("d", -7, firstIsoDayOfFirstWeek)>
 <cfset var lastIsoDayOfFirstWeek = dateAdd("d", 6, firstIsoDayOfFirstWeek)>
 <cfset var weekDiff = iIf(dateCompare(date, firstIsoDayOfFirstWeek, "d") EQ -1, 0, 1)>
 <cfif dateCompare(date, firstIsoDayOfFirstWeek, "d") EQ -1 AND dateCompare(date, firstIsoDayOfLastWeek, "d") NEQ -1>
 <cfset weeknum = lastWeek>
 <cfelseif dateCompare(date, lastIsoDayOfFirstWeek, "d") NEQ 1 AND dateCompare(date, firstIsoDayOfLastWeek, "d") NEQ -1>
 <cfset weeknum = 1>
 <cfelse>
 <cfset weeknum = weekDiff + (dateDiff("d", firstThur, nearestThur) / 7)>
 </cfif>
 <cfreturn weeknum>
</cffunction>
Doug

Select for update gives wrong results. Is it a bug?

Hi,
Select for update gives wrong results. Is it a bug?
CREATE TABLE TaxIds
TaxId NUMBER(6) NOT NULL,
LocationId NUMBER(3) NOT NULL,
Status NUMBER(1)
PARTITION BY LIST (LocationId)
PARTITION P111 VALUES (111),
PARTITION P222 VALUES (222),
PARTITION P333 VALUES (333)
ALTER TABLE TaxIds ADD ( CONSTRAINT PK_TaxIds PRIMARY KEY (TaxId));
CREATE INDEX NI_TaxIdsStatus ON TaxIds ( NVL(Status,0) ) LOCAL;
Insert into TAXIDS (TAXID, LOCATIONID, STATUS) Values (100101, 111, NULL);
Insert into TAXIDS (TAXID, LOCATIONID, STATUS) Values (100102, 111, NULL);
Insert into TAXIDS (TAXID, LOCATIONID, STATUS) Values (100103, 111, NULL);
Insert into TAXIDS (TAXID, LOCATIONID, STATUS) Values (100104, 111, NULL);
Insert into TAXIDS (TAXID, LOCATIONID, STATUS) Values (200101, 222, NULL);
Insert into TAXIDS (TAXID, LOCATIONID, STATUS) Values (200102, 222, NULL);
Insert into TAXIDS (TAXID, LOCATIONID, STATUS) Values (200103, 222, NULL);
--Session_1 return TAXID=100101
select TAXID from TAXIDS where LOCATIONID=111 and NVL(STATUS,0)=0 AND rownum=1 for update
--Session_2 waits commit
select TAXID from TAXIDS where LOCATIONID=111 and NVL(STATUS,0)=0 AND rownum=1 for update
--Session_1
update TAXIDS set STATUS=1 Where TaxId=100101;
commit;
--Session_2 return 100101 opps!?
--Session_1 return TAXID=100102
select TAXID, STATUS from TAXIDS where LOCATIONID=111 and NVL(STATUS,0)=0 AND rownum=1 for update
--Session_2 waits commit
select TAXID, STATUS from TAXIDS where LOCATIONID=111 and NVL(STATUS,0)=0 AND rownum=1 for update
--Session_1
update TAXIDS set STATUS=1 Where TaxId=100102;
commit;
--Session_2 return 100103

