Getmsg() return -1 while trying read /dev/arp
Hi,
I am working on a application that needs to maintain a cache of route entries. For that purpose I am trying to open a stream to "/dev/arp" via the 'open()' call and then start reading the route table.
While doing so, around 1 in say 1000 attempts, the getmsg() fails while reading the 'data part'. Among the rest it works perfectly well.
Any idea why this might be happening?
By the way, I am using Solaris 10 07/08
-Mounish
HOW did you increase the heap space? As that is the only solution you have in this case really.
It is a known fact that POI can use up a lot of memory for big spreadsheets. If at all possible, I would try to switch to plain text comma separated files / tab delimited files. If you cannot do that, I would try to put a size restriction on the sheets that your application will process to get rid of the heap space risk. A sheet can contain 20000 records, or four sheets can contain 5000 records; in both cases you process the exact same data, but at only 25% of the total memory usage.
Similar Messages
-
Xslt copy-of creates a xml which returns empty while trying to access elements using XPATH
Hi
I am trying to do a copy-of function using the XSLT in jdev. This is what I do
<xsl:param name="appdataDO"/>
<xsl:template match="/">
<ns1:applicationData>
<ns1:applicationId>
<xsl:value-of select="$appdataDO/ns1:applicationData/ns1:applicationId"/>
</ns1:applicationId>
<xsl:copy-of select="/fslo:ExternalapplicationData/fslo:ApplicationsHDRAddInfo">
</xsl:copy-of>
</ns1:applicationData>
</xsl:template>
</xsl:stylesheet>
After this I can see the document created in the process flow as this :
<ns1:applicationData>
<ns1:applicationId>MMMM</ns1:applicationId>
<ns2:ApplicationsHDRAddInfo>
<ns3:genericFromBasePrimitive>iuoui</ns3:genericFromBasePrimitive>
<ns4:EstimatedMarketValue>77</ns4:EstimatedMarketValue>
<ns4:PropertyInsuranceFee>jih</ns4:PropertyInsuranceFee>
<ns4:LoanOriginationFee>hjh</ns4:LoanOriginationFee>
<ns4:RegistrarFee>kkkkk</ns4:RegistrarFee>
<ns4:LoanCashInFee>hjh</ns4:LoanCashInFee>
<ns4:LoanPaidInCashFlag>cddffgd</ns4:LoanPaidInCashFlag>
</ns2:ApplicationsHDRAddInfo>
</ns1:applicationData>
But whenever I am trying to extract any of the output nodes I am getting an empty result. I can copy the whole dataset into similar kind of variable.
But I am unable to get individual elements using XPATH.
I tried using exslt function for node set and xslt 2.0 without avail.
The namespaces might be the culprit here . The test method in the jdev is able to output a result but at runtime the xpath returns empty .
I have created another transform where I try to copy data from the precious dataobject to a simple string in another data object .
This is the test sample source xml for the transform created by jdev while testing with all namespaces, where I try to copy the data in a simple string in another data object.
<applicationData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/bpmpa/fs/ulo/types file:/C:/JDeveloper/NewAPP/Xfrm/xsd/ApplicationData.xsd" xmlns="http://xmlns.oracle.com/bpmpa/fs/ulo/types">
<applicationId>applicationId289</applicationId>
<ApplicationsHDRAddInfo>
<genericFromBasePrimitive xmlns="http://xmlns.oracle.com/bpm/pa/extn/types/BasePrimitive">genericFromBasePrimitive290</genericFromBasePrimitive>
<EstimatedMarketValue xmlns="http://xmlns.oracle.com/bpm/pa/extn/headerCategories/">291</EstimatedMarketValue>
<PropertyInsuranceFee xmlns="http://xmlns.oracle.com/bpm/pa/extn/headerCategories/">PropertyInsuranceFee292</PropertyInsuranceFee>
<LoanOriginationFee xmlns="http://xmlns.oracle.com/bpm/pa/extn/headerCategories/">LoanOriginationFee293</LoanOriginationFee>
<RegistrarFee xmlns="http://xmlns.oracle.com/bpm/pa/extn/headerCategories/">RegistrarFee294</RegistrarFee>
<LoanCashInFee xmlns="http://xmlns.oracle.com/bpm/pa/extn/headerCategories/">LoanCashInFee295</LoanCashInFee>
<LoanPaidInCashFlag xmlns="http://xmlns.oracle.com/bpm/pa/extn/headerCategories/">LoanPaidInCashFlag296</LoanPaidInCashFlag>
</ApplicationsHDRAddInfo>
</applicationData>
And the xslt
<xsl:template match="/">
<ns1:DefaultOutput>
<ns1:attribute1>
<xsl:value-of select="/fslo:applicationData/fslo:ApplicationsHDRAddInfo/custom:LoanOriginationFee"/>
</ns1:attribute1>
</ns1:DefaultOutput>
</xsl:template>
This results in a empty attribute1. Any help will be appreciated .Please delete attributeFormDefault="qualified" elementFormDefault="qualified" from your XSD
Please check the next link:
http://www.oraclefromguatemala.com.gt/?p=34 -
Constraint: disable validate returns error while trying to load data
Hi,
I may be missing something but this is what I'm facing:
Table ttab has a primary key, let say ttab_pk, that I modified using this command: alter table ttab modify constraint ttab_pk disable validate.
