Gettign error when using Adobe interactive UI in WDP ABAP

Hi Frnds,
Am doing an WDP ABAP object where i need to use Adobe interactive Form, its a simple basic level app, when am deploying the Adobe am getting the following error
The following error text was processed in the system XYZ : Function module does not exist
The error occurred on the application server sapcrm_XYZ_01 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Module: %_HTTP_START of program SAPMHTTP
Which is workign very fine in SFP as a Form>interface, when am using this in WDP ABAP than am facing the above error,
If i remove the Interactive UI, its working fine, am expecting that am using Adobe 9.1 version , as i seen in blog it should be 7.1
Regards
Rajesh

Dear friend,
Check the Below link
https://www.sdn.sap.com/irj/sdn/adobe?rid=/webcontent/uuid/24b9e126-0b01-0010-e098-f46384fad9f3

Similar Messages

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Have no idea of what you were even doing in Photoshop my crystal ball is out for repairs so I can not see.

Is it possible to use Adobe Interactive Forms in SAP (ABAP) Trial Version?

Dear All,
i need some help concerning the usage of Adobe Interactive Forms in SAP (ABAP) Trial Version.
I installed SAP Netweaver 7.01 (ABAP Trial Version) and i would like to use the Adobe Interactive Form editor (transaction SFP). Is this trial version prepared for this? Is it possible to edit and test Interactive Forms in the ABAP Trial Version too?
Somebody told me that he installed Adobe Lifecycle Designer 7.1 but the layout manager part of the editor shortdumped when he wanted to go back to other parts of the editor or he wanted to save what he did...
Is it enough to install Adobe Lifecycle Designer 7.1? Is there something else to install or configure?
Thank you for your help in advance.
All the best, P. Phil.

Yes, you need the lifecycle designer installed. That should be enough to work with the SFP transaction. But to actually use the form, I think you do need the ADS(Adobe Document Services) which runs on the java stack.
Regards,
Rich Heilman

Error when calling Adobe Interactive Form

Hi Experts,
I Created a Adobe Form using SFP and integrated into webdynpro abap application,and when i am testing the application its giving the error. and the errror details are.
The following error text was processed in the system RD1 : WebDynpro Exception: The ADS call has failed. You can find information about the cause in the error.pdf on the application server
The error occurred on the application server S0164SAPDEV2_RD1_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CREATE_PDF_DDIC of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
And I searched in SDN and Followed the same steps and still its giving the error and Basis Team is saying that everything is working fine from there side.
Please Provide the Requried Information with steps so that i can close this issuse.
Waiting for Reply.
Thanks & Regards.
Bhushan.

Hi Srinivas,
i tested the program FP_PDF_TEST_00 its working fine . but still i am getting the same error
The following error text was processed in the system RD1 : WebDynpro Exception: The ADS call has failed. You can find information about the cause in the error.pdf on the application server
The error occurred on the application server S0164SAPDEV2_RD1_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CREATE_PDF_DDIC of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
can u give me steps for creating webdynpro adobe form so that i can find out the mistake in my application.
or can u say me how to integrate the smartform in pdf in webdynpro abap.
Please provide me requried information.
Waiting For Reply
Thanks & Regards.
Bhushan.

Unable to close browser when using Adobe Interactive Form

Hello,
I'm using an Interactive Form in my Web Dynpro application. Everything works fine, but when the view with the Interactive Form is active, I am not able to close the browser window anymore. Moving to another view is also not possible.
I already changed all the options of the Interactive Form but always the same behaviour.
I am developing on Web AS 6.40, Service Pack 11. ADS is installed also with Service Pack 11.
Adobe Reader is Version 7.0 and Adobe Designer is Version 7.1
Has anyone an idea what's wrong?
Thanks for your help!
Best regards
Christian

Hi,
I am facing a problem with viewing SAP interactive forms.
I have the SAPForms.api in Adobe reader plugins but is outdated (19th apr, 05). How do I get the new one and how do I register it ? This same scenario works on a colleague's machine with same config except the SAPForms.api which is latest. (Nov, 05)
Any pointers will be highly appreciated.
Thanks,
Samar

Error when using Adobe form in Web Dynpro..