This is a bug. Got to be a bug.
This should be nothing to do with indeterminate results from ROWNUM, and nothing to do with read consistency at the point of statement start time in session2., surely.
Session 2 should never return 100101 once the lock from session 1 is released.
The SELECT FOR UPDATE should restart and 100101 should not be selected as it does not meet the criteria of the select.
A statement restart should ensure this.
A number of demos highlight this.
Firstly, recall the original observation in the original test case.
Setup
SQL> DROP TABLE taxids;
Table dropped.
SQL>
SQL> CREATE TABLE TaxIds
2 (TaxId NUMBER(6) NOT NULL,
3   LocationId NUMBER(3) NOT NULL,
4   Status NUMBER(1))
5 PARTITION BY LIST (LocationId)
6 (PARTITION P111 VALUES (111),
7   PARTITION P222 VALUES (222),
8   PARTITION P333 VALUES (333));
Table created.
SQL>
SQL> ALTER TABLE TaxIds ADD ( CONSTRAINT PK_TaxIds PRIMARY KEY (TaxId));
Table altered.
SQL>
SQL> CREATE INDEX NI_TaxIdsStatus ON TaxIds ( NVL(Status,0) ) LOCAL;
Index created.
SQL>
SQL>
SQL> Insert into TAXIDS (TAXID, LOCATIONID, STATUS) Values (100101, 111, NULL);
1 row created.
SQL> Insert into TAXIDS (TAXID, LOCATIONID, STATUS) Values (100102, 111, NULL);
1 row created.
SQL> Insert into TAXIDS (TAXID, LOCATIONID, STATUS) Values (100103, 111, NULL);
1 row created.
SQL> Insert into TAXIDS (TAXID, LOCATIONID, STATUS) Values (100104, 111, NULL);
1 row created.
SQL> Insert into TAXIDS (TAXID, LOCATIONID, STATUS) Values (200101, 222, NULL);
1 row created.
SQL> Insert into TAXIDS (TAXID, LOCATIONID, STATUS) Values (200102, 222, NULL);
1 row created.
SQL> commit;
Commit complete.
SQL> Original observation:
Session1>SELECT taxid
2 FROM   taxids
3 WHERE locationid    = 111
4 AND    NVL(STATUS,0) = 0
5 AND    ROWNUM        = 1
6 FOR UPDATE;
     TAXID
    100101
Session1>
--> Session 2 with same statement hangs until
Session1>BEGIN
2   UPDATE taxids SET status=1 WHERE taxid=100101;
3   COMMIT;
4 END;
5 /
PL/SQL procedure successfully completed.
Session1>
--> At which point, Session 2 returns
Session2>SELECT taxid
2 FROM   taxids
3 WHERE locationid    = 111
4 AND    NVL(STATUS,0) = 0
5 AND    ROWNUM        = 1
6 FOR UPDATE;
     TAXID
    100101
Session2>There's no way that session 2 should have returned 100101. That is the point of FOR UPDATE. It completely reintroduces the lost UPDATE scenario.
Secondly, what happens if we drop the index.
Let's reset the data and drop the index:
Session1>UPDATE taxids SET status=0 where taxid=100101;
1 row updated.
Session1>commit;
Commit complete.
Session1>drop index NI_TaxIdsStatus;
Index dropped.
Session1>Then try again:
Session1>SELECT taxid
2 FROM   taxids
3 WHERE locationid    = 111
4 AND    NVL(STATUS,0) = 0
5 AND    ROWNUM        = 1
6 FOR UPDATE;
     TAXID
    100101
Session1>
--> Session 2 hangs again until
Session1>BEGIN
2   UPDATE taxids SET status=1 WHERE taxid=100101;
3   COMMIT;
4 END;
5 /
PL/SQL procedure successfully completed.
Session1>
--> At which point in session 2:
Session2>SELECT taxid
2 FROM   taxids
3 WHERE locationid    = 111
4 AND    NVL(STATUS,0) = 0
5 AND    ROWNUM        = 1
6 FOR UPDATE;
     TAXID
    100102
Session2>Proves nothing, Non-deterministic ROWNUM you say.
Then let's reset, recreate the index and explicity ask then for row 100101.
It should give the same result as the ROWNUM query without any doubts over the ROWNUM, etc.
If the original behaviour was correct, session 2 should also be able to get 100101:
Session1>SELECT taxid
2 FROM   taxids
3 WHERE locationid    = 111
4 AND    NVL(STATUS,0) = 0
5 AND    taxid         = 100101
6 FOR UPDATE;
     TAXID
    100101
Session1>
--> same statement hangs in session 2 until
Session1>BEGIN
2   UPDATE taxids SET status=1 WHERE taxid=100101;
3   COMMIT;
4 END;
5 /
PL/SQL procedure successfully completed.
Session1>
--> so session 2 stops being blocked and:
Session2>SELECT taxid
2 FROM   taxids
3 WHERE locationid    = 111
4 AND    NVL(STATUS,0) = 0
5 AND    taxid         = 100101
6 FOR UPDATE;
no rows selected
Session2>Of course, this is how it should happen, surely?
Just to double check, let's reintroduce ROWNUM but force the order by to show it's not about read consistency at the start of the statement - restart should prevent it.
(reset, then)
Session1> select t.taxid
2   from
3    (select taxid, rowid rd
4      from   taxids
5      where locationid = 111
6      and    nvl(status,0) = 0
7      order by taxid) x
8   , taxids t
9   where t.rowid = x.rd
10   and   rownum = 1
11   for update of t.status;
     TAXID
    100101
Session1>
--> Yes, session 2 hangs until...
Session1>BEGIN
2   UPDATE taxids SET status=1 WHERE taxid=100101;
3   COMMIT;
4 END;
5 /
PL/SQL procedure successfully completed.
Session1>
--> and then
Session2> select t.taxid
2   from
3    (select taxid, rowid rd
4      from   taxids
5      where locationid = 111
6      and    nvl(status,0) = 0
7      order by taxid) x
8   , taxids t
9   where t.rowid = x.rd
10   and   rownum = 1
11   for update of t.status;
     TAXID
    100102
Session2>Session 2 should never be allowed to get 100101 once the lock is released.
This is a bug.
The worrying thing is that I can reproduce in 9.2.0.8 and 11.2.0.2.