I thought I would be able to load new data with SQLLoader without any problem (sqlldr userid=myusr/mypwd control=myctl.ctl direct=TRUE), but I keep having this msg:
SQL*Loader-951: Error calling once/load initialization
ORA-02373: Error parsing insert statement for table MYSCHEMA.TTAB.
ORA-25128: No insert/update/delete on table with constraint (MYSCHEMA.TTAB_PK) disabled and validated
In what config the "disable validate" really work ?
Thank a lot for any help.http://download.oracle.com/docs/cd/B10500_01/server.920/a96524/c22integ.htm
# DISABLE NOVALIDATE is the same as DISABLE. The constraint is not checked and is not necessarily true.
# DISABLE VALIDATE disables the constraint, drops the index on the constraint, and disallows any modification of the constrained columns. metalink
Note <Note:69637.1> has a good discussion of DISABLE VALIDATE -
LPX-00601: Invalid token in: err while trying to read data from xml
Hey ,
While trying to read data from xml i got err:
LPX-00601: Invalid token in: 'path'
the proc. i'm using to read data from the xml is:
procedure read_xml_file_test (in_filename in varchar2)
is
my_dir varchar2(20) := 'XML_DIR;
cur_emp2 number:=0;
l_bfile BFILE;
l_clob CLOB;
l_parser dbms_xmlparser.Parser;
l_doc dbms_xmldom.DOMDocument;
l_nl dbms_xmldom.DOMNodeList;
l_nl2 dbms_xmldom.DOMNodeList;
l_n dbms_xmldom.DOMNode;
l_n2 dbms_xmldom.DOMNode;
l_temp VARCHAR2(1000);
v_errors internet_clients.errors%type;
src_csid NUMBER := NLS_CHARSET_ID('UTF8');
dest_offset INTEGER := 1;
src_offset INTEGER := 1;
lang_context INTEGER := dbms_lob.default_lang_ctx;
warning INTEGER;
v_count number := 0; --total records
v_count_s number := 0; -- sucsess record
v_count_f number := 0; -- failed record
v_flag varchar2(1);
v_char2 varchar2(1);
v_l1 VARCHAR2(255);
v_l2 VARCHAR2(255);
v_l3 VARCHAR2(255);
v_l4 VARCHAR2(255);
v_l6 VARCHAR2(255);
BEGIN
l_bfile := BFileName(my_dir, in_filename);
dbms_lob.createtemporary(l_clob, cache=>FALSE);
dbms_lob.open(l_bfile, dbms_lob.lob_readonly);
dbms_lob.loadclobfromfile(l_clob, l_bfile, dbms_lob.getlength(l_bfile), dest_offset,src_offset, src_csid, lang_context, warning);
dbms_lob.close(l_bfile);
-- make sure implicit date conversions are performed correctly
dbms_session.set_nls('NLS_DATE_FORMAT','''DD/MM/RR HH24:MI:SS''');
-- Create a parser.
l_parser := dbms_xmlparser.newParser;
-- Parse the document and create a new DOM document.
dbms_xmlparser.parseClob(l_parser, l_clob);
l_doc := dbms_xmlparser.getDocument(l_parser);
-- Free resources associated with the CLOB and Parser now they are no longer needed.
dbms_lob.freetemporary(l_clob);
dbms_xmlparser.freeParser(l_parser);
-- Get a list of all the nodes in the document using the XPATH syntax.
l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');
-- Loop through the list and create a new record in a tble collection
-- for each record.