I created an adobe form and gave the form name in template source property of interactive form in web dynpro component.The context node used in that form is automatically created. I pass value to that node using set_static_attributes. When I run the application I am getting an error msg 'Node <node name> does not contain any elements'.Can someone tell me how to solve this problem?

Dear friend,
Check the Below link
https://www.sdn.sap.com/irj/sdn/adobe?rid=/webcontent/uuid/24b9e126-0b01-0010-e098-f46384fad9f3

Keep getting "Download Error" when using Adobe Application Manager. Have tried from different areas.

I'm trying to update my CC Illustrator, as there is an issue that has apparently been resolved with a new update.
Whenever I try to update Illustrator, or even download a new application, I get an error window "Download Error. Try again or contact customer support."
I have tried to download both directly from Adobe Application Manager and from the Creative Cloud website itself. I have restarted my computer. This has been happening for 2 days now. Just can't seem to connect with Adobe Application Manager.
At one point I got a window message that said to check the Adobe Site Status, and all looked green and fine there.
And this forum appears to be the only "customer support" ???! I don't see any chat help or phone help. Is that true?
I can go back to CS4 Illustrator to get the feature that I need (zoom in/out using magic mouse+Option, which is my favorite and essential Illustrator shortcut) but obviously will need to update and download more CC features and programs in the near future.
Thank you for anyone who can help me.
Barbara

You can also use Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools
Direct Download Links for Adobe Software
Are you on a managed network. If yes please refer the Knowledge base article: http://helpx.adobe.com/creative-cloud/help/cc-desktop-download-error.html.
You may even try the direct download: http://prodesigntools.com/adobe-cc-direct-download-links.html.
Kindly follow the very important instructions before download.
It might help you.
Regards
Rajshree

Error when using filter on date column in interactive report

Hi,
I'm getting the following error when using the filter on a date column. None of the criteria in the filter list work. All give me the same error but when I use the filter on a column feature (in the search bar) and use ">" and "<" those work.
Can someone please help me????
" Settledate is in the last 2 years
ORA-30175: invalid type given for an argument ORA-02063: preceding line from MAINDATA "

I have a similar problem . I have an interactive report based on resultset stored in a collection; since all the columns of a collection are of string datatype, I convert the columns to appropriate datatypes before its returned to the user; everything works as desired except when I try to filter on a data column , I get a ORA-01858: a non-numeric character was found where a numeric was expected .
I turned on debug mode and am copying the output here , column c009 which is aliased to 'C' is the one that I am trying to apply the filter on
select
ROWID as apxws_row_pk,
"C001",
"C002",
"C003",
"C004",
"C005",
"C006",
"C007",
"C008",
"CHECKOUTTIMESTAMP",
"C010",
"C011",
"TO_NUMBER(C012)",
"TO_NUMBER(C013)",
"TO_NUMBER(C014)",
"C015",
"C016",
"C017",
"TO_NUMBER(C018)",
"C",
count(*) over () as apxws_row_cnt
from (
select * from (
Select c001,c002,c003,c004,c005,c006,c007,c008,to_date(c009,'dd-MON-yy HH24.MI') checkouttimestamp,
cast(to_date(c009,'dd-MON-yy HH24.MI') as timestamp) c,
--TO_TIMESTAMP(c009,'dd-MON-yy HH24.MI') c1 ,
trunc(to_date(c009,'dd-MON-yy HH24.MI')) checkoutdate,
c010,c011,to_number(c012),to_number(c013), to_number(c014),c015,c016,c017,to_number(c018) from apex_collections where collection_name = 'IR_BOOKSALES'
) r
where ("C" between systimestamp - ((1/24) :APXWS_EXPR_1) and systimestamp)*
) r where rownum <= to_number(:APXWS_MAX_ROW_CNT)
order by ROWID
0.04: IR binding: ":APXWS_EXPR_1"="APXWS_EXPR_1" value="1"
0.04: IR binding: ":APXWS_MAX_ROW_CNT"="APXWS_MAX_ROW_CNT" value="2000"
ORA-01858: a non-numeric character was found where a numeric was expected
I have tried to convert c009 to date, timestamp and timestamp with time zone datatypes ; they all return the same error ,but all 3 datatypes work fine with systimestamp when I run them in sqlplus. Any help would be appreciated.