The conversion of a varchar data type to a datetime data type resulted in an out-of-range value

I am trying to insert records into a temporary table with date values concatenated with other string values into one large string value.I am getting the following error:
Msg 242, Level 16, State 3, Line 12
The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.
Msg 241, Level 16, State 1, Line 28
Conversion failed when converting date and/or time from character string.
-My code below
Declare
 @hdrLOCAL char(255),
 @CR char(255),
 @BLDCHKDT DATETIME,
 @BLDCHTIME DATETIME,
 @hdrline int
 SELECT @hdrLOCAL = DDLINE FROM DD40400 WHERE INDXLONG =1
 SELECT @CR = DDLINE FROM DD40400 WHERE INDXLONG =2
 SELECT @hdrline =1
 SELECT
 @BLDCHKDT = CONVERT(varchar(20),T756.PAYDATE,105) ,
 -- convert(varchar,getdate(),15)
 @BLDCHTIME= CONVERT(varchar(20),T756.PAYDATE,105)
 FROM STATS.dbo.DD10500 T762
 LEFT OUTER JOIN STATS.dbo.DD10400 T756 ON (
 T762.INDXLONG = T756.INDXLONG
 AND T756.INCLPYMT = 1
 WHERE (T756.INCLPYMT = 1)
 AND (T762.DDAMTDLR <> 0)
Create TABLE [dbo].[##DD10200B](
 [INDXLONG] [int] NOT NULL,
 [DDLINE] [varchar](8000) NOT NULL,
 [DEX_ROW_ID] [int] IDENTITY(1,1) NOT NULL,
BEGIN
INSERT INTO ##DD10200B (INDXLONG,DDLINE)
 VALUES (1,@hdrLOCAL +',' + @CR +','+ @BLDCHKDT +',' + @BLDCHTIME )
END
Msg 242, Level 16, State 3, Line 12
The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.
Msg 241, Level 16, State 1, Line 28
Conversion failed when converting date and/or time from character string.
The Best thing in Life is Life

Since the Variable
BLDCHKDT and BLDCHTIME are of type date time why are you trying to assign it a value
of type varchar
and the format 105 gives you dd-mm-yyyy but SQL server takes the default format as mm-dd-yyyy so the error occurs for all dates that
are greater than 12
try the below code
Declare
@hdrLOCAL char(255),
@CR char(255),
@BLDCHKDT Varchar(50),
@BLDCHTIME Varchar(50),
@hdrline int
SELECT @hdrLOCAL = DDLINE FROM DD40400 WHERE INDXLONG =1
SELECT @CR = DDLINE FROM DD40400 WHERE INDXLONG =2
SELECT @hdrline =1
SELECT
@BLDCHKDT = CONVERT(varchar(20),T756.PAYDATE,105) ,
-- convert(varchar,getdate(),15)
@BLDCHTIME= CONVERT(varchar(20),T756.PAYDATE,105)
FROM STATS.dbo.DD10500 T762
LEFT OUTER JOIN STATS.dbo.DD10400 T756 ON (
T762.INDXLONG = T756.INDXLONG
AND T756.INCLPYMT = 1
WHERE (T756.INCLPYMT = 1)
AND (T762.DDAMTDLR <> 0)
Create TABLE [dbo].[##DD10200B](
[INDXLONG] [int] NOT NULL,
[DDLINE] [varchar](8000) NOT NULL,
[DEX_ROW_ID] [int] IDENTITY(1,1) NOT NULL,
BEGIN
INSERT INTO ##DD10200B (INDXLONG,DDLINE)
VALUES (1,@hdrLOCAL +',' + @CR +','+ @BLDCHKDT +',' + @BLDCHTIME )
END
the only change done is
@BLDCHKDT Varchar(50),
@BLDCHTIME Varchar(50),
Surender Singh Bhadauria
My Blog

Content Search Web Part displaying wrong Results for anonymous Users.