FOR cur_emp IN 0 .. dbms_xmldom.getLength(l_nl) - 1 LOOP
l_n := dbms_xmldom.item(l_nl, cur_emp);
cur_emp2:=0;
loop
v_count := v_count + 1;
begin
-- Use XPATH syntax to assign values to he elements of the collection.
dbms_xslprocessor.valueOf(l_n,'L1/text()',v_l1);
dbms_xslprocessor.valueOf(l_n,'L2/text()',v_l2);
dbms_xslprocessor.valueOf(l_n,'L3/text()',v_l3);
dbms_xslprocessor.valueOf(l_n,'L4/text()',v_l4);
dbms_xslprocessor.valueOf(l_n,'L6/text()',v_l6);
exception
when others then
null;
end;
exit when cur_emp2=dbms_xmldom.getLength(l_nl2);
END LOOP;
end loop;
-- Free any resources associated with the document now it
-- is no longer needed.
dbms_xmldom.freeDocument(l_doc);
--remove file to another directory
--COMMIT; -- do not use the commit if you want to run this proc. from within the search_dir_list proc , because it execute a select from tmp table dir_list which contain a "on commit delete rows" clause.
/*EXCEPTION
/*WHEN OTHERS THEN
dbms_lob.freetemporary(l_clob);
dbms_xmlparser.freeParser(l_parser);
dbms_xmldom.freeDocument(l_doc);
null;
ROLLBACK; */
END;While trying to execute this i got:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in: 'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP'
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 939
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 967
ORA-06512: at "MARKET.READ_XML_FILE_TEST", line 51
ORA-06512: at line 1
i guess i mised somthing at the line
l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');i attached here part of my xml:
<?xml version="1.0" encoding="UTF-8" ?>
- <soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <soap:Body>
- <GetFieldsNameResponse xmlns="http://tempuri.org/">
- <GetFieldsNameResult>
- <xs:schema id="DataSet_FRM_GANERIC_PROP" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
- <xs:element name="DataSet_FRM_GANERIC_PROP" msdata:IsDataSet="true" msdata:Locale="he-IL">
- <xs:complexType>
- <xs:choice minOccurs="0" maxOccurs="unbounded">
- <xs:element name="FRM_GANERIC_PROP">
- <xs:complexType>
- <xs:sequence>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
- <diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1">
- <DataSet_FRM_GANERIC_PROP xmlns="">
- <FRM_GANERIC_PROP diffgr:id="FRM_GANERIC_PROP1" msdata:rowOrder="0">
<L1>val1</L1>
<L2>val2</L2>
<L3>val3</L3>
<L4>val4</L4>
<L6>val6</L6>
</FRM_GANERIC_PROP>
</DataSet_FRM_GANERIC_PROP>
</diffgr:diffgram>
</GetFieldsNameResult>
</GetFieldsNameResponse>
</soap:Body>
</soap:Envelope>I Guess it somthing that have to do with node definition ,
but i have tried so many combinations and none ot those worked for me.
i'm deeply stuck here.
What do i miss here?
THANKS yair
Edited by: yair_k on 02:30 14/10/2010Hey , after got a lot of success with the xml reading part , i wonder if you
can help me with a problem while trying to reading that xml from a web service.
i use a procedure as followes:
FUNCTION read_from_web_service(in_username in varchar2 , in_password in varchar2)
RETURN CHAR
AS
l_service UTL_DBWS.service;
l_call UTL_DBWS.call;
l_a_ns VARCHAR2(32767);
l_wsdl_url VARCHAR2(32767);
l_namespace VARCHAR2(32767);
l_service_qname UTL_DBWS.qname;
l_port_qname UTL_DBWS.qname;
l_operation_qname UTL_DBWS.qname;
l_xmltype_in SYS.XMLTYPE;
l_xmltype_out SYS.XMLTYPE;
l_return VARCHAR2(32767);
BEGIN
l_wsdl_url := 'http://www.company.com/publisherService/ServiceGetpublisherTable.asmx?wsdl';
l_namespace := 'http://tempuri.org/';
l_service_qname := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTable');
l_port_qname := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTableSoap');
l_operation_qname := UTL_DBWS.to_qname(l_namespace, 'GetFieldsName');
l_service := UTL_DBWS.create_service (
wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
service_name => l_service_qname);
l_call := UTL_DBWS.create_call (
service_handle => l_service,
port_name => l_port_qname,
operation_name => l_operation_qname);
l_xmltype_in := SYS.XMLTYPE('<?xml version="1.0" encoding="utf-8"?>
<GetFieldsName xmlns="' || l_namespace || '">
<user>' || in_username || '</user>
<password>'|| in_password || '</password>
</GetFieldsName>');
l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
request => l_xmltype_in);
UTL_DBWS.release_call (call_handle => l_call);
UTL_DBWS.release_service (service_handle => l_service);
l_return := l_xmltype_out.extract('//GetFieldsName/text()').getstringVal();
dbms_output.put_line(l_return);
RETURN l_return;
END;but when i run it i got message:
ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException: Server did not recognize the value of HTTP Header SOAPAction: .