Error when running Adobe form?

Hi all,
When i ran my Adobe Form appl, I got this error. What to be configured?Plz help me
<b>Error:</b>
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error during call to AdobeDocumentServer: Processing exception during a "UsageRights" operation. Request start time: Tue Nov 29 10:09:22 GMT+05:30 2005 com.adobe.ProcessingError: Credential login error while applying usage rights to PDF: C:\WINNT\Temp\adobewa_J2E_00_17499208\DM-7879321343435588089.dir\DM6867856807703759116.tmp Specific error information: $$$/PDF/PDFCredentialLoginFailure2=error while logging into credential ^0 GeneralError: Operation failed. SecurityHandler.login:-1: Could not open Digital ID file with the password provided. Please try again. General error information: IDL:com/adobe/document/pdf/CredentialLoginFailure:1.0 Exception Stack Trace: com.adobe.ProcessingError: Credential login error while applying usage rights to PDF: C:\WINNT\Temp\adobewa_J2E_00_17499208\DM-7879321343435588089.dir\DM6867856807703759116.tmp Specific error information: $$$/PDF/PDFCredentialLoginFailure2=error while logging into credential ^0 GeneralError: Operation failed. SecurityHandler.login:-1: Could not open Digital ID file with the password provided.

Hi,
Debasish is right. You have to install and configure credentials before you can use Adobe Interactive Forms. Check SAP Library section <a href="http://help.sap.com/saphelp_nw70/helpdata/en/6e/8e22fad84440629b4385748e22b8a0/frameset.htm">Installing and Configuring Credentials</a> for detailed information.
Best regards,
Martin

I cannot open pdf files from one supplier when using Adobe Reader but I can using another Viewer

I cannot open pdf files from one supplier when using Adobe Reader but I can open it if using Google PDF viewer or another viewer. The Adobe reader gives the error "There was an error opening this document. The file is damaged and could not be repaired" when I try to open the file. The version of Adobe Reader is 10.1.7, however I have tried other versions and they all fail the same way. I have tested on a number of different PC's in different networks and all fail using Adobe Reader but work using alternate viewer. Also the PC's will open a PDF from any other source.

Newer Reader versions are more strict than older versions (and other PDF viewers). If certain minimum requirements are not met, Reader will tell you that the PDF is damaged. This can happen when a document was created with software that does not adhere to PDF standards, or when the file was damaged during a download or email transmission.
You should contact the creator of these PDFs.

Error while running adobe interactive form

Hi,
I made a scenario to update a z table using adobe interactive form in webdynpro.While executing I am getting the error as :
Termination type was : RABAX_STATE
Can anyone please guide me as to what can be the reason behind this error.
Thanks in advance !!

Hi
I suggest that you first review your configuration using this tutorial which short and to the point:
[ADS configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03414f8-d4ce-2a10-d4b6-ab201b329d98]
After that perform the tests that were suggested in the posts above (link to the relevant tests [ADS tests|http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f31e3082221595e10000000a1553f7/content.htm]
Regards
Adi J.

Error When Using Class :(

Hey,
Class:
package
    import flash.display.MovieClip;
    import flash.events.Event;
    public class Main extends MovieClip
        public var enemyA:Array = [];
        public var birdA:Array = [];
        public var rowNum:int = 2;
        private var gap:int = 100;
        private var obj_no = 2;
        public var enemy1:mychar = new mychar();
        public var TheBird:BirdChar = new BirdChar();
        public function Main()
            // constructor code
            createEnemyF();
            createBirdF();
            this.addEventListener(Event.ENTER_FRAME,loopF);
        public function createEnemyF()
            for (var i:int = 0; i < rowNum; i++)
                for (var j:int = 0; j < obj_no; j++)
                    enemy1.x = Math.random() * stage.stageWidth - enemy1.width;
                    enemy1.y = - i * (gap + enemy1.height) - 30.65;
                    enemyA.push(enemy1);
                    addChild(enemy1);
        public function createBirdF() {
            TheBird.x = 270.95;
            TheBird.y = 350.95;
            birdA.push(TheBird);
            addChild(TheBird);
        public function loopF(event:Event) {
            updateEnemyPositionsF();
            updateBirdPositionsF();
            hitTestF();
        public function updateEnemyPositionsF() {
            enemy1.y += 2;
        public function updateBirdPositionsF() {
            TheBird.x = mouseX;
        public function hitTestF() {
            if(TheBird.hitTestObject(enemy1))
                gotoAndPlay(5);
                trace('The Bird Hit Enemy 1');
This conflicts and causes this error:
1046: Type was not found or was not a compile-time constant: MouseEvent
^ ^ Code repeats to all of my event listeners
Thanks for your time.