HI Forum Group,
I am getting Wrong results for my content search web part. The requirement is to show the News Description for the selected news item.
I have a catalog site which stores News like
News1
News2
News3
as Items. and i have connected this catalog in publishing site which is anonymous. In the publishing site created one page "News.aspx"added search results webpart which shows all the news item. Added one page "Description.aspx" to show
description to show the selected news item.
When ever user selects any news from news.aspx page it will redirected to description.aspx with the selected item ID
The "Description.aspx" the search results page gets the data based on the URL by QueryString parameter as shown below
The problem is, if i multiple items to open in tabs all the items are showing the data same as the first selected item, though the article ID is different.
Thanks
Sithender

Hi，
Thank you for your feedback on how you were successful in resolving this issue.
Your solution will benefit many other users, and we really value having you as a Microsoft customer.
Have a nice day!
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

0CRM_OPPT_H (Transaction RSA3 gives wrong result)

Hi gurus,
0CRM_OPPT_H (Transaction RSA3 gives wrong result)
BBPCRM 4.0
BW 3.50 version
I had enhanced the structure "crmt_bw_oppt_h"
and also written a BADI to populate Opportunity header status.
But when I run extract checker RSA3 for CRM data,
I get wrong number of records.
I am having 95 records for Opportunities header data.
Data Records / Call = "100"
Display Extr. Calls = "10"
Above settings, I am retrieving only 61 records.
Data Records / Call = "1"
Display Extr. Calls = "200"
For the above settings in RSA3,
I am able to retrieve 95 records correctly.
The problem is that in RSA1 transaction of BW 3.50 server also,
61 records are being loaded from CRM server.
Could this be a Cache memory problem,
Are any of my BASIS settings a cause for this problem?
Any help is really appreciated and will be rewarded.
Thanks,
Aby Jacob
========

Dear Friends,
I had to do a small correction in my BADI code.
I got a solution from Online SAP HELP portal.
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf4940e11d295df0000e82de14a/frameset.htm
Notes on BADI Usage
====================
The instance generated through the factory method should be declared
as globally as possible or generally be passed as a parameter
to ensure that the initialization process must be run as rarely as possible
just once would be best. In no case should you discard the instance as soon as
it is generated or repeatedly run the initialization process in a loop.
Within the adapter class interface,
required database accesses are buffered locally,
so that each access is executed once only.
However, repeated initialization makes
the buffer useless and dramatically reduces performance.
Due to the local buffering, you can call Business-Add-In methods
without having to expect considerable performance restrictions,
even if no active implementations exist.
Also, if the definition of the Business-Add-In is filter-dependent,
a single instance is sufficient.
However, you should not do without initialization altogether.
Even if you could call static methods of the implementing
class of the Business-Add-In implementation without an instance,
you would lose the benefit of performance improvement through
the Business-Add-Ins and the possibility of multiple use.
If you switch the method type in the interface from the static method
to the instance method at any time in the future,
many code adjustments are required.
In addition, you can no longer use default code that is provided.
Many Thanks to ROBIN
and the whole SDN team
Aby Jacob ,,,,,

The conversion of a nvarchar data type to a datetime data type resulted in an out-of-range value.

Below select statement results in "The conversion of a nvarchar data type to a datetime data type resulted in an out of range value" error. By the way Terms
field's data type is nvarchar
SELECT * from INVOICE
where convert(datetime,Terms)
BETWEEN
'01/01/14'
and
'01/30/15'