regarding the line:
l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
request => l_xmltype_in);
So , i deeply stuck here!
my web service description is:
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
- <wsdl:types>
- <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/">
- <s:element name="GetFieldsName">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetFieldsNameResponse">
- <s:complexType>
- <s:sequence>
- <s:element minOccurs="0" maxOccurs="1" name="GetFieldsNameResult">
- <s:complexType>
- <s:sequence>
<s:element ref="s:schema" />
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetMSG_ByUser_Not_Readed">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetMSG_ByUser_Not_ReadedResponse">
- <s:complexType>
- <s:sequence>
- <s:element minOccurs="0" maxOccurs="1" name="GetMSG_ByUser_Not_ReadedResult">
- <s:complexType>
- <s:sequence>
<s:element ref="s:schema" />
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="SetMSG_ByUser_Not_Readed_As_Readed">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Rec_Id" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="SetMSG_ByUser_Not_Readed_As_ReadedResponse">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="SetMSG_ByUser_Not_Readed_As_ReadedResult" type="s:boolean" />
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</wsdl:types>
- <wsdl:message name="GetFieldsNameSoapIn">
<wsdl:part name="parameters" element="tns:GetFieldsName" />
</wsdl:message>
- <wsdl:message name="GetFieldsNameSoapOut">
<wsdl:part name="parameters" element="tns:GetFieldsNameResponse" />
</wsdl:message>
- <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapIn">
<wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_Readed" />
</wsdl:message>
- <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapOut">
<wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_ReadedResponse" />
</wsdl:message>
- <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapIn">
<wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_Readed" />
</wsdl:message>
- <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapOut">
<wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_ReadedResponse" />
</wsdl:message>
- <wsdl:portType name="ServiceGetpublisherTableSoap">
- <wsdl:operation name="GetFieldsName">
<wsdl:input message="tns:GetFieldsNameSoapIn" />
<wsdl:output message="tns:GetFieldsNameSoapOut" />
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<wsdl:input message="tns:GetMSG_ByUser_Not_ReadedSoapIn" />
<wsdl:output message="tns:GetMSG_ByUser_Not_ReadedSoapOut" />
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<wsdl:input message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapIn" />
<wsdl:output message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapOut" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="ServiceGetpublisherTableSoap" type="tns:ServiceGetpublisherTableSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="GetFieldsName">
<soap:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<soap:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<soap:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:binding name="ServiceGetpublisherTableSoap12" type="tns:ServiceGetpublisherTableSoap">
<soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="GetFieldsName">
<soap12:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<soap12:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<soap12:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="ServiceGetpublisherTable">
- <wsdl:port name="ServiceGetpublisherTableSoap" binding="tns:ServiceGetpublisherTableSoap">
<soap:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
</wsdl:port>
- <wsdl:port name="ServiceGetpublisherTableSoap12" binding="tns:ServiceGetpublisherTableSoap12">
<soap12:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>also i have to mention that i have changed publisher references inside the code , and i also canot
supply username and password , so i guess you canot test it. still i not shure if my definitions (namespace est.) inside my code defined correctly.
hope you can help me with this.
regards
yair -
Bad magic number in super-block while trying to open /dev/sda2
hello,
So I've a linux partition, and then I wanted to install a Windows copy. I've only 1 HDD with differents partition into it:
sda5 (swap)
sda6 /user
sda7/var
sda8 / (which contain the boot and root of course)
sda3 /home
sda2 NTFS (windows xp)
So, as I had linux installed before windows, I had to make my sda2 NTFS (87) under my cfdisk. Then, I went to install windows, everything worked fine, windows booted with his boot system, but I had to restore grub with my archlinux live cd:
grub> find /boot/grub/stage1
grub>root (hd0,7)
grub>setup (hd0)
everything worked successfully, my grub loaded till while booting archlinux I got this error:
couldn't find ext2 superblock, trying backup blocks...
e2fsck: Bad magic number in super-block while trying to open /dev/sda2
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
What I tried is to run the e2fsck -b 8193 /dev/sda2 but right after that, I thought about it, this isn't linux partition so of course, the superblock isn't the same as they are ntfs type from widnows?