Thanks, i thought it might be this because of previous problems but i seen i already had : import flash.events.Event; so i thought that would be OK!
Second Error:
1180: Call to an undefined method Timer.
I think this is the same sort of thing but what to import to fix this?
So far these are my imports:
    import flash.display.MovieClip;
    import flash.events.Event;
    import flash.events.MouseEvent;
    import flash.events.TimerEvent;
Thanks for helping.
Date: Thu, 3 Nov 2011 05:36:22 -0600
From: [email protected]
To: [email protected]
Subject: Error When Using Class
    Re: Error When Using Class
    created by markerline in Flash Pro - General - View the full discussion
Looks like you imported events.Event but not events.MouseEvent (or some similar syntax) basically you must import MouseEvents separately from other Events.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4005227#4005227
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4005227#4005227. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Flash Pro - General by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Blank page getting displyed whn using adobe interactive forms

Hi All,
I am Facing one problem while using Adobe interactive forms in Web Dynpro.
on deploy interactive form is not getting displayed.
Deployment result shows blank view....
m not getting the cause of the problem.
kindly help if someone knows the cause/solution.
Thanks,
Amit

Hi there,
I am having the same problem. I deployed the same WD with IF on 2 different machines and there everything works fine. I using the same browser (IE6) on all the machines. Where are using Native IF and running Adobe Reader 7.0.8. We are on NW04s SP9.
I tested the ADS Webservice on the machine and that is working fine.....
Hope somebody can tell me where to look.
Thx in advance.
Amit, when you are using IF type "native" the at least run Adobe Reader 7.0.8. Maybe this solves the problem for you.
Kind regards,
Maarten.

Heavy performance issues using Adobe Interactive Form PDFs generated by SAP BPM

Dear experts,
we use Adobe Interactive Form PDFs (generated with LiveCycle Designer) as Human Tasks within SAP BPM processes. The PDFs are generated and transmitted correctly, but when they are opened at the receivers PC, Windows freezes for 2-3 minutes, then the PDF opens and can be filled out and sent back. The next PDFs can be opened much faster, but when the PC is restarted, we get the same problem again. We use Adobe Reader XI (11.0.2) on our clients; is their any know performance issue?
Please note, that we have this problem with EVERY Adobe Interactive Form PDF... I created a simple PDF containing just a field and the client PC still freezes. So it can't be in the form or the scripting. Normal static PDFs can be opend without any problems.
Best regards,
David

They haven't really announced it, because there is no product to announce. Rather the opposite.
There are no conversion tools, so far as I know.
XFA forms are a non-starter if you want portability.
AcroForms are a nightmare in themselves, because the functionality is limited in Adobe Reader and varies between absent and weird in other products. No idea about Blackberry support.
You will not find a simple recommendation. Rather, you need to use Acroforms and carefully test everything (EVERYTHING: no assumptions) on every platform you intend to support.
Yes, rather unsatisfactory, but until Adobe realise that the future is platform equivalence or irrelevance, this is where we are.

Firefox tends to freeze and/or crash when using adobe 9 to make or save pdfs

When using adobe acrobat 9 pro, I have had the experience of Firefox freezing in a "thinking mode" or just straight crashing when printing a pdf of a web page, or even saving a pdf that downloaded. Sometimes, an error stating adobe acrobat plugin failed will load, but not always.

Thank you for your answer, we did not start the deployment of FF3 yet.
FF3 support is still under development (for NW 7.1)
Do you mean that Firefox 3 will not be supported on NW 7.0 ?

Gettign error when using Adobe interactive UI in WDP ABAP

Similar Messages

Maybe you are looking for