If you can't use TRY_CONVERT (It's only available in 2012+) You should be able to validate the data with something like this (based on your example date formats):
DECLARE @notDate TABLE (Terms NVARCHAR(10))
INSERT INTO @notDate (Terms) VALUES
('01/01/14'),('02/29/14'),('01/32/15'),('13/13/14'),('13/3/14'),('13-13/14'),('02/29/12'),('02/29/13')
SELECT *,
CASE WHEN (LEN(Terms) - 2) <> LEN(REPLACE(Terms,'/','')) OR LEN(Terms) <> 8 THEN 'Bad Form'
WHEN LEFT(Terms,2) > 12 THEN 'Bad Month'
WHEN LEFT(Terms,2) IN (9,4,6,11) AND LEFT(RIGHT(Terms,5),2) > '30' THEN 'Bad Day'
WHEN LEFT(Terms,2) = 2 AND LEFT(RIGHT(Terms,5),2) > (28 + CASE WHEN (2000+RIGHT(Terms,2)) % 400 = 0 THEN 1 WHEN (2000+RIGHT(Terms,2)) % 100 = 0 THEN 0 WHEN (2000+RIGHT(Terms,2)) % 4 = 0 THEN 1 ELSE 0 END) THEN 'Bad Day'
WHEN LEFT(Terms,2) NOT IN (2,9,4,6,11) AND LEFT(RIGHT(Terms,5),2) > '31' THEN 'Bad Day'
END
FROM @notDate
Don't forget to mark helpful posts, and answers. It helps others to find relevant posts to the same question.

Numeric value out of range (null) - Inserting a double

Allright,
I can't figure this out to save my life.. I am refusing to put my code up because I am trying to insert into a DB Table with 140 some fields, so I will explain as best I can.. I am trying to insert a double into my DB.. I have been getting a numeric value out of range error on insertion. Just to see if it was a db problem, I shortened my query to 4 fields and two of them being the doubles for insertion. They inserted fine. So needless to say, i presumed that my insert statement for the 140 fields query was off. I double checked it and everything seems to be in order. I still get the error. I can assure that everything matches up.. my SQL string looks like this :
SQL = "INSERT INTO TABLE 1 (VAL1, VAL2, VAL3 ... VAL146) VALUES (?, ?, ? .... ?);
and my preparedStmt :
ps = con.prepareStatement(SQL);
ps.setInt(1, val1);
ps.setInt(2, val2);
ps.setString(3, val3);
ps.setDouble146, val146);
ps.executeUpdate();
Please help me solve this..
Ed

The name of the table is FAC.
Here is the query:
INSERT INTO FAC (FAC_SK, KEY, ACTIVITY, BE_NUMBER,CATEGORY, CC, CLASS_LVL, CONDITION, COORD_BASIS, COORD_DATUM, COORD_DERIV,DOMAIN_LVL, EVAL, GRAPHIC_CC, GRAPHIC_ED_NUM, GRAPHIC_SCALE, GRAPHIC_SERIES,LAST_CHG_USERID, MIDB_TIMESTAMP, OPER_STATUS, OSUFFIX, PROD_LVL_CAP,PROD_LVL_REQ, RECORD_STATUS, RES_PROD, COORD, DATETIME_CREATED,DATETIME_LAST_CHG, FAC_NAME, GRAPHIC_AGENCY, GRAPHIC_ED_DATE,GRAPHIC_SHEET, REVIEW_DATE, ACCESS, AFFILIATION, AIR_DEF_AREA,ALLEGIANCE, BE, CAPACITY, CAPACITY_EVAL, CAPACITY_MAX, CAPACITY_UM,CLASS_RATING, CMD_CNTL_COMM, CODEWORD, CONDITION_AVAIL, CONTROL_MARK,COORD_DERIV_ACC, COORD_DERIV_ACC_UM, COORD_ROA, COORD_ROA_CONF_LVL,COORD_ROA_UM, CPFL, CRITICAL_INDUSTRY, DECLASS_ON, DEGREE_INTEREST,ELEVATION, LAT, LON, ELEVATION_ACC, ELEVATION_CONF_LVL, ELEVATION_DATUM,ELEVATION_DERIV, ELEVATION_DERIV_ACC, ELEVATION_DERIV_ACC_UM, ELEVATION_MSL,ELEVATION_MSL_ACC, ELEVATION_MSL_CONF_LVL, ELEVATION_MSL_DERIV, ELEVATION_MSL_DERIV_ACC,ELEVATION_MSL_DERIV_ACC_UM, ELEVATION_MSL_UM, ELEVATION_UM, FOREIGN_TECH_CC,FOREIGN_TECH_PERCENT, FPA, FUNCT_PRIMARY, FUNCT_SECONDARY, GEOIDAL_MSL_SEPARATION,GEOIDAL_MSL_SEPARATION_UM, ILAT, ILON, INTEGRATION, LINE_QTY, MED_DIAGNOSTICS,MED_MASS_CASUALTY, MIL_AREA, MIL_GRID_SYS, MODERNIZATION, MSN_PRIMARY, MSN_PRIMARY_SPECIALTY,MSN_SECONDARY, MSN_SECONDARY_SPECIALTY, OPEN_STG_COVERED, OPEN_STG_FILLED, OPEN_STG_TOTAL,OPEN_STG_UM, OUTPUT, OUTPUT_EVAL, OUTPUT_MAX, OUTPUT_RATE, OUTPUT_UM, PERIODICITY, PIN,POL_SUBDIV, POP_AREA, POP_AREA_PROXIMITY, POWER_DISTRICT, POWER_DISTRICT_SUB, POWER_SOURCE,RECUP_INTRVL, RECUP_INTRVL_MAX, RECUP_INTRVL_UM, RECUP_LOSS_IMPACT, RECUP_REPAIR_PRIORITY,RELATIVE_RANKING, RELEASE_MARK, ROLE_LVL, ROLE_TYPE, SCALE, TDI, TGT_RESTR, TURN_AROUND_TIME,WAC, WATERBODY, ADDRESS_NAME, CAPACITY_DATE, CAPACITY_EVAL_DATE, COORD_DATETIME,DATETIME_BEGIN, DATETIME_END, DATETIME_FIRST_INFO, DATETIME_LAST_INFO, DECLASS_ON_DATE,LOC_NAME, MAX_DEMO_USE, MIL_GRID, OUTPUT_DATE, OUTPUT_EVAL_DATE, PLACE_NAME, POSTAL_CODE,SCENARIO_SET, STREET_NAME, STREET_NUM, SYMBOL_CODE, UTM) VALUES(?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?);
The query works fine if I have no value for the two doubles : LAT and LON..
If I have a value for them, the thing gives me an error:
Numeric value out of range (null)
If you see anything wrong with that query.. Let me know..
Takizzle