I've read on some forum but unfortunately didn't solve my problem, if anyone has any suggestion before I format the NTFS partition, I'd really appreciate it.
best regards, mazwhat I think it happened, is that after installing windows your partitions numbers got twisted a bit. What you have to do is to edit /etc/fstab, and check out your linux and swap partitions mounting entries, I believe you just have to change the number of /dev/sda[number] coresponding to your linux partition in fstab
If you can't solve it, post the output of
fdisk -l
and
cat /etc/fstab
Last edited by I'mGeorge (2011-07-21 20:53:31) -
Informix: Error while trying to set up start or end key for index read
Hi all
Im moving an application from weblogic 6.1 to 8.1, we're using informix as our databasemanager and are using informix's XA driver. However im running into the following error:
SQL State: IX000, Exception: java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release],
SQL ErrorCode: -9847, Error Message: [Internal] Error while trying to set up start or end key for index read [fmstopset_release], RSAM ErrorCode: -101
...while accessing a table.
The same code runs fine twice, but the third and following times it fails with the above error code. I've tried setting the various XA flags available in the weblogic console but with no success so far.
Anyone have any input to this problem? Ive not seen many postings about this error out in the cyberspace and the fews ive seen never gets any response...so i just have to hope anyone in here know anything about it.
Best regards
JMUlf Akerberg wrote:
Hello
I managed to work around my problem by setting the "statement cache size" in the jdbc connection pool to 0. At least that seems to be a work around, im not fully happy with it.
I attach the stack trace from the exception, perhaps it will give someone an idea.
Btw, we're using sun.jdbc.rowset.ExtendedCachedRowSet to populate the resultset to a "disconnected resultset" which the application works with instead of the resultset. Any statements and resultsets that are created are closed before returning the ExtendedCachedRowSet to the application.
If the application works when statement caching is turned off, then it implies a bug in the
informix driver to do with re-using a prepared statement. Is the PreparedStatement used
the same way each time? (the one at AbstractDAO.java:166) What I mean to ask is, If/when
this statement is created with a given SQL string, are the parameters for that SQL always
set the same way?
thanks,
Joe
>
2004-09-10 15:45:05,603 ERROR [ExecuteThread: '14' for queue: 'weblogic.kernel.Default'] - SQLException: Generic SQL failed:
SELECT d.*,dt.dokument_typ FROM dokument d, OUTER dokument_typ dt WHERE d.dok_typ_id = dt.dok_typ_id AND d.dokument_id = ? ( 0:894),
SQL State: IX000, Exception: java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release],
SQL ErrorCode: -9847, Error Message: [Internal] Error while trying to set up start or end key for index read [fmstopset_release], RSAM ErrorCode: -101
java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release]
at com.informix.jdbc.IfxSqli.addException(IfxSqli.java:3105)
at com.informix.jdbc.IfxSqli.receiveError(IfxSqli.java:3419)
at com.informix.jdbc.IfxSqli.dispatchMsg(IfxSqli.java:2282)
at com.informix.jdbcx.IfxXASqli.receiveMessage(IfxXASqli.java:119)
at com.informix.jdbc.IfxSqli.sendStatementQuery(IfxSqli.java:1464)
at com.informix.jdbc.IfxSqli.executeStatementQuery(IfxSqli.java:1403)
at com.informix.jdbc.IfxSqli.executeStatementQuery(IfxSqli.java:1333)
at com.informix.jdbc.IfxResultSet.executeQuery(IfxResultSet.java:223)
at com.informix.jdbc.IfxStatement.executeQueryImpl(IfxStatement.java:843)
at com.informix.jdbc.IfxPreparedStatement.executeQuery(IfxPreparedStatement.java:244)
at weblogic.jdbc.wrapper.PreparedStatement.executeQuery(PreparedStatement.java:80)
at infrastructure.dao.AbstractDAO.genericSqlRead(AbstractDAO.java:166)
at se.migrationsverket.dhs.domain.dao.DokumentDAO.findByDokId(DokumentDAO.java:64)
at se.migrationsverket.dhs.domain.dao.DokumentDAO.findByDokId(DokumentDAO.java:43)
at se.migrationsverket.dhs.generator.impl.pipeline.LoadDocumentPipeline.buildMultiDocument(LoadDocumentPipeline.java:99)
at se.migrationsverket.dhs.generator.impl.pipeline.LoadDocumentPipeline.process(LoadDocumentPipeline.java:53)
at se.migrationsverket.dhs.generator.impl.DHSDocumentGenerator.loadDocument(DHSDocumentGenerator.java:63)
at se.migrationsverket.dhs.generator.DocumentGeneratorInternalHelper.loadDocument(DocumentGeneratorInternalHelper.java:129)
at se.migrationsverket.dhs.services.document.internal.InternalDocumentManagerBean.loadDocument(InternalDocumentManagerBean.java:185)
at se.migrationsverket.dhs.services.document.internal.InternalDocumentManager_6sz7e8_EOImpl.loadDocument(InternalDocumentManager_6sz7e8_EOImpl.java:532)
at se.migrationsverket.dhs.action.documentgenerator.GeneratorAction.load(GeneratorAction.java:147)
at se.migrationsverket.dhs.action.documentgenerator.GeneratorAction.perform(GeneratorAction.java:49)
at se.migrationsverket.dhs.servlet.AbstractController.doPost(AbstractController.java:84)
at se.migrationsverket.dhs.servlet.AbstractController.doGet(AbstractController.java:54)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6310)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Regards
JM -
Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?
it seems my subscription had expired so I signed up again.. It was still having trouble so I repeated the sign up process again.. Then it worked perfectly.. Unfortunately, I think I just subscribed twice and need to cancel one of them. Ugh. Such a pain when I'm trying to get this project completed. I'll be canceling at least one of the subscriptions in the morning. Adobe is not my favorite company right now. None of this was intuitive. And trying to get help was an absolute waste of an hour.
Regards,
Nathaniel
[removed by moderator] -
An error occured while trying to read data
Hi RoboHelpers,
While opening my main project today (large project w/ thousands of topics) my project froze twice and wasn't responding, so I forced it to close via Task Manager and deleted the CPD file, thinking it was the culprit.
I then got this error when I tried to reopen the .XJP file:
"An error occurred while trying to read data from
<D:\Hg\PcdmisQA\Pcdlrn\CoreHelp\13_hardware_topics\13_hardware_topics.fpj><1>."
I clicked OK to get past this error, and now my htms are not appearing inside the Topic List for 13_hardware_topics and the TOC links show that the topics don't exist. But the .htms do exist inside the actual directory in Windows.
I think I can fix this by importing the .htms inside 13_hardware_topics, but I'm not sure why it happened in the first place. Is there a way to just fix the .fjp file instead--if this is indeed the problem?
My 13_hardware_topics.fjp structure looks like this (sorry for the post length):
<?xml version="1.0" encoding="utf-8"?>
<rhpml majorversion="2" minorversion="0">
<folders/>
<topics>
<topic>
<name>Tool_ID.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Probe_Description.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Defining_Hardware.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Defining_Hardware_Introduction.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>List_of_Available_Tools.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Tool_Type.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Understanding_the_Probe_Utilities_dialog_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>use_trax_calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Defining_Probes.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Use_Partial_Calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Probe_File_Name.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>User_Defined_Calibration_Order_check_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Search_Override_I_J_K.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Optical.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Showing_an_Animated_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Using_the_Quick_Fixture_Dialog_Box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Inserting_Quick_Fixtures.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>print_list.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>example_printout.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Defining_Machines.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Selecting_or_Creating_a_Machine_for_Display.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Deleting_the_LOADMACHINE_Command.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Ball.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Removing_the_Animated_Machine_from_the_Graphics_Display_Window.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>collision_tolerance.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Optical_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_on_the_Machine_s_Axes.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Probe_Setup.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>autocalibrate_probe.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Specifying_Collision_Tolerances.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Using_Existing_Quick_Fixtures.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_4_-_Begin_Calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_3_-_Define_Ports.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_8_-_Measuring_Port_2.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_6_-_Measuring_Port_1.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_7_-_Measuring_Port_3.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_9_-_Review_Calibration_Results.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Displaying_Existing_Machines_in_the_Graphics_Display_Window.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Calibrating_the_FCR25_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Inserting_and_Removing_Quick_Fixtures.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Selecting_the_No_Machine_Item.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_on_the_Machine_s_Home_Position_area.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Deleting_the_Machine.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>defining_probe_changers.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Quick_Fixture_Mode_s_Mouse_and_Keyboard_Commands.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Adding_Custom_Fixtures.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>add_tool.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>With_Averaging.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Shank_Optical_Vector_I_J_K.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Fast_Probe_Mode.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>X_Y_and_Z_Center.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Delete_Tool.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ScanRdv.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>available_tip_types.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Thickness_of_the_ball_tip.htm</name>
<name>PrbRdv.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Edit.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Shank_Vector_I_J_K.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Ball_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>edit_probe_components.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Edit_Tool.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Ball_Tip.htm</name>