JMS Queue XML numeric value out of range

Hi
I have an interface that process the root element of the JMS message.
It is failing on the step Load JMS to XML. The error states: numeric value out of range.
I've analysed the message and determined the exact data item which is 11 digits long.
The JMS model only accomodates for numeric(10,0). I tried changing it, but still get the error.
Any idea what I need to do so that this step will process that data without error?
Cheers
PS ODI 11.1.1.6

Hi All, I have one scenario to read the source file . The file delimiter is '|' . The no of pipeline for each line is 17. So if a line containing more than 17 , send an error email. For this first i am printing tota pipeline in ecah line to afile called pipelinecount.txt . Then i will read this file and send each value to while loop /for loop , where it will get > 17 , it will exit the process and send an email. But here in script i am getting error at while line. Could anyone help. #! /bin/kshset -x SOURCE_DIR=/vp01/SrcFilessed 's/[^|]//g' /vp01/SrcFiles/Test.txt | awk '{ print length }'> /vp01/SrcFiles/pipelinecount.txtcd $SOURCE_DIRwhile line in `cat pipelinecount.txt`; do if [ $line -eq 17 ];thenecho "No issue in pipeline"exit 0;fiif [ $line -gt 17 ];thenecho "No of pipelines exceeded the expected. Please verify the source file." | mailx -s "WKFS Load: Failed" [email protected]

CRAXDDRT PrintOutEx method throes 'value out of range' error

Hi,
I am using CRAXDDRT.dll for Crystal reports 10 to print a report to a file in afp format.
The following is the scenario:
We have to print out the Tax forms of all the accounts. These forms are printed through an AFP printer. We generate the AFP file and push it to the printer for printing. We create the files each containg10000 accounts. So, we create multiple afp files going in a loop in our code, breaking our files to contain 10000 accounts. For writing the report to a file we use the PrintOutEx method of CRAXDDRT.dll which also takes StartPage number and StopPage numbers as parameters. But when either of the parameters exceeds 32000(int) the method fails with a 'value out of range' error. Do we have any hot fix so that the PrintOutEx method accepts StartPageNum and StopPageNum values more than 32000.
Public crReport As CRAXDDRT.ReportClass
crReport.PrintOutEx(False, piCopiesToPrinter, True, 33000, 38000, sPortName)
Thanks.