<name>To_delete_a_wrist_angle.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Probe_Setup.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Measure.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Disk_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>PrbRdv.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Previewing_your_Probe_Configuration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>use_unit_calibration_data.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>New_Angles_List_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>To_Display_the_Probe_Changer_in_the_Graphics_Display_window.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>calibration_date_and_time.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Global_Used.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Individual_Angle_Data.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Barrel_Shank_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>calibration_date_and_time.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Equally_Spaced_Angles_Data.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Reset_Tips.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Disk_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>use_unit_calibration_data.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>dmis_label.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>add_angles.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Notes_on_the_Add_Angle_option.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Working_with_the_Angle_Grid.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>available_tip_types.htm</name>
<name>calibration_date_and_time.htm</name>
<name>Results.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Ball_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Reset_Tips.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Diameter_Length.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Previewing_your_Probe_Configuration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>User_Defined_Calibration_Order_check_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Use_Wrist_Map_If_Available_check_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Diameter_Length.htm</name>
<name>Use_Wrist_Map_If_Available_check_box.htm</name>
<name>Probe_Description.htm</name>
<name>List_of_Available_Tools.htm</name>
<name>Probe_File_Name.htm</name>
<name>use_trax_calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_2_-_Define_the_Mount_Point.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Use_Partial_Calibration.htm</name>
<name>Probe_Description.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>autocalibrate_probe.htm</name>
<name>Search_Override_I_J_K.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Disk.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Calibrating_the_ACR1_Probe_Changer.htm</name>
<name>Step_1_-_Select_the_FCR25_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>example_printout.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>defining_probe_changers.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Calibrating_the_CW43_Probe_Changer.htm</name>
<name>Optical.htm</name>
<name>example_printout.htm</name>
<name>To_Display_the_Probe_Changer_in_the_Graphics_Display_window.htm</name>
<name>defining_probe_changers.htm</name>
<name>Inserting_Quick_Fixtures.htm</name>
<name>Shank.htm</name>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_9_-_Review_Calibration_Results.htm</name>
<name>Additional_Information_on_the_Machine_s_Axes.htm</name>
<name>Step_5_-_Prepare_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
<name>Probe_Setup.htm</name>
<name>Selecting_or_Creating_a_Machine_for_Display.htm</name>
<name>Step_6_-_Measuring_Port_1.htm</name>
<name>Step_9_-_Review_Calibration_Results.htm</name>
<name>Quick_Fixture_Mode_s_Mouse_and_Keyboard_Commands.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<name>Step_6_-_Measuring_Port_1.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Inserting_and_Removing_Quick_Fixtures.htm</name>
<name>SP600__Step_3_-_Prepare_for_Calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Selecting_the_No_Machine_Item.htm</name>
<name>Deleting_the_Machine.htm</name>
<name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
<name>SP600__Step_6_-_Take_the_Third_Manual_Hit.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>SCP600__Step_2_-_Define_the_Mount_Point.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Showing_an_Animated_Probe_Changer.htm</name>
<name>ACR1__Step_1_-_Select_the_ACR1_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</name>
<name>ACR1__Step_3_-_Define_the_Mount_Point.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_4_-_Define_Ports.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_5_-_Prepare_for_Calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_6_-_Measure_Port_1.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_7_-_Measure_Port_8.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_9_–_Measuring_Datum_Sphere_with_PEM_Extension(s)_(optional).htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>SP600__Step_4_-_Take_the_First_Manual_Hit.htm</name>
<name>Step_1_-_Select_the_SP600_Probe_Changer.htm</name>
<name>ACR1_Step_10_Review_Calibration_Results.htm</name>
</topics>
</rhpml>
Thanks,
JaredHi Jared.
I don't know if this is at the root cause of the error but I see that the closing </name> tag has a number of instances where there is a spurious space inside it:
<topic>
<name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</ name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_on_the_Machine_s_Home_Position_area.htm< /name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</n ame>
<comments></comments>
<frameset>0</frameset>
</topic>
There are others.
The RoboColum(n)
@robocolumn
Colum McAndrew -
When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I am using Adobe Reader with paid up service through May 2015. When I attempt to convert a file either to PDF or from PDF, I get the error message, "An error occurred while trying to access the service". What do I need to do to get access to the service I have paid for?
Hi DeaconTomColorado,
Please see "Error occurred when trying to access this service" when logging on to Acrobat.com.
Adobe has just released an update to Adobe Reader, so if you're accessing the service via Reader, please let us know whether the update helps resolve the issue.
Best,
Sara -
"An error occurred while trying to access the service" - Even after I have signed into Adobe reader
I have signed into adobe reader and I am trying to convert a PDF to a word document. All I get every time is, "An error occurred while trying to access the service" My account is active and paid for. Please help me with this. I have tried a number of different documents. I pay to use this service!
Thank you for your quik reply.
Please try to login at https://exportpdf.acrobat.com/signin.html with your Adobe ID and password. Please let me know this web UI does not work.
Thank you again
Hisami -
Hello,
While trying to update Adobe Reader XI 10.0.06 to 10.0.07 on my laptop running W7 Home Premium x 64, I get error message 2203. The same occurs if I try to uninstall before manually install the new version. Can you please help?
PS.- Thank you very much for your Support in trying to solve a problem created by yourselves.
Message was edited by: Juan VeranoIs there anything else beside the number 2203?
Try removing the current Reader using http://labs.adobe.com/downloads/acrobatcleaner.html, then install 11.0.07 from http://get.adobe.com/reader/enterprise/ -
While trying to download adobe reader Error msg: already have a more productive application?
while trying to download adobe reader Error msg: already have a more productive application?
if you're using windows, click the start button>control panel>uninstall programs> and check for adobe acrobat and adobe reader. don't uninstall anything if you find it.
but if you find no acrobat/reader run the cleaner (Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and then try and install adobe reader. -
Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts. Pleas advise as Blurb has said that it's a LR issue.
Are you behind a firewall or double NAT??
What is the device that is immediately plugged into the main modem or router? Has that one been able to update?
It is plugged in of course isn't it.. no nasty join wireless anywhere??
The best way to work around these sort of problems is to simplify the network.. Plug each device directly into the main router.. by ethernet. You can trigger the firmware upgrade by wireless but use ipad or iphone version of airport utility and see what happens. -
I have SCCM 2012 SP1 recently upgraded to R2. I'm currently setting this up to migrate my production 2007 site. However, I'm trying to use Content Library Explorer on my DP's. I have 3 dps. DP2 connects fine but when i try and connect to DP1 +3 i get
the following error: An error occurred while trying to read the package metadata. The package
PackageID is invalid and must be redistributed from the Configuration Manger console.
Now i can't find any trace of this at all in the console. In the SMSPackagesHist table i can see the package ID and the deleted time was 29-07-2013. This most likely was me trying to create software updates back last year when i initially setup the site.
The package is not listed as content on any of the 3 DPs and i can't find any trace of it at all in the console.
I'm not very familiar with 2012, so not sure what I've done.
Any help or advice appreciated.
Thanks
JaneHi Torsten,
thanks for this. I did a search of the WMI key and found this document: http://blogs.technet.com/b/configmgrteam/archive/2012/05/07/troubleshooting-content-mismatch-warnings-on-a-distribution-point-in-system-center-2012-configuration-manager.aspx (does
this mean it is supported?)
however, on those 2 DP's in that class, the suspect package ID is not listed!???
Any more ideas?
Many thanks
Jane
Maybe you are looking for
-
HT1766 My phone was stolen how can I get the data that's stored in the clouds ?
I'm primarily needing my calendars and my contacts ?
-
How can i get the value stored in the session object using its sessionid
how can i get the value stored in the session object using its sessionid by running stand alone java application
-
Text a location with google maps?
Hi: I just bought a iphone yesterday and I am curious if this is possible: Sending a message to someone (SMS) saying, lets meet at this location, and post a google maps link to that location so that person can click on it and go to that location onli
-
Script:how to solve the following
Hi to all, Can u please tell me how to solve the following: Created standard texts, styles, character strings and called them in layout sets copied the standard layout set from client '000' further modified the layout according to requirements. Thank
-
Folks, I`ve been researching the LDAP sync option in OIM 11g and I have some questions. 1. Is it true that once enabled, the user does not exist in OIM DB but only in LDAP? 2. Can we define rules such that only a certain set of users are in LDAP and