CR 10 has been out of patch support since december of 07. See the following for more details:
Business Objects Product Lifecycles [original link is broken]
There is no equivalent API to PrintOutEx in the Crystal Reports SDK for .NET. Thus I understand why you need to use the RDC. However, my suggestion of changing your reference to craxDrt.dll as opposed to craxDDrt.dll still stands due to the two reasons I gave in my previous post (licensing and stability).
I would also consider Don's suggestion re. the 32K limit:
"Only work around I can think of is to limit the number of pages for your print jobs to 32K and then create multiple print jobs to select the same limit. Using Record Selection formula to set the limit, as for the actual page numbers being printed you will likely have to limit them also to 32k, the field may not be able to hold any page numbers higher than 32k."
Finally, another suggestion worth investigating is to see if CR XI release 2 with the latest Service Pack has the same issue. CR XI r2 eval can be downloaded from here:
http://www.businessobjects.com/products/reporting/crystalreports/eval.asp
The latest Service Pack can be downloaded from here:
https://smpdl.sap-ag.de/~sapidp/012002523100013876392008E/crxir2win_sp5.exe
Ludek

Numeric Value Out Of Range Error in Callable Statement

I keep getting an error whenever I try and pass in a value greater than 9000 into my stored procedure. The procedure call looks like this:
sSelect = "execute sp_storedproc ?, ?, ?, ?, ?, ?, ?";
CallableStatement call = objConn.prepareCall(sSelect);
call.setString(1, "TEST"); //DB TYPE = VARCHAR
call.setInt(2, 4); // DB TYPE = INTEGER
//*******************PROBLEM LINE***************************
call.setFloat(3,(float) 9001); //DB TYPE = MONEY
call.setInt(4, 25 ); // DB TYPE = INTEGER
call.setFloat(5,(float) 0); // DB TYPE = MONEY
// output parameters
call.setDouble(6, 0);
call.setDouble(7, 0);
call.registerOutParameter(6, Types.DOUBLE);
call.registerOutParameter(7, Types.DOUBLE);
// execute stored procedure
call.execute();
// retrieve value
val1= call.getDouble(6);
val2= call.getDouble(7);
I keep getting a "[Microsoft][ODBC SQL Server Driver]Numeric value out of range." error.
I'm using MS SQL server 2000. The error only occurs when I pass in values > 9000. Since there's no direct mapping between java data types and SQL MONEY data type, I've tried passing every possible type into the procedure with the same result (e.g. float, long, double, int, BigDecimal). If anyone has come across this problem and knows a solution please help!!
Thanks.

knows a solution please help!!Modify the stored proc so it takes a varchar. In the stored proc convert the string to the correct type. In java use setString() to pass in the value.

Config copy via snmp - value out of range

Hi,
I have problem with configuration file copy via snmp on cisco AP 1121. I use this mib CISCO-CONFIG-COPY-MIB.
I use this oid's and i get error ".1.3.6.1.4.1.9.9.96.1.1.1.1.16.333: Value out of range (<tftp_server_ip>)""
snmpset -v1 -c <rwcommunity> <ap_ip> .1.3.6.1.4.1.9.9.96.1.1.1.1.2.333 i 1
.1.3.6.1.4.1.9.9.96.1.1.1.1.3.333 i 4
.1.3.6.1.4.1.9.9.96.1.1.1.1.4.333 i 1
.1.3.6.1.4.1.9.9.96.1.1.1.1.16.333 inetaddress "<tftp_server_ip>"
.1.3.6.1.4.1.9.9.96.1.1.1.1.16.333: Value out of range (<tftp_server_ip>)
Any Ideas? Thanks for help.

Hi,
I have problem with configuration file copy via snmp on cisco AP 1121. I use this mib CISCO-CONFIG-COPY-MIB.
I use this oid's and i get error ".1.3.6.1.4.1.9.9.96.1.1.1.1.16.333: Value out of range (<tftp_server_ip>)""
snmpset -v1 -c <rwcommunity> <ap_ip> .1.3.6.1.4.1.9.9.96.1.1.1.1.2.333 i 1
.1.3.6.1.4.1.9.9.96.1.1.1.1.3.333 i 4
.1.3.6.1.4.1.9.9.96.1.1.1.1.4.333 i 1
.1.3.6.1.4.1.9.9.96.1.1.1.1.16.333 inetaddress "<tftp_server_ip>"
.1.3.6.1.4.1.9.9.96.1.1.1.1.16.333: Value out of range (<tftp_server_ip>)
Any Ideas? Thanks for help.

Numeric value out of range

Hello, I am getting error of "Numeric value out of range".I've tried increasing Decimal value as well tried chnaginf Intefr to BIGINT.Workflow usd to run fine and all of a sudden it start throwing an error.I've attached session log file.I am using Pushdown optimization and database is netezza. Any help highly appericiated. Regard, Ram

Hi All, I have one scenario to read the source file . The file delimiter is '|' . The no of pipeline for each line is 17. So if a line containing more than 17 , send an error email. For this first i am printing tota pipeline in ecah line to afile called pipelinecount.txt . Then i will read this file and send each value to while loop /for loop , where it will get > 17 , it will exit the process and send an email. But here in script i am getting error at while line. Could anyone help. #! /bin/kshset -x SOURCE_DIR=/vp01/SrcFilessed 's/[^|]//g' /vp01/SrcFiles/Test.txt | awk '{ print length }'> /vp01/SrcFiles/pipelinecount.txtcd $SOURCE_DIRwhile line in `cat pipelinecount.txt`; do if [ $line -eq 17 ];thenecho "No issue in pipeline"exit 0;fiif [ $line -gt 17 ];thenecho "No of pipelines exceeded the expected. Please verify the source file." | mailx -s "WKFS Load: Failed" [email protected]

Error : CLI0111E Numeric value out of range

Hello:
While extracting data through generic datasources, extraction fails in the source system with the following error message.
Database error text........: "CLI0111E Numeric value out of range.
SQLSTATE=22003 row=1 col=12"
Any idea what does this mean?
Thanks

Hello:
While extracting data through generic datasources, extraction fails in the source system with the following error message.
Database error text........: "CLI0111E Numeric value out of range.
SQLSTATE=22003 row=1 col=12"
Any idea what does this mean?
Thanks

Bcp import error numeric value out of range

lo, I have table with columns of type int. I export this table by using bcp:
bcp dbo.int_table out file.dat -q -CRAW -T -S localhost -E .
Now I want to import it to table with columns of type bigint. I use bcp command:
bcp dbo.bigint_table in file.dat -q -CRAW -T -S localhost -E
I get error:
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
i was trying import table by using format file created based on bigint_table by command:
bcp dbo.bigint_table in file.dat -f format_file_bigint.xml -q -CRAW -T -S localhost -E
but i also gets the same errors.
Can I use format file when during export was used -CRAW option????

int table:
CREATE TABLE [INT_TABLE](
   [ID] [int] IDENTITY(1,1) NOT NULL,
   [COL1] [int] NOT NULL,
    [COL2] [datetime] NOT NULL,
   [COL3] [datetime] NOT NULL,
   [COL4] [datetime] NOT NULL,
    [COL5] [datetime] NOT NULL,
   [COL6] [bit] NOT NULL,
   [COL7] [bit] NOT NULL,
   [COL8] [numeric(15,2)] NOT NULL,
   [COL7] [numeric(15,2)] NOT NULL,
   [COL8] [numeric(15,2)] NOT NULL,
   [COL9] [int] NOT NULL,
   [COL10] [int] NOT NULL,
   [COL11] [datetime] NULL
big int table:
CREATE TABLE [BIGINT_TABLE](
   [ID] [int] IDENTITY(1,1) NOT NULL,
   [COL1] [int] NOT NULL,
    [COL2] [datetime] NOT NULL,
   [COL3] [datetime] NOT NULL,
   [COL4] [datetime] NOT NULL,
    [COL5] [datetime] NOT NULL,
   [COL6] [bit] NOT NULL,
   [COL7] [bit] NOT NULL,
   [COL8] [numeric(15,2)] NOT NULL,
   [COL7] [numeric(15,2)] NOT NULL,
   [COL8] [numeric(15,2)] NOT NULL,
   [COL9] [bigint] NOT NULL,
   [COL10] [bigint] NOT NULL,
   [COL11] [datetime] NULL
The int table was exported by bcp command:
bcp int_table out 'c:\int_table.dat' -q -N -T -C RAW -S localhost
and i try import it by command:
bcp bigint_table in 'c:\int_table.dat' -T -C RAW -q -S localhost -E
then i get this errors:
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0
Error = [Microsoft][SQL Native Client]Numeric value out of range
SQLState = 22003, NativeError = 0

GetFloatProperty gives wrong result for values out of range

Similar Messages

Maybe you are looking for